Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Study of the dielectric properties in the NaNbO{sub 3} -KNbO{sub 3}-In{sub 2}O{sub 3} system using AC impedance spectroscopy

We report a comparative study of the dielectric properties of solid-state (ceramic method) synthesized NaNbO{sub 3} (NN), Na{sub 0.75}K{sub 0.25}NbO{sub 3} (K25NN), K{sub 0.5}Na{sub 0.5}NbO{sub 3} (KNN) and some composite materials containing In{sub 2}O{sub 3} and NN or KNN using an AC impedance method. Powder X-ray diffraction (PXRD) was employed to investigate the phase purity. No significant amount of impurity phase was observed for NN, K25NN, and KNN. Substitutions of 10, 15 and 25 mol% In{sup 3+} for Nb{sup 5+} in KNN and NN using solid-state reactions at 1150 deg. C resulted in composite materials. AC impedance studies of NN, KNN and K25NN in the temperature range of 500-800 deg. C showed a single semicircle (attributed to the bulk property) in the high-frequency range of 10{sup 3} to 10{sup 6} Hz. The individual contributions from the bulk and grain boundary on the dielectric properties were resolved and quantified from the impedance data. The calculated dielectric values for NN were consistent with previously reported in the literature. 10% Indium based KNN composite materials had the lowest dielectric loss 0.585 and the dielectric constant of 233 at 100 kHz at the temperature of 650 deg. C.

36 MATERIALS SCIENCE↗

Preparation of In{sub 2}O{sub 3} octahedrons by heating InCl{sub 3} aqueous solution on the Si substrate

In{sub 2}O{sub 3} octahedrons have been synthesized by heating InCl{sub 3} aqueous solution on the Si substrate at 400-900 deg. C for 2 h. The average size of In{sub 2}O{sub 3} octahedrons is decreased by increasing the heating temperature. The In{sub 2}O{sub 3} octahedrons are single-crystalline with the body-centered cubic structure and have controllable sizes in the range of 0.7-1.0 {mu}m. A possible mechanism was also proposed to account for the formation of In{sub 2}O{sub 3} octahedrons. A strong photoluminescence with a peak at 458 nm was observed from the In{sub 2}O{sub 3} octahedrons at room temperature. This emission can be attributed to oxygen vacancies and indium-oxygen vacancy centers.

36 MATERIALS SCIENCE↗

Ternary CuInS{sub 2} photoelectrodes created using the sulfurization of Cu–In metal precursors for photoelectrochemical applications

Graphical abstract: At an irradiation of 100 mW/cm{sup 2} from a Xe lamp, the highest photo-enhancement current density of sample (f) obtained in this study was 5.81 mA/cm{sup 2} at an external potential of +0.4 V vs. an Ag/AgCl electrode in Na{sub 2}S (0.35 M) + K{sub 2}SO{sub 3} (0.25 M) solution. These results show that the physical properties of CuInS{sub 2} can be controlled by changing the [In]/[In + Cu] molar ratio in the metal precursors using the reactive sulfurization process with the sputtering of Cu–In metal precursors. - Highlights: • CuInS{sub 2} is deposited on substrates using sulfurization of Cu–In precursors. • Samples with [In]/[Cu + In] ratio of below 0.49 are p-type semiconductors. • Samples with [In]/[Cu + In] ratio of above 0.51 are n-type semiconductors. • Sample with [In]/[Cu + In] ratio of 0.53 has a maximum PEC response. - Abstract: Copper indium disulfide semiconductor layers are deposited onto glass substrates or fluorine-doped tin oxide-coated glass substrates with the reactive sulfurization and the sputtering of Cu–In metal precursors. X-ray diffraction patterns and energy dispersive analysis of X-ray results reveal that the samples change from the Cu-rich tetragonal CuInS{sub 2} to the In-rich CuInS{sub 2} phase with an increase in the [In]/[In + Cu] molar ratio in the metal precursors. The thicknesses and direct band gaps of the samples, determined from surface profile measurements and transmittance and reflectance spectra, are in the ranges of 0.82–1.29 μm and 1.39–1.53 eV, respectively. The carrier density and mobility of samples are in the ranges of 3.29 × 10{sup 14}–1.9 × 10{sup 20} cm{sup −3} and 0.58–17.41 cm{sup 2}/V s, respectively. A sample with an [In]/[In + Cu] molar ratio of 0.53 has a maximum photo enhancement current density of 5.81 mA/cm{sup 2} at an applied bias of 0.4 V vs. an Ag/AgCl electrode in aqueous Na{sub 2}S (0.35 M) + K{sub 2}SO{sub 3} (0.25 M) solution.

36 MATERIALS SCIENCE↗

A comprehensive diagram to grow InAlN alloys by plasma-assisted molecular beam epitaxy

Indium incorporation and surface morphology of InAlN layers grown on (0001) GaN by plasma-assisted molecular beam epitaxy were investigated as a function of the impinging In flux and the substrate temperature in the 450-610 deg. C range. In incorporation was found to decrease with substrate temperature due to thermal decomposition of the growing layer, while for a given temperature it increased with the impinging In flux until stoichiometry was reached at the growth front. The InN losses during growth followed an Arrhenius behavior characterized by an activation energy of 2.0 eV. A growth diagram highly instrumental to identify optimum growth conditions was established.

36 MATERIALS SCIENCE↗

Energy losing rate and open-circuit voltage analysis of organic solar cells based on detailed photocurrent simulation

The J-V characteristics and photovoltaic response of indium tin oxide/pentacene (d nm)/C{sub 60} (40 nm)/BCP (10 nm)/Ag (100 nm) devices have been systematically analyzed. By fitting the J-V characteristics of the fabricated devices, photocurrent densities J{sub ph} were obtained. Meanwhile, we proposed a modified optical transfer matrix theory to satisfy the reasonable trend between P{sub 0}R{sub 0} and film thickness of pentacene layers. Then, we revealed that an accurate rate of energy loss can be defined as E{sub loss}=1-betaJ{sub e}/P{sub 0}R{sub 0}. Also, the relationship between open-circuit voltage V{sub OC}, compensation voltage V{sub 0} and initial polaron-pair bounding energy E{sub B} was determined based on the detailed study and simulation of device photocurrent.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Strain-induced microstructural evolution in epitaxial Fe/MgO layers grown on In{sub x}Ga{sub 1-x}As(001) substrates

Epitaxial Fe/MgO layers have been grown on In{sub x}Ga{sub 1-x}As substrates to examine the epitaxial relationship and the morphological variation with respect to indium content, x and the growth temperature of MgO interlayer. The in-plane epitaxial relationship of Fe[010]//MgO[110]//In{sub x}Ga{sub 1-x}As[110] is found in the structures of all x values for 4 nm thick MgO layers grown at room temperature. Epitaxial MgO interlayers grow in two-dimensional layer regardless of x while the morphology of subsequent Fe changes from two-dimensional layer to three-dimensional islands with the increase of x. Furthermore, the average size of Fe islands becomes smaller at higher x value due to enhanced underlying strain. The elevated growth temperature of MgO has led to partial strain relaxation, resulting in the suppression of three-dimensional Fe island formation.

36 MATERIALS SCIENCE↗

Ultrathin film, high specific power InP solar cells on flexible plastic substrates

We demonstrate ultrathin-film, single-crystal InP Schottky-type solar cells mounted on flexible plastic substrates. The lightly p-doped InP cell is grown epitaxially on an InP substrate via gas source molecular beam epitaxy. The InP substrate is removed via selective chemical wet-etching after the epitaxial layers are cold-welded to a 25 {mu}m thick Kapton sheet, followed by the deposition of an indium tin oxide top contact that forms the Schottky barrier with InP. The power conversion efficiency under 1 sun is 10.2{+-}1.0%, and its specific power is 2.0{+-}0.2 kW/kg. The ultrathin-film solar cells can tolerate both tensile and compressive stress by bending over a <1 cm radius without damage.

36 MATERIALS SCIENCE↗

Kinetics of Ge-Se-In Film Growth

The processes of vacuum evaporation and condensation in the Ge-Se-In system were investigated. Thin amorphous films were deposited by modified thermal evaporation from previously synthesized non-crystalline (GeSe{sub y}){sub 1-x}In{sub x} ingots, where x = 0, 5, 10, 15, 20 and y = 4, 5 and 6. The specific evaporation rate was determined by measuring of the mass of evaporator before evaporation and the mass of empty evaporator after evaporation in temperature range of evaporation (500-800) K. The substrate temperature was varied in the range (300-430) K to study the condensation process and specific condensation rate was determined by measuring of the substrate mass before and after condensation. The condensation energy of the (GeSe{sub y}){sub 1-x}In{sub x} layers steady increases at indium addition.The thin films studied by transmission electron microscopy (TEM) and electron microdiffraction (EMD) reveal homogeneous and amorphous structure. The layer composition determined by Auger electron spectroscopy is close to that of the corresponded bulk samples.

36 MATERIALS SCIENCE↗

Conduction noise absorption by ITO thin films attached to microstrip line utilizing Ohmic loss

For the aim of wide-band noise absorbers with a special design for low frequency performance, this study proposes conductive indium-tin oxide (ITO) thin films as the absorbent materials in microstrip line. ITO thin films were deposited on the polyimide film substrates by rf magnetron cosputtering of In{sub 2}O{sub 3} and Sn targets. The deposited ITO films show a typical value of electrical resistivity ({approx}10{sup -4} {Omega} m) and sheet resistance can be controlled in the range of 20-230 {Omega} by variation in film thickness. Microstrip line with characteristic impedance of 50 {Omega} was used for determining their noise absorbing properties. It is found that there is an optimum sheet resistance of ITO films for the maximum power absorption. Reflection parameter (S{sub 11}) is increased with decrease in sheet resistance due to impedance mismatch. On the while, transmission parameter (S{sub 21}) is decreased with decrease in sheet resistance due to larger Ohmic loss of the ITO films. Experimental results and computational prediction show that the optimum sheet resistance is about 100 {Omega}. For this film, greater power absorption is predicted in the lower frequency region than ferrite thin films of high magnetic loss, which indicates that Ohmic loss is the predominant loss parameter for power absorption in the low frequency range.

36 MATERIALS SCIENCE↗

Multiple growths of epitaxial lift-off solar cells from a single InP substrate

We demonstrate multiple growths of flexible, thin-film indium tin oxide-InP Schottky-barrier solar cells on a single InP wafer via epitaxial lift-off (ELO). Layers that protect the InP parent wafer surface during the ELO process are subsequently removed by selective wet-chemical etching, with the active solar cell layers transferred to a thin, flexible plastic host substrate by cold welding at room temperature. The first- and second-growth solar cells exhibit no performance degradation under simulated Atmospheric Mass 1.5 Global (AM 1.5G) illumination, and have a power conversion efficiency of {eta}{sub p}=14.4{+-}0.4% and {eta}{sub p}=14.8{+-}0.2%, respectively. The current-voltage characteristics for the solar cells and atomic force microscope images of the substrate indicate that the parent wafer is undamaged, and is suitable for reuse after ELO and the protection-layer removal processes. X-ray photoelectron spectroscopy, reflection high-energy electron diffraction observation, and three-dimensional surface profiling show a surface that is comparable or improved to the original epiready wafer following ELO. Wafer reuse over multiple cycles suggests that high-efficiency; single-crystal thin-film solar cells may provide a practical path to low-cost solar-to-electrical energy conversion.

36 MATERIALS SCIENCE↗

Absence of vapor-liquid-solid growth during molecular beam epitaxy of self-induced InAs nanowires on Si

The growth mechanism of self-induced InAs nanowires (NWs) grown on Si (111) by molecular beam epitaxy was investigated by in situ reflection high energy electron diffraction and ex situ scanning and transmission electron microscopy. Abrupt morphology transition and in-plane strain relaxation revealed that InAs NWs nucleate without any significant delay and under the absence of indium (In) droplets. These findings are independent of the As/In-flux ratio, revealing entirely linear vertical growth rate and nontapered NWs. No evidence of In droplets nor associated change in the NW apex morphology was observed for various growth termination procedures. These results highlight the absence of vapor-liquid-solid growth, providing substantial benefits for realization of atomically abrupt doping and composition profiles in future axial InAs-based NW heterostructures on Si.

36 MATERIALS SCIENCE↗

Growth of TiO{sub 2} Thin Film on Various Substrates using RF Magnetron Sputtering

The conductivity of Titanium Dioxide (TiO{sub 2}) thin film fabricated using Radio Frequency (RF) Magnetron Sputtering on Silicon (Si), Indium doped--Tin Oxide (ITO) and microscope glass (M) substrates is presented in this paper. The dependant of thin film thickness and type of substrate been discussed. TiO{sub 2} was deposited using Ti target in Ar+O{sub 2}(45:10) mixture at 250 W for 45, 60, 75, 90, 105 and 120 minute. Resultant thickness varies from 295 nm to 724 nm with deposition rate 6.4 nm/min. On the other hand, resistivity, Rs value for ITO substrate is between 5.72x10{sup -7} to 1.54x10{sup -6{Omega}}.m, Si substrate range is between 3.52x10{sup -6} to 1.76x10{sup -5{Omega}}.m and M substrate range is between 99 to 332 {Omega}.m. The value of resistivity increases with the thickness of the thin film.

36 MATERIALS SCIENCE↗

Transport and strain relaxation in wurtzite InAs-GaAs core-shell heterowires

Indium-arsenide-gallium-arsenide (InAs-GaAs) core-shell, wurtzite nanowires have been grown on GaAs (001) substrates. The core-shell geometries (core radii 11 to 26 nm, shell thickness >2.5 nm) exceeded equilibrium critical values for strain relaxation via dislocations, apparent from transmission electron microscopy. Partial axial relaxation is detected in all nanowires increasing exponentially with size, while radial strain relaxation is >90%, but undetected in nanowires with both smaller core radii <16 nm and shell thicknesses <5 nm. Electrical measurements on individual core-shell nanowires show that the resulting dislocations are correlated with reduced electron field-effect mobility compared to bare InAs nanowires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detection of metallic In nanoparticles in InGaN alloys

We report on detection of metallic indium nanoparticles in the In{sub x}Ga{sub 1-x}N alloys grown by plasma-assisted molecular beam epitaxy at x exceeding 0.38 {+-} 0.03, using Hall effect measurements in a wide magnetic field range (up to 30 T). Observation of the abnormally increasing magnetic field dependences of the absolute value of Hall coefficient, approximated in the frames of the model taking into account influence of the highly conductive inclusions, was employed as a reliable criterion of presence of the In nanoparticles in the studied layers. The onset of In inclusions is governed by x rather than growth stoichiometric conditions.

36 MATERIALS SCIENCE↗

Photoluminescence Study of Interdot Carrier Transfer on Strain-relaxed InAs Quantum Dots

Photoluminescence (PL) properties of the strain relaxed InAs quantum dots (QDs) are studied as a function of temperature from 10 to 300 K. Two groups of QDs induced by strain relaxation are observed in the PL spectra. The PL peak position of the relaxed (non-relaxed) QDs locates at a higher (lower) energy. TEM image prove QDs are distributed into two groups and indicate the QDs relax the strain by diffusing indium to GaAs. In the 120-200 K temperature range, there are abnormal temperature behaviors attributed to the carrier transfer from the relaxed to non-relaxed QDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface and interfacial reaction study of InAs(100)-crystalline oxide interface

A crystalline oxide film on InAs(100) is investigated with in situ monochromatic x-ray photoelectron spectroscopy and low energy electron diffraction before and after in situ deposition of Al{sub 2}O{sub 3} by atomic layer deposition (ALD) as well as upon air exposure. The oxidation process leads to arsenic and indium trivalent oxidation state formation. The grown epitaxial oxide-InAs interface is stable upon ALD reactor exposure; however, trimethyl aluminum decreases oxidation states resulting in an unreconstructed surface. An increase in oxide concentration is also observed upon air exposure suggesting the crystalline oxide surface is unstable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure, morphology and emission polarization of enhanced symmetry InAs quantum-dot-like structures grown on InP substrates by molecular beam epitaxy

The optical and structural properties of a new kind of InAs/InGaAlAs/InP quantum dot (QD)-like objects grown by molecular beam epitaxy have been investigated. These nanostructures were found to have significantly more symmetrical shapes compared to the commonly obtained dash-like geometries typical of this material system. The enhanced symmetry has been achieved due to the use of an As{sub 2} source and the consequent shorter migration length of the indium atoms. Structural studies based on a combination of scanning transmission electron microscopy (STEM) and atom probe tomography (APT) provided detailed information on both the structure and composition distribution within an individual nanostructure. However, it was not possible to determine the lateral aspect ratio from STEM or APT. To verify the in-plane geometry, electronic structure calculations, including the energy levels and transition oscillator strength for the QDs have been performed using an eight-band k·p model and realistic system parameters. The results of calculations were compared to measured polarization-resolved photoluminescence data. On the basis of measured degree of linear polarization of the surface emission, the in-plane shape of the QDs has been assessed proving a substantial increase in lateral symmetry. This results in quantum-dot rather than quantum-dash like properties, consistent with expectations based on the growth conditions and the structural data.

36 MATERIALS SCIENCE↗

Transmission electron microscopy assisted in-situ joule heat dissipation study of individual InAs nanowires

Managing heat transport at nanoscale is an important and challenging task for nanodevice applications and nanostructure engineering. Herein, through in-situ engineering nanowire (NW)-electrode contacts with electron beam induced carbon deposition in a transmission electron microscope, Joule heat dissipation along individual suspended Indium Arsenide NWs is well managed to obtain pre-designed temperature profiles along NWs. The temperature profiles are experimentally determined by the breakdown site of NWs under Joule heating and breakdown temperature measurement. A model with NW-electrode contacts being well considered is proposed to describe heat transport along a NW. By fitting temperature profiles with the model, thermal conductance at NW-electrode contacts is obtained. It is found that, the temperature profile along a specific NW is mainly governed by the relative thermal conductance at the two NW-electrode contacts, which is engineered in experiments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗