Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Liquid Extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

High energy x-ray and neutron studies of disordered energy-related materials at extreme conditions

The fundamental scientific accomplishments are: (1) advances in a general description of the liquid state by employing structural models constrained by measurements to interpret experimental results and extend them to liquids in general, with special emphasis on (2) The structure of the high-temperature crystal and molten UO 2 and 3) water. Specifically, samples of UO 2 and water were probed using high-energy x-rays at the Advanced Photon Source. The high Z of UO 2 , and the 2-3mm diameter droplet shape of the molten sample, means that >100keV X-rays are required to minimize absorption and multiple scattering, which can distort the measured structure factor. A high flux of x-rays is also required to obtain sufficient statistical accuracy in short (a few seconds) measurement times. The scattered x-ray data were analyzed and pair distribution functions, extracted that characterize the local and long-range atomic structure of the material. The measurements of the hot UO 2 solid show a substantial increase in oxygen disorder and, upon melting, the average U-O coordination was found to decrease from 8 to 6.7±0.5. The research incorporated development of diffraction techniques, sample environment optimization and state-of-the-art simulation techniques. The symbiotic nature of the advances in simulation and experiment allowed for a more focused and informed development of future experiments, effective use of expensive beam time and generated new research agendas for the growing number of research groups, within the US and internationally, that focus on the structure of liquids. Molecular dynamics (MD) provided detailed information when combined with high-quality XN data including addressing key issues in liquids; the relationship between cooling path, structure and fictive temperature, and the trade-offs between network over connectedness in liquids containing low-coordination cations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Meas. K+ -Ar Total Inelastic Cross Section at ProtoDUNE-SP

ProtoDUNE-SP is a single-phase liquid argon time projection chamber that took hadron test beam data in 2018. The test beam included positively charged kaons with test beam momenta of 6 GeV/c and 7 GeV/c, providing a sample to study kaons to benefit future DUNE proton decay and neutrino interaction studies with kaons in the final state. The total inelastic cross section of a positively charged kaon was measured at these test beam settings using the LArIAT thin-slice method of dividing the wires of the time projection chamber into target slices for calculating the cross section, which leverages the monolithic quality of liquid argon detectors. A Bayesian-like unfolding method using RooUnfold was applied to both the incident and interacting slice distributions to measure the cross sections at both test beam momenta. The talk will discuss the method of unfolding, optimization studies for unfolding, and applying systematic uncertainties using a LArIAT-style hadronic cross section using unfolding to extract a kaon total inelastic cross section.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of Charmonium Production in $p + p$ and $p + d$ Interactions in the Fermilab SeaQuest Experiment

The Fermilab SeaQuest experiment has measured dimuon events from the interactions of 120GeV proton beam on liquid hydrogen and deuterium targets with dimuon mass between 2 and 9GeV. These dimuon events contain both the Drell-Yan process and the charmonium ($J/\psi$ and $\psi^\prime$) production. Unlike the Drell-Yan process which probes the antiquark distributions in the nucleons, the charmonium production is sensitive to both quark and gluon distributions. SeaQuest has extracted the $\sigma^{pd}/2\sigma^{pp}$ ratio as well as the differential cross sections for charmonium production in the kinematic region of $0.4 < x_F < 0.9$. The $\sigma^{pd}/2\sigma^{pp}$ ratio for charmonium production are found to be significantly different from that of the Drell-Yan process. The measured differential cross sections for charmonium production are compared with theoretical calculations using Color Evaporation Model and Non-Relativistic QCD model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TORCHE - Toolbox for Reactor Cross-Flow Heat Exchangers

As interest within the scientific community for the development of small modular reactors (SMRs) grows, utilizing compact and cross-flow heat exchangers present many design advantages. Cross-flow configurations of tube bundles allow water, liquid metal, or a molten salt to be contained within the tube side or shell side in an efficient spatial arrangement. The goal of this project is to provide the user with an easy-to-use set of tools for cross-flow heat exchanger design. The tools are intended to require little to no geometric set-up like meshing in a CFD code in order to enable rapid preliminary design and optimization. With this set of simple Python scripts, the user can determine the necessary quantities and correctional factors in order to assess the heat exchanger characteristics. The two characteristics used in designing novel and efficient heat exchangers incorporated into this work currently are pressure drop and heat transfer coefficients. In support of these efforts, the literature has been scoured for sources of experimental data and proposed methods for calculating pressure drop and heat transfer in cross-flow tube banks. Several empirical correlations and methodologies for calculating pressure drop and heat transfer incorporated into the Toolbox for Reactor Cross-Flow Heat Exchangers (TORCHE). TORCHE is an expansion on the cross-flow pressure drop scripts reported by Haefner et al.. Presented in this summary is a synopsis of the empirical correlations and methodologies of pressure drops and heat transfer coefficient. A validation effort of these models is also presented to provide confidence in the implementation. For this validation of TORCHE, experimental data has been gathered and extracted from graphs in the literature. Error bars were not reported in the experimental data used in this summary and therefore is not included in the analysis.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

X-ray and Neutron Reflectivity Studies of Styrene-Maleic Acid Copolymer Interactions with Galactolipid-Containing Monolayers

Styrene-maleic acid (SMA) copolymers have recently gained attention for their ability to facilitate the detergent-free solubilization of membrane protein complexes and their native boundary lipids into polymer-encapsulated, nanosized lipid particles, referred to as SMALPs. However, the interfacial interactions between SMA and lipids, which dictate the mechanism, efficiency, and selectivity of lipid and membrane protein extraction, are barely understood. Our recent finding has shown that SMA 1440, a chemical derivative of the SMA family with a functionalized butoxyethanol group, was most active in galactolipid-rich membranes, as opposed to phospholipid membranes. In the present work, we have performed X-ray reflectometry (XRR) and neutron reflectometry (NR) on the lipid monolayers at the liquid–air interface followed by the SMA copolymer adsorption. XRR and Langmuir Π–A isotherms captured the fluidifying effect of galactolipids, which allowed SMA copolymers to infiltrate easily into the lipid membranes. NR results revealed the detailed structural arrangement of SMA 1440 copolymers within the membranes and highlighted the partition of butoxyethanol group into the lipid tail region. In conclusion, this work allows us to propose a possible mechanism for the membrane solubilization by SMA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Statistical properties of autonomous flows in 2D active nematics

We study the dynamics of a tunable 2D active nematic liquid crystal composed of microtubules and kinesin motors confined to an oil–water interface. Kinesin motors continuously inject mechanical energy into the system through ATP hydrolysis, powering the relative microscopic sliding of adjacent microtubules, which in turn generates macroscale autonomous flows and chaotic dynamics. We use particle image velocimetry to quantify two-dimensional flows of active nematics and extract their statistical properties. In agreement with the hydrodynamic theory, we find that the vortex areas comprising the chaotic flows are exponentially distributed, which allows us to extract the characteristic system length scale. We probe the dependence of this length scale on the ATP concentration, which is the experimental knob that tunes the magnitude of the active stress. In conclusion, our data suggest a possible mapping between the ATP concentration and the active stress that is based on the Michaelis–Menten kinetics that governs the motion of individual kinesin motors.

99 GENERAL AND MISCELLANEOUS↗

Spatial Heterodyne Raman Spectrometer (SHRS) for In Situ Chemical Sensing Using Sapphire and Silica Optical Fiber Raman Probes

A spatial heterodyne Raman spectrometer (SHRS), constructed using a modular optical cage and lens tube system, is described for use with a commercial silica and a custom single-crystal (SC) sapphire fiber Raman probe. The utility of these fiber-coupled SHRS chemical sensors is demonstrated using 532 nm laser excitation for acquiring Raman measurements of solid (sulfur) and liquid (cyclohexane) Raman standards as well as real-world, plastic-bonded explosives (PBX) comprising 1,3,5- triamino- 2,4,6- trinitrobenzene (TATB) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) energetic materials. The SHRS is a fixed grating-based dispersive interferometer equipped with an array detector. Each Raman spectrum was extracted from its corresponding fringe image (i.e., interferogram) using a Fourier transform method. Raman measurements were acquired with the SHRS Littrow wavelength set at the laser excitation wavelength over a spectral range of ∼1750 cm −1 with a spectral resolution of ∼8 cm −1 for sapphire and ∼10 cm −1 for silica fiber probes. The large aperture of the SHRS allows much larger fiber diameters to be used without degrading spectral resolution as demonstrated with the larger sapphire collection fiber diameter (330 μm) compared to the silica fiber (100 μm). Unlike the dual silica fiber Raman probe, the dual sapphire fiber Raman probe did not include filtering at the fiber probe tip nearest the sample. Even so, SC sapphire fiber probe measurements produced less background than silica fibers allowing Raman measurements as close as ∼85 cm −1 to the excitation laser. Despite the short lengths of sapphire fiber used to construct the sapphire probe, well-defined, sharp sapphire Raman bands at 420, 580, and 750 cm −1 were observed in the SHRS spectra of cyclohexane and the highly fluorescent HMX-based PBX. SHRS measurements of the latter produced low background interference in the extracted Raman spectrum because the broad band fluorescence (i.e., a direct current, or DC, component) does not contribute to the interferogram intensity (i.e., the alternating current, or AC, component). SHRS spectral resolution, throughput, and signal-to-noise ratio are also discussed along with the merits of using sapphire Raman bands as internal performance references and as internal wavelength calibration standards in Raman measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Differential Gene Expression in A Cross-Feeding Two-Species Model Microbial Community Under Simulated Microgravity and Deep-Space Radiation

A long-term goal of space biology is to understand interspecies microbial interactions in space. Presently, little is known about the combined effect of microgravity and ionizing radiation on bacterial community response when species are interdependent through exchange of metabolites in fluid medium (cross-feeding). Microgravity is expected to slow interspecies mass transfer and growth in cross-feeding communities in the low-shear, diffusion-limited environment, while ionizing radiation may influence stress response to direct (DNA damage) and indirect damage (ROS). Using a well-understood, two-species (Escherichia coli and Salmonella enterica) microbial community engineered to be a model for studying cross-feeding, we simulated galactic cosmic rays (GCRsim) and microgravity to test the hypothesis: exposure to ionizing radiation causes cell damage or stress, altering transcriptomic community responses in metabolically interdependent cells, which is exacerbated by microgravity. We expect to see differential gene expression between cross-feeding and non-cross-feeding communities. We measured GCRsim effects on growth and gene expression in well-mixed versus simulated-microgravity conditions and in cross-feeding and non-cross-feeding medium. Microbial cultures were inoculated into liquid medium in rotating wall vessels (RWV) with different rotation rates: 5 RPM (simulated microgravity) and 50 RPM (well-mixed). The E. coli-S. enterica consortium, under simulated microgravity, were exposed to 500 mGy of Simplified 5-ion Galactic Cosmic Ray Simulation for 2 hours at Brookhaven National Lab. We harvested samples 40 minutes after irradiation for extraction and sequencing (NASA GeneLab). Here we present the differential gene expression analysis results, which reveal altered transcriptomic community responses, even where growth rate differences are not observed. Gene expression of these actively metabolizing microbial communities in GCRsim may illuminate molecular mechanisms of microbial interactions in space. Understanding how microbial community gene expression, metabolism, and other cellular processes are influenced by spaceflight stressors can inform the use of microbes in human life support for low Earth orbit missions and beyond.

microgravity↗

Oxygen-producing inert anodes for SOM process

An electrolysis system for generating a metal and molecular oxygen includes a container for receiving a metal oxide containing a metallic species to be extracted, a cathode positioned to contact a metal oxide housed within the container; an oxygen-ion-conducting membrane positioned to contact a metal oxide housed within the container; an anode in contact with the oxygen-ion-conducting membrane and spaced apart from a metal oxide housed within the container, said anode selected from the group consisting of liquid metal silver, oxygen stable electronic oxides, oxygen stable crucible cermets, and stabilized zirconia composites with oxygen stable electronic oxides.

42 ENGINEERING↗

Recent Approaches to Modeling Transport of Mercury in Surface Water and Groundwater - Case Study in Upper East Fork Poplar Creek, Oak Ridge, TN - 13349

In this case study, groundwater/surface water modeling was used to determine efficacy of stabilization in place with hydrologic isolation for remediation of mercury contaminated areas in the Upper East Fork Poplar Creek (UEFPC) Watershed in Oak Ridge, TN. The modeling simulates the potential for mercury in soil to contaminate groundwater above industrial use risk standards and to contribute to surface water contamination. The modeling approach is unique in that it couples watershed hydrology with the total mercury transport and provides a tool for analysis of changes in mercury load related to daily precipitation, evaporation, and runoff from storms. The model also allows for simulation of colloidal transport of total mercury in surface water. Previous models for the watershed only simulated average yearly conditions and dissolved concentrations that are not sufficient for predicting mercury flux under variable flow conditions that control colloidal transport of mercury in the watershed. The transport of mercury from groundwater to surface water from mercury sources identified from information in the Oak Ridge Environmental Information System was simulated using a watershed scale model calibrated to match observed daily creek flow, total suspended solids and mercury fluxes. Mercury sources at the former Building 81-10 area, where mercury was previously retorted, were modeled using a telescopic refined mesh with boundary conditions extracted from the watershed model. Modeling on a watershed scale indicated that only source excavation for soils/sediment in the vicinity of UEFPC had any effect on mercury flux in surface water. The simulations showed that colloidal transport contributed 85 percent of the total mercury flux leaving the UEFPC watershed under high flow conditions. Simulation of dissolved mercury transport from liquid elemental mercury and adsorbed sources in soil at former Building 81-10 indicated that dissolved concentrations are orders of magnitude below a target industrial groundwater concentration beneath the source and would not influence concentrations in surface water at Station 17. This analysis addressed only shallow concentrations in soil and the shallow groundwater flow path in soil and unconsolidated sediments to UEFPC. Other mercury sources may occur in bedrock and transport though bedrock to UEFPC may contribute to the mercury flux at Station 17. Generally mercury in the source areas adjacent to the stream and in sediment that is eroding can contribute to the flux of mercury in surface water. Because colloidally adsorbed mercury can be transported in surface water, actions that trap colloids and or hydrologically isolate surface water runoff from source areas would reduce the flux of mercury in surface water. Mercury in soil is highly adsorbed and transport in the groundwater system is very limited under porous media conditions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Groundwater Remediation in a Flood plain Aquifer at Shiprock, New Mexico - 16097

The Shiprock, New Mexico, Disposal Site is the location of a former uranium and vanadium ore-processing mill that operated from 1954 to 1968. During milling years, tailings leachate and other mill-related liquids migrated into underlying sediments, resulting in the contamination of groundwater beneath the river terrace containing the mill and a nearby flood plain alluvial aquifer adjacent to the San Juan River. The US DOE Office of Legacy Management manages the site and is implementing the current groundwater remedy for the flood plain area, consisting of natural flushing supplemented by extraction of alluvial groundwater to accelerate reduction in contaminant concentrations. The alluvial aquifer contains elevated concentrations of sulfate, uranium, and nitrate derived largely from the historical eastward migration of groundwater through terrace alluvium and underlying bedrock to the flood plain. The bedrock formation beneath the entire Shiprock site is Mancos shale, which forms an escarpment that separates the terrace from the flood plain. Contamination in the flood plain alluvial aquifer is influenced by a dynamic flow system that changes seasonally and from year to year. Simulations with a flood plain flow model based on monitored groundwater levels and coincident river-surface elevations show that background groundwater flow, unaffected by remediation pumping, is characterized by distinct hydraulic conditions for three separate periods each year. During months of low river flow in winter and early spring, river losses to the aquifer create a large hypo-rheic zone in the south half of the flood plain. Simultaneously, recharge of continually flowing surface water emptying onto the north half of the flood plain from Bob Lee Wash creates divergent, radial flow from the wash outlet and diverts northwestward-migrating contaminant plumes to the northeast where they discharge to the river. Subsequent bank storage processes in May and June from high snow melt runoff change background flow directions, increasing the spread of contamination in the alluvium. From mid-summer through fall, river flows are typically similar in value to those observed prior to the onset of snow melt, but groundwater elevations in the aquifer are noticeably lower than water levels observed in winter and early spring and may induce river losses to the aquifer. Several different contaminant sources have impacted the alluvial aquifer. Much of the contamination originated as tailings leachate and raffinate wastewater that infiltrated the terrace subsurface and eventually reached the flood plain at the escarpment. Additional sources of contamination in the aquifer included discharge of mill effluent to Bob Lee Wash and a pond at the base of the escarpment, and aqueous mobilization of solid-phase contamination in the form of windblown deposits and contaminants adsorbed to alluvial sediments. The degree to which remnant, secondary-source processes, such as leaching of solid-phase deposits and discharge of terrace groundwater across the escarpment, contribute to existing contaminant plumes is uncertain. The flood plain remediation system consists of two groundwater extraction wells, pumping from two horizontal wells placed in trenches near the base of the escarpment, a sump collecting discharges from seeps in the escarpment wall, and discharge of collected water to an evaporation pond on the terrace. Flow-model simulations indicate that most contaminated areas are captured by remediation pumping, resulting in several zones of freshwater between the river and the escarpment. Despite the highly transient nature of groundwater flow beneath the flood plain and the varied contaminant sources, initiation of remediation pumping in 2003 and coordinated operation of the system's various components have successfully removed large amounts of contaminant mass and helped prevent discharge of contaminated groundwater to the river. The percentage reductions of dissolved sulfate, uranium, and nitrate mass in the aquifer estimated for the first 9 years of remediation range from 40% to 72%. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Optimal Design of Ozone Bleaching Parameters to Approach Cellulose Nanofibers Extraction from Sugarcane Bagasse Fibers

Cellulose nanofibers (CNFs) were isolated from sugarcane bagasse (SCB) through the combination of bio-refinery, sulfur-free, and totally chlorine free (TCF) chemo-mechanical pretreatments, with a focus on the optimal design of ozone bleaching parameters based on a response surface methodology (RSM). For this purpose, the most effective parameters in ozone bleaching (temperature, time, and pulp consistency) were set between 40 and 85 °C, 60 and 360 min, and 1–5 wt%, respectively. High-performance liquid chromatography (HPLC), Fourier transform infrared spectroscopy (FTIR), Kappa number, and scanning electron microscopy (SEM) were used to chemically and morphologically characterize the SCB fibers. The size distribution and morphology of CNFs were also evaluated by dynamic light scattering (DLS) and transmission electron microscopy (TEM). HPLC analysis revealed that percentage of cellulose increased from 41.5 to 91.39% after chemical pretreatments. FTIR and Kappa number analyses also confirmed the successful isolation of cellulose fibers from the SCB fibers after chemical pretreatments. Furthermore, DLS results showed that the hydrodynamic diameter of the isolated cellulose fibers reduced to 268 nm by dint of ultrasonication. Additionally, TEM images confirmed the isolation of CNFs: the average diameter of cellulose fibers decreased to about 28 nm after mechanical steps and the yield of fibrillation was found to be around 99%. According to the obtained results, the applied chemo-mechanical treatment appears to be promising for green and facile isolation of CNFs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Prediction of Liquid Slosh Damping Using a High Resolution CFD Tool

Propellant slosh is a potential source of disturbance critical to the stability of space vehicles. The slosh dynamics are typically represented by a mechanical model of a spring mass damper. This mechanical model is then included in the equation of motion of the entire vehicle for Guidance, Navigation and Control analysis. Our previous effort has demonstrated the soundness of a CFD approach in modeling the detailed fluid dynamics of tank slosh and the excellent accuracy in extracting mechanical properties (slosh natural frequency, slosh mass, and slosh mass center coordinates). For a practical partially-filled smooth wall propellant tank with a diameter of 1 meter, the damping ratio is as low as 0.0005 (or 0.05%). To accurately predict this very low damping value is a challenge for any CFD tool, as one must resolve a thin boundary layer near the wall and must minimize numerical damping. This work extends our previous effort to extract this challenging parameter from first principles: slosh damping for smooth wall and for ring baffle. First the experimental data correlated into the industry standard for smooth wall were used as the baseline validation. It is demonstrated that with proper grid resolution, CFD can indeed accurately predict low damping values from smooth walls for different tank sizes. The damping due to ring baffles at different depths from the free surface and for different sizes of tank was then simulated, and fairly good agreement with experimental correlation was observed. The study demonstrates that CFD technology can be applied to the design of future propellant tanks with complex configurations and with smooth walls or multiple baffles, where previous experimental data is not available.

Yang, H. Q.↗

Avoiding Misannotation of In-Source Fragmentation Products as Cellular Metabolites in Liquid Chromatography–Mass Spectrometry-Based Metabolomics

Liquid chromatography–mass spectrometry (LC-MS) technology allows for rapid quantitation of cellular metabolites, with metabolites identified by mass spectrometry and chromatographic retention time. Recently, with the development of rapid scanning high-resolution high accuracy mass spectrometers and the desire for high throughput screening, minimal or no chromatographic separation has become increasingly popular. Furthermore, when analyzing complex cellular extracts, however, the lack of chromatographic separation could potentially result in misannotation of structurally related metabolites. Here, we show that, even using electrospray ionization, a soft ionization method, in-source fragmentation generates unwanted byproducts of identical mass to common metabolites. For example, nucleotide-triphosphates generate nucleotide-diphosphates, and hexose-phosphates generate triose-phosphates. We also evaluated yeast intracellular metabolite extracts and found more than 20 cases of in-source fragments that mimic common metabolites. Finally and accordingly, chromatographic separation is required for accurate quantitation of many common cellular metabolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Influence of Charge Correlation and Ion Solvation on the Phase Behavior of Single-Ion Conducting Polymer Blend Electrolytes Using SAXS/SANS

Single-ion conducting polymer blends (SICPBs) have demonstrated exceptional electrochemical performance as solid-state battery electrolytes; however, their nanoscale morphology and thermodynamic behavior remain unexplored. In this work, we investigate blends composed of deuterated poly(ethylene oxide) and poly[lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate], dPEO/P(LiMTFSI), and report the first experimental study of the nanostructures of charge-neutral polymer blends using small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS). Despite the macroscopic miscibility indicated by a single glass-transition temperature, SANS and SAXS results reveal disordered, charge-correlated nanostructures that are strongly influenced by blend composition and temperature. At low concentrations of charge polymer, the scattering is dominated by concentration fluctuations, and the random phase approximation is applied to extract values of the Flory–Huggins interaction parameter, χ SC . At higher charged polymer content, concentration fluctuations are suppressed, and a correlation model is used to characterize the nanostructures of the charge correlations. We find that the structures of the charge correlations are highly dependent on blend composition─consistent with predictions from Sing’s self-consistent field theory-liquid state models. Understanding these features is essential for uncovering the ion transport mechanism that leads to improved electrochemical performance previously reported in SICPB systems.

25 ENERGY STORAGE↗

Molecular Characterization of Organosulfates in Organic Aerosols from Shanghai and Los Angeles Urban Areas by Nanospray-Desorption Electrospray Ionization High-Resolution Mass Spectrometry

Aerosol samples collected in the urban areas of Shanghai and Los Angeles were analyzed by nanospray-desorption electrospray ionization mass spectrometry (nano-DESI MS) with high mass resolution (m/Δm=100,000). Solvent mixtures of acetonitrile/water and acetonitrile/toluene were used to extract and ionize polar and non-polar compounds, respectively. A diverse mixture of oxygenated hydrocarbons, organosulfates, organonitrates, and organics with reduced nitrogen were detected in the Los Angeles sample. Majority of the organics in the Shanghai sample were detected as organosulfates. The dominant organosulfates in the two samples have distinctly different molecular characteristics. Specifically, organosulfates in the Los Angeles sample were dominated by isoprene- or monoterpene-derived products, while organosulfates of yet unknown origin in the Shanghai sample had distinctive characteristics of long aliphatic carbon chains and low degree of oxidation and unsaturation. The use of acetonitrile/toluene solvent facilitated identification of this type of organosulfates, suggesting they could be missed in previous studies relying on sample extraction using common polar solvents. The high molecular weight and low degree of unsaturation and oxidization of the organosulfates detected in the Shanghai sample suggest that they may act as surfactants, and plausibly affect the surface tension and hygroscopicity of the atmospheric particulate matter. We propose that direct esterification of carbonyl or hydroxyl compounds by sulfates or sulfuric acid in liquid phase could be the formation pathway of these special organosulfates. Finally, long-chain alkanes from vehicle emissions might be their precursors.

Environmental Molecular Sciences Laboratory↗

Q weak : First direct measurement of the proton’s weak charge

The Q weak experiment, which took data at Jefferson Lab in the period 2010 - 2012, will precisely determine the weak charge of the proton by measuring the parity-violating asymmetry in elastic e-p scattering at 1.1 GeV using a longitudinally polarized electron beam and a liquid hydrogen target at a low momentum transfer of Q 2 = 0.025 (GeV/c) 2 . The weak charge of the proton is predicted by the Standard Model and any significant deviation would indicate physics beyond the Standard Model. The technical challenges and experimental apparatus for measuring the weak charge of the proton will be discussed, as well as the method of extracting the weak charge of the proton. Finally, the results from a small subset of the data, that has been published, will also be presented. Furthermore an update will be given of the current status of the data analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Critical fluid dynamics in two and three dimensions

We describe a numerical method for simulating stochastic fluid dynamics near a critical point in the Ising universality class. This theory is known as model H, and is expected to govern the nonequilibrium dynamics of quantum chromodynamics (QCD) near a possible critical endpoint of the phase transition between a hadron liquid and the quark-gluon plasma. The numerical algorithm is based on a Metropolis scheme, and automatically ensures that the distribution function of the hydrodynamic variables in equilibrium is independent of the transport coefficients and only governed by the microscopic free energy. We verify dynamic scaling near the critical point of a two and three-dimensional fluid and extract the associated critical exponent z. Here, we find z≃3 in three dimensions, and z≃2 for a two-dimensional fluid. In a finite system, we observe a crossover between the mean field value z=4 and the true critical exponent z≃3 (z≃2 in d=2). This crossover is governed by the values of the correlation length and the renormalized shear viscosity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗