Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERFACE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Induced Ferromagnetism at BiFeO 3 /YBa 2 Cu 3 O 7 Interfaces

We report that transition metal oxides (TMOs) exhibit many emergent phenomena ranging from high-temperature superconductivity and giant magnetoresistance to magnetism and ferroelectricity. In addition, when TMOs are interfaced with each other, new functionalities can arise, which are absent in individual components. Here, we report results from first-principles calculations on the magnetism at the BiFeO 3 /YBa 2 Cu 3 O 7 interfaces. By comparing the total energy for various magnetic spin configurations inside BiFeO 3 , we are able to show that a metallic ferromagnetism is induced near the interface. We further develop an interface exchange-coupling model and place the extracted exchange coupling interaction strengths, from the first-principles calculations, into a resultant generic phase diagram. Our conclusion of interfacial ferromagnetism is confirmed by the presence of a hysteresis loop in field-dependent magnetization data. Lastly, the emergence of interfacial ferromagnetism should have implications to electronic and transport properties.

36 MATERIALS SCIENCE↗

High-temperature molecular beam epitaxial growth of AlGaN/GaN on GaN templates with reduced interface impurity levels

We present combined in situ thermal cleaning and intentional doping strategies near the substrate regrowth interface to produce high-quality AlGaN/GaN high electron mobility transistors on semi-insulating (0001) GaN templates with low interfacial impurity concentrations and low buffer leakage. By exposing the GaN templates to an optimized thermal dissociation step in the plasma-assisted molecular beam epitaxy environment, oxygen, carbon, and, to lesser extent, Si impurities were effectively removed from the regrowth interface under preservation of good interface quality. Residual Si was further compensated by C-doped GaN via CBr{sub 4} to yield highly resistive GaN buffer layers. Improved N-rich growth conditions at high growth temperatures were then utilized for subsequent growth of the AlGaN/GaN device structure, yielding smooth surface morphologies and low residual oxygen concentration with large insensitivity to the (Al+Ga)N flux ratio. Room temperature electron mobilities of the two-dimensional electron gas at the AlGaN/GaN interface exceeded >1750 cm{sup 2}/V s and the dc drain current reached {approx}1.1 A/mm at a +1 V bias, demonstrating the effectiveness of the applied methods.

36 MATERIALS SCIENCE↗

Band alignment at Cu{sub 2}O/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} interface: A combined experimental-theoretical determination

Cu{sub 2}O/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} is a promising heterostructure for the realization of all-oxide spintronics devices, with La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) and Cu{sub 2}O playing the roles of ferromagnet and semiconductor, respectively. Here we use x-ray photoelectron spectroscopy and first principles calculations to determine the valence band offset at the Cu{sub 2}O/LSMO interface. The interface band alignment is typical of a p-type semiconductor/metal contact, with an interface barrier of 0.3-0.5 eV depending on Cu{sub 2}O thickness. The calculated energetics indicates that the prevailing interface is between SrO-terminated LSMO and Cu planes of Cu{sub 2}O.

36 MATERIALS SCIENCE↗

Electrical And Positron Study Of The Interface Of Organic Semiconductor Heterojunction

Single layer of CoPc, F{sub 16}CuPc and heterostructure of CoPc/F{sub 16}CuPc were prepared by thermal evaporation system. Charge transport measurement across the interface shows a two order higher free carrier density than that of the single layer device. This confirms a charge accumulation layer at the interface which may arise due to charge transfer from CoPc layer to F{sub 16}CuPc. Slow positron study also shows a sharp S-parameter profile at the interface which is a convoluted effect of defects arising due to the growth behavior of different type of organic molecules and the intrinsic electric field due to interfacial dipole at the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analytical electron microscopy investigation of elemental composition and bonding structure at the Sb-doped Ni-fully-silicide/SiO{sub 2} interface

It is very important to control the elemental composition and bonding structure at the gate electrode/gate dielectrics interface in metal-oxide-semiconductor transistor devices because this determines the threshold voltage of the gate electrode. In this study, we investigated the structure at the interface between the antimony (Sb)-doped nickel-fully-silicide gate electrode and SiO{sub 2} dielectrics by employing high-spatial resolution techniques such as energy dispersive x-ray spectroscopy and electron energy-loss spectroscopy using a scanning transmission electron microscope. In one region, we found a thin nickel layer at the NiSi/SiO{sub 2} interface originating from the migration of native oxide at the face of the poly-silicon. In another region, a Sb pileup was detected at the NiSi/SiO{sub 2} interface where the Ni L{sub 3}-edge spectrum showed Ni-Sb bonding, then it was suggested that Sb atoms exist at the bottom of NiSi, substituting for Si atoms in NiSi.

36 MATERIALS SCIENCE↗

Ultrasonic characterization of interfaces in composite bonds

The inverse determination of imperfect interfaces from reflection spectra of normal and oblique incident ultrasonic waves in adhesive bonds of multidirectional composites is investigated. The oblique measurements are complicated by the highly dispersed nature of oblique wave spectra at frequencies above 3MHz. Different strategies for bond property reconstruction, including a modulation method, are discussed. The relation of measured interfacial spring density to the physico-chemical model of a composite interface described by polymer molecular bonds to emulate loss of molecular strength on an adhesive composite interface is discussed. This potentially relates the interfacial (adhesion) strength (number of bonds at the adhesive substrate interface) to the spring constant (stiffness) area density (flux), which is an ultrasonically measurable parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray reflectance studies of interface in ion beam sputtered CoFeB/MgO bilayers

This letter reports specular and diffuse x-ray reflectance studies of the interface in the ion beam sputtered CoFeB({approx}5-8 nm)/MgO({approx}2-5 nm) bilayers. The study reveals the specific roles of oxygen ion energy, substrate temperature, and reactive gas ambient on controlling the interface width in the bilayers. Depending on oxidation-method employed for MgO growth the interface width varies between 0.51 and 0.20 nm. Energy of assist ions ({<=}50 eV) plays a key role compared to the growth temperature in determining the sharpness of the interface. The bottom grown CoFeB exhibited significant increase in coercivity (H{sub C}), which also depends on MgO-growth process.

36 MATERIALS SCIENCE↗

The effect of MgO(111) interlayer on the interface phase stability and structure of BaFe{sub 12}O{sub 19}/SiC(0001)

We present a study on the effect of an interlayer of thin MgO(111) film on SiC(0001) on the interface phase stability and structure of the BaFe{sub 12}O{sub 19} (BaM). The 10 nm MgO(111) interlayer followed by the BaM film were grown by molecular beam epitaxy on 6H-SiC. Cross-sectional transmission electron microscopy shows the formation of a magnesium ferrite spinel phase at the interface, and after 25 nm, a well structured BaM film was observed. In addition to the two main phases (Mg-ferrite and BaM), a thin layer of SiOx (2-3 nm) is formed at the SiC interface. In spite of the formation of this amorphous layer, the diffraction studies show that the BaM film is epitaxially grown and it has a single crystal structure. The energy dispersive x-ray analysis from the interface region shows that the MgO layer prevents significant outdiffusion of the Si into the film. Total energy calculations by density functional theory were used to investigate the stability of the various phases and to explain the observed interfacial phases in the studied system.

36 MATERIALS SCIENCE↗

Interface roughness induced asymmetric magnetic property in sputter-deposited Co/CoO/Co exchange coupled trilayers

The effect of interface roughness on magnetic properties of exchange coupled polycrystalline Co/CoO(t{sub AF})/Co trilayers has been investigated by varying antiferromagnetic layer (CoO) thickness. It has been found that the upper CoO/Co interface becomes rougher with increasing CoO layer thickness, resulting in stronger exchange bias of the upper interface than the lower one. The interfacial exchange coupling is strengthened by the increase of defect-generated uncompensated antiferromagnetic spins; such spins form coupling with spins in the Co layer at the interface. As a result, the CoO layer thickness dependence of exchange bias is much enhanced for the upper Co layer. The transition from anisotropic magnetoresistance to isotropic magnetoresistance for the top Co layer has also been found. This could be attributed to the defects, probably partial thin oxide layers, between Co grains in the top Co layer that leads a switch from spin-orbit scattering related magnetoresistance to spin-dependent electron scattering dominated magnetoresistance.

36 MATERIALS SCIENCE↗

Tailoring interfacial exchange coupling with low-energy ion beam bombardment: Tuning the interface roughness

By ascertaining NiO surface roughness in a Ni{sub 80}Fe{sub 20}/NiO film system, we were able to correlate the effects of altered interface roughness from low-energy ion-beam bombardment of the NiO layer and the different thermal instabilities in the NiO nanocrystallites. From experiment and by modelling the temperature dependence of the exchange bias field and coercivity, we have found that reducing the interface roughness and changing the interface texture from an irregular to striped conformation enhanced the exchange coupling strength. Our results were in good agreement with recent simulations using the domain state model that incorporated interface mixing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma plume effects on the conductivity of amorphous-LaAlO{sub 3}/SrTiO{sub 3} interfaces grown by pulsed laser deposition in O{sub 2} and Ar

Amorphous-LaAlO{sub 3}/SrTiO{sub 3} interfaces exhibit metallic conductivity similar to those found for the extensively studied crystalline-LaAlO{sub 3}/SrTiO{sub 3} interfaces. Here, we investigate the conductivity of the amorphous-LaAlO{sub 3}/SrTiO{sub 3} interfaces grown in different pressures of O{sub 2} and Ar background gases. During the deposition, the LaAlO{sub 3} ablation plume is also studied, in situ, by fast photography and space-resolved optical emission spectroscopy. An interesting correlation between interfacial conductivity and kinetic energy of the Al atoms in the plume is observed: to assure conducting interfaces of amorphous-LaAlO{sub 3}/SrTiO{sub 3}, the kinetic energy of Al should be higher than 1 eV. Our findings add further insights on mechanisms leading to interfacial conductivity in SrTiO{sub 3}-based oxide heterostructures.

36 MATERIALS SCIENCE↗

Enhanced thermal conductivity of polycrystalline aluminum nitride thin films by optimizing the interface structure

The growth-temperature dependency and interface structure effects on the thermal conductivity of the highly textured AlN thin films on (001) Si substrates were systematically studied by characterizing the crystal structures, surface morphologies, interface structures, chemical compositions, and thermal conductivity using x-ray diffraction analysis, atomic force microscopy, high resolution transmission electron microscopy, x-ray photoelectron spectroscopy, and 3-omega method, respectively. By optimizing the interface microstructure and the growth temperature, thermal conductivity of polycrystalline AlN thin films can be greatly enhanced from 9.9 to 26.7 W/mK, when the growth temperature increases from 330 to 560 Degree-Sign C. This achievement is considered to be associated with the diminishment of the amorphous and disordered layer at the AlN/Si interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase constitution and interface structure of nano-sized Ag-Cu/AlN multilayers: Experiment and ab initio modeling

Nano-sized Ag-Cu{sub 8nm}/AlN{sub 10nm} multilayers were deposited by reactive DC sputtering on {alpha}-Al{sub 2}O{sub 3}(0001) substrates. Investigation of the phase constitution and interface structure of the multilayers evidences a phase separation of the alloy sublayers into nanosized grains of Ag and Cu. The interfaces between the Ag grains and the quasi-single-crystalline AlN sublayers are semi-coherent, whereas the corresponding Cu/AlN interfaces are incoherent. The orientation relationship between Ag and AlN is constant throughout the entire multilayer stack. These observations are consistent with atomistic models of the interfaces as obtained by ab initio calculations.

36 MATERIALS SCIENCE↗

Non-conducting interfaces of LaAlO{sub 3}/SrTiO{sub 3} produced in sputter deposition: The role of stoichiometry

We have investigated the properties of interfaces between LaAlO{sub 3} films grown on SrTiO{sub 3} substrates singly terminated by TiO{sub 2}. We used RF sputtering in a high-pressure oxygen atmosphere. The films are smooth, with flat surfaces. Transmission electron microscopy shows sharp and continuous interfaces with some slight intermixing. The elemental ratio of La to Al, measured by the energy dispersive X-ray technique, is found to be 1.07. Importantly, we find these interfaces to be non-conducting, indicating that the sputtered interface is not electronically reconstructed in the way reported for films grown by pulsed laser deposition because of the different interplays among stoichiometry, mixing, and oxygen vacancies.

36 MATERIALS SCIENCE↗

Observation of two-dimensional p-type dopant diffusion across a p{sup +}-InP/n{sup -}-InGaAs interface using scanning electron microscopy

Scanning electron microscopy (SEM) with potential calculations has been shown to be effective for the detection of p-type dopant diffusion, even across a Zn doped p{sup +}-InP/non-doped n{sup -}-InGaAs/n{sup +}-InP heterojunction. Heterojunction samples were observed using SEM and the electrostatic potential was calculated from Zn concentration profiles obtained by secondary ion mass spectrometry. The sensitivity of SEM for the potential was derived from the SEM observations and potential calculation results. The results were then used to investigate the dependence of the SEM contrast on the Zn diffusion length across the p{sup +}-InP/non-doped n{sup -}-InGaAs interface. Accurate dopant mapping was difficult when the Zn diffusion length was shorter than 30 nm, because the heterojunction affects the potential at the interface. However, accurate dopant mapping was possible when the Zn diffusion length was longer than 30 nm, because the factor dominating the potential variation was not the heterojunction, but rather Zn diffusion 30 nm distant from the interface. Thus, Zn diffusion further than 30 nm from a Zn-doped p{sup +}-InP/non-doped n{sup -}-InGaAs interface can be effectively detected by secondary electron (SE) imaging. SE imaging with potential calculations can be widely used for accurate dopant mapping, even at heterojunctions, and is, therefore, expected to be of significant assistance to the compound semiconductor industry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-scale chemical quantification of oxide interfaces using energy-dispersive X-ray spectroscopy

Atomic-scale quantification of chemical composition across oxide interfaces is important for understanding physical properties of epitaxial oxide nanostructures. Energy-dispersive X-ray spectroscopy (EDS) in an aberration-corrected scanning transmission electron microscope was used to quantify chemical composition across the interface of ferromagnetic La{sub 0.7}Sr{sub 0.3}MnO{sub 3} and antiferromagnetic BiFeO{sub 3} quantum structure. This research demonstrates that chemical composition at atomic columns can be quantified by Gaussian peak-fitting of EDS compositional profiles across the interface. Cation diffusion was observed at both A- and B-sublattice sites; and asymmetric chemical profiles exist across the interface, consistent with the previous studies.

36 MATERIALS SCIENCE↗

The silicon/zinc oxide interface in amorphous silicon-based thin-film solar cells: Understanding an empirically optimized contact

The electronic structure of the interface between the boron-doped oxygenated amorphous silicon 'window layer' (a-SiO{sub x}:H(B)) and aluminum-doped zinc oxide (ZnO:Al) was investigated using hard x-ray photoelectron spectroscopy and compared to that of the boron-doped microcrystalline silicon ({mu}c-Si:H(B))/ZnO:Al interface. The corresponding valence band offsets have been determined to be (-2.87 {+-} 0.27) eV and (-3.37 {+-} 0.27) eV, respectively. A lower tunnel junction barrier height at the {mu}c-Si:H(B)/ZnO:Al interface compared to that at the a-SiO{sub x}:H(B)/ZnO:Al interface is found and linked to the higher device performances in cells where a {mu}c-Si:H(B) buffer between the a-Si:H p-i-n absorber stack and the ZnO:Al contact is employed.

36 MATERIALS SCIENCE↗

Understanding of interface structures and reaction mechanisms induced by Ge or GeO diffusion in Al{sub 2}O{sub 3}/Ge structure

The reaction mechanisms at Al{sub 2}O{sub 3}/Ge interfaces with thermal oxidation through the Al{sub 2}O{sub 3} layer have been investigated. X-ray photoelectron spectroscopy reveals that an Al{sub 6}Ge{sub 2}O{sub 13} layer is formed near the interface, and a GeO{sub 2} layer is formed on the Al{sub 2}O{sub 3} surface, suggesting Ge or GeO diffusion from the Ge surface. It is also clarified that the Al{sub 6}Ge{sub 2}O{sub 13} layer is formed by the different mechanism with a small activation energy of 0.2 eV, compared with the GeO{sub 2} formation limited by oxygen diffusion. Formation of Al-O-Ge bonds due to the AlGeO formation could lead appropriate interface structures with high interface qualities.

36 MATERIALS SCIENCE↗