Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Methane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Selective C-H Functionalization of Methane and Ethane by a Molecular Sb V Complex

Owing to the strong nonpolar bonds involved, selective C-H functionalization of methane and ethane to esters remains a challenge for molecular homogeneous chemistry. Here, we report that the computationally predicted main-group p-block Sb V (TFA) 5 complex selectively functionalizes the C-H bonds of methane and ethane to the corresponding mono and/or diol trifluoroacetate esters at 110-180 °C with yields for ethane of up to 60 % with over 90 % selectivity. Additionally, experimental and computational studies support a unique mechanism that involves Sb V -mediated C-H activation followed by functionalization of a Sb V -alkyl intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methane Catalytic Combustion over Hierarchical Pd@CeO 2 /Si‐Al 2 O 3 : Effect of the Presence of Water

Abstract The influence of water vapor on methane catalytic combustion was studied over a Pd@CeO 2 /Si‐Al 2 O 3 catalyst, carefully designed to maximize Pd‐CeO 2 interaction and prevent metal sintering and compared to a conventional impregnated catalyst with identical chemical composition. Although the nanostructured Pd@CeO 2 /Si‐Al 2 O 3 catalyst is thermally stable, the addition of water to the reaction feed leads to a transient deactivation at low temperatures, consistent with the well documented competitive adsorption. In addition to this, the hierarchically structured catalyst exhibits an additional severe deactivation after methane oxidation in the presence of water vapor at 600 °C that can be reversed only by heating the catalyst above 700 °C. The presence of water in the reaction feed deactivates the conventional impregnated catalyst less severely and the activity largely returns upon water removal. Catalytic FTIR and CO‐chemisorption data indicate that this severe deactivation process in the hierarchical catalyst is due to the formation of stable OH groups on the surface of the ceria nanoparticles. These hydroxyl groups are suggested to significantly inhibit the oxygen spillover from the CeO 2 nanoparticles to Pd, preventing its efficient re‐oxidation, as observed by operando X‐ray absorption near edge spectroscopy (XANES) experiments. At the same time, their presence can contribute to limit the gas phase accessibility of Pd, as indicated by the decrease of CO chemisorption capability. The presence of hydroxyls plays a minor role on the deactivation of the conventional catalyst at 600 °C.

Monai, Matteo↗

Toward Rational Design of Nickel Catalysts for Thermocatalytic Decomposition of Methane for Carbon Dioxide-Free Hydrogen and Value-Added Carbon Co-Product: A Review

Thermocatalytic decomposition of methane provides opportunities for hydrogen (H2) production with no emission of carbon dioxide. However, high-value carbon products need to be produced for economic deployment of thermocatalytic decomposition and to achieve a minimum H 2 selling price below the U.S, Department of Energy target of $ 1/kg H 2 . In this review, we re-evaluate data on catalyst development reported in the literature and propose correlations between catalyst characteristics, catalytic stability, and properties of carbon co-products. In the first part of the review, growth mechanisms for carbon nanotubes using state-of-the-art chemical vapor deposition are reviewed to catalog the effects of catalyst characteristics, the influence of carbon sources, interactions between metal particles and supports, and metal particle sizes on carbon growth. In the second part, representative developments in mono-, bi-, and tri-metallic nickel catalysts are highlighted. We present kinetic analysis of reactions catalyzed by mono-metallic nickel catalysts, which generates a correlation between metal particle size and catalyst stability. Rational design of Ni-based catalysts for TCD of methane requires attention to the size of the metal particle and effective normalization of the reaction rates. Further attention to the distribution of the metal particle sizes may help identify catalyst properties that contribute longevity and selectivity to processes that use them. While it is tempting to focus on the highest valued carbon products (e.g., CNTs and CFs), analysis of the markets for other carbon products suggests that a more flexible approach may generate comparable returns without the risk associated with specialization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structurally Regenerable High Entropy Aluminate Spinel Catalysts for Dry Reforming of Methane

The dry reforming of methane reaction is a promising means to convert two potent greenhouse gases, methane and carbon dioxide, into industrially valuable synthesis gas. However, the presence of reducing gases and high operating temperatures degrade conventional nickel catalysts via excessive coke formation and particle sintering. These catalysts are not readily regenerated because the oxidative heat treatments employed to remove coke further promote active particle sintering. In this work, we designed high entropy aluminate spinel oxides (MAl 2 O 4 where M = Co, Mg, Ni, and divalent site vacancies in nominal equimolar concentration) as selective and regenerable reforming catalysts. Under reaction conditions, reducible nickel and cobalt cations exsolved from the spinel lattice to form highly selective bimetallic particles on the oxide surface. Instead of sintering, these particles uniquely redissolved back into the aluminate lattice upon reoxidation and regained the original spinel structure. This phenomenon is ascribed to entropic stabilization, wherein an increase in configurational entropy creates a thermodynamic driving force for redispersing supported metal particles back into the multi‐cationic oxide structure. During the dry reforming reaction, nickel atoms similarly exsolved from a NiAl 2 O 4 sample and reduced to form metallic nickel particles. However, subsequent oxidation of this sample promoted sintering and oxidation of the nickel particles to an inactive state. High entropy materials thus provide a unique mechanism of regeneration, which is inaccessible in conventional catalysts.

coke deposition↗

Trends in Unconventional Well Development—Methane Emissions Associated with the Use of Dual Fuel and Dedicated Natural Gas Engines

Abstract The process of unconventional natural gas recovery is becoming increasingly popular as the world’s demand for alternative fuels continues to grow. Natural gas has the potential to be a widely used fuel in the near future due to its availability and potential to displace petroleum‐based liquid fuels. As energy companies extract natural gas, current fuels, such as diesel, are consumed in mass quantities for drilling and hydraulic fracturing operations. To save on costs, and in an attempt to reduce emissions, many companies are investing in dual fuel and dedicated natural gas engines to power these operations. This trend results in new sources of methane emissions, which can contribute significantly to global warming. We are aware of the potential impact of these emissions and are conducting research funded by the Department of Energy to assess methane emissions from dual fuel and dedicated natural gas technologies, as industry moves towards more extensive use of natural gas as a fuel for onsite power production.

Johnson, Derek↗

Bromine and iodine for selective partial oxidation of propane and methane

The oxidative dehydrogenation of propane to propylene can be enhanced through the addition of a halogen to a feed of oxygen and propane. Here, we examine halogen-assisted oxidative dehydrogenation by a mixture of I 2 and Br 2 . We find that adding a small amount of Br 2 to a feed of I 2 , C 3 H 8 , and O 2 produces propylene with 71% propane conversion and 83% propylene selectivity. Good performance is also obtained if a small amount of I 2 is added to a feed of Br 2 , C 3 H 8 , and O 2 . In both cases, the propylene yield is greater than the sum of the yields obtained with iodine and bromine separately. A variety of studies were performed to help understand the reaction mechanism. Methane halogenation was also investigated by using combinations of iodine and bromine to produce methyl iodide, and a microkinetic model was also constructed for methane halogenation in the gas-phase to help understand the mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alkaline zirconates as effective materials for hydrogen production through consecutive carbon dioxide capture and conversion in methane dry reforming

In this work, H 2 production was evaluated using different carbonation conditions and two alkaline zirconates. For this purpose, Li 2 ZrO 3 and Na 2 ZrO 3 were synthesized, characterized and tested on a consecutive process composed of initial CO 2 capture, followed by methane dry reforming (MDR). Thermogravimetric results showed that under the four gas mixtures tested (diluted and saturated CO 2 , CO and CO-O 2 ), both ceramics are able to chemisorb CO 2 , with Na2ZrO3 having the highest capture with saturated CO 2 . In catalytic tests, ceramics carbonated with saturated CO 2 or CO-O 2 gas flows were able to act as sorbents and catalysts, producing H 2 at T > 750 °C through the partial oxidation of methane. This reaction was produced because CO2 desorption did not occur, thus avoiding the MDR process. On the other hand, carbonated ceramics under a CO-O2 gas mixture presented an outstanding catalytic performance. Between 450 and 750 °C, H 2 was formed through the MDR process promoted by CO 2 desorption from both ceramics. This result is in line with CO 2 desorption results, where a weaker CO 2 –solid interaction was observed in comparison with saturated CO 2 2. Afterward, both ceramics presented a similar catalytic behavior, good regeneration and cyclability after the double process proposed (CO 2 capture-MDR reaction). Lithium zirconate also presented high thermal stability during cycle tests; meanwhile, sodium zirconate showed an important H 2 production increase as a function of cycles. Finally, both materials are feasible options for producing a clean energy source in a moderate temperature range through the catalytic conversion of two greenhouse gases (CO 2 and CH 4 ).

03 NATURAL GAS↗

Fluidized-bed and fixed-bed reactor testing of methane chemical looping combustion with MgO-promoted hematite

In this article MgO-promoted Fe 2 O 3 hematite oxygen carriers were synthesized from various Mg sources and evaluated for methane chemical looping combustion. Particles suitable for fluidized bed flow reactor studies were prepared in the lab. Cyclic CLC tests conducted in the fluidized bed with MgO promoted hematite showed better performance than that with hematite. Attrition resistance of laboratory prepared MgO promoted hematite was excellent. Reactivity and stability of the oxygen carrier materials were also tested in the thermogravimetric analyzer and bench-scale reactors. Scanning electron microscopy and energy-dispersive X-ray spectroscopy, and X-ray diffraction were used to study the morphology and elemental compositions present in the hematite and promoted hematite oxygen carriers prior to and following the multi-cycle chemical looping reaction. The incorporation of 5 wt% MgO led to an increased reaction rate and an increase in oxygen utilized as compared to the pure hematite oxygen carrier. Possible reasons for the promotion effect by MgO were evaluated. These studies reveal that the best performing oxygen carrier was the 5 wt% MgO/Fe 2 O 3 which exhibited no observed degradation in the kinetics and conversion performance in the methane step over 15 reduction and oxidation cycles. The Mg promoted oxygen carrier also showed reduced coke formation as compared to the pure hematite carrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid carbon production and recovery from high temperature methane pyrolysis in bubble columns containing molten metals and molten salts

We study methane pyrolysis in a bubble column reactor consisting of a layer of molten NiBi alloy, and a molten salt layer floating on the metal layer. The molten metal is a pyrolysis catalyst; the molten salt layer is added for removing contaminants from the carbon product. Methane is introduced at the bottom of the reactor and the rising bubbles contain reactant and product gases together with metal vapor and flakes of solid carbon. When the bubbles rise through the molten salt layer the metal vapor condenses producing dense liquid metal droplets, which sink to the metal phase; the low-density carbon rises to the top of the salt layer. The carbon generated from the single-phase molten NiBi reactor has a different structure from that produced in the two-phase NiBi/salt reactor. The amount of metal in the carbon product is less than 5 wt %, in the two-phase reactor, compared to 83 wt % in the NiBi single-phase reactor. After subsequent purification steps one obtains solid carbon with less than 2 wt % salt contamination and no detectable metal contamination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aging studies of Dual functional materials for CO 2 direct air capture with in situ methanation under simulated ambient conditions: Ru thrifting for cost reduction

Dual function materials (DFMs) comprised of 0.25 %Ru, 6.1 %Na 2 O/γ-Al 2 O 3 //monolith were evaluated for about 250 hours time-on-stream (TOS) at various simulated ambient climate capture conditions followed by temperature swing methanation to 280 °C. Herein this paper focuses on the impact of thrifting Ru to low levels and the impact on performance. Results showed both stable CO 2 capture capacity and CH 4 production with 0.25 % Ru DFM deposited on a ceramic monolith. The CO 2 conversion to CH 4 production was decreased slightly by the Ru decrease from 1 % to 0.25 %. The capture capacity decreased since a lower Ru content reduces the complete decomposition of the Na 2 CO 3 precursor producing fewer active adsorption sites (“Na 2 O”). The deployment of a low Ru DFM monolith would significantly decrease the overall capital cost and give more potential for a large-scale direct air capture and methanation (DACM) application.

03 NATURAL GAS↗

Response of flame thickness and propagation speed under intense turbulence in spatially developing lean premixed methane–air jet flames

Direct numerical simulations of three-dimensional spatially-developing turbulent Bunsen flames were performed at three different turbulence intensities. We performed these simulations using a reduced methane–air chemical mechanism which was specifically tailored for the lean premixed conditions simulated here. A planar-jet turbulent Bunsen flame configuration was used in which turbulent preheated methane–air mixture at 0.7 equivalence ratio issued through a central jet and was surrounded by a hot laminar coflow of burned products. The turbulence characteristics at the jet inflow were selected such that combustion occured in the thin reaction zones (TRZ) regime. At the lowest turbulence intensity, the conditions fall on the boundary between the TRZ regime and the corrugated flamelet regime, and progressively moved further into the TRZ regime by increasing the turbulent intensity. The data from the three simulations was analyzed to understand the effect of turbulent stirring on the flame structure and thickness. Furthermore, statistical analysis of the data showed that the thermal preheat layer of the flame was thickened due to the action of turbulence, but the reaction zone was not significantly affected. A global and local analysis of the burning velocity of the flame was performed to compare the different flames. Detailed statistical averages of the flame speed were also obtained to study the spatial dependence of displacement speed and its correlation to strain rate and curvature.

36 MATERIALS SCIENCE↗

Reply to “Methane origin in the Samail ophiolite: Comment on ‘Modern water/rock reactions in Oman hyperalkaline peridotite aquifers and implications for microbial habitability’” [Geochim. Cosmochim. Acta 179 (2016) 217–241]

We thank Dr. Giuseppe Etiope for his comment and the opportunity to further discuss why we consider the origin of the methane detected in subsurface fluids obtained from a peridotite aquifer in Oman to be enigmatic. The central focus of Miller et al. (2016) was the characterization of the fluids and dissolved gases recovered from 300 meter wells drilled into peridotite at two locations near Ibra. Microscale geochemical analyses of rock chips recovered during drilling gave further insight into the aqueous geochemistry measurements. These samples allowed us to analyze the extent of modern peridotite hydration and secondary mineralization in light of potential hydrogen-generating reactions. Additionally, biomass was recovered from the fluids, and 16S rRNA showed the presence of methanogens and methanotrophs. These methane-cycling microbes may be modulating the isotopic signature of CH 4 found in the wells; thus, we do not feel comfortable rejecting the hypothesis that microbial activity contributes to the unusual isotopic signature of CH 4 in the wells without further investigation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 1: Path-integral calculations with CCSD(T) quality potentials

Isotopic compositions of alkanes are typically assumed to be kinetically controlled, but recently is has been proposed that alkanes can isotopically equilibrate for both C and H isotopes during natural gas generation. Evaluation of this requires knowledge of the isotopic equilibrium between alkanes and other common hydrogen and carbon bearing species. Here, in this study, we calculate isotopic equilibria within and between gaseous dihydrogen (H 2 ), water (H 2 O), methane (CH 4 ), ethane (C 2 H 6 ) and propane (C 3 H 8 ), including isotope fractionation among molecules, clumped isotope effects, as well as among sites of propane (i.e., the site-specific isotope effects) from 0°C to 500°C using a path-integral method paired with high-level descriptions of molecular potentials and the diagonal correction to the Born Oppenheimer approximation. While path-integral calculations with high- level CCSD(T) potentials are available for the isotopic equilibria involving methane, the path-integral calculations for ethane and propane have only been performed based on lower-level descriptions of the molecular potentials. We analyze the relative importance of various approximations that are commonly employed when isotopic equilibria are evaluated. We find that clumped isotope effects can be calculated to the same accuracy using computationally inexpensive combination of the Bigeleisen-Mayer-Urey model with the molecular potential from density functional theory. In contrast, fractionation and site preferences of both deuterium and carbon-13 benefit from the use of the higher level CCSD(T) potentials and accounting for anharmonic effects. Additionally, for fractionation and site preference of deuterium corrections to Born-Oppenheimer approximation can also be important.

03 NATURAL GAS↗

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 2: Experimental determination of hydrogen isotopic equilibrium for ethane-H2 from 30 to 200 °C and propane-H2 from 75 to 200 °C

The stable isotopic compositions of light n-alkanes, including methane, ethane, and propane, are often used to identify the sources and thermal maturity of natural gas samples. Though stable isotopic compositions of these molecules are commonly assumed to be controlled by kinetic isotope effects, recent studies have proposed both carbon and hydrogen isotopic equilibrium may also occur in some samples. Assessing whether samples are in isotopic equilibrium requires knowledge of light alkane equilibrium fractionation factors over geologically relevant temperatures for formation and storage (up to ∼300 °C). In this study, we report experimental results of hydrogen isotopic equilibrium between ethane and H2 from 30 to 200 °C and propane and H2 from 75 to 200 °C. We compare these results with high-level theoretical calculations and provide a preferred polynomial fit to describe equilibrium fractionation factors. Comparison of these fractionation factors with a compilation of ∼500 compiled environmental gas samples supports the proposal that many (∼50%) of these natural gas samples exhibit hydrogen isotopic compositions consistent with having formed in or attained methane-ethane-propane hydrogen isotopic equilibrium over geologically relevant temperatures for formation and storage (50–300 °C).

Turner, Andrew C↗

Scalable simulation of coupled adsorption and transport of methane in confined complex porous media with density preconditioning

The growing significance of shales and tight formations in the transition to less carbon-intensive and clean energy drives the research endeavor to understand the physics of gas flow within these systems. However, shales are composed of massively heterogeneous physical and chemical features. Most nano-sized pores connect to millimeter-scale fractures, leading to multiscale transport. These nano-scale pore throats demonstrate non-classical flow behavior, such as non-negligible slip velocities and adsorbed gas layers at the boundary. As a result, classical computational fluid dynamics models do not capture the physics. In this work, we develop a coupling scheme for the multiple-relaxation-time (MRT) lattice Boltzmann (LB) method that integrates the Peng-Robinson equation of state into a pseudo-potential interaction model to capture the physics of methane flow in irregular networks of channels that represent nano-scale porous media. We use atomistic simulations to calibrate and validate our model in slit nano-channels. We propose a preconditioning scheme to initialize the coupled transport and adsorption simulation of methane in complex porous media. The results of this implementation of LB agree with Direct Simulation Monte Carlo (DSMC) and Molecular Dynamics (MD) simulations. We then scale up the LB implementation through vectorization and indirect addressing. We parallelize it using Message Passing Interface (MPI) and OpenMP frameworks to simulate transport and adsorption in complex media with a million lattices. Additionally, we analyze the differences between coupled and transport-only simulations in two case studies and show that considering phase behavior, i.e., adsorption, can significantly change the flow behavior. This work constitutes an important step towards bridging the gap between molecular flow and system-scale behavior of complex disordered porous media.

42 ENGINEERING↗

Fully coupled two-phase flow and poromechanics modeling of coalbed methane recovery: Impact of geomechanics on production rate

This study presents the development and application of a fully coupled two-phase (methane and water) flow, transport, and poromechanics num erical model for the analysis of geomechanical impacts on coalbed methane (CBM) production. The model considers changes in two-phase fluid flow properties, i.e., coal porosity, permeability, water retention, and relative permeability curves through changes in cleat fractures induced by effective stress variations and desorption-induced shrinkage. The coupled simulator is first verified for poromechanics coupling, and simulation parameters of a CBM reservoir model are calibrated by history matching against one year of CBM production field data from Shanxi Province, China. Then, the verified simulator and the calibrated CBM reservoir model are used for predicting the impact of geomechanics on the production rate for twenty years of continuous CBM production. The simulation results show that desorption-induced shrinkage is the dominant process in increasing permeability in the near wellbore region. Away from the wellbore, desorption-induced shrinkage is weaker, and permeability is reduced by pressure depletion and increased effective stress. A sensitivity analysis shows that for coal with a higher sorption strain, a larger initial Young's modulus and a smaller Poisson's ratio promote the enhancement of permeability as well as an increased production rate. Moreover, the conceptual model of the cleat system, whether dominated by vertical cleats with permeability correlated to horizontal stress or with permeability correlated to mean stress, can have a significant impact on the predicted production rate. Overall, the study clearly demonstrates and confirms the critical importance of considering geomechanics for an accurate prediction of CBM production.

03 NATURAL GAS↗

High resolution numerical simulations of methane pool fires using adaptive mesh refinement

The ability to accurately predict the structure and dynamics of pool fires using computational simulations is of great interest in a wide variety of applications, including accidental and wildland fires. However, the presence of physical processes spanning a broad range of spatial and temporal scales poses a significant challenge for simulations of such fires, particularly at conditions near the transition between laminar and turbulent flow. Here, in this study, we examine the transition to turbulence in methane pool fires using high-resolution simulations with multi-step finite rate chemistry, where adaptive mesh refinement (AMR) is used to directly resolve small-scale flow phenomena. We perform three simulations of methane pool fires, each with increasing diameter, corresponding to increasing inlet Reynolds and Richardson numbers. As the diameter increases, the flow transitions from organized vortex roll-up via the puffing instability to much more chaotic mixing associated with finger formation along the shear layer and core collapse near the inlet. These effects combine to create additional mixing close to the inlet, thereby enhancing fuel consumption and causing more rapid acceleration of the fluid above the pool. We also make comparisons between the transition to turbulence and core collapse in the present pool fires and in inert helium plumes, which are often used as surrogates for the study of buoyant reacting flows.

42 ENGINEERING↗

Local Thermochemical Mechanisms in Direct Solar Graphite Synthesis from Methane

Methane pyrolysis is known to produce hydrogen and solid carbon in a variety of thermal processes. However, the generated carbon product typically belongs to a low-value amorphous type. Here, we elucidate the thermochemical mechanisms of a reaction that produces high-quality graphite via direct solar methane pyrolysis on a porous substrate. By comparing graphite deposition rates and local reaction zone temperatures of exposed and shadowed regions from the same experiment, we clarify the effects of thermolysis and photolysis in this emission-free process that both decarbonizes a fuel and produces a critical material for the sustainable energy transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗