Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPECTATION VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Nationwide assessment of potential output from wind-powered generators

A method for computing the actual expected power for a wind-powered generator from a given observed speed distribution is described and applied to estimate the potential output for different locations in the continental U.S. A contour map of generator capacity factor values (fraction of the rated output realizable) is obtained for wind-powered generator systems with a cut-in speed of 3.6 m/sec and a rated speed of 8.0 m/sec, and for a unit with hypothetical values for the 1 MW class (cut-in speed, 6.7 m/sec; rated speed, 13.4 m/sec). Results indicate that in the central U.S. and in certain areas of the New England coast at a height of 61 m, over 60% of the rated output power could be obtained on an annual average. In these areas capacity factors of over 20% could be obtained with the 1MW system.

Justus, C. G.↗
NASA NTRS1977

A first-principles derivation of Doppler noise expected from solar wind density fluctuations

The level of Doppler noise (DN) expected from solar wind (SW) density fluctuations (DF) is derived beginning with the expression for refractive index variations. The calculation takes account of up and downlink paths and of the method actually used to produce the DN values. The usual assumptions that the DF are frozen in, that the large-scale radial variation can be separated from the DF, that the DF power spectrum is a power law with outer scale k sub 0 and that the DF are homogeneous on scales less than 2c delta t, delta t = sample time, are made. The result agrees quite well with previous observations of DN. Corrections for the finite number of points used in the actual algorithm are discussed.

Callahan, P. S.↗
NASA NTRS1978

Electron paramagnetic resonance studies of slowly tumbling vanadyl spin probes in nematic liquid crystals

An analysis of EPR line shapes by the method of Polnaszek, Bruno, and Freed is made for slowly tumbling vanadyl spin probes in viscous nematic liquid crystals. The use of typical vanadyl complexes as spin probes for nematic liquid crystals is shown to simplify the theoretical analysis and the subsequent interpretation. Rotational correlation times tau and orientational ordering parameters S sub Z where slow tumbling effects are expected to be observed in vanadyl EPR spectra are indicated in a plot. Analysis of the inertial effects on the probe reorientation, which are induced by slowly fluctuating torque components of the local solvent structure, yield quantitative values for tau and S sub Z. The weakly ordered probe VOAA is in the slow tumbling region and displays these inertial effects throughout the nematic range of BEPC and Phase V. VOAA exhibits different reorientation behavior near the isotropic-nematic transition temperature than that displayed far below this transition temperature.

Bruno, G. V.↗
NASA NTRS1979

The behavior of tropical ozone during the stratospheric warming of March-April 1976

The backscatter ultraviolet spectrometer on the Atmosphere Explorer-E satellite obtained ozone data for the upper stratosphere and lower mesosphere from an equatorial orbit near the time of the March-April 1976 stratospheric warming. A simple inversion technique allows the extraction of information on the absolute ozone abundance and its longitudinal variation from the measured radiances. Between altitudes of 35 and 60 km tropical O3 in constant pressure layers exhibits increased spatial variations on length scales of 20 to 30 deg in longitude after the onset of the polar warming, indicating enhanced wave activity. One week after the polar vortex breakdown, upper stratospheric O3 begins a relaxation toward the unperturbed state, while that in the lower mesosphere continues to show maximum variations near + or 10% of the longitudinally averaged value. Although the degree of horizontal structure increases during the warming, the absolute O3 amounts averaged over longitude between 35 and 60 km in altitude remain nearly constant in time. The observed behavior is consistent with that expected from enhanced vertical transport of O3 in the tropics with accompanying adiabatic temperature changes which alter the chemical loss rate.

Frederick, J. E.↗
NASA NTRS1983

Viscous flow behavior of four iron-containing silicates with alumina, effects of composition and oxidation condition

The viscosity of a magma is an important parameter in connection with its effect on geologic processes such as melt segregation, magma vesiculation, and crystal fractionation. Though most models of geologic processes assume relatively low values for the magma viscosity less than 10,000 poise, it would be useful to have an empirical model for estimating viscosities when the process occurs during continuous cooling to a temperature region where the viscosity is expected to be very high. The considered work has been carried out to provide the experimental measurements of viscosity at low temperatures which would be used in formulating the empirical model. Ten iron-containing silicate compositions have been investigated by Klein et al. (1981), and four of these compositions have been selected for the present study with alumina. The study involves substitutions of Al2O3 for FeOx at Na2O/Al2O3 moles greater than one. For the four iron-containing silicate glasses with alumina, the viscosity at a given temperature is found to increase with increasing (Fe + Al).

Klein, L. C.↗
NASA NTRS1984

Accretion disk limit cycle mechanism in twin-degenerate interacting binaries

Accretion disk instability is studied as a possible mechanism causing large variations in the optical light curves of twin-degenerate interacting binary stars. The nonthermal equilibrium limit cycle behavior of the accretion disk expected for such a binary system is explored using a generalized time-dependent, nonthermal equilibrium accretion disk model developed for the study of dwarf novae. A series of bursts is computed for a wide range of values of the secondary mass transfer rate, and the results are presented and discussed.

Cannizzo, J. K.↗
NASA NTRS1987

The effect of decay of the amplitude of oscillation on random process models for QPO X-ray stars

Random process models provide a useful mathematical framework for analysis of the quasi-periodic oscillations (QPO) recently discovered in the X-ray emission from certain luminous Galactic X-ray stars. In this paper, consideration is given to the effects of the power spectrum of the decay of the amplitude of oscillation that is expected in some physical models for the QPO phenomena. The resulting changes in the power spectrum depend on the ratio of the decay time of the amplitude of oscillation to the lifetime of the shot envelope. For values of this ratio less than about 10, it is found that incoherent QPO peaks in the power spectrum are significantly reduced in height and total power and are broadened in width, making them more difficult to detect. Coherent terms in the power spectrum, if present, are reduced in height and total power, but their width is unaffected. The red noise component remains unchanged. The present results are applied to the beat-frequency modulated accretion model in order to set constraints on the physical properties of the boundary layer between the inner edge of the accretion disk and the neutron star magnetosphere.

Shibazaki, N.↗
NASA NTRS1990

Recent results from the InP homojunction cell module on the LIPS III spacecraft

The flight performance of the NASA Lewis Research Center's indium phosphide homojunction cell module on the LIPs III spacecraft is presented. Four n+-p diffused junction cells, an early product of an InP development program, were flown. The voltage range of the data prohibits determination of the open-circuit voltage or the maximum power point. However, analysis of the 32 months of short-circuit current data reveals a slight increase, not the 4 percent decrease expected from radiation tolerance studies. This increase may be due to continual cleaning of possible prelaunch dust contamination or changes in data acquisition system calibration. For all cells, the average short-circuit current remains below prelaunch values.

Brinker, David J.↗
NASA NTRS1993

Possible solutions to the problem of channel formation on early Mars

A warm climate on early Mars would provide a natural, although not unique, explanation for the presence of fluvial networks on the ancient, heavily cratered terrains. Explaining how the climate could have been kept warm, however, is not easy. The idea that the global average surface temperature, T(sub s), could have been kept warm by a dense, CO2 atmosphere supplied by volcanism or impacts is no longer viable. It was shown that CO2 cloud formation should have kept T(sub s) well below freezing until approximately 2 b.y. ago, when the Sun had brightened to at least 86 percent of its present value. Warm equatorial regions on an otherwise cold planet seem unlikely because atmospheric CO2 would probably condense out at the poles. Warming by impact-produced dust in the atmosphere seems unlikely because the amount of warming expected for silicate dust particles is relatively small. Greenhouse warming by high altitude CO2 ice clouds seems unlikely because such are poor absorbers of infrared radiation at most wavelengths. Warming by atmospheric NH3 seems unlikely because NH3 is readily photodissociated and because N may have been in short supply as consequence of impact erosion and the high solubility of NH3. A brighter, mass-losing young Sun seems unlikely because stellar winds of the required strength were not observed on other solar-type stars. In short, most of the explanations for a warm Martian paleoclimate that were proposed in the past seem unlikely. One possibility that seems feasible from radiative/photochemical standpoint is that CH4 and associated hydrocarbon gases and particles contributed substantially to the greenhouse effect on early Mars. Methane is photochemically more stable than NH3 and the gases and particles that can be formed from it are all good absorbers of infrared radiation. The idea of a CH4-rich Martian paleoatmosphere was suggested a long time ago but has fallen out of favor because of perceived difficulties in maintaining a CH4-rich atmosphere. In particular, it is not obvious where the CH4 might come from, since volcanic gases (on Earth, at least) contain very little CH4. This difficulty could be largely overcome if early Mars was inhabited by microorganisms. Then, methanogenic bacteria living in sediments could presumably have supplied CH4 to the atmosphere in copious quantities.

Kasting, J. F.↗
NASA NTRS2000

Correlative Aspects of the Solar Electron Neutrino Flux and Solar Activity

Between 1970 and 1994, the Homestake Solar Neutrino Detector obtained 108 observations of the solar electron neutrino flux (less than 0.814 MeV). The "best fit" values derived from these observations suggest an average daily production rate of about 0.485 Ar-37 atom per day, a rate equivalent to about 2.6 SNU (solar neutrino units) or about a factor of 3 below the expected rate from the standard solar model. In order to explain, at least, a portion of this discrepancy, some researchers have speculated that the flux of solar neutrinos is variable, possibly being correlated with various markers of the solar cycle (e.g., sunspot number, the Ap index, etc.). In this paper, using the larger "standard data set," the issue of correlative behavior between solar electron neutrino flux and solar activity is re-examined. The results presented here clearly indicate that no statistically significant association exists between any of the usual markers of solar activity and the solar electron neutrino flux.

Wilson, Robert M.↗
NASA NTRS2008

Magnetic Fields in the Termination Shock, Heliosheath and Solar Wind

This paper will discuss recent magnetic field observations of the termination shock (TS), heliosheath (HSH), and supersonic solar wind (SW) made by Voyager 1 (V1) and Voyager 2 (V2). Voyager 2 crossed the TS at least 5 times at 83.7 AU and 27.5deg South heliographic latitude during 2007/242.14 to 244.80. The structure of the shock, observed on three of the crossings, was highly variable, ranging from a simple quasi-perpendicular supercritical shock to a complex profile suggesting reformation. Two merged interaction regions were observed in the SW upstream of the TS, and the magnetic field increased to relatively high values during the month prior to crossing the TS. Voyager 2 observations in the HSH will also be discussed. Voyager 1 observed a small radial gradient of the magnetic field strength B in the HSH. It is expected that B should increase from the TS to heliopause, but the available predictions of the profile are not adequate to compare with the observations. Voyager 1 has entered a unipolar region, as the heliospheric current sheet moved below the latitude of V1.

Burlaga, L. F.↗
NASA NTRS2007

Navigating the Obstacles in Science Education for School Outreach

This paper gives an overview of the education outreach initiatives that the authors have personally been involved with, their successes and shortcomings are discussed with ways to overcome the difficulties encountered. Recommendations are given on how to navigate the obstacles. Industry professionals, college professors and even church groups participate in education outreach initiatives. For a successful experience, one has to navigate through various phases of the process. The strategy is to convince stakeholders that there is value in doing the outreach activity, form a partnership with the school, circumnavigate the security and administrative procedures, and finally deliver the material to the students. Successful education outreach programs have well-defined objectives, roles and expectations. Success depends on the level of commitment of all parties involved. Taking a look at individual programs, focusing on their shortcomings and best practices, this paper serves as a compilation of useful ideas for effective science and math education outreach. Navigation techniques mentioned in this paper systematically address each obstacle encountered, making solid recommendations for the future. One of the biggest challenges is showing the direct benefits of the outreach activity to stakeholders, so they can see how they profit from sacrificing their workers as outreach mentors.

Rincon, Diana↗
NASA NTRS2013

Testing of an Annular Linear Induction Pump for the Fission Surface Power Technology Demonstration Unit

Results of performance testing of an annular linear induction pump that has been designed for integration into a fission surface power technology demonstration unit are presented. The pump electromagnetically pushes liquid metal (NaK) through a specially-designed apparatus that permits quantification of pump performance over a range of operating conditions. Testing was conducted for frequencies of 40, 55, and 70 Hz, liquid metal temperatures of 125, 325, and 525 C, and input voltages from 30 to 120 V. Pump performance spanned a range of flow rates from roughly 0.3 to 3.1 L/s (4.8 to 49 gpm), and pressure heads of <1 to 104 kPa (<0.15 to 15 psi). The maximum efficiency measured during testing was 5.4%. At the technology demonstration unit operating temperature of 525 C the pump operated over a narrower envelope, with flow rates from 0.3 to 2.75 L/s (4.8 to 43.6 gpm), developed pressure heads from <1 to 55 kPa (<0.15 to 8 psi), and a maximum efficiency of 3.5%. The pump was supplied with three-phase power at 40 and 55 Hz using a variable-frequency motor drive, while power at 55 and 70 Hz was supplied using a variable-frequency power supply. Measured performance of the pump at 55 Hz using either supply exhibited good quantitative agreement. For a given temperature, the peak in efficiency occurred at different flow rates as the frequency was changed, but the maximum value of efficiency was relative insensitive within 0.3% over the frequency range tested, including a scan from 45 to 78 Hz. The objectives of the FSP technology project are as follows:5 • Develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options. • Establish a nonnuclear hardware-based technical foundation for FSP design concepts to reduce overall development risk. • Reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates. • Generate the key nonnuclear products to allow Agency decision makers to consider FSP as a viable option for potential future flight development. The pump must be compatible with the liquid NaK coolant and have adequate performance to enable a viable flight system. Idaho National Laboratory (INL) was tasked with the design and fabrication of an ALIP suitable for the FSP reference mission. Under the program, a quarter-scale FSP technology demonstration is under construction to test the end-to-end conversion of simulated nuclear thermal power to usable electrical power intended to raise the entire FSP system to Technology Readiness Level 6. An ALIP for this TDU was fabricated under the direction of the INL and shipped to NASA Marshall Space Flight Center (MSFC) for testing at representative operating conditions. This pump was designed to meet the requirements of the TDU experiment. The ALIP test circuit (ATC) at MSFC, previously used to conduct performance evaluation on another ALIP6 was used to test the present TDU pump for the FSP Technology Development program.

Polzin, K. A.↗
NASA NTRS2018

Evolution of H2O Production in Comet C/2012 S1 (ISON) as Inferred from Forbidden Oxygen and OH Emission

We present H2O production rates for comet C/2012 S1 (ISON) derived from observations of [O I] and OH emission during its inbound leg, covering a heliocentric distance range of 1.8–0.44 AU. Our production rates are in agreement with previous measurements using a variety of instruments and techniques and with data from the various observatories greatly differing in their projected fields of view. The consistent results across all data suggest the absence of an extended source of H2O production, for example sublimation of icy grains in the coma, or a source with spatial extent confined to the dimensions of the smallest projected field of view (in this case < 1000 km). We find that ISON had an active area of around 10 sq km for heliocentric distances Rh > 1.2 AU, which then decreased to about half this value from Rh = 1.2–0.9 AU. This was followed by a rapid increase in active area at about Rh = 0.6 AU, corresponding to the first of three major outbursts ISON experienced inside of 1 AU. The combination of a detected outburst in the light curve and rapid increase in active area likely indicates a major nucleus fragmentation event. The 5–10 sq km active area observed outside of Rh = 0.6 AU is consistent with a 50–100% active fraction for the nucleus, larger than typically observed for cometary nuclei. Although the absolute value of the active area is somewhat dependent on the thermal model employed, the changes in active area observed are consistent among models. The conclusion of a 50–100+% active fraction is robust for realistic thermal models of the nucleus. However the possibility of a contribution of a spatially unresolved distribution of icy grains cannot be discounted. As our [OI]-derived H2O production rates are consistent with values derived using other methods, we conclude that the contribution of O2 photodissociation to the observed [O I] emission is at most 5–10% that of the contribution of H2O for ISON. This is consistent with the expected contribution of O2 photodissociation if O2/H2O ∼ 4%, meaning [O I] emission can still be utilized as a reliable proxy for H2O production in comets as long as O2/H2O ≲ 4%, similar to the abundance measured by the ROSINA instrument on Rosetta at comet 67P/Churyumov–Gerasimenko.

Coma↗
NASA NTRS2020

Visible-near Infrared Spectral Indices for Mapping Mineralogy and Chemistry with OSIRIS-Rex

The primary objective of the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission is to return to Eartha pristine sample of carbonaceous material from the primitive asteroid (101955) Bennu. To support compositional mapping of Bennu as part of sample site selection and characterization, we tested 95 spectral indices on visible to near infrared laboratory reflectance data from minerals and carbonaceous meteorites. Our aim was to determine which indices reliably identify spectral features of interest. Most spectral indices had high positive detection rates when applied to spectra of pure, single-component materials. The meteorite spectra have fewer and weaker absorption features and, as a result, fewer detections with the spectral indices. Indices targeting absorptions at 0.7 and 2.7–3lm, which are attributable to hydrated minerals, were most successful for the meteorites. Based on these results, we identified a set of 17 indices that are most likely to be useful at Bennu. These indices detect olivines, pyroxenes, carbonates, water/OH-bearing minerals, serpentines, ferric minerals, and organics. Particle size and albedo are known to affect band depth but had a negligible impact on interpretive success with spectral indices. Preliminary analysis of the disk-integrated Bennu spectrum with these indices is consistent with expectations given the observed absorption near 3lm. Our study prioritizes spectral indices to be used for OSIRIS-REx spectral analysis and mapping and informs the reliability of all index-derived data products, including a science value map for sample site selection.

Hannah H. Kaplan↗
NASA NTRSDate not supplied

IAC Abstract for Orbital Debris Phase II Report

Orbital debris poses a growing risk for spacecraft operations. This risk has most often been measured by proxies, like the number of debris or expected collisions, but few have attempted quantify the consequences of orbital debris or the costs and benefits of different methods to address the problem. This has made it difficult to assess the trade-offs and relative value among proposed actions for the mitigation, tracking, and remediation of debris. In March of 2023, the NASA Office of Technology, Policy, and Strategy (OTPS) took a step toward quantifying these relative values when we released Cost and Benefit Analysis of Orbital Debris Remediation. Since that time, OTPS has continued to build on this work. We have increased the fidelity of our risk model. For example, we added an ensemble of risk models that use varying assumptions of debris populations and lethality, included debris as small as 1mm, and incorporated atmospheric drag to naturally deorbit debris. We have also expanded our cost-benefit calculations to include action that mitigate and track debris, both large and small. The analysis has several important findings regarding the conditions under which debris remediation is more cost-effective than mitigation and tracking, the value of increased shielding of spacecraft and faster timelines for post-mission disposal, and how changes in the portfolio have interdependent effects. This presentation summarizes the body of work, with a particular focus on the risks and benefits to the global spacecraft population.

orbital debris↗
NASA NTRS2025

Uncertainty Quantification for Empirical X-59 Sonic Boom Loudness Levels

Estimates of the total uncertainty for empirically determined loudness levels are documented when GRS (Ground Recording System) noise monitors are used to record X 59 sonic boom waveforms. The total uncertainty is characterized by combining nine different sources of uncertainty that may affect the apparent gain of the measurement chain. These uncertainty estimates are presented as expected measurement error relative to the true loudness level, and separate error estimates are provided for eight different noise metrics in which NASA has interest. The behavior of the Perceived Level (PL) metric is studied within the report body, while the total uncertainties for the seven other noise metrics are summarized in appendices for brevity. The effects of four sources of uncertainty are estimated simply from information found on hardware specification sheets provided by the manufacturer. However, mock acoustic recordings are created to estimate the effects of other sources because those effects are expected to induce spectral coloration, so they may vary with noise metric type and sound level. These sources are not well modeled by simple gain adjustments. Importantly, measurement error is computable when processing mock recordings since the true levels are knowable, which is not the case when processing data recorded in the field. Specifically, the true levels are knowable because the components of the mock recordings are separable – e.g., loudness levels of booms can be computed with or without superimposed background noise. Mock acoustic recordings also have the benefit of allowing analysis of sonic booms from vehicles that are not yet flying, like the X-59, since the mock recordings are created by combining vehicle-specific predicted waveforms with other audio sources. The estimates of total measurement error are documented as a function of the signal-to-noise ratio (SNR) of the loudness level, where the corrected SNR is computed while accounting for the effects of the method that is used to correct for background noise contamination when computing the noise metric values. The corrected SNR calculations used here can be applied to both mock recordings and in-field measurements, so the uncertainty of in-field recordings can be found using pre-computed lookup tables that identify the relationship between metric type, corrected SNR, and the expected measurement error.

Sonic Boom↗
NASA NTRS1995

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 51: Workplace communications skills and the value of communications and information-use skills instruction: Engineering students' perspectives

Studies indicate that communications and information-related activities take up a substantial portion of an engineer's work week; therefore, effective communications and information use skills are one of the key engineering competencies that recent graduates of engineering programs are expected to possess. Feedback from industry rates communications and information use skills of entry-level engineers low. Missing from current discussions of communications and information use skills and competencies for engineering students is a clear explanation from the professional engineering community about what constitutes 'acceptable and desirable communications and information norms' within that community. To gather adequate and generalizable data about communications and information skills instruction and to provide a student perspective on the communications skills of engineers, we undertook a national study of aerospace engineering students in March 1993. The study included questions about the importance of certain communications and information skills to professional success, the instruction students had received in these skills, and perceived helpfulness of the instruction. Selected results from the study study are reported in this paper.

Pinelli, Thomas E.↗