Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Identification and Control of Gravity Related Defect Formation During Melt Growth of Bismuth-Silicate (Bi12SiO20)

In the light of strong indications that a majority of critical defects formed in bismuth silicon oxide (BSO) during growth from the melt is related directly or indirectly to gravitational interference, it is suggested to use the reduced gravity environment of outer space for experimentation directed at the identification and control of these defects. The results of these experiments are expected to lead to advances in our understanding of crystal growth related defect formation in general and will establish a basis for effective defect engineering, the approach to efficient achievement of defect related, application specific properties in opto-electronic materials

Zheng, Y.↗

Solving Upwind-Biased Discretizations: Defect-Correction Iterations

This paper considers defect-correction solvers for a second order upwind-biased discretization of the 2D convection equation. The following important features are reported: (1) The asymptotic convergence rate is about 0.5 per defect-correction iteration. (2) If the operators involved in defect-correction iterations have different approximation order, then the initial convergence rates may be very slow. The number of iterations required to get into the asymptotic convergence regime might grow on fine grids as a negative power of h. In the case of a second order target operator and a first order driver operator, this number of iterations is roughly proportional to h-1/3. (3) If both the operators have the second approximation order, the defect-correction solver demonstrates the asymptotic convergence rate after three iterations at most. The same three iterations are required to converge algebraic error below the truncation error level. A novel comprehensive half-space Fourier mode analysis (which, by the way, can take into account the influence of discretized outflow boundary conditions as well) for the defect-correction method is developed. This analysis explains many phenomena observed in solving non-elliptic equations and provides a close prediction of the actual solution behavior. It predicts the convergence rate for each iteration and the asymptotic convergence rate. As a result of this analysis, a new very efficient adaptive multigrid algorithm solving the discrete problem to within a given accuracy is proposed. Numerical simulations confirm the accuracy of the analysis and the efficiency of the proposed algorithm. The results of the numerical tests are reported.

Diskin, Boris↗

Performance, Defect Behavior and Carrier Enhancement in Low Energy, Proton Irradiated p(+)nn(+) InP Solar Cells

InP p(+)nn(+) cells, processed by MOCVD, were irradiated by 0.2 MeV protons and their performance and defect behavior observed to a maximum fluence of 10(exp 13)/sq cm. Their radiation induced degradation, over this fluence range, was considerably+less than observed for similarly irradiated, diffused junction n p InP cells. Significant degradation occurred in both the cell's emitter and base regions the least degradation occurring in the depletion region. A significant increase in series resistance occurs at the highest fluenc.e. Two majority carrier defect levels, E7 and E10, are observed by DLTS with activation energies at (E(sub C) - 0.39)eV and (E(sub C) - 0.74)eV respectively. The relative concentration of these defects differs considerably from that observed after 1 MeV electron irradiation. An increased carrier concentration in the cell's n-region was observed at the highest proton fluence, the change in carrier concentration being insignificant at the lower fluences. In agreement with previous results, for 1 and 1.5 MeV electron irradiated InP p(+)n junctions, the defect level E10 is attributed to a complex between zinc, diffused into the n-region from the zinc doped emitter, and a radiation induced defect. The latter is assumed to be either a phosphorus vacancy or interstitial. The increased, or enhanced carrier concentration is attributed to this complex acting as a donor.

Weinberg, I.↗

Process-Induced Morphological Defects in Epitaxial CVD Silicon Carbide

Silicon carbide (SiC) semiconductor technology has been advancing rapidly, but there are numerous crystal growth problems that need to be solved before SiC can reach its full potential. Among these problems is a need for an improvement in the surface morphology of epitaxial films that are grown to produce device structures. Various processes before and during epilayer growth lead to the formation of morphological defects observed in SiC epilayers grown on SiC substrates. In studies of both 6H and 4H-SiC epilayers, atomic force microscopy (AFM) and other techniques have been used to characterize SiC epilayer surface morphology. In addition to the well-known micropipe defect, SiC epilayers contain growth pits, triangular features (primarily) in 4H-SiC, and macro step due to step bunching. In work at NASA Lewis, it has been found that factors contributing to the formation of some morphological defects include: defects in the substrate bulk, defects in the substrate surface caused by cutting and polishing the wafer, the tilt angle of the wafer surface relative to the basal plane, and growth conditions. Some of these findings confirm results of other research groups. This paper presents a review of published and unpublished investigations into processes that are relevant to epitaxial film morphology.

Powell, J. A.↗

Thermographic Imaging of Defects in Anisotropic Composites

Composite materials are of increasing interest to the aerospace industry as a result of their weight versus performance characteristics. One of the disadvantages of composites is the high cost of fabrication and post inspection with conventional ultrasonic scanning systems. The high cost of inspection is driven by the need for scanning systems which can follow large curve surfaces. Additionally, either large water tanks or water squirters are required to couple the ultrasonics into the part. Thermographic techniques offer significant advantages over conventional ultrasonics by not requiring physical coupling between the part and sensor. The thermographic system can easily inspect large curved surface without requiring a surface following scanner. However, implementation of Thermal Nondestructive Evaluations (TNDE) for flaw detection in composite materials and structures requires determining its limit. Advanced algorithms have been developed to enable locating and sizing defects in carbon fiber reinforced plastic (CFRP). Thermal Tomography is a very promising method for visualizing the size and location of defects in materials such as CFRP. However, further investigations are required to determine its capabilities for inspection of thick composites. In present work we have studied influence of the anisotropy on the reconstructed image of a defect generated by an inversion technique. The composite material is considered as homogeneous with macro properties: thermal conductivity K, specific heat c, and density rho. The simulation process involves two sequential steps: solving the three dimensional transient heat diffusion equation for a sample with a defect, then estimating the defect location and size from the surface spatial and temporal thermal distributions (inverse problem), calculated from the simulations.

Plotnikov, Y. A.↗

Application of Hilbert-Huang Transform for Improved Defect Detection in Terahertz NDE of Shuttle Tiles

Terahertz NDE is being examined as a method to inspect the adhesive bond-line of Space Shuttle tiles for defects. Terahertz signals are generated and detected, using optical excitation of biased semiconductors with femtosecond laser pulses. Shuttle tile samples were manufactured with defects that included repair regions unbond regions, and other conditions that occur in Shuttle structures. These samples were inspected with a commercial terahertz NDE system that scanned a tile and generated a data set of RF signals. The signals were post processed to generate C-scan type images that are typically seen in ultrasonic NDE. To improve defect visualization the Hilbert-Huang Transform, a transform that decomposes a signal into oscillating components called intrinsic mode functions, was applied to test signals identified as being in and out of the defect regions and then on a complete data set. As expected with this transform, the results showed that the decomposed low-order modes correspond to signal noise while the high-order modes correspond to low frequency oscillations in the signal and mid-order modes correspond to local signal oscillations. The local oscillations compare well with various reflection interfaces and the defect locations in the original signal.

Anastasi, Robert F.↗

System and process for detecting and monitoring surface defects

A system and process for detecting and monitoring defects in large surfaces such as the field joints of the container segments of a space shuttle booster motor. Beams of semi-collimated light from three non-parallel fiber optic light panels are directed at a region of the surface at non-normal angles of expected incidence. A video camera gathers some portion of the light that is reflected at an angle other than the angle of expected reflectance, and generates signals which are analyzed to discern defects in the surface. The analysis may be performed by visual inspection of an image on a video monitor, or by inspection of filtered or otherwise processed images. In one alternative embodiment, successive predetermined regions of the surface are aligned with the light source before illumination, thereby permitting efficient detection of defects in a large surface. Such alignment is performed by using a line scan gauge to sense the light which passes through an aperture in the surface. In another embodiment a digital map of the surface is created, thereby permitting the maintenance of records detailing changes in the location or size of defects as the container segment is refurbished and re-used. The defect detection apparatus may also be advantageously mounted on a fixture which engages the edge of a container segment.

Mueller, Mark K.↗

Toward Intelligent Software Defect Detection

Source code level software defect detection has gone from state of the art to a software engineering best practice. Automated code analysis tools streamline many of the aspects of formal code inspections but have the drawback of being difficult to construct and either prone to false positives or severely limited in the set of defects that can be detected. Machine learning technology provides the promise of learning software defects by example, easing construction of detectors and broadening the range of defects that can be found. Pinpointing software defects with the same level of granularity as prominent source code analysis tools distinguishes this research from past efforts, which focused on analyzing software engineering metrics data with granularity limited to that of a particular function rather than a line of code.

Benson, Markland J.↗

An Experimental Investigation concerning the Effects of AFP Defects on Progressive Failure of Tensile Coupons

This paper discusses characterization approaches for the evaluation of potential defects that may occur during the automated fiber placement (AFP) process. Two nondestructive evaluation techniques were utilized simultaneously, acoustic emission (AE) and digital image correlation (DIC), to investigate correlations between mechanical properties and damage propagation during tension tests. The layup configuration is designed with the defect running across the width, and the stacking sequence with seven layers is produced: [−45/0/45/̅9̅̅0̅]s. A total of 3 panels were manufactured: one containing a gap defect in the middle layer, another one with an overlap defect, and a pristine panel for baseline comparison. Each panel accommodates six coupons having dimensions of 20” x 2”. The results indicate that defects caused during the manufacturing process affect damage initiation and growth.

Anay, Rafal↗

Density Functional Theory Calculations of Activation Energies for Non-radiative Carrier Capture by Deep Defect Levels in Semiconductors.

Carrier recombination due to defects can have a major impact on device performance. The rate of defect-induced carrier recombination is determined by both defect levels and carrier capture cross-sections. Kohn-Sham density functional theory (DFT) has been widely and successfully used to predict defect levels in semiconductors and insulators, but only recently has work begun to focus on using DFT to determine carrier capture cross-sections. Lang and Henry worked out the fundamental theory of carrier-capture cross-sections in the 1970s and showed that, in most cases, room temperature carrier-capture cross-sections differ between defects primarily due to differences in the carrier capture activation energies. Here, we present an approach to using DFT to calculate carrier capture activation energies that does not depend on perturbation theory or an assumed configuration coordinate, and we demonstrate this approach for the -3/-2 level of the Ga vacancy in wurtzite GaN.

36 MATERIALS SCIENCE↗

ADVANCED-STEM-BASED DEEP LEARNING FOR SEMANTIC SEGMENTATION OF DEFECTS IN STEELS

In this work, we developed a novel deep convolutional neural network (DCNN) model, called DefectNet, for robust and automated semantic segmentation of three crystallographic defects including line dislocations, precipitates and voids commonly observed in structural metals and alloys. In previous work, we established an experimental protocol for a diffraction contrast imaging scanning transmission electron microscopy (DCI STEM) technique and tailored it specifically for imaging defects in popular iron-based structural alloy. Thus, the DefectNet was trained over a small but high-quality DCI STEM defect image sets of a HT-9 martensitic steel before and after neutron irradiation for 111.8 dpa at 412°C. For the defect quantification that typically takes at least half an hour even for an expert, with a good model the machine learning algorithm can produce more reproducible and reliable quantification in a few seconds. This work demonstrates the feasibility of using deep learning algorithms for fast and accurate defect quantitative analysis.

Machine Learning, Radiation effects, Image analysi↗

Athermal annealing of pre-existing defects in crystalline silicon

Systematic investigations of electronic energy loss (S e ) effects on pre-existing defects in crystalline silicon (Si) are crucial to provide reliance on the use of ionizing irradiation to anneal pre-existing defects, leading to successful implementation of this technology in the fabrication of Si-based devices. In this regard, the S e effects on nonequilibrium defect evolution in pre-damaged Si single crystals at 300 K has been investigated using intermediate-energy ions (12 MeV O and Si ions) that interact with the pre-damaged surface layers of Si mainly by ionization, except at the end of their range where the nuclear energy loss (S n ) is no longer negligible. Furthermore, under these irradiation conditions, experimental results and molecular dynamics simulations have revealed that pre-existing disorder in Si can be almost fully annealed by subsequent irradiation with intermediate-energy incident ions with S e values as low as 1.5–3.0 keV/nm. Selective annealing of pre-existing defect levels in Si at room temperature can be considered as an effective strategy to mediate the transient enhanced diffusion of dopants in Si. This approach is more desirable than the regular thermal annealing, which is not compatible with the processing requirements that fall below the typical thermal budget.

36 MATERIALS SCIENCE↗

Impacts of point defects on shallow doping in cubic boron arsenide: A first principles study

Cubic boron arsenide (BAs) stands out as a promising material for advanced electronics, thanks to its exceptional thermal conductivity and ambipolar mobility. However, effective control of p- and n-type doping in BAs poses a significant challenge, mostly as a result of the influence of defects. In the present study, we employed density functional theory (DFT) to explore the impacts of the common point defects and impurities on p-type doping of Be B and Si As , and on n-type doping of Si B and Se As . We found that the most favorable point defects formed by C, O, and Si are C As , O B O As , Si As , C As Si B , and O B Si As , which have formation energies of less than 1.5 eV. While the O impurity detrimentally affects both p- and n-type dopings, C and Si impurities are harmful for n-type dopings, making n-type doping a potential challenge. Interestingly, the antisite defect pair A s B B As benefits both p- and n-type doping. Finally, the doping limitation analysis presented in this study can potentially pave the way for strategic development in the area of BAs-based electronics.

36 MATERIALS SCIENCE↗

Enhanced defect annihilation capability of the graphene/copper interface: An in situ study

It is well known that energetic heavy ion irradiations can often induce defects and ultimately lead to material degradations. Interfaces, such as high-angle grain boundaries (HAGBs), are generally used as defect sinks for alleviating the irradiation damage. However, HAGBs are often unstable during radiation. Here we investigate the interfacial irradiation responses of the graphene (Gr)/Cu composites by using in situ Kr ++ ions irradiation under transmission electron microscopy. The results revealed that the Gr/Cu interface exhibits higher defect annihilation capability compared to the HAGBs in Cu. Moreover, the atomistic simulations suggested a slightly higher and larger range of stress field for the Gr/Cu interface, which contributes to the enhanced defects absorption capability. The present findings are essential to understand and design a new class of carbon/metal composites with superior irradiation tolerance.

36 MATERIALS SCIENCE↗

Correctly Assessing Defect Tolerance in Halide Perovskites

The notion of “defect tolerance” has often been invoked to explain the excellent performance of halide perovskites in optoelectronic applications. However, this concept has not been rigorously defined or assessed. A common interpretation is that all of the energetically favorable intrinsic defects are shallow. On the basis of examples in the prototypical halide perovskite CsPbI 3 , we show that this is not the case. The antisite defects Pb I and I Pb are energetically favorable, but also have levels deep in the band gap. Still, because of strong anharmonicity, they are not efficient nonradiative recombination centers. Here, our study demonstrates how to correctly evaluate the “defect tolerance” of halide perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect Stability in CdTe Based on Formation Energies and Migration Barriers

Native point defects are thought to play a key role in CdTe, either as compensation centers in intentionally doped material, as a source of conductivity in nominally undoped material, or as electron–hole recombination centers. Here, the discussion of their concentration and impact has often centered only on formation energies and transition levels. Using hybrid density functional calculations, including the effects of spin–orbit coupling (SOC), we discuss the stability of native point defects in CdTe based on their formation energies and migration barriers. We show that although Cd interstitials are the lowest energy donor defects, they are unstable at room temperature due to a low migration barrier. They are important for maintaining charge neutrality during growth or annealing at high temperatures, but once the material is brought to room temperature, they are not frozen in as often assumed and are expected to anneal out, leaving the other more stable defects to determine the conductivity. Taking this into account in the solution of the charge neutrality equation, we are able to predict the conductivity type and carrier concentrations that are in good agreement with experimental observations.

14 SOLAR ENERGY↗

Modification of Defect Structures in Graphene by Electron Irradiation: Ab Initio Molecular Dynamics Simulations

Defects play an important role on the unique properties of the sp2-bonded materials, such as graphene. The creation and evolution of mono-vacancy, di-vacancy, Stone-Wales (SW) and grain boundaries (GBs) under irradiation in graphene are investigated using density functional theory and time-dependent density functional theory molecular dynamics simulations. It is of great interest to note that the patterns of these defects can be controlled through electron irradiation. The SW defects can be created by electron irradiation with energy of above the displacement threshold energy (Td, {approx}19 eV) and can be healed with an energy (14-18 eV) lower than Td. The transformation between four types of divacancies, V2(5-8-5), V2(555-777), V2(5555-6-7777), and V2(55-77) can be realized through bond rotation induced by electron irradiation. The migrations of divancancies, SW defects, and GBs can also be controlled by electron irradiation. Thus, electron irradiation can serve as an important tool to modify morphology in a controllable manner, and to tailor the physical properties of graphene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simple Kinetic Monte Carlo Models for Dissolution Pitting Induced by Crystal Defects

The solid-on-solid kinetic Monte Carlo model of Lasaga and Blum for dislocation- controlled etch pit growth has been extended to the growth of etch pits under the control of multiple dislocations and point defects. This has required the development of algorithms that are 0(103) – O(104) times faster than primitive kinetic Monte Carlo models for surfaces with areas in the range 1024x1024 – 4096x4096 lattice sites. Simulations with multiple line defects indicate that the surface morphology coarsens with increasing time and that the coarsening is more pronounced for large bond-breaking activation energies. For small bond breaking activation energies dissolution enhanced by line defects perpendicular the dissolving surface results in pits with steep sides terminated by deep narrow hollow tubes (nanopipes). Larger bond breaking activation energies lead to shallow pits without deep nanopipes, and if the bond breaking activation energy is large enough, step flow is the primary dissolution mechanism, and pit formation is suppressed. Simplified models that neglect the far field strain energy density but include either a rapidly dissolving core or an empty core lead to results that are qualitatively similar to those obtained using models that include the effects of the far field stress and strain. Simulations with a regular array of line defects show that microscopic random thermal fluctuations play an important role in the coarsening process.

36 MATERIALS SCIENCE↗