Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exchange interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Size-Dependent Janus-Ligand Shell Formation on PbS Quantum Dots

We studied the size-dependent Janus ligand shell formation on PbS QDs employing an X-type ligand exchange reaction between native oleate ligands and two substituted cinnamic acid ligands, trifluoromethyl- and dimethyl amino-cinnamic acid, representing electron donating and electron withdrawing ligands. The exchange reactions become significantly more favorable for both electron donating and withdrawing ligands (..delta..G becomes more negative) in the smaller QDs compared to the larger QDs likely because the ligand density is smaller on the larger QDs reducing the strength of the ligand-ligand interactions. We found that Janus-ligand shells form more readily on smaller QDs than on bigger QDs with electron donating ligands. We also observed a dependence on the QD concentration that should be considered when forming Janus-ligand shells. Two-dimensional solution nuclear magnetic resonance spectroscopy (2D-NMR) shows evidence of pronounced phase segregation between oleate and electron donating ligands on the smaller QDs consistent with the enhanced ligand-ligand interactions. This study broadens our understanding of how to construct Janus and patchy ligand shell morphologies on small QDs.

14 SOLAR ENERGY↗

Sea–Level Rise Impacts on Tidal Marshes and Estuarine Biogeochemical Processes

We used a numerical model to investigate the effects of sea-level rise (SLR) on the biogeochemical processes in the York River Estuary with extensive tidal marshes. The fully-coupled hydrodynamic-water quality-marsh model accounts for the spatial and temporal variations of physical-biogeochemical interactions between the tidal marshes and surrounding waters. This study focuses on an SLR scenario where the vertical accretion of tidal marshes keeps pace with the rising sea levels. Results show that SLR amplifies the tidal range and prolongs flooding duration, which results in enhanced porewater exchanges of materials between the tidal marshes and the surrounding waters. The increased availability of shallow-water habitats and enhanced light utilization in the shallow areas under SLR promote phytoplankton production (PP) in the shallow-water regions of the York River. Consequently, the organic carbon in the open water is fueled by the contributions from shallow waters and the enhanced export of organic carbon from the marshes. The change in the dissolved oxygen (DO) budget in the York River Estuary is attributed to changes in water column respiration, net metabolism of the benthic layer, reaeration, PP, and increased stratification under SLR. The net DO flux out of the York River increases at the York River mouth. Diel DO variation, especially in the marshes in the upper estuary, promotes phosphorus release from the sediment. The changes in dissolved nitrogen under SLR are relatively minimal.

54 ENVIRONMENTAL SCIENCES↗

Asymmetric pathways for lithium extraction and recovery based on the two-phase equilibrium of layered oxides

Electrochemical intercalation offers a promising platform for Li + extraction. However, only limited types of electrode materials have been investigated. The challenge to broaden and tailor materials for electrochemical intercalation-based Li + extraction lies in the lack of understanding of material’s response upon co-intercalation of multiple ions, therefore, paired process design to enable reversible Li + extraction and recovery. Here, we showcase the design of asymmetric ion pathways for Li + extraction and recovery for host material with complex Li + and Na + interaction using layered cobalt oxide as a model material. The two-phase equilibrium of Na 0.48 CoO 2 and Li 0.94 CoO 2 governs Li + selectivity when a high depth of intercalation is achieved (low vacancy level). We show that the relative rate between ion exchange and intercalation is critical to determine the ion pathways. The relationship can be quantitatively compared using the average pseudo ion exchange rate (C pseudoIX ) and the intercalation rate (C inter ). The ion pathways at the three regimes with C pseudoIX > C inter , C pseudoIX ~ C inter , and C pseudoIX < C inter are constructed. By selecting the optimized ion pathway and particle size, we demonstrate 9.7×10 4 Li + selectivity with 99% purity Li + recovery from an initial 1:1000 Li: Na molar ratio solution using 115 mAh/g specific capacity.

electrochemistry↗

Periodicity staircase in a centrosymmetric Fe/Gd magnetic thin film system

Abstract The presence of multiple competing periodicities may result in a system to go through states with modulated periodicities, an example of which is the self-similar staircase-like structure called the Devil’s Staircase. Herein we report on a novel staircase structure of domain periodicity in an amorphous and centrosymmetric Fe/Gd magnetic thin film system wherein the reciprocal space wavevector Q due to the ordered stripe domains does not evolve continuously, rather exhibits a staircase structure. Resonant X-ray scattering experiments show jumps in the periodicity of the stripe domains as a function of an external magnetic field. When resolved in components, the length-scale step change along Q x was found to be an integral multiple of a minimum step height of 7 nm, which resembles closely to the exchange length of the system. Modeling the magnetic texture in the Fe/Gd system as an achiral spin arrangement, we have been able to reproduce the steps in the magnetization using a Landau-Lifshitz spin dynamics calculation. Our results indicate that anisotropy and not the dipolar interaction is the dominant cause for the staircase pattern, thereby revealing the effect of achiral magnetism.

36 MATERIALS SCIENCE↗

Massive neutrinos and interacting dark matter look alike through the lens of lensing

Here, we demonstrate that the suppression in the lensing power spectrum of the cosmic microwave background (CMB) caused by massive neutrinos can be mimicked by dark matter-baryon interactions at the precision of next-generation CMB experiments. Thus, a determination of neutrino masses from the CMB lensing power spectrum may be compromised. We illustrate the degeneracy for a dark matter-proton cross section ∝ $v$ –4 , which arises in the t-channel exchange of an ultralight mediator in the nonrelativistic limit.

cosmological parameters↗

Photon excess from dark matter and neutrino scattering at MiniBooNE and MicroBooNE

We propose new solutions to MiniBooNE electronlike excess and based on interactions involving light dark matter and/or neutrinos, that is also consistent with the photonlike excess at MicroBooNE. The novelty of our proposal lies in the utilization of a photon arising from 2-to-3 scattering processes between a nucleus/nucleon and a neutrino and/or dark matter via exchanges of light mediators. We find that viable regions exist in the coupling and mass parameter space of the mediators and light dark matter that can simultaneously explain the observed excesses and remain consistent with current experimental constraints. We further highlight that these scenarios can be tested with upcoming data from various ongoing experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-Fidelity Simulations of a Mach 9 Shock-Turbulent Boundary Layer Interaction

High-fidelity large-eddy simulations (LES) and wall-modeled large-eddy simulations (WMLES) are performed on the interaction of a Mach 9 turbulent boundary layer with a 34-degree compression ramp. Our primary interest is the sensitivity of mean and unsteady wall quantities to grid density. Additionally within the context of WMLES, we seek to explore solution sensitivity to the wall-model exchange location.

42 ENGINEERING↗

Unbalancing Symbiotic Nitrogen Fixation: Can We Make Effectiveness More Effective?

One of the most critical uses of carbon fuels is in generating nitrogen fertilizer. Atmospheric dinitrogen is too stable to be used directly by plants, so plants need other chemical forms of nitrogen. Nitrogen fertilizer production uses ~4% of the world’s natural gas. Making N fertilizers leverages methane’s energy content by enabling additional energy to be captured into food and fiber through increased photosynthesis. Manufacturing fertilizer is essential—without it there would only be enough combined nitrogen to feed ~3 billion of the world’s ~7 billion people. How to alter this addiction is not obvious, but the best chance to secure substantial and sustainable amounts of future N might be through symbiotic nitrogen fixation (SNF). SNF describes mutualistic interactions where nitrogen-fixing bacteria provide fixed nitrogen to their plant hosts, freeing them from the need for nitrogen fertilizers. SNF already occurs on a large scale; "biological nitrogen” contributes about 5 Tg N/yr to American agriculture, a quarter of the nitrogen needed. Improving SNF and replacing inorganic fertilizers are both important goals in establishing sustainable and more energy-efficient farming. SNF has been used in agriculture for millennia, largely by using legumes like beans or alfalfa in mixed cropping systems. Legume SNF occurs in root nodules, organs that develop after a growing root is infected by bacteria called rhizobia. In the plant cells of a legume nodule, specialized forms of rhizobia fix nitrogen and can produce enough ammonia to supply the growing plant. The exchange of photosynthetically derived plant carbon compounds for nitrogen reduced by the bacteria is the engine that drives the symbiosis. Important details about the organization of development and metabolism in SNF remain to be determined, such as how plant and bacterial metabolism are coordinated as nitrogen is being fixed and what governs the overall level of nitrogen fixation. Most bacterial mutations that affect SNF completely block fixation (e.g. are Fix – ), providing a limited window into the feedback interactions that must be part of the process. We have investigated an unusual mutant of Sinorhizobium meliloti, a symbiotic partner of alfalfa, that fixes dinitrogen at a normal rate (i.e., it is Fix + ) but is not effective in supporting plant growth (i.e., it is ineffective or Eff – ). We have shown that the mutant has a specific mutation in the glnD gene, which codes for a protein that regulates the bacterial response to nitrogen stress, among other key pathways. A Fix + Eff – phenotype contains an unavoidable puzzle—how is it possible for the bacteria to fix nitrogen at a normal rate and without benefiting the nitrogen starved plant host? After eliminating other possibilities, we proposed that the bacteria synthesize a nitrogen-containing compound that the plant can’t use so that acquiring this compound does not relieve plant nitrogen stress. Extracts of nodules made by glnD mutant strains have high concentrations of pyruvate canaline oxime (PCO), a derivative of the plant defensive compound canaline, a toxic analog of ornithine, an amino acid. Many legumes produce canaline and the related arginine mimic canavanine. For reasons we do not yet understand, the mutation in glnD appears to trigger significant overproduction of canaline in a defense response that leads to substantial synthesis of PCO. We expected the bacteria to be able to use PCO, but we have not been able to grow S. meliloti on PCO under several conditions. PCO thus appears to be a metabolic dead end for both the plant and bacteria. We also examined bacterial catabolic pathways that degrade arginine and canavanine and showed that mutation of these did not alter the symbiosis in an obvious way. In related experiments to examine the metabolic development of root nodules, we carried out an ambitious experiment to simultaneously measure metabolites and protein changes during nodule maturation. For these experiments we used a related symbiotic interaction between S. medicae and Medicago truncatula. M. truncatula has a simpler genome than alfalfa so we could identify plant proteins based on predictions from the DNA sequence. Nodules formed on Medicago grow linearly, with the least mature tissues at the tip. Because development of nitrogen fixation is accompanied by the production of the pigmented plant oxygen carrier protein leghemoglobin, we were able to locate and manually separate the tip, transitional, and mature nitrogen-fixing regions from each other. Advances in proteomic and metabolomic techniques allowed us to analyze these tissues from a pool of as few as 10 nodules. We observed correlated transitions of various enzymes in the plant and bacterial proteomes from those characteristic of free-living metabolism to the microaerobic metabolism of the nitrogen-fixing tissues. The metabolome could not be separated into plant and bacterial domains but was consistent with this overall transition. A subsequent paper examined proteolysis in nodule bacteria. Protein turnover in mature regions of the nodule is significant. We were able to show complexes between various proteins and important proteases, using precipitation capture techniques to isolate the proteases and sensitive proteomic analysis to reveal the associated proteins.

09 BIOMASS FUELS↗

Can Simple Machine Learning Tools Extend and Improve Temperature-Based Methods to Infer Streambed Flux?

Temperature-based methods have been developed to infer 1D vertical exchange flux between a stream and the subsurface. Current analyses rely on fitting physically based analytical and numerical models to temperature time series measured at multiple depths to infer daily average flux. These methods have seen wide use in hydrologic science despite strong simplifying assumptions including a lack of consideration of model structural error or the impacts of multidimensional flow or the impacts of transient streambed hydraulic properties. We performed a “perfect-model experiment” investigation to examine whether regression trees, with and without gradient boosting, can extract sufficient information from model-generated subsurface temperature time series, with and without added measurement error, to infer the corresponding exchange flux time series at the streambed surface. Using model-generated, synthetic data allowed us to assess the basic limitations to the use of machine learning; further examination of real data is only warranted if the method can be shown to perform well under these ideal conditions. We also examined whether the inherent feature importance analyses of tree-based machine learning methods can be used to optimize monitoring networks for exchange flux inference.

54 ENVIRONMENTAL SCIENCES↗

Conclusions from 3 years of continuous capture plant operation without exchange of the AMP/PZ-based solvent at Niederaussem – insights into solvent degradation management

A many times heard mantra of solvent degradation management in amine-based post combustion capture is “keep the solvent clean” to minimize solvent consumption. It is assumed that the amine losses would decrease by the removal of metals, degradation products, and reactive trace components which are captured from the flue gas, like NO 2 (as potentially driving components of the amine degradation besides dissolved O 2 ). However, this theoretical hypothesis – based on results from laboratory experiments typically generated with fresh amines – disregards the complexity of the solvent matrix, interaction of potential metal catalysts with degradation products and oxidizing agents, and specific chemical requirements which must be fulfilled before a degradation mechanism can proceed. Degradation of the solvent CESAR1 (aqueous solution of 3.0 molar 2-amino-2-methylpropan-1-ol (AMP) and 1.5 molar piperazine (PZ)) is investigated in a unique long-time test campaign (testing time up to now 40 months; 24/7 operation) without replacement of the solvent inventory at the capture pilot plant at the lignite-fired power plant in Niederaussem. Three solvent management strategies with different effect mechanisms are investigated and evaluated: (a) removal of only anionic compounds and trace elements (within 75 days solvent inventory treated two times) and anionic as well as cationic compounds and trace elements (114 days, inventory treated four times) from the solvent by ion exchange, (b) adsorptive removal of trace elements from the solvent by active carbon in 35% of the operating time, and (c) removal of >80% NO 2 by flue gas pretreatment with thiosulfate/sulfite solution (dosing for 2,000 h). The results of the testing program clearly show that “solvent cleanliness” is not a well-defined parameter and that results from laboratory tests, tests without fully representative industrial flue gasses, and short-term testing of monoethanolamine cannot be generalized for other solvents and industrial application. Furthermore, these results showcase that specific degradation management considering solvent, capture plant and flue gas quality is reasonable. Overshooting efforts for solvent management are contra-productive and produce unnecessary waste streams, efficiency losses and costs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering an Extremely Hybrid PKS for Adipic Acid Production

Polyketide synthases (PKSs) are modular enzymes with exceptional potential as biocatalysts for producing non-native compounds. Here, we report the first PKS-based pathway for adipic acid (AA), an industrial monomer for nylon production, by engineering one of the most extensively hybridized PKS systems to date. Using a retrobiosynthetic approach, we identified EtnB, a succinyl-CoA-loading module that uniquely retains the terminal carboxyl group, enabling access to dicarboxylic polyketide products, rarely produced by canonical PKSs. EtnB was coupled to a fully reducing extension module through an engineered communication linker, which improved ACP–KS interactions, enhanced titers, and demonstrated selective succinyl-CoA loading in vivo . This construct integrates genes from five organisms─with domains from seven PKS modules joined across six non-natural junctions─and functions in both Escherichia coli and Pseudomonas putida . Additional engineering that included AT domain exchanges, optimization of extender unit supply, and host strain metabolic rewiring further increased AA production. Together, this work demonstrates that highly chimeric PKSs can be rendered functional through rational design, expands the PKS toolkit with a carboxyl-retaining loading module, and establishes a versatile platform for engineering diacids and other noncanonical products through PKS pathways.

biomanufacturing↗

Unveiling a Family of Dimerized Quantum Magnets, Conventional Antiferromagnets, and Nonmagnets in Ternary Metal Borides

Dimerized quantum magnets are exotic crystalline materials where Bose–Einstein condensation of magnetic excitations can happen. However, known dimerized quantum magnets are limited to only a few oxides and halides. Here, we unveil 9 dimerized quantum magnets and 11 conventional antiferromagnets in ternary metal borides MTB 4 (M = Sc, Y, La, Ce, Lu, Mg, Ca, and Al; T = V, Cr, Mn, Fe, Co, and Ni), where T atoms are arranged in structural dimers. Quantum magnetism in these compounds is dominated by strong antiferromagnetic (AFM) interactions between Cr (Cr and Mn for M = Mg and Ca) atoms within the dimers, with much weaker interactions between the dimers. These systems are proposed to be close to a quantum critical point between a disordered singlet spin-dimer phase, with a spin gap, and the ordered conventional Néel AFM phase. They greatly enrich the materials inventory that allows investigations of the spin-gap phase. Conventional antiferromagnetism in these compounds is dominated by ferromagnetic Mn (Fe for M = Mg and Ca) interactions within the dimers. The predicted stable and nonmagnetic (NM) YFeB 4 phase is synthesized and characterized, providing a scarce candidate to study Fe dimers and Fe ladders in borides. The identified quantum, conventional, and NM systems provide a platform with abundant possibilities to tune the magnetic exchange coupling by doping and study the unconventional quantum phase transition and conventional magnetic transitions. Finally, this work opens new avenues for studying novel magnetism in borides arising from spin dimers and establishes a theoretical workflow for future searches for dimerized quantum magnets in other families of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Observations of Surface Fluxes and Air‐Sea Exchange Coefficients in Low Winds Using a Small Uncrewed Aircraft System

In the marine boundary layer, the exchange of momentum, heat, and moisture occurs between the atmosphere and ocean. Since it is too dangerous for a crewed aircraft to fly close to the ocean surface to directly obtain these measurements, a sUAS (small Uncrewed Aircraft System) is one of the only viable options. On 24 March 2023 a Black Swift Technologies S0 sUAS was deployed from the NOAA P-3 on a calm clear day off the west coast of Florida. For 23 min at the end of the mission, the sUAS flew 8 straight line legs with an average length of 2.15 km, at roughly 10 m above the ocean surface, with wind speeds between 3.0 and 4.5 m s −1 . For the first time over the open ocean using a sUAS, the 4-Hz wind and thermodynamic data was used to calculate surface momentum flux, sensible heat flux, and latent flux using both direct covariance methods and the bulk aerodynamic formulas. Since all the flux quantities can be found using both direct and indirect methods, we are able to calculate the exchange coefficients of momentum flux (C D ), latent heat flux (C E ), and sensible heat flux (C H ) with results that are generally in good agreement with previous studies over the same wind speed range. This study demonstrates the ability of sUAS to measure air-sea interactions. Future intention is to use sUAS to obtain similar measurements in high wind events such as hurricanes which could better help understand hurricane intensification and improve model physics.

Deloach, Christopher J. [Embry-Riddle Aeronautical↗

Wannier–Koopmans method calculations for transition metal oxide band gaps

The widely used density functional theory (DFT) has a major drawback of underestimating the band gaps of materials. Wannier–Koopmans method (WKM) was recently developed for band gap calculations with accuracy on a par with more complicated methods. WKM has been tested for main group covalent semiconductors, alkali halides, 2D materials, and organic crystals. Here we apply the WKM to another interesting type of material system: the transition metal (TM) oxides. TM oxides can be classified as either with d 0 or d 10 closed shell occupancy or partially occupied open shell configuration, and the latter is known to be strongly correlated Mott insulators. We found that, while WKM provides adequate band gaps for the d0 and d10 TM oxides, it fails to provide correct band gaps for the group with partially occupied d states. This issue is also found in other mean-field approaches like the GW calculations. We believe that the problem comes from a strong interaction between the occupied and unoccupied d-state Wannier functions in a partially occupied d-state system. We also found that, for pseudopotential calculations including deep core levels, it is necessary to remove the electron densities of these deep core levels in the Hartree and exchange–correlation energy functional when calculating the WKM correction parameters for the d-state Wannier functions.

36 MATERIALS SCIENCE↗

Chiral symmetry and scale invariance breaking in spin chains

The effects of the Dzyaloshinsky-Moriya interaction on finite size one-dimensional (1D) magnetic chains are investigated as a function of their length. The magnetic configuration the system adopts for varying boundary conditions are explored analytically, which leads to the appearance of chiral configurations that play a crucial role. The coercive and exchange bias fields show an unexpected chain length dependence, caused by the boundary conditions and by chiral symmetry breaking, which in turn leads to the breakdown of scale-invariance. Our treatment yields results in agreement with experimental evidence and ongoing research on phthalocyanine iron chains bonded to hydrogen.

36 MATERIALS SCIENCE↗

Ab initio studies of the double–Gamow-Teller transition and its correlation with neutrinoless double- β decay

Here, we use chiral interactions and several ab initio methods to compute the nuclear matrix elements (NMEs) for ground-state-to-ground-state double Gamow-Teller transitions in a range of isotopes and explore the correlation of these NMEs with those for neutrinoless double beta decay produced by the exchange of a light Majorana neutrino. When all the NMEs of both isospin-conserving and isospin-changing transitions from the ab initio calculations are considered, the correlation is strong. For the experimentally relevant isospin-changing transitions by themselves, however, the correlation is weaker and may not be helpful for reducing the uncertainty in the NMEs for neutrinoless double beta decay.

20 ≤ A ≤ 38↗

The Synthetic Biology Open Language (SBOL) Version 3: Simplified Data Exchange for Bioengineering

The Synthetic Biology Open Language (SBOL) is a community-developed data standard that allows knowledge about biological designs to be captured using a machine-tractable, ontology-backed representation that is built using Semantic Web technologies. While early versions of SBOL focused only on the description of DNA-based components and their sub-components, SBOL can now be used to represent knowledge across multiple scales and throughout the entire synthetic biology workflow, from the specification of a single molecule or DNA fragment through to multicellular systems containing multiple interacting genetic circuits. The third major iteration of the SBOL standard, SBOL3, is an effort to streamline and simplify the underlying data model with a focus on real-world applications, based on experience from the deployment of SBOL in a variety of scientific and industrial settings. Here, we introduce the SBOL3 specification both in comparison to previous versions of SBOL and through practical examples of its use.

59 BASIC BIOLOGICAL SCIENCES↗