Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heterogeneous materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of surface acidity modulation on Pt/Al 2 O 3 single atom catalyst for carbon monoxide oxidation and methanol decomposition

With ideal metal utilization efficiency and homogeneous active sites, single atom catalysts (SACs) have attracted extensive attention in heterogeneous catalysis field. The performance of SACs is highly dependent on the local coordination environment of metal single atoms. However, few works reported the effect of surface acidity modification on the performance of SACs such as Pt SACs which have been widely studied nowadays. In this work, a Pt/Al 2 O 3 SAC has been successfully prepared using a bayerite Al(OH) 3 as support through simple IWI method for Pt loading. Through post-modification of Pt/Al 2 O 3 with acidic WO 3 and basic MgO, the surface acidity of Pt/Al 2 O 3 was tuned. Here, activity of CO oxidation and methanol decomposition on the modified catalysts has been evaluated. It was found that the catalytic performance was highly related to the surface acidity of Pt SACs. Basic MgO modified Pt/Al 2 O 3 performed better in CO oxidation under the reaction condition with H 2 O. Acidic WO 3 modified Pt/Al 2 O 3 showed superior activity in methanol decomposition. Detailed characterization and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) study suggested that the positive H 2 O effect on CO oxidation was due to the mitigated formation of bicarbonate species on Pt/Al 2 O 3 and WO 3 /Pt/Al 2 O 3 catalysts and the promoted desorption of carbonate species from MgO/Pt/Al 2 O 3 . The superior methanol decomposition performance on WO 3 /Pt/Al 2 O 3 was owing to its abundant oxygen vacancies and high resistance to carbonate accumulation. This study highlights the importance of surface acidity modulation of Pt SACs in heterogeneous catalysis and suggests that fine-tuning the surface acidity can be an effective strategy in new SACs development.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multiscale Concurrent Atomistic-Continuum (CAC) modeling of multicomponent alloys

We report strengthening in complex multicomponent systems such as solid solution alloys is controlled primarily by the dynamic interactions between dislocation lines and heterogeneously distributed solute species. Modeling of extended defect length scales in such multicomponent systems becomes prohibitively expensive, motivating the development of reduced order approaches. This work explores the application of the Concurrent Atomistic-Continuum (CAC) method to model dislocation mobility in random alloys at extended length scales. By employing recently developed average-atom interatomic potentials, the average “bulk” material response in coarse-grained regions interacts with true random solute species in the atomistic-scale domain. We demonstrate that spurious stresses in domain resolution transition regions are eliminated entirely due to the CAC formulation. Simultaneously, the key details of local stress fluctuation due to randomness in the dislocation core region are captured, and fluctuating stress smoothly decays to the long-range dislocation stress field response. Dislocation mobility calculations, for line lengths over 400 nm, are computed as a function of alloy composition in the model FeNiCr system and compared to full molecular dynamics (MD). The results capture the composition-dependent trends, while reducing degrees of freedom by nearly 40%. This approach can be readily extended to any system described by an EAM potential and facilitates the study of large-scale defect dynamics in complex solute environments to support computational alloy design.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Best practices in catalysis: A perspective

Catalysis, from its roots in petrochemical refining and conversion, has emerged as a transdisciplinary field that now encompasses synthesis of materials and molecules that enable applications in energy conversion and storage, environmental remediation, medicine, plastics, and fertilizer production, among numerous others. A handful of disciplines can claim relevance and success over such an extended period of time and continue to claim a preeminent role in defining the state-of-the-art in science and technology. Syncretic and rapid advancements in formulation and spectroscopic characterization of materials and molecules useful as catalysts, high-level density functional and molecular orbital theory calculations, and a strong foundation in concepts of physical chemistry, thermodynamics, and chemical kinetics offer new and abundant opportunities at the present day for addressing the grand challenge of controlling chemical transformations using catalysis. Here, we examine what we have learned of concepts that underpin heterogeneous catalysis but more importantly, how we learned to archive our knowledge in context of a set of best practices and standards that have emerged in the course of our learnings—ones we seek to highlight herein. Our perspective emphasizes concepts in synthesis, characterization, kinetics, and theory, because these four elements combined enable description of molecular acts that happen on surfaces and how fast they occur. In revisiting best practices in heterogeneous catalysis in these sub-fields and in authorship and peer review we aspire to augment clarity, reproducibility, and rigor in the science and practice of catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Conversion of Polyolefin Waste to Liquid Alkanes with Ru-Based Catalysts under Mild Conditions

Chemical upcycling of waste polyolefins via hydrogenolysis offers unique opportunities for selective depolymerization compared to high temperature thermal deconstruction. Here, we demonstrate the hydrogenolysis of polyethylene into liquid alkanes under mild conditions using ruthenium nanoparticles supported on carbon (Ru/C). Reactivity studies on a model noctadecane substrate showed that Ru/C catalysts are highly active and selective for the hydrogenolysis of C(sp 3 )–C(sp 3 ) bonds at temperatures ranging from 200 to 250 °C. Under optimal conditions of 200 °C in 20 bar H 2 , polyethylene (average M w ~ 4000 Da) was converted into liquid n-alkanes with yields of up to 45% by mass after 16 h using a 5 wt % Ru/C catalyst with the remaining products comprising light alkane gases (C 1 –C 6 ). At 250 °C, nearly stoichiometric yields of CH 4 were obtained from polyethylene over the catalyst. The hydrogenolysis of long chain, low-density polyethylene (LDPE) and a postconsumer LDPE plastic bottle to produce C 7 –C 45 alkanes was also achieved over Ru/C, demonstrating the feasibility of this reaction for the valorization of realistic postconsumer plastic waste. By identifying Ru-based catalysts as a class of active materials for the hydrogenolysis of polyethylene, this study elucidates promising avenues for the valorization of plastic waste under mild conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

An assessment of spall failure modes in laser powder bed fusion fabricated stainless steel 316L with low-volume intentional porosity

Here, this paper reports on spall failure and damage modes in Laser Powder Bed Fusion fabricated Stainless Steel 316L (SS316L) with intentional levels of low-volume (1–5 vol. %) porosity and pore sizes of 200, 350, and 500 μm. The fabricated specimens were subjected to uniaxial-strain plate-impact loading at ~4.5 GPa, to initiate incipient spall failure. Analysis of velocimetry profiles measured using multi-probe photon-Doppler velocimetry coupled with post-mortem analysis of soft-recovered samples reveals local suppression of spall failure (termed as spall-dominated) as a function of porosity, as the failure mechanism transitions from spall-centered tensile stress dominated to a pore-centered microstructure-dominated damage mode involving void/crack nucleation and growth at pre-existing pores. The critical porosity level where the suppression of spall failure is first observed, as well as the spall location, is dependent on both the volume fraction and the size of the initially fabricated pores. In samples of 500 μm pore size, the suppression of spall failure is observed with as little as 1 vol. % porosity, while samples with smaller pores (200 μm) still experience spall-centered tensile stress dominated failure with higher levels (5 vol. %) of porosity. In the case of pore-centered microstructure-dominated failure, spall damage can occur but the spall plane is shifted toward the rear free surface, or more generally in areas further away from the region with pores. Highly heterogeneous deformation twinning, shear banding, grain rotation, and cracking are observed in the vicinity of pre-existing pores and expected spall failure sites.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mean-field model for the Curie-Weiss temperature dependence of coherence length in metallic liquids

The coherence length of the medium-range order (MRO) in metallic liquids is known to display a Curie-Weiss temperature dependence; its inverse is linearly related to temperature, and when extrapolated from temperatures above the glass transition, the coherence length diverges at a negative temperature with a critical exponent of unity. We propose a mean-field pseudospin model that explains this behavior. Specifically, we model the atoms and their local environment as Ising spins with antiferromagnetic exchange interactions. We further superimpose an exchange interaction between dynamical heterogeneities, or clusters of atoms undergoing cooperative motion. The coherence length in the metallic liquid is thus the correlation length between dynamical heterogeneities. Overall, our results reaffirm the idea that the MRO coherence length is a measure of point-to-set correlations, and that local frustrations in the interatomic interactions are prominent in metallic liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2024

4D-STEM Mapping of Nanocrystal Reaction Dynamics and Heterogeneity in a Graphene Liquid Cell

Chemical reaction kinetics at the nanoscale are intertwined with heterogeneity in structure and composition. However, mapping such heterogeneity in a liquid environment is extremely challenging. Here, in this work, we integrate graphene liquid cell (GLC) transmission electron microscopy and four-dimensional scanning transmission electron microscopy to image the etching dynamics of gold nanorods in the reaction media. Critical to our experiment is the small liquid thickness in a GLC that allows the collection of high-quality electron diffraction patterns at low dose conditions. Machine learning-based data-mining of the diffraction patterns maps the three-dimensional nanocrystal orientation, groups spatial domains of various species in the GLC, and identifies newly generated nanocrystallites during reaction, offering a comprehensive understanding on the reaction mechanism inside a nanoenvironment. This work opens opportunities in probing the interplay of structural properties such as phase and strain with solution-phase reaction dynamics, which is important for applications in catalysis, energy storage, and self-assembly.

four-dimensional scanning transmission electron mi↗
DOE OSTI2023

Structural properties of aqueous grown polydopamine thin films determined by neutron reflectometry

Here, in this work, neutron reflectometry (NR) studies of the bio-mimetic polymer, polydopamine (PDA), deposited from differing initial concentrations of precursor material dopamine hydrochloride for a range of polymerization times, is reported. PDA can form a complex and highly versatile polymer film, with many structure studies having been performed previously, but a comprehensive structural determination of PDA by NR is lacking in the literature. It was found that simple box models were incapable of fully explaining the observed data, necessitating the use of a composite model consisting of the weighted average of both the 1 and 2 box models to fully capture the heterogeneous nature of the PDA film structure. Confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM) were performed to capture the surface structure and relative mechanical difference between the separate domains of the PDA. The CLSM results provide evidence that the PDA domains are larger than the coherent scattering length of a neutron used in these measurements, 10μm, supporting the need for a composite model. The AFM measurements show complex structure below the coherence length provide physical justification for the two box model. It was determined that film structure and quality are both heavily impacted by the initial concentration of dopamine hydrochloride and the polymerization time, giving confidence to the highly customizable nature of PDA as an adhesion promoting interface treatment in composite systems, such as plastic bonded explosives (PBX).

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomic scale investigation of aluminum incorporation, defects, and phase stability in β -(Al x Ga 1-x ) 2 O 3 films

The development of novel ultra-wide bandgap (UWBG) materials requires precise understanding of the atomic level structural origins that give rise to their important properties. We study the aluminum atom incorporation, defect formation, and their relationships with phase stability in β-(Al x Ga 1-x ) 2 O 3 films, a promising candidate for UWBG applications, to explain atomic scale structural characteristics and properties using a combination of quantitative scanning transmission electron microscopy (STEM) and density functional theory (DFT). Our STEM analysis indicates that ~54% of the incorporated Al substitutes on the octahedrally coordinated Ga 2 site in a series of films grown with different techniques and alloy concentrations. DFT calculations show that, while Al energetically prefers the octahedral site, surface reconstructions and kinetic limitations during the epitaxial growth are responsible for Al occupying both octahedral and tetrahedral sites in (Al x Ga 1-x ) 2 O 3 , ultimately limiting the stability of the β-phase at x < ~50%. Local heterogeneity of composition results in the formation of a planar defect, affecting the stability of the β-phase. The similarity of such inclusions to the metastable γ-phase is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quantitative characterization of gradient microstructures: A study on friction stir spot processing of pure cobalt

Heterogeneous microstructures in polycrystalline metals can enhance the strength and ductility, outperforming homogeneous structures of similar composition. This study investigates deformed cobalt via friction stir spot processing with varying dwell times to uncover the effects of plastic deformation and heat generation on the formation of morphological, phase, and grain boundary character gradients. A new approach to quantify the morphological gradients in materials, which describes grain morphology in terms of density followed by parametric regression, enables direct quantification of processing depth and gradient sharpness. Results show that longer processing times increase the steepness of morphological gradients and reduce the deformation depth for friction stir spot processing with low plunge depths and high tool rotational speeds. The amount of retained FCC is increased in the shorter processing conditions, primarily due to refined grain size, increased defect content, and reduced heat generation. Crystallographic texture analysis of the HCP phase indicated a dominant B-fiber described by (0001) ∥ shear plane normal in the extreme processing conditions and the formation of a P-fiber, shear direction ∥ ⟨11$\bar2$0⟩ for intermediate dwell times. The texture of the FCC phase for low processing times was a C texture {100}⟨011⟩ where longer processing times were dominated by a [001] fiber texture with a main {110}⟨100⟩ orientation and emergence of a slight [111] fiber in the longest processing condition. The approaches outlined in this work give insight into quantifying gradients and improve the understanding of highly deformed cobalt.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Novel method to control explosive shock sensitivity: Formulations, experiments and modeling

The microstructure of a heterogeneous high explosive (HE) affects its shock initiation sensitivity and detonation performance. Alteration of the void content and/or void structure (i.e., bulk heating or mechanical damage) therefore changes the shock initiation behavior. Controlling and predicting the change in shock sensitivity after an HE has undergone microstructural changes addresses an important and challenging goal for the design and understanding of novel energetic material formulations. In this study, we aimed to develop HE systems to precisely tune shock sensitivity by a thermal treatment prior to use. Specifically, we incorporated a small fraction (1 wt% or less) of thermally expandable microspheres (TEMs) during the formulation process of various plastic-bonded explosives (PBX). TEMs typically consist of a thermoplastic acrylonitrile shell (10-50 µm diameter), which encapsulates an inert low boiling hydrocarbon. Upon heating, the TEMs expand as the shell softens while the hydrocarbon gasifies, increasing the internal pressure and expanding the particle by as much as 120 vol% (irreversibly). Here, we present our progress on shock sensitivity comparisons of HE formulations doped with TEMs after heating and expansion. Experiments, using Composition C-4 thermally cycled to 120°C, showed an increase in shock sensitivity. Additionally, mesoscale modeling revealed that the TEM itself does not act as a hotspot, but instead has a secondary effect on the response of nearby voids. We conclude that TEMs indeed do provide a method to tune shock sensitivity. Further, our results emphasize the non-uniformity of shock waves at the mesoscale, and that upstream defects influence the reactivity of downstream defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Phase segregation dynamics in mixed-halide perovskites revealed by plunge-freeze cryo-electron microscopy

Mixed-halide lead perovskites, with photoexcited charge-carrier properties suitable for high-efficiency photovoltaics, hold significant promise for high-efficiency tandem solar cells. However, phase segregation under illumination, where an iodide-rich phase forms carrier trap states, remains a barrier to application. This study employs plunge-freeze cryoelectron microscopy to visualize nanoscale phase segregation dynamics in CsPb(Br x I 1–x ) 3 films. By rapidly freezing the illuminated samples, we preserve transient photoexcited ion distributions for high-resolution structural and compositional analysis at the nanoscale. Cryogenic scanning transmission electron microscopy (STEM) techniques (electron energy loss spectroscopy [EELS] and 4D-STEM) captured the dynamics of photo-induced iodine migration from grain boundaries to centers, identified the buildup of anisotropic strain, and captured the heterogeneous evolution of this process within a single grain. These findings provide insight into microscopic phase segregation mechanisms and their dynamics, enhancing our understanding of mixed-halide perovskite photostability.

42 ENGINEERING↗
DOE OSTI2021

Assessment of ORIGEN Reactor Library Development for Pebble-Bed Reactors Based on the PBMR-400 Benchmark

This report provides an evaluation of present SCALE capabilities for modeling depletion of pebble-bed reactor systems, using the PBMR-400 benchmark as a test case. A specific aim of this work is to understand the system characteristics required to generate production-quality reactor data libraries for rapid depletion calculations with ORIGEN. This report includes a discussion of present SCALE capabilities for modeling doubly heterogeneous fuels, prior SCALE work modeling pebble bed–type reactors, and a detailed neutronic analysis of the PBMR-400 core for both fresh and equilibrium-composition core conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Energy Efficient Material Processing through Automated Process Monitoring and Controls

Smart manufacturing is bound to play a crucial role in reducing global energy consumption while accelerating economic development. This phenomenon is evident in advanced sensing technology developments, data analytics and machine learning/AI, automated controls, cloud computing, etc. The immediate opportunity for smart manufacturing is to improve the energy efficiency of manufacturing operations through innovations in processes and controls. The manufacturing industry still consumes about 30% of total global energy production, which is significant. This program focused on the recommendation of heterogeneous sensors to monitor the Chemical Vapor Infiltration (CVI) process parameters, states, and key performance indices and utilize cloud computing to sort and analyze the real-time data. Learning through data analytics helps guide the control parameters affecting energy usage. The target process in the program is the CVI process at the Honeywell South Bend facility, which is one of the most energy-intensive manufacturing industries.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

New self-consistent homogenization for thermo-elastic polycrystals with imperfect interfaces

Here we present a new thermo-elastic self-consistent formulation to calculate the thermo-mechanical response of polycrystalline aggregates with imperfect interfaces. The new model is based on an improved treatment of the effect of imperfect interfaces on the micromechanical response of the grains compared to pre-existing models. New expressions/algorithms are derived for the effective elastic and thermal properties, localization relations, and calculation of intragranular field fluctuations. In addition, derivation of a novel integral equation for the strain field in a heterogeneous elastic medium subjected to arbitrary thermal strain field and displacement jumps is presented. The new model is applied to study the effective thermo-elastic properties and average field fluctuations as a function of the interface properties for imperfectly-bonded triaminotrinitrobenzene (TATB) polycrystalline granular aggregates. The proposed formulation is general in the sense that it can be extended to other material systems and deformation regimes that require a proper consideration of the effect of imperfect interface properties on the material's thermo-mechanical response.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cerium(IV) Enhances the Catalytic Oxidation Activity of Single-Site Cu Active Sites in MOFs

The rates of catalytic oxidation of cyclohexane and CO are four and twenty times higher, respectively, with Cu supported on a cerium-based MOF than on the structurally analogous zirconium material. Both Ce- and Zr-based copper catalysts feature uncommon threecoordinate CuII sites bearing different nuclearities, as observed by Cu K-edge extended X-ray absorption fine structure analysis. These findings offer molecular-level understanding of the metal-support interface in MOF catalysts and establish correlations with the more established literature on zirconia and ceria-supported heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nano-spectroscopy of excitons in atomically thin transition metal dichalcogenides

Abstract Excitons play a dominant role in the optoelectronic properties of atomically thin van der Waals (vdW) semiconductors. These excitons are amenable to on-demand engineering with diverse control knobs, including dielectric screening, interlayer hybridization, and moiré potentials. However, external stimuli frequently yield heterogeneous excitonic responses at the nano- and meso-scales, making their spatial characterization with conventional diffraction-limited optics a formidable task. Here, we use a scattering-type scanning near-field optical microscope (s-SNOM) to acquire exciton spectra in atomically thin transition metal dichalcogenide microcrystals with previously unattainable 20 nm resolution. Our nano-optical data revealed material- and stacking-dependent exciton spectra of MoSe 2 , WSe 2 , and their heterostructures. Furthermore, we extracted the complex dielectric function of these prototypical vdW semiconductors. s-SNOM hyperspectral images uncovered how the dielectric screening modifies excitons at length scales as short as few nanometers. This work paves the way towards understanding and manipulation of excitons in atomically thin layers at the nanoscale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗