Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

α- and β-CoNi binary hydroxides nanostructures: Synthesis, characterization, and application as heterogeneous catalysts

The aim of this study is to show that α- and β-CoNi binary hydroxides nanostructures can be used as heterogeneous catalysts in the oxidation of benzyl alcohol, N-formylation of aniline, and the Claisen–Schmidt condensation. The catalysts were synthesized by hydrothermal method and characterized by XRD, FE-SEM/EDX, FT-IR, TGA, UV–vis and N{sub 2} adsorption-desorption techniques. The α-phase is similar to layered double hydroxide (LDH), while β-phase is isostructural with brucite. In all of the three reactions, the conversion enhanced by increasing the amount of catalysts from 10 to 30 mg, and the catalytic activity of α-phase was better than β-phase. In benzyl alcohol oxidation, the best conversion for α- and β-phases was 90% and 80%, respectively, under solvent-free conditions. In N-formylation, the best yield for both catalysts was obtained 95% in solvent-free conditions. However, the time required for α-phase to reach this amount was a quarter of that for β-phase. For the Claisen–Schmidt condensation, the best yield was obtained at 90 °C, which was 70% and 50% for α- and β-CoNi binary hydroxides, respectively. Both catalysts were stable and subsequent to each step of recovery and reuse, no significant loss in activity was observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructured Al{sub 2}O{sub 3}-TiO{sub 2} coatings for high-temperature protection of titanium alloy during ablation

Plasma-sprayed nanostructured Al{sub 2}O{sub 3}-13 wt.%TiO{sub 2} coatings were successfully fabricated on titanium alloys (Ti-6Al-4V) using as-prepared feedstock. Ablation experiments for the titanium alloy samples with or without a coating were carried out using a Metco 9MB plasma gun. The microstructure, phase constituents and mechanical properties of the titanium alloys before and after ablation were investigated by scanning electron microscope (SEM), X-ray diffractometer (XRD) and Vickers hardness tester. The surface morphologies, cross-sectional microstructure and hardness of titanium alloys with coatings are similar before and after ablation. In contrast, the microstructure and mechanical properties of the titanium alloy without coating are significantly changed after ablation. The surface coating is found to serve as a protective coating during ablation.

36 MATERIALS SCIENCE↗

Structural and microstructural study of nanostructured Fe{sub 50}Al{sub 40}Ni{sub 10} powders produced by mechanical alloying

A nanostructured Fe{sub 50}Al{sub 40}Ni{sub 10} mixture was prepared by mechanical alloying of elemental Fe, Al and Ni powders in a planetary ball mill. Structural and microstructural changes during the milling process were followed by X-ray diffraction technique. The patterns so obtained were analyzed using the Maud program. An ordered B2 FeAl phase is formed after 1 h of milling. The observed lattice expansion is related to the production of antisite defects; Fe{sub Al} and Al{sub Fe}. During the intermediate stages of milling, the mechanical alloying process gives rise to a mixture of two BCC {alpha}{sub i}-Fe(Al,Ni) (i = 1,2) structures with the same crystallite size but different lattice parameters, microstrains and proportions. The BCC {alpha}{sub 2}-Fe(Al,Ni) disappeared after 4 h, only the B2 FeAl and BCC {alpha}{sub 1}-Fe(Al,Ni) solid solution persist over prolonged milling times. - Research highlights: {yields} Fe{sub 50}Al{sub 40}Ni{sub 10} was prepared by MA from Fe, Al and Ni powders in a planetary ball mill. {yields} B2 FeAl is formed after 1 h of MA. Lattice expansion is related to Fe{sub Al} and Al{sub Fe} defects. {yields} MA gives rise to 2 BCC structures with the same L but different a, <{sigma}{sup 2}>{sup 1/2} and %.

36 MATERIALS SCIENCE↗

Impact of high energy ball milling on the nanostructure of magnetite–graphite and magnetite–graphite–molybdenum disulphide blends

Different, partly complementary and partly redundant characterization methods were applied to study the transition of magnetite, graphite and MoS{sub 2} powders to mechanically alloyed nanostructures. The applied methods were: Transmission electron microscopy (TEM), Mössbauer spectroscopy (MS), Raman spectroscopy (RS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The main objective was to prepare a model material providing the essential features of a typical tribofilm forming during automotive braking, and to assess the impact of different constituents on sliding behaviour and friction level. Irrespective of the initial grain size, the raw materials were transferred to a nanocrystalline structure and mixed on a nanoscopic scale during high energy ball milling. Whereas magnetite remained almost unchanged, graphite and molybdenum disulphide were transformed to a nanocrystalline and highly disordered structure. The observed increase of the coefficient of friction was attributed to a loss of lubricity of the latter ingredient due to this transformation and subsequent oxidation. - Highlights: • Characterization of microstructural changes induced by high energy ball milling • Assessment of the potential of different characterization methods • Impact of mechanical alloying on tribological performance revealed by tests • Preparation of an artificial third body resembling the one formed during braking.

36 MATERIALS SCIENCE↗

Comparative dielectric studies of nanostructured BaTiO{sub 3}, CaCu{sub 3}Ti{sub 4}O{sub 12} and 0.5BaTiO{sub 3}⋅ 0.5CaCu{sub 3}Ti{sub 4}O{sub 12} nano-composites synthesized by modified sol–gel and solid state methods

BaTiO{sub 3} (BTO), CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) and 0.5BaTiO{sub 3}·0.5CaCu{sub 3}Ti{sub 4}O{sub 12} (BTO–CCTO), as a new nano-composite ceramic, were successfully designed and fabricated by a semi-wet gel route and a modified solid state method. The dielectric properties of the BTO–CCTO ceramic were compared to those of the BTO and CCTO ceramics at lower sintering temperatures and durations. The X-ray diffraction analysis revealed that the BTO and CCTO ceramics form a single crystalline phase and the average crystalline sizes calculated from X-ray diffraction data were in the range of 40–65 nm. The particle sizes of the BTO, CCTO, and BTO–CCTO ceramics obtained from transmission electron microscopy images were in the ranges of 40–65 nm, 80–110 nm, and 70–95 nm, respectively. The phase composition and microstructure were studied by X-ray diffraction and scanning electron microscopy. The energy dispersive X-ray results demonstrated the purity and stoichiometry of the BTO–CCTO nano-composite. The grain sizes of the BTO, CCTO and BTO–CCTO ceramics were found to be in the ranges of 500 nm–1 μm, 4–24 μm, and 250 nm–4 μm, respectively. The AC conductivity as a function of frequency confirmed the semiconducting nature of all of the ceramics and obeyed the Jonscher's power law. The impedance spectrum measurement result showed that the CCTO ceramic possessed an exceptional grain boundary resistance, which supports the internal barrier layer capacitance (IBLC) mechanism present in this ceramic and is responsible for the high ε{sub r} values. - Highlights: • Nanostructured BaTiO{sub 3}, CaCu{sub 3}Ti{sub 4}O{sub 12}, and 0.5BaTiO{sub 3}⋅ 0.5CaCu{sub 3}Ti{sub 4}O{sub 12} have been synthesized. • XRD and TEM analysis confirmed the formation of nanoparticles, 40–65 and 50–90 nm. • Impedance analysis shows high grain-boundary resistance present in CCTO ceramic. • AC conductivity as a function of frequency confirms the semiconducting nature.

36 MATERIALS SCIENCE↗

Fe-doped nanostructured titanates synthesized in a single step route

In this research nanostructured titanates, containing iron in the structure, were obtained through a single-step alkaline hydrothermal route aiming at reduction of band-gap energy. In the process, a Fe–Ti rich Brazilian mineral sand was mixed with 10 M of NaOH and then submitted to isothermal treatments at temperatures ranging from 110 to 190 °C in an autoclave. The as-obtained products were water-washed and then characterized by transmission electron and scanning transmission electron microscopies, X-ray photoelectron, Mössbauer and diffuse reflectance spectroscopies. Transmission electron microscopy analyses showed a morphological dependence of the product as a function of the temperature, i.e., titanate nanosheets were predominantly formed at lower temperatures (110 °C–150 °C), while nanoribbons, with some nanosheets and nanoparticles, were the main products at higher temperatures (> 150 °C). Using energy dispersive X-ray it was determined that iron was incorporated into nanosheets. On the other hand, the as-obtained nanoribbons were Fe-free, while iron was principally associated with nanoparticles attached to the nanoribbons. By means of X-ray photoelectron and Mössbauer spectroscopies, it was elucidated that iron adopted Fe{sup 3} {sup +} form in the as-prepared nanosheets, occupying octahedral sites inside the titanate lepidocrocite-like structure. Diffuse reflectance spectroscopy showed a change of absorption pattern from nanosheets to nanoribbon/nanoparticle assembly: nanosheets exhibited high absorption from ultraviolet up to the visible light range, while the nanoribbon/nanoparticle assembly demonstrated a drop in absorption in the visible light range. These results suggest that Fe{sup 3} {sup +} incorporation inside the titanate structure is responsible for enhancing the visible light absorption, making these nanosheets potentially suitable for applications in photoinduced processes. - Highlights: • Mineral sand has been used as the precursor for the synthesis of nanotitanates. • Fe-doped nanotitanates have been prepared in a single step wet chemistry route. • The morphology of the nanometric titanates is a function of the temperature. • Mössbauer spectroscopy reveals Fe{sup 3} {sup +} in octahedral sites inside nanosheets. • The Fe incorporation in nanosheets improved the visible light absorption.

36 MATERIALS SCIENCE↗

Characterization of Cu–Ni nanostructured alloys obtained by a chemical route. Influence of the complexing agent content in the starting solution

The influence of the amount of complexing agent added to the starting solution on the physicochemical properties of Cu–Ni nanostructured alloys obtained through a chemical route, was studied. For this purpose, three Cu–Ni nanoalloy samples were synthesized by a previously developed procedure, starting from solutions with citric acid to metal molar ratios (C/Me) of 0.73, 1.00 and 1.50. The synthesis technique consisted in preparing a precursor via the citrate-gel method, and carrying out subsequent thermal treatments in controlled atmospheres. Sample characterization was performed by scanning electron microscopy, X-ray microanalysis, X-ray diffraction, transmission electron microscopy, X-ray nanoanalysis and electron diffraction. In the three cases, copper and nickel formed a solid solution with a Cu/Ni atomic ratio close to 50/50, and free of impurities inside the crystal structure. The citric acid content of the starting solution proved to have an important influence on the morphology, size distribution, porosity, and crystallinity of the Cu–Ni alloy microparticles obtained, but a lesser influence on their chemical composition. The molar ratio C/Me = 1.00 resulted in the alloy with the Cu/Ni atomic ratio closest to 50/50. - Highlights: • We synthesize Cu–Ni nanoalloys by a chemical route based on the citrate-gel method. • We study the influence of the complexing agent content of the starting solution. • We characterize the samples by electron microscopy and X-ray techniques. • Citric acid influences the shape, size, porosity and crystallinity of the alloys.

36 MATERIALS SCIENCE↗

Annealing texture of nanostructured IF steel

In the present work, the evolution of annealing texture in nanostructured interstitial free steel fabricated via accumulative roll bonding (ARB) process was investigated. Textural evolution after post-annealing of ARB-processed samples was evaluated using X-ray diffraction. There were several texture transitions in the γ-fiber and ζ-fiber during ARB and post-annealing treatment. It was found that with increasing the number of ARB cycles, the volume fraction of the low angle grain boundary decreased and the high angle grain boundary fraction increased. Also, the shear texture was dominant after the first cycle, while for other samples, the rolling texture was dominant. The one-cycle sample clearly indicated a weak α-fiber and γ-fiber and a relatively strong ζ-fiber. In addition, during the recrystallization and before the grain growth, the intensity of α-fiber and γ-fiber decreased, the intensity of ζ-fiber increased, and the intensity of (011)〈100〉 orientation in the ε-fiber and η-fiber increased. Moreover, it was concluded that the transition from the rolling texture to the shear one was a sign of occurrence of the recrystallization (before the grain growth). Finally, with increasing the number of ARB cycles, the intensity of rolling and shear textures saturated and a stable texture formed. - Highlights: • There were texture transitions in the γ-fiber and ζ-fiber. • When the number of cycles increased, the low angle grain boundaries decreased. • The shear texture was dominant after the first cycle. • Transition from rolling texture to shear one was a sign of recrystallization. • With increasing the number of ARB cycles, a stable texture formed.

36 MATERIALS SCIENCE↗

Morphology control of ZnO nanostructures for high efficient dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) were fabricated based on different ZnO nanostructures with controllable morphologies synthesized via capping agent-assisted hydrothermal method. The capping agent hindered the growth along (001) direction, so the morphology evolved from rods to nanosheets with increasing the amounts of capping agents. The kinetics of the photoelectrochemical properties in DSSCs were also evaluated via electrochemical impedance spectroscopy with focusing on exploring the electron lifetime, electron diffusion coefficient and effective diffusion length of the cells in a quantitative manner based on an equivalent circuit model. The physical properties, such as specific surface area, photoluminescence and ultraviolet–vis diffuse reflectance spectra (DRS), were also extensively characterized in detail. DSSCs fabricated with ZnO nanosheets/rod hierarchical structures as photoanodes showed significantly improved photovoltaic performance with open-circuit voltage increasing from 0.45 V to 0.73 V, as well as the overall conversion efficiency 5.69 times better than that of ZnO rod. It was attributed to higher surface area (21.96 m{sup 2}·g{sup −1}) and more efficient light absorption, as well as more efficient electron transfer process. - Highlights: • Controlled morphologies from rods to nanosheets were manipulated by hydrothermal method. • Different ZnO morphologies based DSSCs were investigated by IV and EIS with forward biases. • DSSCs based on nano hierarchical structures yield 5.67 times higher of power conversion efficiency than that of rods.

36 MATERIALS SCIENCE↗

Revealing the nanostructure of calcium phosphate coatings using HRTEM/FIB techniques

Herein, we report on the micro- and nanostructure of the calcium phosphate coating produced by pulsed laser deposition (PLD), using focused ion beam (FIB) lamella sample preparation and transmission electron microscopy (TEM) as the characterization technique. The initial selected area electron diffraction (SAED) data demonstrated the presence of hydroxyapatite (HA) over any other possible calcium phosphate crystalline structure and the polycrystalline nature of the coating. Moreover, the SAED analyses showed clear textured ring patterns coherent with the presence of a preferred orientation in the HA nano-crystal growth. The SAED data also indicated that the coating appears to be textured in the 〈002〉 crystalline direction. Dark-field images obtained using 002 as the working reflection showed a clear oriented crystal growth in columns, from bottom to top. These columns have a peculiar arrangement of nano-crystals since, in some cases, the preferred orientation appears to start at a certain distance from the substrate. Direct d-spacing measurements on high-resolution TEM images provided further proof of the presence of an HA nano-crystal structure. The reported data may be of interest in the future to adjust the microstructure of the HA coatings. - Highlights: •The FIB lift-out technique allows a very site-specific sample preparation method for HRTEM analysis. •It also permits a fast assessment of the HA coating thickness and elemental composition (EDS). •The coatings exhibit a nano-crystalline nature, with a texturing effect along the 002 planes. •PLD is suitable for the production of crystalline c-axis oriented hydroxyapatite coatings. •The crystalline HA phase in the PLD coating is very similar to the present in bone.

36 MATERIALS SCIENCE↗

Infusion of hydrogen into nanostructured bainitic steel

Highlights: • Results show that austenite is more effective in trapping hydrogen than α/γ interfaces. • The H desorption behaviour was accurately reproduced with local equilibrium model. • The trapping capacity of retained austenite originates from the austenite lattice sites. - Abstract: The trapping of hydrogen in nanostructured bainitic steel has been investigated using thermal desorption analysis, in order to determine the potency of the ferrite-retained austenite (α/γ) interfaces and retained austenite as trapping sites. Thermal desorption data showed that the volume of retained austenite is more effective in trapping hydrogen than the interfaces. There is a close correlation between the quantity of hydrogen and the retained austenite content rather than the density of interfaces. A local equilibrium model was able to reproduce the hydrogen desorption behaviour of saturated and unsaturated samples considering both retained austenite and α/γ interfaces as the trapping sites. A trap binding energy ranging from 47 to 52 kJ/mol was estimated for retained austenite, suggesting that the observed trapping capacity originates from the austenite lattice sites.

36 MATERIALS SCIENCE↗

Growth of faceted SiC nanostructures using vapor phase condensation: Microstructural analysis

Highlights: • Synthesis of nanocrystalline SiC using thermal plasma route. • XRD data indicates presence of both α- and β-SiC polytypes with β-SiC as the major content. • HRTEM and SAED analysis reveals polytypic arrangement with stacking faults SiC nanoparticles. • TEM micrograph reveals presence of faceted structures such as hexagonal, triangular, triangular pyramidal structure. - Abstract: The paper emphasizes the morphological and microstructural analysis of SiC nanostructures grown by thermal plasma assisted gas phase condensation process. High Resolution Transmission Electron Microscopic and Selected Area Electron Diffraction studies are used to analyze the growth directions and the polytypic arrangement with stacking faults in the as synthesized SiC nanoparticles. The results help in understanding the hierarchical poly-types related to the observed geometries and showed the presence of both α- and β-SiC polytypes. The microstructural study is supported by X-Ray diffraction and UV–Visible absorption spectroscopic studies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controllable synthesis of hierarchical nanostructures of CaWO{sub 4} and SrWO{sub 4} via a facile low-temperature route

CaWO{sub 4} and SrWO{sub 4} nanostructures have been synthesized via a simple microemulsion-mediated route. With careful control of the fundamental experimental parameters including the concentration of reactants, the reaction time and the temperature, the products with different morphologies of dumbbell, coral, rod and dendrite have been obtained, respectively. The possible formation mechanism of these unique morphologies has been proposed based on surfactant self-assembly under different experimental conditions. The as-synthesized CaWO{sub 4} samples with various morphologies exhibit different photoluminescence properties. X-ray powder diffraction, transmission electron microscopy, field-emission scanning electron microscopy, and luminescence spectroscopy were used to characterize these products.

36 MATERIALS SCIENCE↗

Synthesis of ribbon type carbon nanostructure using LiFePO{sub 4} catalyst and their electrochemical performance

Ribbon type of carbon nanostructure has been synthesized by chemical vapor deposition using a new catalyst (LiFePO{sub 4}) introduced for the first time and its electrochemical behavior has been determined from charge/discharge characteristics. The synthesized material characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and by Raman spectroscopy confirms the graphitic structure and ribbon type morphology of material. The performance of the single cell using purified carbon nanoribbon as the anode has been studied and the reversible lithium intercalation capacity has been found about 345 mAh/g, of which 335 mAh/g remain after 14th cycle. The columbic efficiency has been stabilized at approximately 98% from the 5th cycle.

36 MATERIALS SCIENCE↗

Morphology-controlled synthesis of ZnS nanostructures via single-source approaches

ZnS nanoparticles of various morphologies, including hollow or solid spherical, and polyhedral shape, were synthesized from single-source precursor Zn(S{sub 2}COC{sub 2}H{sub 5}){sub 2} without using a surfactant or template. The as-prepared samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy. The results indicate that ZnS hollow and solid spheres assembled by nanoparticles can be easily generated by the solution phase thermalysis of Zn(S{sub 2}COC{sub 2}H{sub 5}){sub 2} at 80 {sup o}C using N, N-dimethylformamide (DMF) and ethylene glycol (EG) or water as solvents, respectively, whereas solvothermal process of the same precursor led to ZnS nanoparticles of polyhedral shape with an average size of 120 nm. The optical properties of these ZnS nanostructures were investigated by room-temperature luminescence and UV-vis diffuse reflectance spectra.

36 MATERIALS SCIENCE↗

Characterization of nanostructured photosensitive (NiS){sub x}(CdS){sub (1-x)} composite thin films grown by successive ionic layer adsorption and reaction (SILAR) route

Highlights: {yields} Thin films of (NiS){sub x}(CdS){sub (1-x)} with variable composition (x = 1 to 0) were deposited onto glass substrates by the successive ionic layer adsorption and reaction (SILAR) method. {yields} The structural, surface morphological and electrical characterizations of the as deposited and annealed films were studied. {yields} The bandgap and activation energy of annealed (NiS){sub x}(CdS){sub (1-x)} film decrease with improvement in photosensitive nature. -- Abstract: Recently ternary semiconductor nanostructured composite materials have attracted the interest of researchers because of their photovoltaic applications. Thin films of (NiS){sub x}(CdS){sub (1-x)} with variable composition (x = 1-0) had been deposited onto glass substrates by the successive ionic layer adsorption and reaction (SILAR) method. As grown and annealed films were characterised by X-ray diffraction, scanning electron microscopy and EDAX to investigate structural and morphological properties. The (NiS){sub x}(CdS){sub (1-x)} films were polycrystalline in nature having mixed phase of rhombohedral and hexagonal crystal structure due to NiS and CdS respectively. The optical and electrical properties of (NiS){sub x}(CdS){sub (1-x)} thin films were studied to determine compsition dependent bandgap, activation energy and photconductivity. The bandgap and activation energy of annealed (NiS){sub x}(CdS){sub (1-x)} film decrease with improvement in photosensitive nature.

36 MATERIALS SCIENCE↗

NiO-silica based nanostructured materials obtained by microemulsion assisted sol-gel procedure

Graphical abstract: TEM micrograph of NiO/SiO{sub 2} nanoparticles. Highlights: {yields} Microemulsion assisted sol-gel procedure for NiO silica nanomaterials synthesis. {yields} Controlling the size and shape of nanoparticles and avoiding their aggregation. {yields} Narrow band-gap semiconductors (energies <3 eV) absorbing VIS or near-UV light biologically and chemically inert semiconductors entrapping/coating in silica network. {yields} Low cost as the microemulsion is firstly used in water metallic cation extraction. -- Abstract: NiO-silica based materials have been synthesized by microemulsion assisted sol-gel procedure. The versatility of these soft nanotechnology techniques has been exploited in order to obtain different types of nanostructures, such as NiO nanoparticles, NiO silica coated nanoparticles and NiO embedded in silica matrix. These materials have been characterized by adequate structural and morphology techniques: DLS, HR-TEM/SAED, BET, AFM. Optical and semiconducting properties (band-gap values) of the synthesized materials have been quantified by means of VIS-NIR diffuse reflectance spectra, thus demonstrating their applicative potential in various electron transfer phenomena such as photocatalysis, electrochromic thin films, solid oxide fuel cells.

36 MATERIALS SCIENCE↗

Ammonium mediated hydrothermal synthesis of nanostructured hematite (α-Fe{sub 2}O{sub 3}) particles

Highlights: ► Hydrothermal synthesis of nanostructured hematite (α-Fe{sub 2}O{sub 3}) particles. ► NH{sub 4}OH mediated direct transformation of micro-rod hematite to ellipsoidal particles. ► Ellipsoids formed by controlled aggregation, rather than directional growth. -- Abstract: Uniform α-Fe{sub 2}O{sub 3} particles of different shapes have been synthesized through hydrothermal process. The additives, the type of Fe(III) salts and reaction conditions in hydrothermal process were thoroughly investigated. The crystalline structure and morphology of the as-synthesized powder have been characterized by using X-ray powder diffraction, scanning electron microscopy and field emission scanning electron microscopy. Rod and ellipsoidal-shaped α-Fe{sub 2}O{sub 3} were obtained with ferric chloride as a precursor, while only irregular-shaped particles were synthesized by using ferric nitrate as precursors in the absence of NH{sub 4}OH. Direct transformation of micro-rod hematite to ellipsoidal particles with FeCl{sub 3} as precursor was also observed by adding NH{sub 4}OH. It is shown that the nanorod was formed through presumed directional aggregation of rapidly formed nucleus, while the formation of ellipsoidal hematite particles may undergo a nucleation–aggregation–dissolution–recrystallization process in the presence of ammonium.

36 MATERIALS SCIENCE↗