Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIVERSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Wave Energy Prize -- Carderock Test Design and Rigging to Accommodate Diversity of Device Types

Wave Energy Prize Carderock Test Design and Rigging to Accommodate Diversity of Device Types presentation from the Water Power Technologies Office Peer Review, FY14-FY16. The challenge was to determine testing conditions, develop processing algorithms, and execute tests for equitable and consistent evaluation of different wave energy converter (WEC) technologies.

13 HYDRO ENERGY↗

DIVERSE ENERGY STORAGE TECHNOLOGY

Behind the meter electrical energy storage in buildings as a means of peak shaving and time-of-use shifting has been demonstrated to provide utility bill savings in buildings with high electricity demand, while simultaneously relieving strain on the electric grid during peak periods. Batteries have dominated the building energy storage market but are still expensive and have a relatively short lifetime. The Ground Level Integrated Diverse Energy Storage (GLIDES) system is a newly invented electric energy storage technology which can leverage waste heat to improve its round-trip efficiency (RTE) and energy density and lifetime. It has demonstrated an RTE of 51.6% in laboratory testing, and modeled improvements demonstrate the potential for 75% RTE. This paper reports on the development of GLIDES and its potential value in buildings.

Abuheiba, Ahmad↗

Polarization diversity optical interface assembly

Examples herein relate to polarization diversity optical interface assemblies including a single mode optical fiber and first and second grating couplers disposed on a substrate. The first and second grating couplers are coupled to first and second waveguides, respectively. The assemblies further includes an optical connector to couple light between the single mode optical fiber and each of the first and second grating couplers. The optical connector includes a ferrule and a walk-off crystal. The ferrule is coupled to a portion of the single mode optical fiber. The walk-off crystal is configured to spatially separate the light into first and second orthogonal polarization modes prior to passing through the respective first and second grating couplers and/or combine the first and second polarization modes of the light prior to passing through the single mode optical fiber.

42 ENGINEERING↗

Studying Performance Portability of LAMMPS across Diverse GPU-based Platforms

The molecular dynamics simulation software, LAMMPS, utilizes the Kokkos acceleration library to port computation to a diverse set of architectures including those based on GPU accelerators. In addition to Kokkos, LAMMPS contains a vast code base that leverages the CUDA application programming interface using library functions such as cuFFT, CUDA’s fast-fourier transform (FFT) library, and, more recently, also support for AMD’s Heterogeneous Interface for Portability (HIP) that is rapidly growing. While preparing LAMMPS tests for the AMD GPU-based test system precursors to Frontier, we investigated several strategies for accelerating LAMMPS on AMD GPUs, using the AMD Instinct MI100 and MI250X. In this work, we integrated the HIP FFT library, hipFFT, into the particle-particle particle-mesh (PPPM) long-range solver, which allowed the porting of PPPM calculations to the GPUs. Kokkos behavior on the MI100 and MI250X was also investigated through the package kokkos command of LAMMPS, targeting com- munication, memory usage, and particle grid decomposition. The Tersoff, Reax, Lennard-Jones (LJ), EAM, Granular, and PPPM potentials were investigated in this effort, and results from these experiments are provided. The selected potentials were run on Spock (AMD Instinct MI100), Crusher (AMD Instinct MI250X), AFW HPC11 (NVIDIA A100) and Summit (NVIDIA V100), for comparison. Operational roofline models were constructed and analyzed for the Tersoff, Reax, and Lennard-Jones potentials on Crusher and Summit.

Hagerty, Nick↗

Greater fuel diversity needed to meet growing US electricity demand

Electricity demand is growing in the USA. One way to manage the uncertainty is to diversity fuel sources. Fuel sources include coal, natural gas, nuclear and renewable energy sources. Tables show actual and planned generation projects by fuel types. 1 fig., 2 tabs.

20 FOSSIL-FUELED POWER PLANTS↗

pH- and metal-dependent structural diversity from mononuclear to two-dimensional polymers based on a flexible tricarboxylate ligand

Six complexes based on a flexible tripodal ligand H{sub 3}TTTA (2,2',2''-[1,3,5-triazine-2,4,6-triyltris(thio)]tris-acetic acid) have been hydrothermally synthesized and structurally characterized. X-ray single-crystal diffractions reveal that they have rich structural chemistry: mononuclear, [Zn(HTTTA)(2,2'-bpy)(H{sub 2}O){sub 3}]{sub n} (1); dimeric metallamacrocycle, [Zn(HTTTA)(2,2'-bipy)(H{sub 2}O)]{sub n} (2) and [Cd(HTTTA)(2,2'-bipy)(H{sub 2}O).H{sub 2}O]{sub n} (3); two-dimensional networks with binodal (3,6)-connected CdI{sub 2} topology based on linear trinuclear M{sub 3}({mu}{sup 2}-CO{sup 2}){sub 4}({mu}{sub 2}-CO{sub 2}){sub 2} SBUs (Secondary Building Units), [M{sub 3}(TTTA){sub 2}(2,2'-bipy){sub 2}(H{sub 2}O){sub m}.nH{sub 2}O]{sub n} (M=Zn.4, m=0, n=4; Cd.5 and Mn.6, m=2; n=2). The value of pH and the metal ions has large influences on the resulting structures. The flexible tricarboxylic acid exhibits four coordination modes from monodentate to {mu}{sup 6}-bridge. Fluorescence and magnetic properties of the complexes have also been investigated in details. - Graphical abstract: Six complexes based on a flexible tricarboxylate ligand exhibit rich structural chemistry from mononuclear to 2D (3,6)-connected networks. PH and metal ions have large influences on the resulting structures. Highlights: > Six complexes based on a flexible multicarboxylate ligand have been reported. > They exhibit diverse structures from mono- and binuclear molecules to 2-D layers. > pH and metal ions have large influences on the final products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reliability enhancement of APR + diverse protection system regarding common cause failures

The Advanced Power Reactor Plus (APR +) nuclear power plant design has been developed on the basis of the APR1400 (Advanced Power Reactor 1400 MWe) to further enhance safety and economics. For the mitigation of Anticipated Transients Without Scram (ATWS) as well as Common Cause Failures (CCF) within the Plant Protection System (PPS) and the Emergency Safety Feature - Component Control System (ESF-CCS), several design improvement features have been implemented for the Diverse Protection System (DPS) of the APR + plant. As compared to the APR1400 DPS design, the APR + DPS has been designed to provide the Safety Injection Actuation Signal (SIAS) considering a large break LOCA accident concurrent with the CCF. Additionally several design improvement features, such as channel structure with redundant processing modules, and changes of system communication methods and auto-system test methods, are introduced to enhance the functional reliability of the DPS. Therefore, it is expected that the APR + DPS can provide an enhanced safety and reliability regarding possible CCF in the safety-grade I and C systems as well as the DPS itself. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of a diversity and defense-in-depth strategy for the CNNC Fuqing, Fangjiashan and Hainan nuclear plants - 379

The purpose of this paper is to provide an overview of the development of the Diversity and Defense-in- Depth (D3) strategy for the China National Nuclear Corporation Fuqing, Fangjiashan, and Hainan Nuclear Plants. The Nuclear Power Plant (NPP) Digital Control System (DCS) and advanced control room was completed by Invensys and China Nuclear Power Engineering (CNPE)/Nuclear Power Institute of China (NPIC) for these eight new Chinese built Pressurized Water Reactor plants. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Introduction of Diverse Manual Actuation Design for APR1400

APR1400 is an Advanced Light Water Reactor (ALWR) design with enhanced plant safety and advanced design features. One unit is in commercial operation and 11 are currently under construction, 4 abroad and 7 in Korea. APR1400 adopts full digitalized Man-Machine Interface System (MMIS) to perform the function of control, indication and alarming for safety and non-safety systems APR1400 MMIS is designed to operate the plant from the Main Control Room (MCR) under all anticipated operating conditions including design basis accidents. This advanced MMIS is designed to meet the latest codes, standards and regulatory requirements including the defense-in-depth and diversity requirements, which is intended to mitigate the consequence of a total failure of the digital safety system caused by a software Common Cause Failure (CCF) coupled with anyone of the Design Basis Events. The redundancy of the safety system could be defeated during this CCF condition and the protective function could be rendered inoperable.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

SEISMIC SOURCE SCALING AND DISCRIMINATION IN DIVERSE TECTONIC ENVIRONMENTS

The objectives of this study are to improve low-magnitude (concentrating on M2.5-5) regional seismic discrimination by performing a thorough investigation of earthquake source scaling using diverse, high-quality datasets from varied tectonic regions. Local-to-regional high-frequency discrimination requires an estimate of how earthquakes scale with size. Walter and Taylor (2002) developed the MDAC (Magnitude and Distance Amplitude Corrections) method to empirically account for these effects through regional calibration. The accuracy of these corrections has a direct impact on our ability to identify clandestine explosions in the broad regional areas characterized by low seismicity. Unfortunately our knowledge at small magnitudes (i.e., m{sub b} < {approx} 4.0) is poorly resolved, and source scaling remains a subject of on-going debate in the earthquake seismology community. Recently there have been a number of empirical studies suggesting scaling of micro-earthquakes is non-self-similar, yet there are an equal number of compelling studies that would suggest otherwise. It is not clear whether different studies obtain different results because they analyze different earthquakes, or because they use different methods. Even in regions that are well studied, such as test sites or areas of high seismicity, we still rely on empirical scaling relations derived from studies taken from half-way around the world at inter-plate regions. We investigate earthquake sources and scaling from different tectonic settings, comparing direct and coda wave analysis methods that both make use of empirical Green's function (EGF) earthquakes to remove path effects. Analysis of locally recorded, direct waves from events is intuitively the simplest way of obtaining accurate source parameters, as these waves have been least affected by travel through the earth. But finding well recorded earthquakes with 'perfect' EGF events for direct wave analysis is difficult, limits the number of earthquakes that can be studied. We begin with closely-located, well-correlated earthquakes. We use a multi-taper method to obtain time-domain source-time-functions by frequency division. We only accept an earthquake and EGF pair if they are able to produce a clear, time-domain source pulse. We fit the spectral ratios and perform a grid-search about the preferred parameters to ensure the fits are well constrained. We then model the spectral (amplitude) ratio to determine source parameters from both direct P and S waves. We analyze three clusters of aftershocks from the well-recorded sequence following the M5 Au Sable Forks, NY, earthquake to obtain some of the first accurate source parameters for small earthquakes in eastern North America. Each cluster contains a M{approx}2, and two contain M{approx}3, as well as smaller aftershocks. We find that the corner frequencies and stress drops are high (averaging 100 MPa) confirming previous work suggesting that intraplate continental earthquakes have higher stress drops than events at plate boundaries. We also demonstrate that a scaling breakdown suggested by earlier work is simply an artifact of their more band-limited data. We calculate radiated energy, and find that the ratio of Energy to seismic Moment is also high, around 10{sup -4}. We estimate source parameters for the M5 mainshock using similar methods, but our results are more doubtful because we do not have a EGF event that meets our preferred criteria. The stress drop and energy/moment ratio for the mainshock are slightly higher than for the aftershocks. Our improved, and simplified coda wave analysis method uses spectral ratios (as for the direct waves) but relies on the averaging nature of the coda waves to use EGF events that do not meet the strict criteria of similarity required for the direct wave analysis. We have applied the coda wave spectral ratio method to the 1999 Hector Mine mainshock (M{sub w} 7.0, Mojave Desert) and its larger aftershocks, and also to several sequences in Italy with M{approx}6 mainshocks. The Italian earthquakes have higher stress drops than the Hector Mine sequence, but lower than Au Sable Forks. These results show a departure from self-similarity, consistent with previous studies using similar regional datasets. The larger earthquakes have higher stress drops and energy/moment ratios. We perform a preliminary comparison of the two methods using the M5 Au Sable Forks earthquake. Both methods give very consistent results, and we are applying the comparison to further events.

58 GEOSCIENCES↗

Prokaryotic diversity, distribution, and insights into their role in biogeochemical cycling in marine basalts

We used molecular techniques to analyze basalts of varying ages that were collected from the East Pacific Rise, 9 oN, from the rift axis of the Juan de Fuca Ridge, and from neighboring seamounts. Cluster analysis of 16S rDNA Terminal Restriction Fragment Polymorphism data revealed that basalt endoliths are distinct from seawater and that communities clustered, to some degree, based on the age of the host rock. This age-based clustering suggests that alteration processes may affect community structure. Cloning and sequencing of bacterial and archaeal 16S rRNA genes revealed twelve different phyla and sub-phyla associated with basalts. These include the Gemmatimonadetes, Nitrospirae, the candidate phylum SBR1093 in the c, andin the Archaea Marine Benthic Group B, none of which have been previously reported in basalts. We delineated novel ocean crust clades in the gamma-Proteobacteria, Planctomycetes, and Actinobacteria that are composed entirely of basalt associated microflora, and may represent basalt ecotypes. Finally, microarray analysis of functional genes in basalt revealed that genes coding for previously unreported processes such as carbon fixation, methane-oxidation, methanogenesis, and nitrogen fixation are present, suggesting that basalts harbor previously unrecognized metabolic diversity. These novel processes could exert a profound influence on ocean chemistry.

54 ENVIRONMENTAL SCIENCES↗

Distinct CDR3 Conformations in TCRs Determine the Level of Cross-Reactivity for Diverse Antigens, But Not the Docking Orientation

T cells are known to cross-react with diverse peptide MHC Ags through their {alpha}{beta} TCR. To explore the basis of such cross-reactivity, we examined the 2C TCR that recognizes two structurally distinct ligands, SIY-K{sup b} and alloantigen QL9-L{sup d}. In this study we characterized the cross-reactivity of several high-affinity 2C TCR variants that contained mutations only in the CDR3{alpha} loop. Two of the TCR lost their ability to cross-react with the reciprocal ligand (SIY-K{sup b}), whereas another TCR (m67) maintained reactivity with both ligands. Crystal structures of four of the TCRs in complex with QL9-L{sup d} showed that CDR1, CDR2, and CDR3{beta} conformations and docking orientations were remarkably similar. Although the CDR3{alpha} loop of TCR m67 conferred a 2000-fold higher affinity for SIY-K{sup b}, the TCR maintained the same docking angle on QL9-L{sup d} as the 2C TCR. Thus, CDR3{alpha} dictated the affinity and level of cross-reactivity, yet it did so without affecting the conserved docking orientation.

36 MATERIALS SCIENCE↗

Exploratory Synthesis: The Fascinating and Diverse Chemistry of Polar Intermetallic Phases

Exploratory synthetic adventures regarding the inorganic chemistry of polar intermetallic phases have proven to be especially productive of novel compositions, new and unprecedented structures, and unusual bonding regimes. Reactions of diverse elements with widely different electronegativities allow the definition of two opposed classes of products: polycationic or polyanionic clusters or networks of metals paired with the corresponding monatomic anions or cations. These can be usefully viewed as intermetallic 'salts', redox products of simpler neutral intermetallic systems but with widely different factors governing their stabilities. Thus, combinations of rare-earth metals alone or with late transition metals form a novel variety of polymetal network structures with relatively isolated telluride (or halide) spacer anions. Similarly, extensions of traditional Zintl phases of the alkali or alkaline-earth metals from the later p elements to the earlier triels, Ga-Tl especially, yield many new and elegant polyanionic structures. The substitution or addition of still earlier p or late d metal components produces still electron-poorer and more condensed polar intermetallic phases with increasingly delocalized bonding, higher coordination numbers, and more unusual structures and bonding. These discoveries have also led to new approaches: electronic tuning via band calculations to generate new families of quasicrystals and their crystalline approximants with their characteristic structural regimes and regularities. Gold as a substituent generates particularly novel bonding in arrays of mixed metals or polygold anionic networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SPRUCE Deep Peat Microbial Diversity, CO2 and CH4 Production in Response to Nutrient, Temperature, and pH Treatments during Incubation Studies

This dataset contains the results of a microcosm incubation study on deep peat collected from the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental site within the Marcell Experimental Forest in northern Minnesota, USA in September 2014. Microcosms were monitored for carbon dioxide (CO2) and methane (CH4) production, and microbial community dynamics were assessed using quantitative polymerase chain reaction (qPCR) and amplicon sequencing. The experiment was designed with a full factorial design with elevated temperature, nitrogen (N), (P), and pH treatments was used with samples from each transect serving replicates. In all, 96 microcosms were constructed to account for the 16 treatment combinations (Nitrogen x Phosphorous x pH x temperature), 2 time points, and 3 replicates. Temperature treatments were 6 degrees C, to mimic the SPRUCE ambient plot temperatures, and 15 degrees C to mimic the SPRUCE +9 degrees C treatment. These data show that one year of deep peat warming, microbial community structure and abundance of bacterial, archaeal, fungal, and methanogenic populations showed strong vertical stratification across the peat depth profile yet no clear response to the temperature treatments (Kluber et al, 2020). In an effort to identify factors that may be limiting decomposition and microbial community change in deep peat, we conducted an anerobic microcosm incubation of deep peat (150-200 cm depth). This dataset contains one data file in comma-separate values (*.csv) format. Additional metadata are provided: a data dictionary and a file-level metadata file in comma-separate values (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗

Land-use history, fire regime, and large-mammal herbivory affect deer-preferred plant diversity in longleaf pine woodlands

Since ecological systems often experience multiple disturbances, understanding changes in important ecological interactions, such as plant-herbivore interactions, may require studies capable of disentangling the unique and interactive effects of multiple forms of disturbance. For example, understanding how mammalian herbivores affect plant communities may require understanding how widespread past disturbances, such as agricultural land use, interact with contemporary disturbances, such as prescribed fire. Here, we tested if past agricultural land use and contemporary fire regime modified the effects of mammalian herbivory on focal plant communities by measuring the richness of plant species preferred by deer at 26 longleaf pine woodlands containing paired open and large-mammal exclusion plots. Land-use history significantly affected the community composition of deer-preferred species, and focal species were 8.19 times more likely to be present in post-agricultural sites than non-agricultural sites. Large-mammal herbivory only affected plant species richness in woodlands with low fire frequencies wherein focal species were on average 2.23 times more likely to be present in exclusion plots than open plots. These results suggest that past and present disturbances can mediate contemporary plant-animal interactions and may explain spatial patterns in the intensity of large-mammal herbivory. Our findings also suggest that common management practices, such as use of prescribed burns, may indirectly promote plant species richness by reducing deer herbivory.

60 APPLIED LIFE SCIENCES↗