SEARCH · Engineering Papers

Results for “FEASIBILITY STUDIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Phobos and Deimos encounter experiment during the Viking extended mission

The Viking '75 Mission to Mars permits a truly unique opportunity to explore the natural satellites, Phobos and Deimos, from distances measured in the tens of kilometers. Because of the particular orbital geometry currently planned for the Viking Mission, the Viking spacecraft can be maneuvered to make repeated passes very close to Phobos and Deimos during the proposed extended mission phase. Multipass images of both satellites will cover approximately 75% of Phobos and 50% of Deimos. Resolution on the order of 50 meters is possible. Close encounters will permit mass determination to an accuracy of tens of percent. A preliminary feasibility study has been made which shows that the propulsive requirements are nominal, the orbit determination accuracy is adequate, and the satellites are within the scan platform pointing capability during portions of each encounter.

Tolson, R. H.↗

NASA NTRS1975

Results of examination of the nasal mucosa

The olfactory epithelium, but not the nasal respiratory epithelium, of the four pocket mice (Perognathus longimembris) that survived their flight on Apollo XVII showed both diffuse alterations and numerous disseminated focal lesions. The olfactory mucosa of the mouse that died during flight was also affected, but to a minor degree insofar as could be determined. All this was in contrast to the normal appearance of the olfactory mucosa of the numerous control animals. A number of possible causes were considered: systemic or regional infection; inhaled particulate material (seed dust); by-products from the KO2 bed in aerosol or particulate form; gas contaminants originating in the flight package; volatile substances from the dead mouse; weightlessness; and cosmic ray particle radiation. Where feasible, studies were conducted in an effort to rule in or rule out some of these potentially causative factors. No definitive conclusions were reached as to the cause of the lesions in the flight mice.

Kraft, L. M.↗

NASA NTRS1975

Improved planetary orbit mission capabilities in the Shuttle era by use of space-storable propulsion systems

Planetary-orbit mission capabilities will be greatly improved by the advent of space-storable retropropulsion systems with liquid fluorine and hydrazine as bipropellants even when the Shuttle/Tug is used as launch vehicle. Having a specific impulse as large as 375 sec, a multimission propulsion module using space-storable propellants with Pioneer or Mariner spacecraft as payload can perform Mercury, Saturn, and Uranus orbiter missions, and even some comet rendezvous missions, more cost effectively and flexibly than one using earth-storable propellants. It also can reduce trip time to the outer planets significantly. This paper presents mission requirements, technology status, system design and performance, development schedules, and costs based on data derived in a recent design and feasibility study.

Meissinger, H. F.↗

NASA NTRS1975

Design of multi-mission chemical propulsion modules for planetary orbiters. Volume 1: Summary report

Results are presented of a conceptual design and feasibility study of chemical propulsion stages that can serve as modular propulsion units, with little or no modification, on a variety of planetary orbit missions, including orbiters of Mercury, Saturn, and Uranus. Planetary spacecraft of existing design or currently under development, viz., spacecraft of the Pioneer and Mariner families, are assumed as payload vehicles. Thus, operating requirements of spin-stabilized and 3-axis stabilized spacecraft have to be met by the respective propulsion module designs. As launch vehicle for these missions the Shuttle orbiter and interplanetary injection stage, or Tug, plus solid-propellant kick motor was assumed. Accommodation constraints and interfaces involving the payloads and the launch vehicle are considered in the propulsion module design. The applicability and performance advantages were evaluated of the space-storable high-energy bipropellants. The incentive for using this advanced propulsion technology on planetary missions is the much greater performance potential when orbit insertion velocities in excess of 4 km/sec are required, as in the Mercury orbiter. Design analyses and performance tradeoffs regarding earth-storable versus space-storable propulsion systems are included. Cost and development schedules of multi-mission versus custom-designed propulsion modules are examined.

Source record↗

NASA NTRS1975

Space shuttle synthetic aperture radar

Results of a feasibility study to investigate a digital signal processor for real-time operation with a synthetic aperture radar system aboard the space shuttle are presented. Pertinent digital processing theory, a description of the proposed system, and size, weight, power, scheduling, and development estimates are included.

Source record↗

NASA NTRS1976

Active controls for ride smoothing

Active controls technology offers great promise for significantly smoothing the ride, and thus improving public and air carrier acceptance, of certain types of transport aircraft. Recent findings which support this promise are presented in the following three pertinent areas: (1) Ride quality versus degree of traveler satisfaction; (2) significant findings from a feasibility study of a ride smoothing system; and (3) potential ride problems identified for several advanced transport concepts.

Conner, D. W.↗

NASA NTRS1975

Advanced bipropellant systems for use on planetary orbiters

Planetary orbit mission capabilities will be greatly improved by the advent of space-storable retro-propulsion systems with liquid fluorine/hydrazine as bipropellants, even when the Space Shuttle/Space Tug is used as launch vehicle. With a specific impulse as high as 375 sec, a multimission propulsion module designed for Pioneer or Mariner class spacecraft as payload and using space-storable propellants, can perform Mercury, Saturn and Uranus orbiter missions, and even some comet rendezvous missions. It also can reduce trip times to the outer planets significantly. The paper presents mission requirements, propulsion technology status, system design, performance, development schedules and cost data, based on results of a recent design and feasibility study.

Meissinger, H. F.↗

NASA NTRS1976

Powered wheels for aircraft

Engineering details, project status, system design and specifications, and test results are presented on a powered-wheel drive system based on the Dynavector rotary actuator. The design and operation of the Dynavector system (with positive displacement very-low-inertia nonrotating vane motor) are reviewed. Feasibility studies, contract data, and findings of braking tests are described. Exploded diagrams of Dynavector details are displayed. Success in using powered wheels in lieu of aircraft main engines for on-ground movements should bring benefits in energy conservation, noise abatement, reduced pollution, and alleviated congestion in the terminal area.

Long, M. J.↗

NASA NTRS1976

Fuel conservative propulsion concepts for future air transports

The results of a feasibility study of proposed fuel conservative propulsion concepts for air transports with an assumed Mach 0.8 cruise capability are summarized. All engines considered are based on projected 1985 technology. Operating fuel requirements, propulsion operating costs, and noise characteristics are compared with those of a present technology turbofan engine. The study indicates that an advanced Brayton cycle gas generator in a turbofan engine or geared to an advanced multibladed, small diameter propeller with a projected efficiency of 80% at Mach 0.8 offers the greatest potential for energy conservation.

Gray, D. E.↗

NASA NTRS1976

Economic analysis of standard interface modules for use with the multi-mission spacecraft, volume 1

A preliminary technical and economic feasibility study was made of the use of Standardized Interstate Modules (SIM) to perform electual interfacing functions that were historically incorporated into sensors. Sensor interface functions that are capable of standardization from the set of missions planned for the NASA Multi-Mission Spacecraft (MMS) in the 1981 to 1985 time period were identified. The cost savings that could be achieved through the replacement of nonstandard sensor interface flight hardware that might be used in these missions with SIM were examined.

Source record↗

NASA NTRS1975

Facts and fiction of learning systems

The methodology that will provide the updated precision for the hardware control and the advanced decision making and planning in the software control is called learning systems and intelligent control. It was developed theoretically as an alternative for the nonsystematic heuristic approaches of artificial intelligence experiments and the inflexible formulation of modern optimal control methods. Its basic concepts are discussed and some feasibility studies of some practical applications are presented.

Saridis, G. N.↗

NASA NTRS1977

Solar thermionic power systems for terrestrial applications

The results of a feasibility study which showed that a low-temperature, high-efficient thermionic power system can efficiently convert solar energy to electrical energy without heat transport, as required by most solar thermal systems are described. A 3-dimensional (2-axis tracking) 93 sq m parabolic solar concentrator, consisting of mirrors on a foam glass substrate and designed to a concentration ratio (mirror area/aperture area) of 2000 is considered for producing a design temperature of 1100 C at an efficiency of 74%. A tracking subsystem must track the sun at an accuracy of a nominal plus or minus 1.0 degree for maximum use of the sun's energy. Each complete solar thermionic power system unit rated at about 20 kWe peak can generate approximately 48,000 kWh/yr. In addition, a thermal energy conversion system can be cascaded within the thermionic power system so that the high quality waste heat can be further utilized to increase the net electrical output. Potential applications of a solar thermionic power generation system are remote sites, apartment house complexes, heating and cooling, hydrogen production and large power stations.

Shimada, K.↗

NASA NTRS1977

Automated image processing of LANDSAT 2 digital data for watershed runoff prediction

The U.S. Soil Conservation Service (SCS) model for watershed runoff prediction uses soil and land cover information as its major drivers. Kern County Water Agency is implementing the SCS model to predict runoff for 10,400 sq cm of mountainous watershed in Kern County, California. The Remote Sensing Unit, University of California, Santa Barbara, was commissioned by KCWA to conduct a 230 sq cm feasibility study in the Lake Isabella, California region to evaluate remote sensing methodologies which could be ultimately extrapolated to the entire 10,400 sq cm Kern County watershed. Digital results indicate that digital image processing of Landsat 2 data will provide usable land cover required by KCWA for input to the SCS runoff model.

Sasso, R. R.↗

NASA NTRS1978

Site selection feasibility for a solar energy system on the Fairbanks Federal Building

A feasibility study was performed for the installation of a solar energy system on the Federal Building in Fairbanks, Alaska, a multifloor office building with an enclosed parking garge. The study consisted of determining the collectable solar energy at the Fairbanks site on a monthly basis and comparing this to the monthly building heating load. Potential conventional fuel savings were calculated on a monthly basis and the overall economics of the solar system applications were considered. Possible solar system design considerations, collector and other system installation details, interface of the solar system with the conventional HVAC systems, and possible control modes were all addressed. Conclusions, recommendations and study details are presented.

Source record↗

NASA NTRS1978

A review of the thermoelectronic laser energy converter (TELEC) program at Lewis Research Center

The investigation of the Thermoelectronic Laser Energy Converter (TELEC) concept began with a feasibility study of a 1 megawatt sized TELEC system. The TELEC was to use either cesium vapor or hydrogen as the plasma medium. The cesium vapor TELEC appears to be the more practical device studied with an overall calculated conversion efficiency of greater than 48%. Following this study, a small TELEC cell was fabricated which demonstrated the conversion of a small amount of laser power to electrical power. The cell developed a short circuit current of 0.7 amperes and an open circuit voltage, as extrapolated from volt-ampere curves, of about 1.5 volts.

Alger, D. L.↗

NASA NTRS1978

Propulsion/flight control integration technology (PROFIT) design analysis status

The propulsion flight control integration technology (PROFIT) program was designed to develop a flying testbed dedicated to controls research. The preliminary design, analysis, and feasibility studies conducted in support of the PROFIT program are reported. The PROFIT system was built around existing IPCS hardware. In order to achieve the desired system flexibility and capability, additional interfaces between the IPCS hardware and F-15 systems were required. The requirements for additions and modifications to the existing hardware were defined. Those interfaces involving the more significant changes were studied. The DCU memory expansion to 32K with flight qualified hardware was completed on a brassboard basis. The uplink interface breadboard and a brassboard of the central computer interface were also tested. Two preliminary designs and corresponding program plans are presented.

Carlin, C. M.↗

NASA NTRS1978

Thermal energy storage for industrial waste heat recovery

The potential is examined for waste heat recovery and reuse through thermal energy storage in five specific industrial categories: (1) primary aluminum, (2) cement, (3) food processing, (4) paper and pulp, and (5) iron and steel. Preliminary results from Phase 1 feasibility studies suggest energy savings through fossil fuel displacement approaching 0.1 quad/yr in the 1985 period. Early implementation of recovery technologies with minimal development appears likely in the food processing and paper and pulp industries; development of the other three categories, though equally desirable, will probably require a greater investment in time and dollars.

Hoffman, H. W.↗

NASA NTRS1978

Applications of thermal energy storage in the cement industry

In the manufacture of cement, literally trillions of Btu's are rejected to the environment each year. The purpose of this feasibility study program was to determine whether thermal energy storage could be used to conserve or allow alternative uses of this rejected energy. This study identifies and quantifies the sources of rejected energy in the cement manufacturing process, established use of this energy, investigates various storage system concepts, and selects energy conservation systems for further study. Thermal performance and economic analyses are performed on candidate storage systems for four typical cement plants representing various methods of manufacturing cement. Through the use of thermal energy storage in conjunction with waste heat electric power generation units, an estimated 2.4 x 10 to the 13th power Btu/year, or an equivalent on investment of the proposed systems are an incentive for further development.

Jaeger, F. A.↗