Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Improvement of electrical and optical properties of molybdenum oxide thin films by ultralow pressure sputtering method

In this work, we investigated the structural, electrical and optical properties of molybdenum oxide thin films deposited by the reactive dc magnetron sputtering method. The molybdenum oxide films were prepared at sputtering pressures ranging from 6.7 x 10{sup -1} to 6.7 x 10{sup -2} Pa. In order to promote their electrical conductivity, all the deposited MoO{sub x} films were annealed in Ar ambient at 450 deg. C for 8 h. The resistivity of the MoO{sub x} films varied from 10{sup -4} to 10{sup -2}{Omega} cm depending on the O{sub 2} content in the sputtering ambient. The lowering of the resistivity of the MoO{sub 2} films was mainly attributed to the formation of a monoclinic MoO{sub 2} polycrystalline phase. As the sputtering pressure decreased, the content of monoclinic polycrystalline MoO{sub 2} phase increased, resulting in low resistivity films. The formation of the dominant MoO{sub 2} phase at lower sputtering pressures was attributed to the stress induced crystallization. The post-deposition annealed (PDA) MoO{sub x} film, deposited at an ultralow sputtering pressure (6.7 x 10{sup -2} Pa) and O{sub 2} content of 40%, had an atomic ratio of O to Mo {approx_equal} 2.85 and was highly transparent and conductive: the transmittance in the visible wavelength range of 400-500 nm was about 73% and the resistivity was 1.05 x 10{sup -3}{Omega} cm. This result is superior to those of MoO{sub x} films epitaxially grown by the pulse laser deposition method.

36 MATERIALS SCIENCE↗

Influence of process parameters on properties of reactively sputtered tungsten nitride thin films

Tungsten nitride (WN{sub x}) thin films were produced by reactive dc magnetron sputtering of tungsten in an Ar-N{sub 2} gas mixture. The influence of the deposition power on the properties of tungsten nitride has been analyzed and compared with that induced by nitrogen content variation in the sputtering gas. A combined analysis of structural, electrical and optical properties on thin WN{sub x} films obtained at different deposition conditions has been performed. It was found that at an N{sub 2} content of 14% a single phase structure of W{sub 2}N films was formed with the highest crystalline content. This sputtering gas composition was subsequently used for fabricating films at different deposition powers. Optical analysis showed that increasing the deposition power created tungsten nitride films with a more metallic character, which is confirmed with resistivity measurements. At low sputtering powers the resulting films were crystalline whereas, with an increase of power, an amorphous phase was also present. The incorporation of an excess of nitrogen atoms resulted in an expansion of the W{sub 2}N lattice and this effect was more pronounced at low deposition powers. Infrared analysis revealed that in WN{sub x} films deposited at low power, chemisorbed N{sub 2} molecules did not behave as ligands whereas at high deposition power they clearly appeared as ligands around metallic tungsten. In this study, the influence of the most meaningful deposition parameters on the phase transformation reaction path was established and deposition conditions suitable for producing thermally stable and highly crystalline W{sub 2}N films were found.

36 MATERIALS SCIENCE↗

Electrochemical properties of sputter-deposited MoO{sub 3} films in lithium microbatteries

Molybdenum oxide (MoO{sub 3}) films were prepared by magnetron sputtering using an Mo target. The films were sputtered in the reactive atmosphere of an argon-oxygen gas mixture under various substrate temperatures, T{sub s}, and oxygen partial pressures, p(O{sub 2}). The effects of the growth conditions on the microstructure were examined using reflection high-energy electron diffraction and x-ray photoelectron spectroscopy. The analyses indicate that stoichiometric and polycrystalline MoO{sub 3} films were obtained at T{sub s} = 445 Degree-Sign C and p(O{sub 2}) = 61%. The applicability of the sputtered MoO{sub 3} films for lithium microbattery application has been demonstrated. The discharge-charge profiles, the kinetics of lithium intercalation process in the film, and the cycling behavior have been investigated in detail to understand the effect of microstructure on the electrochemical performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of target-substrate distance on properties of flexible InZnSnO films grown by linear facing target sputtering

The authors have investigated the effect of target-to-substrate distance (TSD) on the electrical, optical, and structural properties of flexible InZnSnO (IZTO) films grown on polyethylene terephthalate substrates using linear facing target sputtering (LFTS) at room temperature. The electrical and optical properties of IZTO film grown by LFTS were significantly influenced by TSD while the structural and surface properties of IZTO film were not affected by TSD, unlike conventional magnetron sputtering. Regardless of TSD, all IZTO film showed completely amorphous structure with very low root mean square roughness of 0.33 nm, due to the low kinetic energy of sputtered IZTO atoms and a substrate position that did not directly face the targets. Based on the figure of merit value, the optimized TSD for deposition of flexible IZTO films is 2.5 cm. At optimized conditions, the IZTO film showed a sheet resistance of 23.1 {Omega}/sq and an optical transmittance of 80%.

36 MATERIALS SCIENCE↗

Oxidation resistance of quintuple Ti-Al-Si-C-N coatings and associated mechanism

The oxidation behavior of Ti-Al-Si-C-N hard coatings with different Al contents deposited on high-speed steel and Si substrates by hybrid arc-enhanced magnetron sputtering is investigated in the temperature range of 500 Degree-Sign C-1000 Degree-Sign C. The coating hardness is maintained at around 35 GPa, and the parabolic oxidation rate constant K{sub p} at 1000 Degree-Sign C decreases to 3.36 Multiplication-Sign 10{sup -10} kg{sup 2} m{sup -4} s{sup -1} when the Al concentration is increased to 30 at. %, indicating that Ti-Al-Si-C-N coatings with larger Al concentrations have better oxidation resistance. X-ray diffraction, cross-sectional scanning electron microscopy, and x-ray photoelectron spectroscopy reveal a protective surface layer consisting of Al{sub 2}O{sub 3}, TiO{sub 2}, and SiO{sub 2} that retards inward oxygen diffusion. A mechanism is proposed to elucidate the oxide formation. As a consequence of the good oxidation resistance, the Ti-Al-Si-C-N coatings have a large potential in high-speed dry cutting as well as other high temperature applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Biaxial texture development in aluminum nitride layers during off-axis sputter deposition

Polycrystalline aluminum nitride (AlN) layers were deposited by pulsed-dc reactive magnetron sputtering from a variable deposition angle {alpha} = 0 Degree-Sign -84 Degree-Sign in 5 mTorr pure N{sub 2} at room temperature. X-ray diffraction pole figure analyses show that layers deposited from a normal angle ({alpha} = 0 Degree-Sign ) exhibit fiber texture, with a random in-plane grain orientation and the c-axis tilted by 42 Degree-Sign {+-} 2 Degree-Sign off the substrate normal, yielding wurtzite AlN grains with the {l_brace}1012{r_brace} plane approximately parallel ({+-}2 Degree-Sign ) to the substrate surface. However, as {alpha} is increased to 45 Degree-Sign , two preferred in-plane grain orientations emerge, with populations I and II having the c-axis tilted toward and away from the deposition flux, by 53 Degree-Sign {+-} 2 Degree-Sign and 47 Degree-Sign {+-} 1 Degree-Sign off the substrate normal, respectively. Increasing {alpha} further to 65 Degree-Sign and 84 Degree-Sign , results in the development of a single population II with a 43 Degree-Sign {+-} 1 Degree-Sign tilt. This developing biaxial texture is attributed to a competitive growth mode under conditions where the adatom mobility is sufficient to cause intergrain mass transport, but insufficient for the thermodynamically favored low energy {l_brace}0001{r_brace} planes to align parallel to the layer surface. Consequently, AlN nuclei are initially randomly oriented and form a kinetically determined crystal habit exposing {l_brace}0001{r_brace} and {l_brace}1120{r_brace} facets. The expected direction of its highest growth rate is 49 Degree-Sign {+-} 5 Degree-Sign tilted relative to the c-axis, in good agreement with the 42 Degree-Sign -53 Degree-Sign measured tilt. The in-plane preferred orientation for {alpha} > 0 Degree-Sign is well explained by the orientation dependence in the cross section of the asymmetric pyramidal nuclei to capture directional deposition flux. The observed tilt is ideal for shear mode electromechanical coupling, which is maximized at 48 Degree-Sign .

36 MATERIALS SCIENCE↗

Resonant surface enhancement of Raman scattering of Ag nanoparticles on silicon substrates fabricated by dc sputtering

Ag nanoparticles (AgNPs) were deposited onto silicon substrates by direct current (dc) magnetron sputtering. The influences of sputtering power and sputtering time on the AgNP film morphology were studied using atomic force microscopy. The particle size was successfully tuned from 19 nm to 53 nm by varying the sputtering time at a dc power of 10 W. When Rhodamine 6 G (R6G) was used as the probe molecule, the AgNP films showed significant surface enhanced Raman scattering effect. In particular, it is found that larger particles show stronger enhancement for lower concentrations of R6G while smaller particles display stronger enhancement for higher concentrations of R6G.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

New oxygen radical source using selective sputtering of oxygen atoms for high rate deposition of TiO{sub 2} films

We have developed a new oxygen radical source based on the reactive sputtering phenomena of a titanium target for high rate deposition of TiO{sub 2} films. In this oxygen radical source, oxygen radicals are mainly produced by two mechanisms: selective sputter-emission of oxygen atoms from the target surface covered with a titanium oxide layer, and production of high-density oxygen plasma in the space near the magnetron-sputtering cathode. Compared with molecular oxygen ions, the amount of atomic oxygen radicals increased significantly with an increase in discharge current so that atomic oxygen radicals were mainly produced by this radical source. It should be noted that oxygen atoms were selectively sputtered from the target surface, and titanium atoms sputter-emitted from the target cathode were negligibly small. The amount of oxygen radicals supplied from this radical source increased linearly with increasing discharge current, and oxygen radicals of 1 Multiplication-Sign 10{sup 15} atoms/s/cm{sup 2} were supplied to the substrate surface at a discharge current of 1.2 A. We conclude that our newly developed oxygen radical source can be a good tool to achieve high rate deposition and to control the structure of TiO{sub 2} films for many industrial design applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Semiconducting p-type MgNiO:Li epitaxial films fabricated by cosputtering method

Li-doped ternary Mg{sub x}Ni{sub 1-x}O thin films were deposited on (0001) Al{sub 2}O{sub 3} substrates by a radio frequency (RF) magnetron cosputtering method with MgO and NiO:Li targets. The Mg mole fraction and Li content were relatively controlled by changing RF power for the MgO target over a range of 0-300 W, while the NiO:Li target was kept at 150 W. As a result, all films were epitaxially grown on (0001) Al{sub 2}O{sub 3} substrates with the relationship of [110]{sub NiO}||[1110]{sub Al2O3}, [112]{sub NiO}||[2110]{sub Al2O3} (in-plane), and [111]{sub NiO}||[0001]{sub Al2O3} (out-of-plane), and showed p-type semiconducting properties. Furthermore, from x-ray diffraction patterns, the authors found that MgO was effectively mixed with NiO:Li without structural deformation due to low lattice mismatch (0.8%) between NiO and MgO. However, the excess Li contents degraded the crystallinity of the MgNiO films. The band-gap of films was continuously shifted from 3.66 eV (339 nm) to 4.15 eV (299 nm) by the RF power of the MgO target. A visible transmittance of more than 80% was exhibited at RF powers higher than 200 W. Ultimately, the electrical resistivity of p-type MgNiO films was improved from 7.5 to 673.5 {Omega}cm, indicating that the Li-doped MgNiO films are good candidates for transparent p-type semiconductors.

36 MATERIALS SCIENCE↗

Epitaxial V{sub 0.6}W{sub 0.4}N/MgO(001): Evidence for ordering on the cation sublattice

V{sub 0.6}W{sub 0.4}N alloys are grown on MgO(001) by ultrahigh vacuum reactive magnetron sputtering from V and W targets in 10 mTorr pure-N{sub 2} atmospheres at temperatures T{sub s} ranging from 600 to 900 Degree-Sign C. Based on x-ray diffraction and transmission electron microscopy results, all films have the B1-NaCl crystal structure and grow with a cube-on-cube epitaxial relationship to the substrate, (001){sub VWN} Double-Vertical-Line (001){sub MgO} and [100]{sub VWN} Double-Vertical-Line [100]{sub MgO}. Rutherford backscattering spectrometry analyses show that the N content in V{sub 0.6}W{sub 0.4}N{sub x} alloys decreases with increasing T{sub s} from overstoichiometric with x = 1.13 at 600 Degree-Sign C, to approximately stoichiometric with x = 1.08 at 700 Degree-Sign C, to understoichiometric at 800 Degree-Sign C (x = 0.80) and 900 Degree-Sign C (x = 0.75). High-resolution scanning transmission electron microscopy, Z-contrast, and selected-area electron diffraction investigations of V{sub 0.6}W{sub 0.4}N(001) alloys grown at 600 and 700 Degree-Sign C reveal the onset of W ordering on adjacent 111 planes of the metal sublattice; no ordering is observed for understoichiometric films grown at higher temperatures.

36 MATERIALS SCIENCE↗

Investigation of structure, magnetic, and transport properties of Mn-doped SiC films

Mn-doped SiC films were fabricated by radio frequency magnetron sputtering technique. The structure, composition, and magnetic and transport properties of the films were investigated. The results show the films have the 3C-SiC crystal structure and the doped Mn atoms in the form of Mn{sup 2+} ions substitute for C sites in SiC lattice. All the films are ferromagnetic at 300 K, and the ferromagnetism in films arises from the doped Mn atoms and some extended defects. In addition, the saturation magnetization increases with the Mn-doped concentration increasing. The Mn doping does not change the semiconductor characteristics of the SiC films.

36 MATERIALS SCIENCE↗

Effect of process parameters on properties of argon–nitrogen plasma for titanium nitride film deposition

In this study, the effect of working pressure and input power on the physical properties and sputtering efficiencies of argon–nitrogen (Ar/N{sub 2}) plasma in direct current magnetron discharge is investigated. The discharge in Ar/N{sub 2} is used to deposit TiN films on high speed steel substrate. The physical plasma parameters are determined by using Langmuir probe and optical emission spectroscopy. On the basis of the different reactions in the gas phase, the variation of plasma parameters and sputtering rate are explained. A prominent change of electron temperature, electron density, ion density, and degree of ionization of Ar is found as a function of working pressure and input power. The results also show that increasing working pressure exerts a negative effect on film deposition rate while increasing input power has a positive impact on the same. To confirm the observed physical properties and evaluate the texture growth as a function of deposition parameters, x-ray diffraction study of deposited TiN films is also done.

36 MATERIALS SCIENCE↗

Characterization and photoluminescence of Co-doped SiC films

Co-doped SiC films are fabricated on Si (100) substrates by radio frequency magnetron sputtering, and the crystal structure, composition, element valences, local structure, and photoluminescence of the films are studied. Crystal structure analysis identifies the film structure as 3C-SiC and shows that the Co dopant atoms form CoSi secondary phase compounds in the films. The composition and element valence analysis show that the Co dopant atoms substituting for C sites in the SiC lattice exist in the form of Co{sup 2+} ions, and that C clusters are present in the films, which increase in amount with increasing Co dopant concentration. The analysis of local structure reveals that Co clusters, CoO and Co{sub 3}O{sub 4}, are not present in the films, and CoSi secondary phase compounds exist. All of the films show a violet photoluminescence peak located at 413 nm, which becomes stronger with increased Co dopant concentration and annealing temperature, and is found to originate from the C clusters.

36 MATERIALS SCIENCE↗

Characteristics of Al-doped ZnO thin films prepared in Ar + H{sub 2} atmosphere and their vacuum annealing behavior

The microstructure and electrical–optical properties of Al-doped ZnO (AZO) films have been studied as a function of H{sub 2} flux in the magnetron sputtering process at 150 °C and postannealing temperature in vacuum. As H{sub 2} flux increases in the sputtering gas, the AZO films deposited have a (002) preferred orientation rather than the mixed (100) and (002) orientations, the grain size shows a tendency to first increase then decrease, and (002) diffraction peak position is inclined to shift to higher angles first then to lower angles. The resistivity of the films first decreases then increases with H{sub 2} flux, and the lowest resistivity of 4.02 × 10{sup −4}Ω cm is obtained at a H{sub 2} flux of 10 sccm. The average transmittance in the visible region shows little dependence on H{sub 2} flux. As a whole, the AZO films with higher values of figure of merit are obtained when the H{sub 2} flux is in the range of 6–12 sccm. The AZO films deposited in Ar and Ar + H{sub 2} exhibit different annealing behaviors. For the AZO film deposited in Ar, the grain size gradually increases, the stresses are relaxed, the resistivity first decreases then increases, and the average transmittance in the visible region is unchanged initially then somewhat decreased as annealing temperature is increased. The optimum annealing temperature for improving properties of AZO films deposited in Ar is 300 °C. For the AZO films deposited in Ar + H{sub 2}, annealing does not significantly change the microstructure but increases the resistivity of the films; the average transmittance in the visible region remains unchanged initially but greatly reduced with further increase in annealing temperature. The carrier transport in the as-deposited and annealed films appears to be controlled by a mechanism of grain boundary scattering, and the value of E{sub g} increases with the increase in carrier concentration due to Burstein–Moss effect.

36 MATERIALS SCIENCE↗

Effect of Mn doping on the structural, optical, and magnetic properties of In{sub 2}O{sub 3} films

(In{sub 1−x}Mn{sub x}){sub 2}O{sub 3} films were grown by radio frequency-magnetron sputtering technique. Effect of Mn doping on the structural, optical, and magnetic properties of films is investigated systematically. The detailed structure analyses suggest that Mn ions substitute for In{sup 3+} sites of the In{sub 2}O{sub 3} lattice in the valence of +2 states, and Mn-related secondary phases or clusters as the source of ferromagnetism is safely ruled out. All films show typical room temperature ferromagnetism. The saturation magnetization M{sub s} increases first, and then decreases, while carrier concentration n{sub c} decreases monotonically with Mn doping, implying that the ferromagnetism is not directly induced by the mediated carriers. The optical bandgap E{sub g} of films decreases monotonically with the increase of Mn concentration, and there exists a linear functional dependence between E{sub g} and n{sub c}{sup 2/3}, which is consistent with Burstein-Moss shift arguments. It can be concluded that the ferromagnetic order in Mn-doped In{sub 2}O{sub 3} films is intrinsic, arising from Mn atoms substitution for the In sites of In{sub 2}O{sub 3} lattice. The oxygen vacancies play a mediation role on the ferromagnetic couplings between the Mn ions.

36 MATERIALS SCIENCE↗

Colored hard coatings with AlN–TiN multilayer structures

AlN–TiN multilayer structures can be used to extend the color gamut of hard coatings while maintaining good hardness and corrosion resistance. This study used reactive magnetron sputtering on a glass substrate to produce coatings with a microhardness of 19 GPa as well as optical reflectance exceeding 80% and controllable saturation (chroma) for various hues of red, yellow, green, blue, and purple. The authors characterized the complex index of refraction of the TiN films using ellipsometry; the real refractive indices of the AlN films were derived from the reflectance values obtained using photometry. Finally, the colors of the samples were quantified using CIE-1931 chromaticity coordinates in the L*a*b* color space, and the microhardness of the films was measured using a nanoindenter. Simulation results using a multiple-beam-interference recursive method presented good consistency with experimental measurements with regard to the optical reflective spectra of AlN–TiN multilayer thin film samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of thermal annealing on the properties of transparent conductive In–Ga–Zn oxide thin films

Amorphous In–Ga–Zn oxide (IGZO) thin films were prepared using radio frequency magnetron sputtering at room temperature. Upon thermal annealing at temperatures even up to 500 °C, the amorphous characteristics were still maintained, but the electronic properties could be considerably enhanced. This could be ascribed to the increased optical band gap and the increased oxygen vacancies, as corroborated by the microstructure characterizations. In addition, the surface became smoother upon thermal annealing, guaranteeing good interface contact between electrode and a-IGZO. The optical transmittance at 400–800 nm exceeded 90% for all samples. All in all, thermal annealing at appropriate temperatures is expected to improve the performances of relevant a-IGZO thin film transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antibacterial properties and cytocompatibility of tantalum oxide coatings with different silver content

Tantalum (Ta) oxides and their coatings have been proved to increase their applications in the biomedical fields by improving osseointegration and wear resistance. In this study, Ta oxide coatings containing different proportions of Ag are deposited on SS304 materials. A twin-gun magnetron sputtering system is used to deposit the tantalum oxide-Ag coating. In this study, Staphylococcus aureus, which exhibits physiological commensalism on the human skin, nares, and mucosal and oral areas, is chosen as the model for in vitro antibacterial analyses via a fluorescence staining method using Syto9. The cytocompatibility and adhesive morphology of human skin fibroblast cells (CCD-966SK) on the coatings are also determined by using the microculture tetrazolium assay. This study shows that Ta{sub 2}O{sub 5} and Ta{sub 2}O{sub 5}-Ag coatings with 12.5 at. % of Ag exhibit improved antibacterial effects against S. aureus and have good skin fibroblast cell cellular biocompatibility.

36 MATERIALS SCIENCE↗