Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Experimental Validation of Stratified Flow Phenomena, Graphite Oxidation, and Mitigation Strategies of Air Ingress Accidents

The US Department of Energy is performing research and development (R&D) that focuses on key phenomena that are important during challenging scenarios that may occur in the Next Generation Nuclear Plant (NGNP) Program / GEN-IV Very High Temperature Reactor (VHTR). Phenomena identification and ranking studies (PIRT) to date have identified the air ingress event, following on the heels of a VHTR depressurization, as very important (Schultz et al., 2006). Consequently, the development of advanced air ingress-related models and verification and validation (V&V) are very high priority for the NGNP program. Following a loss of coolant and system depressurization, air will enter the core through the break. Air ingress leads to oxidation of the in-core graphite structure and fuel. The oxidation will accelerate heat-up of the bottom reflector and the reactor core and will cause the release of fission products eventually. The potential collapse of the bottom reflector because of burn-off and the release of CO lead to serious safety problems. For estimation of the proper safety margin we need experimental data and tools, including accurate multi-dimensional thermal-hydraulic and reactor physics models, a burn-off model, and a fracture model. We also need to develop effective strategies to mitigate the effects of oxidation. The results from this research will provide crucial inputs to the INL NGNP/VHTR Methods R&D project. This project is focused on (a) analytical and experimental study of air ingress caused by density-driven, stratified, countercurrent flow, (b) advanced graphite oxidation experiments, (c) experimental study of burn-off in the bottom reflector, (d) structural tests of the burnt-off bottom reflector, (e) implementation of advanced models developed during the previous tasks into the GAMMA code, (f) full air ingress and oxidation mitigation analyses, (g) development of core neutronic models, (h) coupling of the core neutronic and thermal hydraulic models, and (i) verification and validation of the coupled models.

99 GENERAL AND MISCELLANEOUS↗

Modeling and Experimental Studies of Mercury Oxidation and Adsorption in a Fixed-Bed and Entrained-Flow Reactor

This report presents experimental and modeling mercury oxidation and adsorption data. Fixed-bed and single-particle models of mercury adsorption were developed. The experimental data were obtained with two reactors: a 300-W, methane-fired, tubular, quartz-lined reactor for studying homogeneous oxidation reactions and a fixed-bed reactor, also of quartz, for studying heterogeneous reactions. The latter was attached to the exit of the former to provide realistic combustion gases. The fixed-bed reactor contained one gram of coconut-shell carbon and remained at a temperature of 150°C. All methane, air, SO 2 , and halogen species were introduced through the burner to produce a radical pool representative of real combustion systems. A Tekran 2537A Analyzer coupled with a wet conditioning system provided speciated mercury concentrations. At 150°C and in the absence of HCl or HBr, the mercury uptake was about 20%. The addition of 50 ppm HCl caused complete capture of all elemental and oxidized mercury species. In the absence of halogens, SO 2 increased the mercury adsorption efficiency to up to 30 percent. The extent of adsorption decreased with increasing SO 2 concentration when halogens were present. Increasing the HCl concentration to 100 ppm lessened the effect of SO 2 . The fixed-bed model incorporates Langmuir adsorption kinetics and was developed to predict adsorption of elemental mercury and the effect of multiple flue gas components. This model neglects intraparticle diffusional resistances and is only applicable to pulverized carbon sorbents. It roughly describes experimental data from the literature. The current version includes the ability to account for competitive adsorption between mercury, SO 2 , and NO 2 . The single particle model simulates in-flight sorbent capture of elemental mercury. This model was developed to include Langmuir and Freundlich isotherms, rate equations, sorbent feed rate, and intraparticle diffusion. The Freundlich isotherm more accurately described in-flight mercury capture. Using these parameters, very little intraparticle diffusion was evident. Consistent with other data, smaller particles resulted in higher mercury uptake due to available surface area. Therefore, it is important to capture the particle size distribution in the model. At typical full-scale sorbent feed rates, the calculations underpredicted adsorption, suggesting that wall effects can account for as much as 50 percent of the removal, making it an important factor in entrained-mercury adsorption models.

01 COAL, LIGNITE, AND PEAT↗

Characterization of the Kootenai River Aquatic Macroinvertebrate Community before and after Experimental Nutrient Addition, 2003-2006. [Chapter 3]

The Kootenai River ecosystem has experienced numerous ecological changes since the early 1900s. Some of the largest impacts to habitat, biological communities, and ecological function resulted from levee construction along the 120 km of river upstream from Kootenay Lake, completed by the 1950s, and the construction and operation of Libby Dam, completed in 1972 on the river near Libby Montana. Levee construction isolated tens of thousands of hectares of historic functioning floodplain habitat from the river channel, eliminating nutrient production and habitat diversity crucial to the functioning of a large river-floodplain ecosystem. Libby Dam continues to create large changes in the timing, duration, and magnitude of river flows, and greatly reduces sediment and nutrient transport to downstream river reaches. These changes have contributed to the ecological collapse of the post-development Kootenai River ecosystem and its native biological communities. In response to this artificial loss of nutrients, experimental nutrient addition was initiated in the Kootenay Lake's North Arm in 1992, the South Arm in 2004, and in the Kootenai River at the Idaho-Montana border during 2005. This report characterizes the macroinvertebrate community in the Kootenai River and its response to experimental nutrient addition during 2005 and 2006. This report also provides an initial evaluation of cascading trophic interactions in response to nutrient addition. Macroinvertebrates were sampled at 12 sites along a 325 km section of the Kootenai River, representing an upriver unimpounded reference reach, treatment and control canyon reach sites, and braided and meandering reach sites, all downstream from Libby Dam. Principle component analysis revealed that richness explained the greatest amount of variability in response to nutrient addition as did taxa from Acari, Coleoptera, Ephemeroptera, Plecoptera, and Trichoptera. Analysis of variance revealed that nutrient addition had a significant effect (p<0.0001) on invertebrate abundance, biomass, and richness at sites KR-9 and KR-9.1 combined (the zone of maximum biological response). Richness, a valuable ecological metric, increased more than abundance and biomass, which were subject to greater sampling bias. Cascading trophic interactions were observed as increased algal accrual, increased in-river invertebrate abundance, and increased invertebrate counts in mountain whitefish (Prosopium williamsonii) guts samples, but were not quantitatively tested. Sampling and analyses across trophic levels are currently ongoing and are expected to better characterize ecological responses to experimental nutrient addition in the Kootenai River.

13 HYDRO ENERGY↗

Characterization of the Kootenai River Algae Community and Primary Productivity Before and After Experimental Nutrient Addition, 2004–2007 [Chapter 2, Kootenai River Algal Community Characterization, 2009 KTOI REPORT].

The Kootenai River ecosystem (spelled Kootenay in Canada) has experienced numerous ecological changes since the early 1900s. Some of the largest impacts to habitat, biological communities, and ecological function resulted from levee construction along the 120 km of river upstream from Kootenay Lake, completed by the 1950s, and the construction and operation of Libby Dam on the river near Libby Montana, completed in 1972. Levee construction isolated tens of thousands of hectares of historic functioning floodplain habitat from the river channel downstream in Idaho and British Columbia (B.C.) severely reducing natural biological productivity and habitat diversity crucial to large river-floodplain ecosystem function. Libby Dam greatly reduces sediment and nutrient transport to downstream river reaches, and dam operations cause large changes in the timing, duration, and magnitude of river flows. These and other changes have contributed to the ecological collapse of the post-development Kootenai River ecosystem and its native biological communities. In response to large scale loss of nutrients, experimental nutrient addition was initiated in the North Arm of Kootenay Lake in 1992, in the South Arm of Kootenay Lake in 2004, and in the Kootenai River at the Idaho-Montana border during 2005. This report characterizes baseline chlorophyll concentration and accrual (primary productivity) rates and diatom and algal community composition and ecological metrics in the Kootenai River for four years, one (2004) before, and three (2005 through 2007) after nutrient addition. The study area encompassed a 325 km river reach from the upper Kootenay River at Wardner, B.C. (river kilometer (rkm) 445) downstream through Montana and Idaho to Kootenay Lake in B.C. (rkm 120). Sampling reaches included an unimpounded reach furthest upstream and four reaches downstream from Libby Dam affected by impoundment: two in the canyon reach (one with and one without nutrient addition), a braided reach, and a meandering reach. The study design included 14 sampling sites: an upstream, unimpounded reference site (KR-14), four control (non-fertilized) canyon sites downstream from Libby Dam, but upstream from nutrient addition (KR-10 through KR-13), two treatment sites referred to collectively as the nutrient addition zone (KR-9 and KR-9.1, located at and 5 km downstream from the nutrient addition site), two braided reach sites (KR-6 and KR-7), and four meander reach sites (KR-1 through KR-4). A series of qualitative evaluations and quantitative analyses were used to assess baseline conditions and effects of experimental nutrient addition treatments on chlorophyll, primary productivity, and taxonomic composition and metric arrays for the diatom and green algae communities. Insufficient density in the samples precluded analyses of bluegreen algae taxa and metrics for pre- and post-nutrient addition periods. Chlorophyll a concentration (mg/m{sup 2}), chlorophyll accrual rate (mg/m{sup 2}/30d), total chlorophyll concentration (chlorophyll a and b) (mg/m{sup 2}), and total chlorophyll accrual rate (mg/m{sup 2}/30d) were calculated. Algal taxa were identified and grouped by taxonomic order as Cyanophyta (blue-greens), Chlorophyta (greens), Bacillariophyta (diatoms), Chrysophyta (goldens), and dominant species from each sample site were identified. Algal densities (number/ml) in periphyton samples were calculated for each sample site and sampling date. Principal Component Analysis (PCA) was performed to reduce the dimension of diatom and algae data and to determine which taxonomic groups and metrics were contributing significantly to the observed variation. PCA analyses were tabulated to indicate eigenvalues, proportion, and cumulative percent variation, as well as eigenvectors (loadings) for each of the components. Biplot graphic displays of PCA axes were also generated to characterize the pattern and structure of the underlying variation. Taxonomic data and a series of biological and ecological metrics were used with PCA for diatoms and algae. Algal metrics included a suite of abundance, diversity, richness, dominance, and other measures, whereas additional trophic status and chemical limnology metrics, Van Dam indices and morphological groupings were employed in diatom PCAs. Analysis of Variance (ANOVA) was carried out using chlorophyll metrics and taxa and metric arrays for the diatom and green algae community data for comparing site differences from 2004 through 2007. Clear, statistically significant, biological responses from chlorophyll metrics, and taxa and metrics of the diatom and algal communities were revealed following experimental nutrient addition in the Kootenai River. Chlorophyll metric responses were more often significant and generally greater in magnitude than diatom and green algae taxa and metric responses.

13 HYDRO ENERGY↗

Modeling and Experimental Studies of Mercury Oxidation and Adsorption in a Fixed-Bed Reactor

This report presents experimental and modeling mercury oxidation and adsorption data. Fixed-bed and single-particle models of mercury adsorption were developed. The experimental data were obtained with two reactors: a 300-W, methane-fired, tubular, quartz-lined reactor for studying homogeneous oxidation reactions and a fixed-bed reactor, also of quartz, for studying heterogeneous reactions. The latter was attached to the exit of the former to provide realistic combustion gases. The fixed-bed reactor contained one gram of coconut-shell carbon and remained at a temperature of 150°C. All methane, air, SO 2 , and halogen species were introduced through the burner to produce a radical pool representative of real combustion systems. A Tekran 2537A Analyzer coupled with a wet conditioning system provided speciated mercury concentrations. At 150°C and in the absence of HCl or HBr, the mercury uptake was about 20%. The addition of 50 ppm HCl caused complete capture of all elemental and oxidized mercury species. In the absence of halogens, SO 2 increased the mercury adsorption efficiency to up to 30 percent. The extent of adsorption decreased with increasing SO 2 concentration when halogens were present. Increasing the HCl concentration to 100 ppm lessened the effect of SO 2 . The fixed-bed model incorporates Langmuir adsorption kinetics and was developed to predict adsorption of elemental mercury and the effect of multiple flue gas components. This model neglects intraparticle diffusional resistances and is only applicable to pulverized carbon sorbents. It roughly describes experimental data from the literature. The current version includes the ability to account for competitive adsorption between mercury, SO 2 , and NO 2 . The single particle model simulates in-flight sorbent capture of elemental mercury. This model was developed to include Langmuir and Freundlich isotherms, rate equations, sorbent feed rate, and intraparticle diffusion. The Freundlich isotherm more accurately described in-flight mercury capture. Using these parameters, very little intraparticle diffusion was evident. Consistent with other data, smaller particles resulted in higher mercury uptake due to available surface area. Therefore, it is important to capture the particle size distribution in the model. At typical full-scale sorbent feed rates, the calculations under-predicted adsorption, suggesting that wall effects can account for as much as 50 percent of the removal, making it an important factor in entrained-mercury adsorption models.

01 COAL, LIGNITE, AND PEAT↗

Uncertainties and Limitations of Experimental Thrust and Pressure Gain Measurements in a Rotating Detonation Combustor

Experimentally measuring the pressure gain through the method of equivalent available pressure is prone to many experimental uncertainties. This study performs a detailed uncertainty analysis of the thrust and pressure gain measurements utilizing data from a H2/air operated rotating detonation combustor with an axial air inlet and a 50% exit constriction. The measured (negative) pressure gain values agree with the results in literature for similar inlet-to-exit area ratios. Specific considerations are given to the uncertainty in thrust measurement introduced by the base drag correction on the inner-body. The assumed unity Mach number utilized in the equivalent available pressure methodology is evaluated experimentally with two different methods using time-averaged measurements at the exhaust plane. A definitive demonstration of gain will be challenging given the assessed uncertainties, but recommendations are given to increase the precision of the equivalent available pressure methodology to estimate pressure gain.

33 ADVANCED PROPULSION SYSTEMS↗

SPRUCE Terrestrial Laser Scanning of Experimental Plots, Beginning in 2015

This data set comprises terrestrial laser scanning (TLS) point clouds from the SPRUCE experimental plots located in the S1-Bog of the Marcell Experimental Forest (MEF) near Grand Rapids, Minnesota. In 2015 and 2020 the 12 experimental SPRUCE plots were scanned near peak foliage ("summer”). In 2016-2019 and 2021-2023 the 12 plots were scanned prior to green up ("spring”) and once near peak foliage (Table 1). Additional data will be added through summer 2025. A RIEGL VZ-1000 unit was used to collect all scans. Four TLS scans in each plot were registered to produce a single point cloud per plot using RiSCAN PRO v2.3 software. Up to six additional scans were registered to account for data occlusion when necessary. Point clouds are saved in LAS (*.las) 1.2 format. Point clouds were geo-registered to surveyed plot locations. There are 192 *.las files provided with this dataset.

54 ENVIRONMENTAL SCIENCES↗

SPRUCE Microtopography of Experimental Plots Derived from Terrestrial Laser Scans Beginning in 2016

This dataset consists of maps and summaries of very high resolution (1 cm2) spatial data derived from terrestrial laser scans (TLS) characterizing the microtopography (hummocks and hollows) in 12 SPRUCE experimental plots from 2016-2018. The SPRUCE experiment is located in the S1-Bog of the Marcell Experimental Forest (MEF) near Grand Rapids, Minnesota. Additional data will be added through Summer 2021.The TLS sampling plan follows the SPRUCE experimental design, with scanning of the ten enclosed treatment plots with five temperature treatments (0, 2.25, 4.5, 6.75, and 9°C) with and without elevated CO2 (~900 ppm) and the two monitored ambient plots without enclosures. Enclosures are octagonal in shape and are 12.8 m in diameter (114.8 m2 in area), 8 m tall, with a belowground corral that penetrates through the peat to glacial material below, which averages 2.5 m deep across the site. In the spring of each year, four TLS scans were taken per plot/enclosure and registered together to produce a single point cloud for each plot (Figure 2A). Digital surface models (DSMs) were generated from the point clouds and clipped to the inside boundary of the boardwalk in each plot resulting in an approximately 9 x 9 m study area. . All other characterization data types were derived from plot DSMs (elevation), including: slope (Figure 3), concavity (Figure 4), index used for microform classification (Hollow Index) (Figure 6), and microforms (Figure 2C; hummocks and hollows) classified using three methodologies.

54 ENVIRONMENTAL SCIENCES↗

SPRUCE Tritium in Porewater of SPRUCE Experimental Plots and Neighboring Peatlands, and in Groundwater, Stream Water, and Precipitation of the S1 Bog, 2014-2016

This data set reports the tritium concentrations in (1) porewater from selected SPRUCE experimental plots located in the S1 bog and in (2) groundwater, streamwater, and precipitation in the S1 bog watershed, and (3) in porewater from the S2 bog, S3 fen, and Bog Lake fen. All sites are located at the USDA Forest Service, Marcell Experimental Forest (MEF) near Grand Rapids, MN. Samples were collected between June of 2014 and August of 2016. These data include samples collected pre- and post-belowground warming treatments associated with the SPRUCE Experiment. There are 10 experimental plots in SPRUCE: 5 temperature treatments (+0, +2.25, +4.5, +6.75, +9°C) at ambient CO2, and the same 5 temperature treatments at elevated CO2 (+500 ppm). Porewater samples in this dataset were collected from three of the warming treatment plots (+0, +4.5, +9°C) at ambient CO2.

54 ENVIRONMENTAL SCIENCES↗

SPRUCE Ground Observations of Phenology in Experimental Plots, 2018

This data set consists of phenological transition dates, as derived from direct observations of vegetative and reproductive phenology recorded by a human observer, from the SPRUCE experiment during 2018, the third full year of whole-ecosystem warming (Hanson et al. 2017). Both spring and autumn phenological events are included. Since April 2016, human observers have been directly tracking the phenology of both woody and herbaceous species on a weekly schedule within the SPRUCE experimental chambers. The observed date report here is the first survey date on which an event/phenophase was definitively observed. The SPRUCE experiment is located within the S1 peat bog at the Marcell Experimental Forest, approximately 40 km north of Grand Rapids in north-central Minnesota, USA. User note: Ground observations of phenology from 2016-2020 are available. See SPRUCE Ground Observations of Phenology in Experimental Plots, 2021 https://doi.org/10.25581/spruce.094/1874936 for the most recent data as well as links to all other ground phenology datasets.

54 ENVIRONMENTAL SCIENCES↗

SPRUCE Ground Observations of Phenology in Experimental Plots, 2019

This data set consists of phenological transition dates, as derived from direct observations of vegetative and reproductive phenology recorded by a human observer, from the SPRUCE experiment during 2019, the third full year of whole-ecosystem warming (Hanson et al. 2017). Both spring and autumn phenological events are included. Since April 2016, human observers have been directly tracking the phenology of both woody and herbaceous species on a weekly schedule within the SPRUCE experimental chambers. The observed date report here is the first survey date on which an event/phenophase was definitively observed. The SPRUCE experiment is located within the S1 peat bog at the Marcell Experimental Forest, approximately 40 km north of Grand Rapids in north-central Minnesota, USA. User note: Ground observations of phenology from 2016-2021 are available. See SPRUCE Ground Observations of Phenology in Experimental Plots, 2021 https://doi.org/10.25581/spruce.094/1874936 for the most recent data as well as links to all other ground phenology datasets.

54 ENVIRONMENTAL SCIENCES↗

SPRUCE Vertical Profiles of CO2 and H2O Concentrations in Air in Experimental Plots Beginning in 2015

This dataset provides a record of hourly average CO2 and H2O concentrations in air at 4 vertical locations (0.5, 1, 2, and 4 m above ground level (agl)) on the central tower location for each of 13 SPRUCE experimental plots. Ten plots have enclosures (plots 4, 6, 8, 10, 11, 13, 16, 17, 19, and 20) and three plots (5, 7 and 21) are ambients without enclosures. Data are included for measurement periods beginning in 2015 and extend throughout the whole ecosystem warming (WEW) manipulations for the SPRUCE Project (Hanson et al. 2016, 2017). In August 2015, WEW was initiated at 5 warming levels (+0, +2. +4.5, +6.75 and +9 °C) with 2 plots per warming level. DPH measurements were underway before the initiation of WEW heating treatments and both are expected to operate through 2025. Elevated CO2 treatments were initiated within 5 experimental plots (Plots 4, 10, 11, 16 and 19) in June of 2016. All measurements were made at the 8.1-ha S1 bog forest site in northern Minnesota, 40 km north of Grand Rapids, in the USDA Forest Service Marcell Experimental Forest (MEF).

54 ENVIRONMENTAL SCIENCES↗

ATOMIC Simulations and Experimental Data for Basalt-like Compounds

This data consists of simulations and experimental measurements of laser-induced breakdown spectroscopy (LIBS). The simulations are produced by ATOMIC, a general purpose plasma modeling and kinetics code that has been designed to compute emission (or absorption) spectra from plasmas [2]. The makeup of the plasma was considered to be divided into some proportion water, some proportion Martian atmosphere (CO2), and some proportion target (from the rock or object impacted by the laser), where these proportions add to 1. Based on expert knowledge, the proportion of water was kept in the range [0.0,0.5] and the proportion of atmosphere was kept in the range [0.02, 0.9]. Our overall suite of simulations contains six sets of simulations that differ in which elements were considered to make up the target. Within each set, we used uniformly drawn temperatures and log mass densities within pre-specified ranges. The temperature range was [0.5,1.5] eV and the log (base 10) mass density range was [-7,-4]. The proportion of water, atmosphere, and target were drawn from a symmetric Dirichlet distribution, but draws in which the propor- tion of water or atmosphere exceeded the pre-specified limits were rejected from the design. Up to eleven constituent elements (Si, Al, Fe, Mg, Ca, O, Ti, Mn, Na, K, P) were considered for the target, as they are the most common elements found in basalt compounds and were used in [1]. For each run, the proportions of the constituent elements making up the target were drawn from a symmetric Dirichlet distribution. We ran 1,350 simulations that included nonzero proportions of all eleven elements. We also ran simulations which excluded some of these elements. In particular, we ran 1,000 simulations that only included nonzero proportions for the six most common elements (Si, Al, Fe, Mg, Ca, O). We also ran five sets, each with 500 simulations, that only included nonzero proportions for five of the six most common elements (but where all sets included O). Thus, we generated a total of 4,850 spectra representing basalt-like compounds in which the target was comprised of oxygen and between four and ten other elements. The ATOMIC code produced spectra over a range of 240nm - 880nm that roughly mimics the range collected by the ChemCam instrument on the Mars rover Curiosity. Each spectra had 32,000 wavelengths split across three spectrometer ranges (to mimic ChemCam). The experimental data, described in [1], measures a prepared basalt sample. All files are kept in directories whose names indicate the set of elements considered for the target with file names numbered to indicate the line in the design files used to produce the simulation. The designs are provided as text files with names indicating their purpose. The experimental data is provided as a CSV file which contains a header with measurement information, followed by a collection of 50 shots across a collection of wavelengths, along with the computed median and mean across shots.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PNNL DataHub Project: Omics Lethal Human Viruses Project Profiling of the Host Response to Ebola Virus Infection, Processed Experimental Dataset Catalog

Ebola virus (EBOV) is high risk biological agent, classified as a Category A priority pathogen (Flaviviridae) by the National Institute of Allergy and Infectious Diseases (NIAID), known to cause hemorrhagic fever with high mortality rates in humans. Lethal host-pathogen invasion mechanisms and the cellular intricacies behind these fatal infections still remain unclear. The NIAID Modeling Host Responses to Understand Severe Human Virus Infections Research Program project (2013-2018) aimed to develop an improved comprehensive understanding of the host response to a suite of viruses causing lethal infections leveraging a systems biology approach. Herein, PNNL sub-projects provide a never before released comprehensive infectious disease collection of primary and secondary transformation multi-Omics data profiling a series of priority pathogen primary experimental studies for enhanced open-access to viral Omics datasets and project lifecycle metadata. Secondary host-pathogen viral dataset downloads contain one or more statistically processed (normalization data transformation) quantitative dataset collections resulting in qualitative expression analyses of primary host-pathogen experimental study designs. Leveraging unique high-resolution Omics capabilities for proteomics (P), metabolomics (M), lipidomics (L), and transcriptomics (T) dataset downloads each have a direct relationship to a primary sample submission corresponding to a specific Ebola virus [NCBITAXON:186536] (Zaire/Makona or Zaire/Mayinga) experimental infection study. Human host samples types include peripheral blood mononuclear cells isolated from blood plasma ["PBMC", BTO:0001025], human hepatoma carcinoma cells ["HUH", BTO:0001950], human umbilical vein endothelial cells ["HUVEC", BTO:0001949], immortalized human hepatocyte cells ["IHH", BTO:0006147], and human histiocytic lymphoma cells ["U937", BTO:0001412].

59 BASIC BIOLOGICAL SCIENCES↗

PNNL DataHub Project: Omics Lethal Human Viruses Project Profiling of the Host Response to Influenza A Virus Infection, Processed Experimental Dataset Catalog

Influenza A virus (IAV) is a high risk biological agent, classified as a Category C priority pathogen (Orthomyxoviridae) by the National Institute of Allergy and Infectious Diseases (NIAID), and is known to cause severe respiratory disease with high mortality rates in humans. Lethal host-pathogen invasion mechanisms and the cellular intricacies behind these fatal infections still remain unclear. The NIAID Modeling Host Responses to Understand Severe Human Virus Infections Research Program project (2013-2018) aimed to develop an improved comprehensive understanding of the host response to a suite of viruses causing lethal infections leveraging a systems biology approach. Herein, PNNL sub-projects provide a never before released comprehensive infectious disease collection of primary and secondary transformation multi-Omics data profiling a series of priority pathogen primary experimental studies for enhanced open-access to viral Omics datasets and project lifecycle metadata. Secondary host-pathogen viral dataset downloads contain one or more statistically processed (normalization data transformation) quantitative dataset collections resulting in qualitative expression analyses of primary host-pathogen experimental study designs. Leveraging unique high-resolution Omics capabilities for proteomics (P), metabolomics (M), lipidomics (L), and transcriptomics (T) dataset downloads each have a direct relationship to a primary sample submission corresponding to a specific Influenza A virus [NCBITAXON:11320] experimental infection study. Host sample types include human lung adenocarcinoma cells ["Calu-3", BTO:0002750] and whole mouse lung [BTO:0000763] tissue collections.

59 BASIC BIOLOGICAL SCIENCES↗

PNNL DataHub Project: Omics Lethal Human Viruses Project Profiling of the Host Interferon-Stimulated Response to Virus Infection, Processed Experimental Dataset Catalog

Human Interferon (IFN) alpha, beta, and gamma participate in the body's natural immune response to lethal virus infection and disease.The NIAID Modeling Host Responses to Understand Severe Human Virus Infections Research Program project (2013 - 2018) aimed to develop an improved comprehensive understanding of the host response to a suite of viruses causing lethal infections leveraging a systems biology approach. The NIAID Modeling Host Responses to Understand Severe Human Virus Infections Research Program project (2013-2018) aimed to develop an improved comprehensive understanding of the host response to a suite of viruses causing lethal infections leveraging a systems biology approach. Herein, PNNL sub-projects provide a never before released comprehensive infectious disease collection of primary and secondary transformation multi-Omics data profiling a series of priority pathogen primary experimental studies for enhanced open-access to viral Omics datasets and project lifecycle metadata. Secondary host-associated viral dataset downloads contain one or more statistically processed (normalization data transformation) quantitative dataset collections resulting in qualitative expression analyses of primary host-pathogen experimental study designs. Transcriptomics (T) dataset downloads each have a direct relationship to a primary sample submission corresponding to a specific Human Interferon (IFN), interferon alpha (IFNα), interferon beta (IFNβ), and/or interferon gamma (IFNγ) stimulated response to an experimental virus infection treatment study. Host sample types include cerebellum ["CB", BTO:0000232], cortical neurons ["CN", BTO:0004102], cortex ["CT", BTO:0000233], dendritic cells ["DC", BTO:0002042], granule cell neurons ["GCN", BTO:0003393], lymph node ["LN", BTO:0000784], and serum ["SE", BTO:0001239] from mouse (Mus musculus) tissue collections.

59 BASIC BIOLOGICAL SCIENCES↗

Omics Lethal Human Viruses Project Profiling of the Host Response to MERS-CoV Infection, Processed Experimental Dataset Catalog

Middle East Respiratory Syndrome coronavirus (MERS-CoV) is classified as a Category C priority pathogen (Coronaviridae) by the National Institute of Allergy and Infectious Diseases (NIAID), and is known to cause severe respiratory disease with high mortality rates in humans. Lethal host-pathogen invasion mechanisms and the cellular intricacies behind these fatal infections still remain unclear. The NIAID Modeling Host Responses to Understand Severe Human Virus Infections Research Program project (2013-2018) aimed to develop an improved comprehensive understanding of the host response to a suite of viruses causing lethal infections leveraging a systems biology approach. Herein, PNNL sub-projects provide a never before released comprehensive infectious disease collection of primary and secondary transformation multi-Omics data profiling a series of priority pathogen primary experimental studies for enhanced open-access to viral Omics datasets and project lifecycle metadata. Secondary host-pathogen viral dataset downloads contain one or more statistically processed (normalization data transformation) quantitative dataset collections resulting in qualitative expression analyses of primary host-pathogen experimental study designs. Leveraging unique high-resolution Omics capabilities for proteomics (P), metabolomics (M), lipidomics (L), and transcriptomics (T) dataset downloads each have a direct relationship to a primary sample submission corresponding to a specific MERS-CoV [NCBITAXON:1335626] experimental infection study. Host sample types include human lung adenocarcinoma cells ["Calu-3", BTO:0002750], human bronchial epithelial cells ["Calu-3 clone 2B4"; BTO:0002022], primary human fibroblasts ["FB"; BTO:0000452], primary human airway epithelial cells ["HAE"; BTO:0005571], human microvascular endothelial cells ["HMVE"; BTO:0003123], and whole mouse lung [BTO:0000763] tissue collections.

59 BASIC BIOLOGICAL SCIENCES↗

PNNL DataHub Project: Omics Lethal Human Viruses Project Profiling of the Host Response to West Nile Virus Infection, Processed Experimental Dataset Catalog

West Nile virus (WNV) is classified as a Category B priority pathogen (mosquito-borne Flavivirus) by the National Institute of Allergy and Infectious Diseases (NIAID), and are known to cause severe infections in humans where lethal host-associated mechanisms are not clearly defined. The NIAID Modeling Host Responses to Understand Severe Human Virus Infections Research Program project (2013 - 2018) aimed to develop an improved comprehensive understanding of the host response to a suite of viruses causing lethal infections leveraging a systems biology approach. The NIAID Modeling Host Responses to Understand Severe Human Virus Infections Research Program project (2013-2018) aimed to develop an improved comprehensive understanding of the host response to a suite of viruses causing lethal infections leveraging a systems biology approach. Herein, PNNL sub-projects provide a never before released comprehensive infectious disease collection of primary and secondary transformation multi-Omics data profiling a series of priority pathogen primary experimental studies for enhanced open-access to viral Omics datasets and project lifecycle metadata. Secondary host-pathogen viral dataset downloads contain one or more statistically processed (normalization data transformation) quantitative dataset collections resulting in qualitative expression analyses of primary host-pathogen experimental study designs. Leveraging unique high-resolution Omics capabilities for proteomics (P), metabolomics (M), lipidomics (L), and transcriptomics (T) dataset downloads each have a direct relationship to a primary sample submission corresponding a specific West Nile virus [NCBITAXON:11082] (WNV-NY99 382) experimental infection study. Host sample types include cerebellum ["CB", BTO:0000232], cortical neurons ["CN", BTO:0004102], cortex ["CT", BTO:0000233], dendritic cells ["DC", BTO:0002042], granule cell neurons ["GCN", BTO:0003393], lymph node ["LN", BTO:0000784], and serum ["SE", BTO:0001239] from mouse (Mus musculus) tissue collections.

59 BASIC BIOLOGICAL SCIENCES↗