Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

3.5 D temperature model of a coal stockpile

Overproduced coal mines that are not sold should remain in coal stock sites. If these coal stockpiles remain at the stock yards over a certain period of time, a spontaneous combustion can be started. Coal stocks under combustion threat can cost too much economically to coal companies. Therefore, it is important to take some precautions for saving the stockpiles from the spontaneous combustion. In this research, a coal stock which was 5 m wide, 10 m long, and 3 m in height, with a weight of 120 tons, was monitored to observe internal temperature changes with respect to time under normal atmospheric conditions. Internal temperature measurements were obtained at 20 points distributed all over the two layers in the stockpile. Temperatures measured by a specially designed mechanism were then stored into a computer every 3 h for a period of 3 months. Afterward, this dataset was used to delineate 3.5 D temporal temperature distribution models for these two levels, and they were used to analyze and interpret what was seen in these models to derive some conclusions. It was openly seen, followed, and analyzed that internal temperature changes in the stockpile went up to 31{sup o}C by 3.5 D models created for this research.

01 COAL, LIGNITE, AND PEAT↗

Distributed activation energy model parameters of some Turkish coals

A multi-reaction model based on distributed activation energy has been applied to some Turkish coals. The kinetic parameters of distributed activation energy model were calculated via computer program developed for this purpose. It was observed that the values of mean of activation energy distribution vary between 218 and 248 kJ/mol, and the values of standard deviation of activation energy distribution vary between 32 and 70 kJ/mol. The correlations between kinetic parameters of the distributed activation energy model and certain properties of coal have been investigated.

01 COAL, LIGNITE, AND PEAT↗

Model test on underground coal gasification (UCG) with low-pressure fire seepage push-through. Part I: Test conditions and air fire seepage

The technology of a pushing-through gallery with oxygen-enriched fire-seepage combustion was studied during shaft-free UCG in this article, and the main experiment parameters were probed. The test results were analyzed in depth. The patterns of variation and development were pointed out for the fire source moving speed, temperature field, leakage rate, the expanding diameter for the gasification gallery, and blasting pressure. Test results showed that, with the increase in the wind-blasting volume, the moving velocity for the fire source speeded up, and the average temperature for the gallery continuously rose. Under the condition of oxygen-enriched air blasting, when O{sub 2} contents stood at 90%, the moving speed for the fire source was 4-5 times that of air blasting. In the push-through process, the average leakage rate for the blasting was 82.23%, with the average discharge volume of 3.43 m{sup 3}/h and average gallery diameter of 7.87 cm. With the proceeding of firepower seepage, the extent of dropping for the leakage rate increased rapidly, and the drop rate for the blasting pressure gradually heightened.

01 COAL, LIGNITE, AND PEAT↗

The effect of minerals on the reactivity of coal char treated thermally

The effect of minerals on the reactivity of coal char is addressed in this article. The chars were prepared in N{sub 2} under the inert conditions from the raw coals and their demineralized samples. Thermo-gravimetric analysis (TGA) was used to examine the effect of the minerals in the coals on the reactivity of the derived chars. The effect of minerals on the reactivity of YXV char is different from that on the reactivity of JJV char. The behavior of minerals differs from each other and can be attributed to the different amount, nature, and distribution in the two coals.

01 COAL, LIGNITE, AND PEAT↗

Electricity from coal and utilization of coal combustion by-products

Most electricity in the world is conventionally generated using coal, oil, natural gas, nuclear energy, or hydropower. Due to environmental concerns, there is a growing interest in alternative energy sources for heat and electricity production. The major by-products obtained from coal combustion are fly ash, bottom ash, boiler slag, and flue gas desulfurization (FGD) materials. The solid wastes produced in coal-fired power plants create problems for both power-generating industries and environmentalists. The coal fly ash and bottom ash samples may be used as cementitious materials.

01 COAL, LIGNITE, AND PEAT↗

Effect of molten caustic leaching on demineralization and desulfurization of asphaltite

Molten caustic leaching process is effective in reducing significant amounts of ash-forming minerals, pyritic sulfur, and organic sulfur from solid fossil fuels. The effect of leaching asphaltite samples from Seguruk and Harbul collieries of Sirnak and Silopi asphaltite fields (situated in the Southeast Anatolia region of Turkey) with molten sodium hydroxide and followed by mild acid on demineralization and desulfurization was investigated. The effects of alkali/asphaltite ratio, time, and temperature on the leaching efficiency were detailed, and the experimental results are presented here. Chemical demineralization and desulfurization of asphaltite samples using molten sodium hydroxide were investigated in the temperature range of 200-400{sup o}C. The percentage of demineralization and desulfurization increased with the increase in alkali/asphaltite ratio. The removal of total sulfur and ash increased with increasing leaching temperature and time. Most of the inorganic sulfur and a significant portion of the organic sulfur were removed.

01 COAL, LIGNITE, AND PEAT↗

CO{sub 2} storage possibilities in karstik regions: A case study from southwestern Turkey

In Turkey, the three power plants (Yataan, Yenikoy, and Kemerkoy) in the southwestern part of Anatolia use Upper Miocene-Pliocene coal and cause environmental pollution in the winter. For this reason, some considerations have been given to the injection of CO{sub 2} from the power plants into the crust. A research project has been put into the practice for decreasing of global warming. Karstification and geological features, which are included in very thick carbonate rocks (a thickness over 2,000 m and limestone, dolomite, and marble from Paleozoic to Pliocene), and faults-lineaments have been considered as very important agents that will affect the injection of CO{sub 2}. The micro- and macro-karstification and lineament of the region have been studied, and the rocks of the area have been grouped into two classes based on the appropriateness of karstification as suitable and unsuitable rocks. Karstic and geological features (rocks and dislocation lines) have been compared together in a Geographic Information Systems (GIS); thus, by taking note of the geological-geomorphological characteristics of the area, a case study has been proposed for the CO{sub 2} injection from the Gokova power plant emissions with GIS applications, and suitable areas for the injection have been determined for further research.

01 COAL, LIGNITE, AND PEAT↗

Studies on preparation of coal water slurry using a natural additive

An eco-friendly additive isolated from a natural plant has been developed in the laboratory for preparation of coal water slurry (CWS) of some specific Indian coal. The effect of additive concentration, the rheological behavior of CWS at weight concentrations varying from 55-63.7% using a rotational viscometer, the static stability tests, etc., have been investigated. The nature of the slurries followed Bingham plastic behavior in these range of concentrations, and the slurry viscosity recorded over these solid weight concentrations varied between 0.42-0.97 PaS by using the natural additive. The rheological behavior of CWS was compared with commercial additives with a possibility to replace it with the natural additive. The static stability studies on CWS of the low- and medium-ash coal water slurries were found to be 27 and 21 days, respectively.

01 COAL, LIGNITE, AND PEAT↗

Does the presence of pseudovitrinite indicate gas-saturated coals? Some interesting observations from the Gething coals in Canada

The presence of pseudovitrinite at a depth of 1,000 m in the very gassy (up to 862 scf/ton total gas content, as-received basis) but low absolute permeability (0.5 mD), low-volatile bituminous Gething coals in the Canadian Foothills has been documented. Because oxidation is unlikely to occur at such depth, it is reasonable to expect that pseudovitrinite formed as a result of desiccation in a gas-saturated environment prior to the coals being uplifted to their present day depth. This raises the possibility that a coal that contains pseudovitrinite may have moisture content that is below its equilibrium moisture, which leads to higher methane adsorptive capacity compared with the same coal that has normal vitrinite (collotelinite). The presence of inertinite macerals in the coal, derived from wood fibers and charred remnants, has aided in the development and preservation of phyteral porosity and in the formation of interconnected microcavities, which should result in higher micropermeability and aid the flow of gas locally within the coal seam and surrounding strata. The Gething coals in the Highhat corehole share some of these characteristics, which may have important implications on the dynamics of coal-bed methane production. Volumetric strain (matrix shrinkage) of these gassy coals during production is conservatively estimated to be 0.5-0.75%, which may result in an absolute permeability increase of between 5 to 12 times, based on studies on coals of similar rank and gas content in United States basins. Although observations made in this preliminary study do not constitute a proof, they leave open the possibility of using pseudovitrinite, under certain circumstances, as an indicator of improved gas sorptive capacity and enhanced permeability in deep coals.

01 COAL, LIGNITE, AND PEAT↗

Characterization of a Middle Distillate Oil from a Coal hydroliquefaction Plant

In this article, a middle distillate oil obtained from a coal hydroliquefaction pilot plant was characterized by modern analytical instruments. First, using {sup 1}H and {sup 13}C nuclear magnetic resonance, the distribution of hydrogen and carbon atoms were obtained, and the presence of configurations such as long aliphatic carbon chains, alkyl-substituted aromatic ring, and partially hydrogenated aromatics in the middle distillate oil was found. Then the oil was separated into three fractions: saturates, aromatics, and polars by neutral silica gel liquid chromatography, and the detailed compositions of saturates and aromatics were respectively analyzed by gas chromatography-mass spectrometry. The results show that the aromatics fraction is the most abundant one in this oil, but they are not normal aromatics and mainly consist of dicyclic-, tricyclic-, and tetracyclic-partially hydrogenated aromatics with carbon atom numbers from C10-C21, such as tetralin, alkyl-substituted tetralin, hydrophenanthrene, hydroanthracene, hydropyrene, and so on. Saturates mainly comprise n-C12-C27 alkanes. These results are of significance for the further processing and marketing of this oil.

01 COAL, LIGNITE, AND PEAT↗

Modeling binary CO{sub 2}/CH{sub 4} flow through coal media

CO{sub 2} can be sequestered in coal seams considering the environmental issues. By means of injecting CO{sub 2} into the coal seams, both sequestration of CO{sub 2} and the enhanced recovery of methane inside the coal seam can be realized. One-dimensional simulation regarding the binary CO{sub 2}/CH{sub 4} flow in a coal seam core was studied by using an analytical solution method. The simulation results were compared with experimental data by matching the effluent concentrations of CO{sub 2} and CH{sub 4}. The transport parameters such as longitudinal dispersion coefficient, retardation factor, and distribution coefficient were determined. It was seen that the amount of CO{sub 2} captured inside the coal sample during binary displacement was much lower than the maximum adsorption capacity of the coal at the same pressure. Then the transport behavior of CO{sub 2} and CH{sub 4} inside the coal seam was simulated. The results of analytical solution were in good agreement with the measured ones within the acceptable error range.

01 COAL, LIGNITE, AND PEAT↗

The Influence of Surfactants on the Zeta Potential of Coals

The surface of three different kinds of coal was modified by three surfactants (cationic, anionic, and non-ionic). Changes on coal surface were examined by the zeta potential technique. The influence of the dispersion of pH, concentration of surfactants, and contact time were investigated. The most significant change in zeta potential resulting from adding surfactants was observed in activated coal (hydrophobic surface, largest BET surface area). Adding the cationic surfactant led to an increase of the zeta potential, contrary to measuring done in water. The anionic surfactant decreased the value of the zeta potential; however, this change was not too remarkable. The results proved that even a very low concentration of the cationic surfactant (0.01 mmol/L) causes a remarkable change of the zeta potential. On the other hand, a similar effect was observed until the concentration of the anionic surfactant reached about 10 mmol/L. The mechanism of binding surfactants is not simple, but preferential hydrophobic interactions were discovered.

01 COAL, LIGNITE, AND PEAT↗

CO{sub 2}-gasification reactivity of different carbonaceous materials at elevated temperatures

At the atmospheric pressure and at the temperatures between 1,223 and 1,673 K, the CO{sub 2} gasification reactivity of seven different carbonaceous materials comprising coal tar pitch coke, petroleum coke, natural graphite, carbon black and three coal chars was investigated by using thermogravimetric analysis. Their crystalline structures were analyzed by X-ray diffraction (XRD). It is found that the reactivity of the chars, pitch coke and petroleum coke produced from liquid phase carbonization, is several times poorer than that of the coal chars produced from solid phase carbonization and even lower than that of natural graphite. At the same time, it is obtained that under the condition of the chemical reaction control, the apparent activation energies of the former are in the range of 135.82-174.92 kJ/mol, while those of the latter are between 89.95 kJ/mol and 110.05 kJ/mol. Besides, the reactivity of the sample has a certain correlation with the crystalline structure of the sample, i.e., the larger the fraction of the relatively better crystalline structure is, the poorer the reactivity of the sample is.

01 COAL, LIGNITE, AND PEAT↗

Thermodynamic study on the formation of acetylene during coal pyrolysis in the arc plasma jet

Based on the principle of minimizing the Gibbs free energy, the composition of C-H-O-N-S equilibrium system about acetylene formation during the pyrolysis in arc plasma jet for four kinds of different rank-ordered coals such as Datong, Xianfeng, Yangcheng, and Luan was analyzed and calculated. The results indicated that hydrogen, as the reactive atmosphere, was beneficial to the acetylene formation. The coal ranks and the hydrogen, oxygen, nitrogen, and sulfur in coal all could obviously affect the acetylene yield. The mole fraction of acetylene is the maximum when the ratio value of atom H/C was 2. The content of oxygen was related to the acetylene yield, but it does not compete with CO formation. These agreed with the experimental results, and they could help to select the coal type for the production of acetylene through plasma pyrolysis process.

01 COAL, LIGNITE, AND PEAT↗

Numerical study on convection diffusion for gasification agent in underground coal gasification (UCG). Part II: determination of model parameters and results analysis

The determination methods of the major model parameters are explained in this article, and the upstream weighted multi-cell balance method is adopted to solve the numerical models established. The author also analyzes and discusses the simulated calculation results, which show that, except for very few points in the loosening zone, where the relative calculation error is comparatively high resulting from the low oxygen concentration, the relative calculation error of other points falls between 8% and 19%. Therefore, the calculation value and the experiment value take on a good conformity. The simulated results indicate that the calculation value of the oxygen concentration is a little bit lower than the experiment one. On top of that, with the prolonging of gasification time, in a high temperature zone the change gradient of oxygen concentration for experimental value is bigger than that of the calculation value. The oxygen concentration is in direct proportion to its distance from the flame working face, i.e., the longer its distance is, the higher the oxygen concentration is; otherwise, the lower the oxygen concentration is.

01 COAL, LIGNITE, AND PEAT↗

Effect of microwave radiation on coal flotation

Most low-rank coals are high in moisture and acid functional groups, therefore showing poor floatability. Drying, which removes the water molecules trapped in the pores and adsorbed at the surface of coal, decreases the hydrophilic character and improves the floatability. Microwave heating, whose simplest application is drying, was applied at 0.9 kW power level for 60 sec exposure time in the experiments to decrease the moisture content of coal in order to enhance the hydrophobicity. The flotation tests of microwave-treated coal by using heptanol and octanol lead to a higher flotation yield and ash removal than original coal.

01 COAL, LIGNITE, AND PEAT↗

Chemical exergies of some coals in Turkey

Exergy analysis is a general method for efficiency analysis of systems and processes. The use of the exergy concept and the analysis of ultimate efficiencies of processes is more or less still limited to the academic world. There are several reasons why its industrial use is still limited. To overcome some of the difficulties in industrial applications of energy analysis, it has made use of exergy analysis. The chemical exergy of a substance is the maximum work that can be obtained from it by taking it to chemical equilibrium with the reference environment at a constant temperature and pressure. The first law analysis gives only the quantity of energy, while the second law defines the quality of energy also. The projected increase in coal utilization in power plants makes it desirable to evaluate the energy content of coal both quantitatively and qualitatively. In the present study, the chemical exergies of some coals of good quality in Turkey were calculated with the BASIC program by using second law analysis and the results were given as tabulated.

01 COAL, LIGNITE, AND PEAT↗

Studies on the production of ultra-clean coal by alkali-acid leaching of low-grade coals

The use of low-grade coal in thermal power stations is leading to environmental pollution due to the generation of large amounts of fly ash, bottom ash, and CO{sub 2} besides other pollutants. It is therefore important to clean the coal before using it in thermal power stations, steel plants, or cement industries etc. Physical beneficiation of coal results in only limited cleaning of coal. The increasing environmental pollution problems from the use of coal have led to the development of clean coal technologies. In fact, the clean use of coal requires the cleaning of coal to ultra low ash contents, keeping environmental norms and problems in view and the ever-growing need to increase the efficiency of coal-based power generation. Therefore this requires the adaptation of chemical cleaning techniques for cleaning the coal to obtain ultra clean coal having ultra low ash contents. Presently the reaction conditions for chemical demineralization of low-grade coal using 20% aq NaOH treatment followed by 10% H{sub 2}SO{sub 4} leaching under reflux conditions have been optimized. In order to reduce the concentration of alkali and acid used in this process of chemical demineralization of low-grade coals, stepwise, i.e., three step process of chemical demineralization of coal using 1% or 5% aq NaOH treatment followed by 1% or 5% H{sub 2}SO{sub 4} leaching has been developed, which has shown good results in demineralization of low-grade coals. In order to conserve energy, the alkali-acid leaching of coal was also carried out at room temperature, which gave good results.

01 COAL, LIGNITE, AND PEAT↗