Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPLE PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Geodetic measurements and numerical models of transient deformation at Raft River geothermal field, Idaho, USA

Here, we perform synthetic aperture radar interferometry using data acquired between 2004 and 2016 by the Envisat, and ALOS-2 satellite missions to measure transient deformation at the Raft River geothermal field in Cassia County in Southern Idaho where geothermal production began in late 2007. Time-series analysis of multiple interferometric pairs indicates uplift at an exponentially decaying rate, over an ~8 km-by-5 km area centered near three injection wells that recycle produced brine. Similarly, subsidence at an exponentially decaying rate is observed in a 4 km-by-4 km area west of the production wells. These two signatures stay in the same location in all of the well-correlated Envisat interferometric pairs spanning the time interval between 2007 and 2010. The boundary separating the uplifting and subsiding areas is associated with the steeply dipping Bridge fault zone. Using two-dimensional numerical models, we explore first-order, bi-directional coupling between hydrological and mechanical processes. Our results suggest that: (i) most of the deformation occurs due to pore pressure changes following the start of geothermal production, (ii) the rate of deformation decays to zero over a time scale on the order of ~5 years as the system reaches steady state, and (iii) a reservoir-scale permeability of the order of ~1E–14 m 2 is required to explain the transient deformation.

15 GEOTHERMAL ENERGY↗

Agrivoltaics provide mutual benefits across the food–energy–water nexus in drylands

The vulnerabilities of our food, energy and water systems to projected climatic change make building resilience in renewable energy and food production a fundamental challenge. We investigate a novel approach to solve this problem by creating a hybrid of colocated agriculture and solar photovoltaic (PV) infrastructure. We take an integrative approach - monitoring microclimatic conditions, PV panel temperature, soil moisture and irrigation water use, plant ecophysiological function and plant biomass production within this 'agrivoltaics' ecosystem and in traditional PV installations and agricultural settings to quantify trade-offs. We find that shading by the PV panels provides multiple additive and synergistic benefits, including reduced plant drought stress, greater food production and reduced PV panel heat stress. The results presented here provide a foundation and motivation for future explorations towards the resilience of food and energy systems under the future projected increased environmental stress involving heat and drought.

14 SOLAR ENERGY↗

Designing Iowa Agricultural Landscapes to Improve Environmental Co-Benefits of Bioenergy Production

Cellulosic bioenergy feedstocks are needed to improve carbon (C) management while provisioning biomass for bioproducts and biofuel. The transition to increased cellulosic biomass production can be guided by land management plans designed to improve economic, environmental, and ecological performance. We constructed a sustainability model to compare landscape designs for biofuel production from corn (Zea mays L.) stover and switchgrass (Panicum virgatum L.) in central Iowa, USA. We used the model to compare environmental and socioeconomic outcomes associated with four landscape management strategies, with and without cellulosic biomass markets. We evaluated (1) a fuelshed area containing over 1.2 million ha (3 million acres) of corn and soybean (Glycine max (L.) Merr.) within 80 km (50 miles) of a commercial-scale cellulosic biorefinery in Nevada, Iowa, and (2) the South Fork watershed containing over 72,000 ha (178,000 acres) of these row crops within eight north central Iowa HUC-12 (hydrologic unit code) watersheds. At both landscape scales, we found that it is possible to achieve multiple environmental and socioeconomic benefits concomitantly with cellulosic biomass production by strategically collecting corn stover and converting the 10% of the lowest-profitability row crop land to perennial switchgrass. Potential benefits from landscape design include increased biodiversity, soil and water quality improvements, increased soil carbon sequestration for climate change mitigation, and reduced fertilizer use and cost. Our model results showed that increasing benefits can accrue when complementary conservation practices (e.g., reduced tillage, use of a rye cover crop) are combined and integrated throughout a fuelshed or watershed area. We conclude that ecologically based landscape designs offer valuable insights about costs and benefits of land management alternatives, with relevance for achieving stakeholder goals.

54 ENVIRONMENTAL SCIENCES↗

Kinetic Analysis of Competitive Electrocatalytic Pathways: New Insights into Hydrogen Production with Nickel Electrocatalysts

The hydrogen production electrocatalyst Ni(PPh2NPh2)22+ (1) is capable of traversing multiple electrocatalytic pathways. When using dimethylformamidium, DMF(H)+, the mechanism of formation of H2 catalyzed by 1 changes from an ECEC to an EECC mechanism as the potential approaches the Ni(I/0) couple. Two recent electrochemical methods, current-potential analysis and foot-of-the-wave analysis (FOWA), were performed on 1 to measure the detailed chemical kinetics of the competing ECEC and EECC pathways. A sensitivity analysis was performed on the electrochemical methods using digital simulations to gain a better understanding of their strengths and limitations. Notably, chemical rate constants were significantly underestimated when not accounting for electron transfer kinetics, even when electron transfer was fast enough to afford a reversible non-catalytic wave. The EECC pathway of 1 was found to be faster than the ECEC pathway under all conditions studied. Using buffered DMF: DMF(H)+ mixtures led to an increase in the catalytic rate constant (kobs) of the EECC pathway, but kobs for the ECEC pathway did not change when using buffered acid. Further kinetic analysis of the ECEC path revealed that added base increases the rate of isomerization of the exo-protonated Ni(0) isomers to the catalytically active endo-isomers, but decreases the net rate of protonation of Ni(I). FOWA on 1 did not provide accurate rate constants due to incomplete reduction of the exo-protonated Ni(I) intermediate at the foot of the wave, but FOWA could be used to estimate the reduction potential of this previously undetected intermediate. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences. Pacific Northwest National Laboratory is operated by Battelle for the U.S. Department of Energy.

electrocatalysis↗

Liquid Oxygen Propellant Densification Production and Performance Test Results With a Large-Scale Flight-Weight Propellant Tank for the X33 RLV

This paper describes in-detail a test program that was initiated at the Glenn Research Center (GRC) involving the cryogenic densification of liquid oxygen (LO2). A large scale LO2 propellant densification system rated for 200 gpm and sized for the X-33 LO2 propellant tank, was designed, fabricated and tested at the GRC. Multiple objectives of the test program included validation of LO2 production unit hardware and characterization of densifier performance at design and transient conditions. First, performance data is presented for an initial series of LO2 densifier screening and check-out tests using densified liquid nitrogen. The second series of tests show performance data collected during LO2 densifier test operations with liquid oxygen as the densified product fluid. An overview of LO2 X-33 tanking operations and load tests with the 20,000 gallon Structural Test Article (STA) are described. Tank loading testing and the thermal stratification that occurs inside of a flight-weight launch vehicle propellant tank were investigated. These operations involved a closed-loop recirculation process of LO2 flow through the densifier and then back into the STA. Finally, in excess of 200,000 gallons of densified LO2 at 120 oR was produced with the propellant densification unit during the demonstration program, an achievement that s never been done before in the realm of large-scale cryogenic tests.

Tomsik, Thomas M.↗

A Multi-Instrument Cloud Condensation Nuclei Spectrum Product (Final Technical Report)

A wealth of observational data exists on the characteristics of atmospheric particulate matter, over multiple years, at the DOE ARM Southern Great Plains (SGP) Central Facility site. This site is located in a region of the country that frequently experiences weather extremes, and that is removed from many local sources of pollution but is affected by transported smoke, dust, and urban emissions. The relationships between particulate matter, cloud formation and evolution, and precipitation are therefore of strong interest, and are being explored via modeling on a variety of scales. These models require as input detailed information on the characteristics of particles capable of serving as the nuclei for cloud formation. Sufficient data exist to be able to put together a picture of the nature of the total aerosol and the cloud condensation nuclei (CCN) subset, and their variability, through merged data products. This study was aimed at exploiting the multiple measurement types at SGP to develop the first such multi-year estimates. Further, the resulting data were analyzed to understand temporal patterns ranging from hourly to seasonal, thereby gaining insights into the particle sources affecting the atmosphere in this region. DOE-funded datasets that were analyzed in this study include total particle number concentrations, submicron aerosol scattering coefficients, dry aerosol size distributions, and more recently, time-resolved submicron aerosol chemical composition. Data are also available for the number concentrations of particles that are activated in a cloud condensation nucleus instrument at a series of setpoint supersaturations, providing direct observations of the number concentrations of “CCN”. This variable is the quantity that is generally desired for inclusion in numerical models that seek to represent and predict the impacts of varying aerosol characteristics on the formation and microphysical properties of clouds. One limitation of the use of direct CCN observations is that they are not available for supersaturations larger than about 1%, which is insufficient for deep convection and may be insufficient even for shallow convection, depending on the nature of the available CCN and the dynamics of the cloud. We developed a data-based approach to representing the full aerosol size spectrum with size-dependent hygroscopicity, and used this to extrapolate CCN spectra beyond the limited measurements. Five years of SGP aerosol data (2009 -2013) were analyzed. As a side product of our work, we identified and communicated several previously-unflagged data quality issues. The resulting merged aerosol distributions, along with fits for seasonal averages, were published and submitted to the ARM archive as a special value-added product (VAP; submitted as a PI product). CCN spectra were computed for the same data period and will similarly be published and submitted to the archive for use by the community. We also note that our methodologies and findings have been discussed at several Joint ARM User Facility/Atmospheric System Research (ASR) Principal Investigators Meetings and that recent ARM/ASR aerosol data reporting strategies have included similar ideas for data merging, indicating that this work has had a lasting impact on ARM aerosol data acquisition and reporting. The proposed work advances the science of the interactions of aerosols, clouds and precipitation, with direct application to improve representation of such interactions for clouds in regional and global climate models. The archived data will continue to serve research studies in the future.

54 ENVIRONMENTAL SCIENCES↗

Differences in Ice Cloud Optical Depth From CALIPSO and Ground-Based Raman Lidar at the ARM SGP and TWP Sites

Ice cloud column optical depths from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite and ground-based Raman lidars (RLs) at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) and Tropical Western Pacific (TWP) sites are compared for 8 and 4 years, respectively. The cloudy mean ice cloud column optical depths from CALIPSO Version 4 data product with a horizontal resolution of 5 km are 78% (63%) larger than those from the RLs with a resolution of 10 min/30 m at SGP (TWP) for collocated transparent profiles. The main difference at SGP is caused by the lidar ratio that for CALIPSO is related to its treatment of the multiple scattering factor. The main difference at TWP is caused by the averaging resolution. Large differences in the optical depth distribution between the CALIPSO and RL are found for small optical depths at both sites, which are due to optically very thin clouds only detectable by the RLs. The differences in ice cloud column optical depth distributions and their mean values between the CALIPSO and RL can largely be reconciled over both sites after accounting for the averaging resolutions, lidar ratios along with the CALIPSO multiple scattering factor treatment, sensitivity to optically very thin ice clouds, and definition of transparent profiles. This work also examines in detail the lidar ratios that are directly observed by the RLs, which does not support the temperature-dependent parameterizations of ice cloud lidar ratio and multiple scattering factor used in CALIPSO's Version 4 data product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transverse momentum fluctuations and their correlation with elliptic flow in nuclear collision

In this article, we propose observables v 0 and v 0 (p T ) which quantify the relative fluctuations in the total transverse momentum at fixed multiplicity. We first study the factorization of the fixed multiplicity momentum dependent two particle correlation function into a product of v 0 ($p^{a}_{T}$) and v 0 ($p^{b}_{T}$) within realistic hydrodynamic simulations. Then we present computations of v 0 (p T ) for different particle types. We determine the relation between the integrated v 0 and previously measured observables, and compare results from a hybrid hydrodynamics based model to experimental data. The effects of bulk viscosity and an initial pre-equilibrium stage on the results are quantified. We find that v 0 is strongly correlated with the initial state entropy per elliptic area, S/A. Using this result, we explain how the observed correlations between the elliptic flow and the transverse momentum (both in simulations and experiment) reflect the initial state correlations between 1/A and ellipticity ε 2 at fixed multiplicity. Furthermore, we argue that the systematic experimental study of v 0 , with the same sophistication as used for the other v n , can contribute significantly to our understanding of quark gluon plasma properties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

StoreRush: An Application-Level Approach to Harvesting Idle Storage in a Best Effort Environment

For a production HPC system where storage devices are shared between multiple applications and managed in a best effort manner, contention is often a major problem leading to some storage devices being more loaded than others and causing a significant reduction in I/O throughput. In this paper, we describe our latest efforts StoreRush to resolve this practical issue at the application level without requiring modification to the file and storage system. The proposed scheme uses a two-level messaging system to harvest idle storage via re-routing I/O requests to a less congested storage location so that write performance is improved while limiting the impact on read by throttling re-routing if deemed too much. An analytical model is derived to guide the setup of optimal throttling factor. The proposed scheme is verified against production applications Pixie3D, XGC1 and QMCPack during production windows, which very well demonstrated the effectiveness (e.g., up to 1.8x improvement in write) and scalability of our approach (up to 131,072 cores).

97 MATHEMATICS AND COMPUTING↗

Total Measurement Uncertainty in Neutron Coincidence Multiplicity Analysis

Neutron multiplicity counting is the most commonly used nondestructive assay technique for determining the plutonium mass within containers of scrap PuO 2 or mixed oxide (MOX). In multiplicity analysis, the 240 Pu eff mass, leakage multiplication, and alpha ratio (the ratio of [α, n]-to-spontaneous fission neutron production) are the three primary unknown sample properties. They must be determined simultaneously. To solve for these three unknowns in a multiplicity assay, three measured values are needed: the singles, doubles, and triples neutron count rates. While the analysis is limited to solving for three unknowns, there are many additional factors that impact the observed count rates and contribute to the measurement uncertainty. In this study we investigate the various uncertainty contributors for the multiplicity analysis through a combination of traditional uncertainty propagation techniques supplemented by Monte Carlo simulations to address the dependences not explicitly expressed by the point source model. Uncertainties arising from counting statistics, calibration parameters, calibration method, nuclear data, and various material characteristics (isotopic abundances, chemical form, density, and impurities) are considered. A Total Measurement Uncertainty (TMU) estimate is then developed from these uncertainty contributors. This study is confined to multiplicity analysis of items commonly encountered in international safeguards applications. That is, the study focused on Pu oxides and MOX materials for the masses ranging up to 4000 grams total Pu. Multiplicity measurements were simulated using MCNP V6 based on the Plutonium Scrap Multiplicity Counter (PSMC), Epithermal Multiplicity Counter (ENMC), Pyrochemical Multiplicity Counter, and Large Epithermal Multiplicity Counter (LEMC) for this study; however, this report focuses on the parameterization of the uncertainties for the PSMC. The performance differences between the PSMC and the other multiplicity counting systems are relatively small, primarily manifesting in the impact on measurement precision so that the evaluation developed for the PSMC can be applied to the other multiplicity counting systems. Finally an analysis tool, the Multiplicity TMU Estimator, was developed from this study to serve as an aid for evaluation of the total measurement uncertainty of multiplicity assay results obtained from the commonly used INCC acquisition and analysis software.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Iceland as a Model for Chemical Alteration on Mars

Subglacial volcanic activity on Iceland has led to the formation of a variety of silicate and iron oxide-rich alteration products that may serve as a model for chemical alteration on Mars. Multiple palagonitic tuffs, altered pillow lavas, hydrothermal springs and alteration at glacial run-off streams were observed during a recent field trip in Iceland. Formation of alteration products and ferrihydrite in similar environments on Mars may have contributed to the ferric oxide-rich surface material there. The spectral and chemical properties of Icelandic alteration products and ferrihydrites are presented here.

Bishop, Janice L.↗

VIIRS Deep Blue Aerosol Products Over Land: Extending the EOS Long‐Term Aerosol Data Records

A primary goal of the Deep Blue (DB) project is to create consistent long‐term aerosol data records, suitable for climate studies, using multiple satellite instruments. In order to continue Earth Observing System (EOS)‐era aerosol products into the Joint Polar Satellite System era, we have successfully ported the DB algorithm to process data from the Visible Infrared Imaging Radiometer Suite (VIIRS). Although the basic structure of the VIIRS algorithm is similar to that for the Moderate Resolution Imaging Spectroradiometer (MODIS), many enhancements have been made compared to the MODIS collection 6 (C6) version. Most have also been implemented in the latest MODIS Collection 6.1 (C6.1). For example, a new smoke mask was developed based on the spectral curvature of measured reflectance to distinguish biomass burning smoke from weakly absorbing urban/industrial aerosols. Consequently, a new aerosol‐type flag was added into the VIIRS DB data set. In addition, new dust models have been developed to account for the nonsphericity of mineral dust. As a result, a discontinuity in the retrieved aerosol optical depth (AOD) of Saharan dust plumes seen in MODIS C6 products near the boundary between North Africa and the Atlantic has been much reduced. We have also evaluated the VIIRS and MODIS Terra/Aqua C6.1 AOD against Aerosol Robotic Network data. VIIRS and MODIS retrievals show similar performance; around 80% of matchups agree with Aerosol Robotic Network within the expected error of ±(0.05 + 20)%, indicating that DB can provide consistent AOD through the historical EOS and present Joint Polar Satellite System eras.

aerosols↗

New risk metrics and mathematical tools for risk analysis: Current and future challenges

The current status of the food safety supply world wide, has led Food and Agriculture Organization (FAO) and World Health Organization (WHO) to establishing Risk Analysis as the single framework for building food safety control programs. A series of guidelines and reports that detail out the various steps in Risk Analysis, namely Risk Management, Risk Assessment and Risk Communication is available. The Risk Analysis approach enables integration between operational food management systems, such as Hazard Analysis Critical Control Points, public health and governmental decisions. To do that, a series of new Risk Metrics has been established as follows: i) the Appropriate Level of Protection (ALOP), which indicates the maximum numbers of illnesses in a population per annum, defined by quantitative risk assessments, and used to establish; ii) Food Safety Objective (FSO), which sets the maximum frequency and/or concentration of a hazard in a food at the time of consumption that provides or contributes to the ALOP. Given that ALOP is rather a metric of the public health tolerable burden (it addresses the total ‘failure’ that may be handled at a national level), it is difficult to be interpreted into control measures applied at the manufacturing level. Thus, a series of specific objectives and criteria for performance of individual processes and products have been established, all of them assisting in the achievement of FSO and hence, ALOP. In order to achieve FSO, tools quantifying the effect of processes and intrinsic properties of foods on survival and growth of pathogens are essential. In this context, predictive microbiology and risk assessment have offered an important assistance to Food Safety Management. Predictive modelling is the basis of exposure assessment and the development of stochastic and kinetic models, which are also available in the form of Web-based applications, e.g., COMBASE and Microbial Responses Viewer), or introduced into user-friendly softwares, (e.g., Seafood Spoilage Predictor) have evolved the use of information systems in the food safety management. Such tools are updateable with new food-pathogen specific models containing cardinal parameters and multiple dependent variables, including plate counts, concentration of metabolic products, or even expression levels of certain genes. Then, these tools may further serve as decision-support tools which may assist in product logistics, based on their scientifically-based and “momentary” expressed spoilage and safety level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design requirements for SRB production control system. Volume 2: System requirements and conceptual description

In the development of the business system for the SRB automated production control system, special attention had to be paid to the unique environment posed by the space shuttle. The issues posed by this environment, and the means by which they were addressed, are reviewed. The change in management philosphy which will be required as NASA switches from one-of-a-kind launches to multiple launches is discussed. The implications of the assembly process on the business system are described. These issues include multiple missions, multiple locations and facilities, maintenance and refurbishment, multiple sources, and multiple contractors. The implications of these aspects on the automated production control system are reviewed including an assessment of the six major subsystems, as well as four other subsystem. Some general system requirements which flow through the entire business system are described.

Source record↗

The Impact of Decarbonization on Particulate Soiling of Solar Panels

Climate researchers have examined many impacts of climate change on energy supply and demand under various scenarios. However, the effect of changing particulate deposition onto solar panel surfaces on solar power production efficiency (i.e., soiling) has not been studied. We therefore characterize probabilistic outcomes across multiple climate models and scenarios. We find large current regional losses (up to 40% without manual cleaning, up to 20% with monthly cleaning and rain removal) in generation that grow slightly under a high-emission scenario, largely due to regional increases in windblown dust. In contrast, under a low-emissions scenario, potential production increases significantly (2–8% interquartile range with only rain removal) due to reduced soiling, especially in regions of Asia and Africa where anthropogenic aerosols are major contributors to soiling. Projected changes vary widely across models in many dusty areas outside of the Sahara and Arabia. Differences can also be large in regions dominated by anthropogenic aerosols, such as Nigeria, eastern China, and northern India, where the full range across modeled potential power production changes extends from −1 to +11% for the end of the century (without manual cleaning), underscoring the need to consider multiple climate models. With large increases in projected solar power deployment, the relatively small potential production increases reported here could nevertheless represent a large dividend in additional energy production. Hence, reductions in air pollution attributable to decarbonization could provide positive feedback under which a greater deployment of solar power (or other renewables) increases the production of solar power, facilitating the transition to renewable energy.

renewable energy↗

The role of bioenergy in a climate-changing world

Bioenergy has been under intense scrutiny over the last ten years with significant research efforts in many countries taking place to define and measure sustainable practices. We describe here the main challenges and policy issues and provide policy recommendations for scaling up sustainable bioenergy approaches globally. The 2016 Intended Nationally Determined Contributions (INDCs defined under the UN Framework Convention on Climate Change) (UNFCCC) Conference of the Parties (COP21) will not reach global Greenhouse Gas (GHG) emission targets of 2 °C. Sustainable biomass production can make a significant contribution. Substantive evidence exists that many bioenergy cropping systems can bring multiple benefits and off-set environmental problems associated with fossil fuels usage as well as intensive food production and urbanization. We provide evidence that there are many approaches to land use for bioenergy expansion that do not lead to competition for food or other needs. We should focus on how to manage these approaches on a synergistic basis and how to reduce tradeoffs at landscape scales. Priorities include successful synergies between bioenergy and food security (integrated resource management designed to improve both food security and access to bioenergy), investments in technology, rural extension, and innovations that build capacity and infrastructure, promotion of stable prices to incentivize local production and use of double cropping and flex crops (plants grown for both food and non-food markets) that provide food and energy as well as other services. The sustainable production of biomass requires appropriate policies to secure long-term support to improve crop productivity and also to ensure environmental as well as economic and social benefits of bioenergy cropping systems. Continuous support for cropping, infrastructure, agricultural management and related policies is needed to foster positive synergies between food crops and bioenergy production. In comparison to fossil fuels, biofuels have many positive environmental benefits. Potential negative effects caused by land-use change and agriculture intensification can be mitigated by agroecological zoning, best management practices, the use of eco-hydrology and biodiversity-friendly concepts at field, watershed and landscape scales. Global climate and environmental changes related to the use of fossil fuels and inequitable development make it unethical not to pursue more equitable energy development that includes bioenergy. Here, to achieve sustainable development, competitiveness and costs of bioenergy production need to be addressed in a manner that considers not only economic gains but also development of local knowledge and social and environmental benefits.

09 BIOMASS FUELS↗

TAMU: Blueprint for A New Space Mission Operations System Paradigm

The Transferable, Adaptable, Modular and Upgradeable (TAMU) Flight Production Process (FPP) is a System of System (SOS) framework which cuts across multiple organizations and their associated facilities, that are, in the most general case, in geographically disperse locations, to develop the architecture and associated workflow processes of products for a broad range of flight projects. Further, TAMU FPP provides for the automatic execution and re-planning of the workflow processes as they become operational. This paper provides the blueprint for the TAMU FPP paradigm. This blueprint presents a complete, coherent technique, process and tool set that results in an infrastructure that can be used for full lifecycle design and decision making during the flight production process. Based on the many years of experience with the Space Shuttle Program (SSP) and the International Space Station (ISS), the currently cancelled Constellation Program which aimed on returning humans to the moon as a starting point, has been building a modern model-based Systems Engineering infrastructure to Re-engineer the FPP. This infrastructure uses a structured modeling and architecture development approach to optimize the system design thereby reducing the sustaining costs and increasing system efficiency, reliability, robustness and maintainability metrics. With the advent of the new vision for human space exploration, it is now necessary to further generalize this framework to take into consideration a broad range of missions and the participation of multiple organizations outside of the MOD; hence the Transferable, Adaptable, Modular and Upgradeable (TAMU) concept.

Ruszkowski, James T.↗