Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MODEL SIMULATION DATA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Recent Advances on INSAR Temporal Decorrelation: Theory and Observations Using UAVSAR

We review our recent advances in understanding the role of temporal decorrelation in SAR interferometry and polarimetric SAR interferometry. We developed a physical model of temporal decorrelation based on Gaussian-statistic motion that varies along the vertical direction in forest canopies. Temporal decorrelation depends on structural parameters such as forest height, is sensitive to polarization and affects coherence amplitude and phase. A model of temporal-volume decorrelation valid for arbitrary spatial baseline is discussed. We tested the inversion of this model to estimate forest height from model simulations supported by JPL/UAVSAR data and lidar LVIS data. We found a general good agreement between forest height estimated from radar data and forest height estimated from lidar data.

polarimetric SAR interferometry↗

Demonstration of Broadband Contrast at 1.2 Lambda/D for the EXCEDE Phase-Induced Amplitude Apodization Coronagraph

The proposed coronagraph instrument on the EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) mission study uses a Phase-Induced Amplitude Apodization (PIAA) coronagraph architecture to enable high-contrast imaging of circumstellar debris disks and giant planets at angular separations as close in as the habitable zone of nearby host stars. We report on the experimental results obtained in the vacuum chamber at the Lockheed Martin Advanced Technology Center in 10 percent broadband light centered about 650 nanometers, with a median contrast of 1 x 10 (sup -5) between 1.2 and 2.0 lambda /D simultaneously with 3 x 10 (sup -7) contrast between 2 and 11 =D between 2 and 11 lambda/D for a single-sided dark hole using a deformable mirror (DM) upstream of the PIAA coronagraph. The results are stable and repeatable as demonstrated by three measurements runs with DM settings set from scratch and maintained on the best 90 percent out of the 1000 collected frames. We compare the reduced experimental data with simulation results from modeling observed experimental limits; performance is consistent with uncorrected low-order modes not estimated by the Low Order Wavefront Sensor (LOWFS). Modeled sensitivity to bandwidth and residual tip/tilt modes is well-matched to the experiment.

Wavefront control↗

Rotary Balance Wind Tunnel Testing for the FASER Flight Research Aircraft

Flight dynamics research was conducted to collect and analyze rotary balance wind tunnel test data in order to improve the aerodynamic simulation and modeling of a low-cost small unmanned aircraft called FASER (Free-flying Aircraft for Sub-scale Experimental Research). The impetus for using FASER was to provide risk and cost reduction for flight testing of more expensive aircraft and assist in the improvement of wind tunnel and flight test techniques, and control laws. The FASER research aircraft has the benefit of allowing wind tunnel and flight tests to be conducted on the same model, improving correlation between wind tunnel, flight, and simulation data. Prior wind tunnel tests include a static force and moment test, including power effects, and a roll and yaw damping forced oscillation test. Rotary balance testing allows for the calculation of aircraft rotary derivatives and the prediction of steady-state spins. The rotary balance wind tunnel test was conducted in the NASA Langley Research Center (LaRC) 20-Foot Vertical Spin Tunnel (VST). Rotary balance testing includes runs for a set of given angular rotation rates at a range of angles of attack and sideslip angles in order to fully characterize the aircraft rotary dynamics. Tests were performed at angles of attack from 0 to 50 degrees, sideslip angles of -5 to 10 degrees, and non-dimensional spin rates from -0.5 to 0.5. The effects of pro-spin elevator and rudder deflection and pro- and anti-spin elevator, rudder, and aileron deflection were examined. The data are presented to illustrate the functional dependence of the forces and moments on angle of attack, sideslip angle, and angular rate for the rotary contributions to the forces and moments. Further investigation is necessary to fully characterize the control effectors. The data were also used with a steady state spin prediction tool that did not predict an equilibrium spin mode.

Denham, Casey↗

Aerosol-Radiation-Cloud Interactions in the South-East Atlantic: Model-Relevant Observations and the Beneficiary Modeling Efforts in the Realm of the EVS-2 Project ORACLES

Globally, aerosols remain a major contributor to uncertainties in assessments of anthropogenically-induced changes to the Earth climate system, despite concerted efforts using satellite and suborbital observations and increasingly sophisticated models. The quantification of direct and indirect aerosol radiative effects, as well as cloud adjustments thereto, even at regional scales, continues to elude our capabilities. Some of our limitations are due to insufficient sampling and accuracy of the relevant observables, under an appropriate range of conditions to provide useful constraints for modeling efforts at various climate scales. In this talk, I will describe (1) the efforts of our group at NASA Ames to develop new airborne instrumentation to address some of the data insufficiencies mentioned above; (2) the efforts by the EVS-2 ORACLES project to address aerosol-cloud-climate interactions in the SE Atlantic and (3) time permitting, recent results from a synergistic use of A-Train aerosol data to test climate model simulations of present-day direct radiative effects in some of the AEROCOM phase II global climate models.

Redemann, Jens↗

Systems Development, Data Mining, and Knowledge Discovery

The primary role of the Technical Integration Office is to provide technical solutions and services to different branches at KSC (Kennedy Space Center) and NASA program customers. The Technical Integration Office helps support KSC's operational needs by providing services such as digital connectivity, data center services, modelling and simulation tools, and communication video services. To learn the necessary technology and processes for my internship, I am working on two projects: learning C# (C Sharp programming language) with SQL and developing requirements for a PX (Communication and Public Engagement) inventory management system. To learn how to efficiently program with C#, my mentor assigned me to complete a sports informatics application that would let users discover facts and rules about various sports. The sports informatics application comes with search capabilities, report generating features, rule lists that users can modify, and diagrams for various sport strategies. To further build upon this project, I also developed a sport simulation game with the application. Once I begin more SQL-based projects, I will have the opportunity to learn how to manage databases and link SQL servers with C# programs. To develop requirements for the inventory management system, I have met with PX representatives and toured their storage facilities to see how they organize and store their items and equipment. I will also be meeting with representatives from the budget office to find out what information must be in a system budget report. The main components the system must have are customer request management, a search feature for items and equipment, report generation capabilities, and automated system warnings when item quantities reach or go below administrator-specified threshold levels. I have drafted questions and shall statements that will ultimately become part of the inventory management system requirements document.

Espinosa, Gabriel↗

The Twisted Configuration of the Martian Magnetotail: MAVEN Observations

Measurements provided by the Mars Atmosphere and Volatile EvolutioN (MAVEN) spacecraft are analyzed to investigate the Martian magnetotail configuration as a function of interplanetary magnetic field (IMF) BY. We find that the magnetotail lobes exhibit a ~45deg twist, either clockwise or counterclockwise from the ecliptic plane, up to a few Mars radii downstream. Moreover, the associated cross-tail current sheet is rotated away from the expected location for a Venus-like induced magnetotail based on nominal IMF draping. Data-model comparisons using magnetohydrodynamic simulations are in good agreement with the observed tail twist. Model field line tracings indicate that a majority of the twisted tail lobes are composed of open field lines, surrounded by draped IMF. We infer that dayside magnetic reconnection between the crustal fields and draped IMF creates these open fields and may be responsible for the twisted tail configuration, similar to what is observed at Earth.

Martian↗

Thermal crosstalk measurements and simulations for an X-ray microcalorimeter array

Arrays of high-density microcalorimeters require careful heat sinking in order to minimize the thermal crosstalk between nearby pixels. For the array of microcalorimeters developed for the Athena X-ray Integral Field Unit instrument, which has more than 3000 pixels on a 275 µm pitch, it is essential to address this problem in order to meet the energy-resolution requirements. The instrument’s energy-resolution budget requires that the impact of the thermal crosstalk on the energy resolution be a contribution that, added in quadrature to other energy-resolution contributions, is less than 0.2 eV. This value results in a derived requirement that the ratio between the amplitude of the crosstalk signal to an X-ray pulse (for example at 6 keV) is less than 1 × 10(exp −3) (for the first neighbor), less than 4 × 10(exp −4) (for the diagonal neighbor) and less than 8 × 10(exp −5) (for the second nearest neighbor). We have measured the thermal crosstalk levels between pixels in various geometries and configurations. The results show a crosstalk ratio which is at least a factor of 4 lower than the derived requirement. We also developed a finite element (FEM) 2D thermal model to predict the thermal behavior of large-scale arrays. This model successfully simulates the measured data in terms of pulse amplitude and time constants.

Antoine R. Miniussi↗

The Twisted Configuration of the Martian Magnetotail: MAVEN Observations

Measurements provided by the Mars Atmosphere and Volatile EvolutioN (MAVEN) spacecraft are analyzed to investigate the Martian magnetotail configuration as a function of interplanetary magnetic field (IMF) BY. We find that the magnetotail lobes exhibit a ~45° twist, either clockwise or counterclockwise from the ecliptic plane, up to a few Mars radii downstream. Moreover, the associated cross‐tail current sheet is rotated away from the expected location for a Venus‐like induced magnetotail based on nominal IMF draping. Data‐model comparisons using magnetohydrodynamic simulations are in good agreement with the observed tail twist. Model field line tracings indicate that a majority of the twisted tail lobes are composed of open field lines, surrounded by draped IMF. We infer that dayside magnetic reconnection between the crustal fields and draped IMF creates these open fields and may be responsible for the twisted tail configuration, similar to what is observed at Earth.

Gina A. DiBraccio↗

Assessment of Natural and Anthropogenic Aerosol Air Pollution In the Middle East Using MERRA-2, CAMS Data Assimilation Products, and High-Resolution WRF-Chem Model Simulations

Modern-Era Retrospective analysis for Research and Applications v.2 (MERRA-2), Copernicus Atmosphere Monitoring Service Operational Analysis (CAMS-OA), and a high-resolution regional Weather Research and Forecasting model coupled with chemistry (WRF-Chem) were used to evaluate natural and anthropogenic particulate matter (PM) air pollution in the Middle East (ME) during 2015–2016. Two Moderate Resolution Imaging Spectrometer (MODIS) retrievals – combined product Deep Blue and Deep Target (MODIS-DB&DT) and Multi-Angle Implementation of Atmospheric Correction (MAIAC) – and Aerosol Robotic Network (AERONET) aerosol optical depth (AOD) observations as well as in situ PM measurements for 2016 were used for validation of the WRF-Chem output and both assimilation products. MERRA-2 and CAMS-OA assimilate AOD observations. WRF-Chem is a free-running model, but dust emission in WRF-Chem is tuned to fit AOD and aerosol volume size distributions obtained from AERONET. MERRA-2 was used to construct WRF-Chem initial and boundary conditions both for meteorology and chemical and aerosol species. SO2 emissions in WRF-Chem are based on the novel OMI-HTAP SO2 emission dataset. The correlation with the AERONET AOD is highest for MERRA-2 (0.72–0.91), MAIAC (0.63–0.96), and CAMSOA (0.65–0.87), followed by MODIS-DB&DT (0.56–0.84) and WRF-Chem (0.43–0.85). However, CAMS-OA has a relatively high positive mean bias with respect to AERONET AOD. The spatial distributions of seasonally averaged AODs from WRF-Chem, assimilation products, and MAIAC are well correlated with MODIS-DB&DT AOD product. MAIAC has the highest correlation (R = 0.8), followed by MERRA-2 (R = 0.66), CAMS-OA (R = 0.65), and WRF-Chem (R = 0.61). WRF-Chem, MERRA-2, and MAIAC underestimate and CAMS-OA overestimates MODIS-DB&DT AOD. The simulated and observed PM concentrations might differ by a factor of 2 because it is more challenging for the model and the assimilation products to reproduce PM concentration measured within the city. Although aerosol fields in WRF-Chem and assimilation products are entirely consistent, WRF-Chem is preferable for analysis of regional air quality over the ME due to its higher spatial resolution and better SO2 emissions. The WRF-Chem’s PM background concentrations exceed the World Health Organization (WHO) guidelines over the entire ME. Mineral dust is the major contributor to PM (≈ 75%–95%) compared to other aerosol types. Near and downwind from the SO2 emission sources, non-dust aerosols (primarily sulfate) contribute up to 30% to PM(sub 2.5). The contribution of sea salt to PM in coastal regions can reach 5%. The contributions of organic matter, black carbon and organic carbon to PM over the Middle East are insignificant. In the major cities over the Arabian Peninsula, the 90th percentile of PM(sub 10) and PM(sub 2.5) (particles with diameters less than 10 and 2.5 μm, respectively) daily mean surface concentrations exceed the corresponding Kingdom of Saudi Arabia air quality limits. The contribution of the non-dust component to PM(sub 2.5) is < 25%, which limits the emission control effect on air quality. The mitigation of the dust effect on air quality requires the development of environment-based approaches like growing tree belts around the cities and enhancing in-city vegetation cover. The WRF-Chem configuration presented in this study could be a prototype of a future air quality forecast system that warns the population against air pollution hazards.

Alexander Ukhov↗

Explainable deep learning for insights in El Niño and river flows

The El Niño Southern Oscillation (ENSO) is a semi-periodic fluctuation in sea surface temperature (SST) over the tropical central and eastern Pacific Ocean that influences interannual variability in regional hydrology across the world through long-range dependence or teleconnections. Recent research has demonstrated the value of Deep Learning (DL) methods for improving ENSO prediction as well as Complex Networks (CN) for understanding teleconnections. However, gaps in predictive understanding of ENSO-driven river flows include the black box nature of DL, the use of simple ENSO indices to describe a complex phenomenon and translating DL-based ENSO predictions to river flow predictions. Here we show that eXplainable DL (XDL) methods, based on saliency maps, can extract interpretable predictive information contained in global SST and discover SST information regions and dependence structures relevant for river flows which, in tandem with climate network constructions, enable improved predictive understanding. Our results reveal additional information content in global SST beyond ENSO indices, develop understanding of how SSTs influence river flows, and generate improved river flow prediction, including uncertainty estimation. Observations, reanalysis data, and earth system model simulations are used to demonstrate the value of the XDL-CN based methods for future interannual and decadal scale climate projections.

SST↗

Computational Tools to Assess Turbine Biological Performance

Public Utility District No. 2 of Grant County (GCPUD) operates the Priest Rapids Dam (PRD), a hydroelectric facility on the Columbia River in Washington State. The dam contains 10 Kaplan-type turbine units that are now more than 50 years old. Plans are underway to refit these aging turbines with new runners. The Columbia River at PRD is a migratory pathway for several species of juvenile and adult salmonids, so passage of fish through the dam is a major consideration when upgrading the turbines. In this paper, a method for turbine biological performance assessment (BioPA) is demonstrated. Using this method, a suite of biological performance indicators is computed based on simulated data from a CFD model of a proposed turbine design. Each performance indicator is a measure of the probability of exposure to a certain dose of an injury mechanism. Using known relationships between the dose of an injury mechanism and frequency of injury (dose–response) from laboratory or field studies, the likelihood of fish injury for a turbine design can be computed from the performance indicator. By comparing the values of the indicators from proposed designs, the engineer can identify the more-promising alternatives. We present an application of the BioPA method for baseline risk assessment calculations for the existing Kaplan turbines at PRD that will be used as the minimum biological performance that a proposed new design must achieve.

hydropower, turbine, fish, CFD, Columbia River, pr↗

Xafs Studies of Transition Metal And Halogen Biomaterials in Invertebrate Tools

A significant fraction of arthropods, as well as some worms and members of other phyla, contain extraordinary amounts of transition metals (Mn, Fe, Cu, Zn) and halogens (Cl, Br, I) in their hardened tools (jaws, claws, fangs, stings, etc.). Bulk Zn EXAFS differs for different kinds of tools, whereas Br appears to occupy a common environment in different tools. Zn binding to histidine is observed for most samples but bulk Zn EXAFS is likely to sample a mixture of Zn coordination environments. Principal Component Analysis (PCA) suggests the presence of three main Zn coordination components. The similar Br EXAFS in widely different tools indicates that Br-phenyl is the dominant form, suggesting the presence of brominated aromatic amino acid-derived organic components in these biomaterials. Calculated Debye-Waller factors are used to simulate EXAFS when model compound data are unavailable.

59 BASIC BIOLOGICAL SCIENCES↗

Gulf of Mexico Turbulence Intensity Model Data in Observational Space

The dataset archives model-simulated turbulence intensity and meteorological profiles and timeseries at the Shell Exploration and Production Corporation's Tension Leg Platforms Ursa and Mars. The simulated data are interpolated in time and/or space according to observed quantities. The simulations were carried out for the Gulf of Mexico region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the Shell Exploration and Production Corporation's Tension Leg Platforms Ursa and Mars are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing.

17 WIND ENERGY↗

Scenario Analysis of Peak Demand Savings for Commercial Buildings with Thermal Mass in California

This paper reports on the potential impact of demand response (DR) strategies in commercial buildings in California based on the Demand Response Quick Assessment Tool (DRQAT), which uses EnergyPlus simulation prototypes for office and retail buildings. The study describes the potential impact of building size, thermal mass, climate, and DR strategies on demand savings in commercial buildings. Sensitivity analyses are performed to evaluate how these factors influence the demand shift and shed during the peak period. The whole-building peak demand of a commercial building with high thermal mass in a hot climate zone can be reduced by 30percent using an optimized demand response strategy. Results are summarized for various simulation scenarios designed to help owners and managers understand the potential savings for demand response deployment. Simulated demand savings under various scenarios were compared to field-measured data in numerous climate zones, allowing calibration of the prototype models. The simulation results are compared to the peak demand data from the Commercial End-Use Survey for commercial buildings in California. On the economic side, a set of electricity rates are used to evaluate the impact of the DR strategies on economic savings for different thermal mass and climate conditions. Our comparison of recent simulation to field test results provides an understanding of the DR potential in commercial buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Research highlights of the global modeling and simulation branch for 1986-1987

This document provides a summary of the research conducted in the Global Modeling and Simulation Branch and highlights the most significant accomplishments in 1986 to 1987. The Branch has been the focal point for global weather and climate prediction research in the Laboratory for Atmospheres through the retrieval and use of satellite data, the development of global models and data assimilation techniques, the simulation of future observing systems, and the performance of atmospheric diagnostic studies.

Baker, Wayman↗