Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Composite particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Particle interspacing effects on the mechanical behavior of a Fe–TiB 2 metal matrix composite using FFT-based mesoscopic field dislocation mechanics

This paper presents an application to metal matrix composites (MMCs) of an enhanced elasto-viscoplastic Fast Fourier Transform (EVP-FFT) formulation coupled with a phenomenological continuum Mesoscale Field Dislocation Mechanics (MFDM) theory. Contrary to conventional crystal plasticity, which only accounts for plastic flow and hardening induced by statistically stored dislocations (SSDs), MFDM-EVP-FFT also describes the evolution of polarized geometrically necessary dislocation (GND) density and its effect on both plastic flow and hardening. Numerical results for a Fe–TiB 2 MMC made of a ferrite matrix (α-Fe) and elastic ceramic particles (TiB 2 ) are presented. Full-field simulations are performed using synthetic periodic unit cells representative of the MMC, with single-crystalline and polycrystalline matrix, for different particle interspacing distances. A strong dependence of the predicted equivalent stress, cumulated plastic strain and GND density fields with particle interspacing distance is observed, in contrast with conventional crystal plasticity. Correlations between these mechanical fields and microstructural features, and their influence on local and global mechanical behavior are examined for the different MMC microstructures.

42 ENGINEERING↗
NASA NTRS1975

The source of sublimates on the Apollo 15 green and Apollo 17 orange glass samples

Elemental analyses of the thin film of micromounds which coat the surfaces of Apollo 15 green glass and Apollo 17 orange glass are reported. It is thought that Zn, Ga, Pb, Cu, Tl, S, F, and Cl condensed as a sublimate on the outside surface of these glass particles in lava fountains about 3.4 and 3.6 b.y. ago (Apollos 15 and 17, respectively). The heavy metals enriched in these samples may have been mobilized in a halide- and sulfide-rich vapor, while the source of these elements and of the glass may be a sulfide- and halide-rich pyroxenite inside the moon. The isotopic composition of lead on the surface of individual particles was determined, and the composition is considered with respect to the evolution of the source region. The lead on the surfaces is similar to lead that has been mixed into other soils and breccias at nearby sites.

Meyer, C., Jr.↗
NASA NTRS1995

Heterogeneous Chemistry Related to Stratospheric Aircraft

Emissions from stratospheric aircraft that may directly or indirectly affect ozone include NO(y), H2O, soot and sulfuric acid. To fully assess the impact of such emissions, it is necessary to have a full understanding of both the homogeneous and heterogeneous transformations that may occur in the stratosphere. Heterogeneous reactions on stratospheric particles play a key role in partitioning ozone-destroying species between their active and reservoir forms. In particular, heterogeneous reactions tend to activate odd chlorine while deactivating odd nitrogen. Accurate modeling of the net atmospheric effects of stratospheric aircraft requires a thorough understanding of the competing effects of this activation/deactivation. In addition, a full understanding of the potential aircraft impacts requires that the abundance, composition and formation mechanisms of the particles themselves be established. Over the last three years with support from the High Speed Research Program, we have performed laboratory experiments to determine the chemical composition, formation mechanism, and reactivity of stratospheric aerosols.

Tolbert, Margaret A.↗
NASA NTRS1980

On the albedo of the interplanetary dust

The zodiacal light brightness and measured spatial density of the interplanetary dust lead to a mean geometric albedo of 0.24 for the dust particles near 1 AU; whereas the composition of collected micrometeroids suggests a geometric albedo of less than or approximately equal to 0.1. The data do not support the very low albedo (0.01 or less) proposed by Cook (1978). The evidence is against a change in the mean particle albedo between 0.1 and 2 AU. Beyond 2 AU, the data are unclear and a change in albedo is not ruled out.

Hanner, M. S.↗
NASA NTRS1983

Fracto-emission from graphite/epoxy composites

Fracto-emission (FE) is the emission of particles and photons during and following crack propagation. Electrons (EE), positive ions (PIE), and excited and ground state neutrals (NE) were observed. Results of a number of experiments involving principally graphite/epoxy composites and Kevlar single fibers are presented. The physical processes responsible for EE and PIE are discussed as well as FE from fiber- and particulate-reinforced composites.

Dickinson, J. T.↗
NASA NTRS1988

Toward a descriptive model of solar particles in the heliosphere

During a workshop on the interplanetary charged particle environment held in 1987, a descriptive model of solar particles in the heliosphere was assembled. This model includes the fluence, composition, energy spectra, and spatial and temporal variations of solar particles both within and beyong 1 AU. The ability to predict solar particle fluences was also discussed. Suggestions for specific studies designed to improve the basic model were also made.

Shea, M. A.↗
DOE OSTI2025

Effect of moisture ingression on material performance and particle generation in molten salts

This report summarizes activities conducted to understand and mitigate the negative consequences that moisture ingressions have upon the operations of pyroprocessing equipment. The objectives of the work conducted in FY25 were to characterize (1) the physicochemical properties of particles generated as a result of moisture ingressions, and (2) the corrosion of relevant structural materials with the introduction of moisture. Compositional and morphological analyses of the generated particles were conducted through a suite of characterization technologies, including X-ray diffraction, microscopy, and particle size analysis. The results gathered this year were compared to those obtained in FY24 when studies with oxygen ingressions were conducted on CeCl 3 -LiCl-KCl and UCl 3 -LiCl-KCl systems. Investigations involving performance evaluations of industrially relevant structural alloys were also conducted under moisture ingress conditions. In-line electrochemical monitoring of the bulk salt was augmented with microscopy of alloy samples to quantify the concentration and accumulation of corrosion products in the bulk salt. The results reported in this work provide a more holistic understanding of the effects of atmospheric ingressions on molten chloride salt chemistry such that effective redox control strategies may be implemented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1991

Chemical characterization of seven Large Area Collector particles by SXRF

Optical microscopy and synchrotron X-ray fluorescence (SXRF) are used to analyze the chemical composition of seven dark-appearing cosmic-dust particles obtained in the stratosphere during NASA Johnson Large Area Collector flights. The experimental setup and procedures are outlined, and the results are presented in extensive tables. Three of the particles had abundances similar to those of chondrites (except for low Ca values in one particle); two had a metallic appearance and spectra dominated by Fe and Zn; one contained Cu and Cr plus small amounts of Fe and Zn; and one had igneous-type abundances of minor and trace elements while containing all of the elements seen in chondritic particles, suggesting it may be of extraterrestrial origin.

Flynn, G. J.↗
NASA NTRS2006

Patches for Repairing Ceramics and Ceramic-Matrix Composites

Patches consisting mostly of ceramic fabrics impregnated with partially cured polymers and ceramic particles are being developed as means of repairing ceramics and ceramic-matrix composites (CMCs) that must withstand temperatures above the melting points of refractory metal alloys. These patches were conceived for use by space-suited, space-walking astronauts in repairing damaged space-shuttle leading edges: as such, these patches could be applied in the field, in relatively simple procedures, and with minimal requirements for specialized tools. These design characteristics also make the patches useful for repairing ceramics and CMCs in terrestrial settings. In a typical patch as supplied to an astronaut or repair technician, the polymer would be in a tacky condition, denoted as an A stage, produced by partial polymerization of a monomeric liquid. The patch would be pressed against the ceramic or CMC object to be repaired, relying on the tackiness for temporary adhesion. The patch would then be bonded to the workpiece and cured by using a portable device to heat the polymer to a curing temperature above ambient temperature but well below the maximum operating temperature to which the workpiece is expected to be exposed. The patch would subsequently become pyrolized to a ceramic/glass condition upon initial exposure to the high operating temperature. In the original space-shuttle application, this exposure would be Earth-atmosphere-reentry heating to about 3,000 F (about 1,600 C). Patch formulations for space-shuttle applications include SiC and ZrO2 fabrics, a commercial SiC-based pre-ceramic polymer, and suitable proportions of both SiC and ZrO2 particles having sizes of the order of 1 m. These formulations have been tailored for the space-shuttle leading-edge material, atmospheric composition, and reentry temperature profile so as to enable repairs to survive re-entry heating with expected margin. Other formulations could be tailored for specific terrestrial applications.

Hogenson, Peter A.↗
DOE OSTI2020

AA2024/SiC metal matrix composites simultaneously improve ductility and cracking resistance during elevated temperature deformation

Here this study uses the stir-casting technique to combine a semi-solid AA2024 alloy directly with finely-sized β-SiC p embedded as a powder or with mechanically alloyed granules as a delivery agent. Liquid-state primary fabrication tends to form agglomerates of reinforcement particles, whereas rolling better distributes the composite constituents. Sub-micron reinforcements of low volume fractions do not significantly increase the hardness of the composite materials. Uniaxial tensile testing at elevated temperatures over a wide range of strain rates showed simultaneous increases in the ductility and crack resistance of AA2024 + SiC p granules embedded as a powder when compared to the non-reinforced control material at lower strain rates, with the same toughness as the control material. The maximum engineering strain of 252.7 ± 19.2% was observed in AA2024/SiCp at a strain rate of 10 -4 s -1 . This improvement in properties is attributed to grain refinement in the MMCs, leading to pinning events during the straining and ductility increases. The resultant impediments to grain growth and crack propagation allow the fine-sized reinforcements to control dynamic microstructural changes during fatigue. Cube {001}<100> is a dominant texture component in AA2024, whereas the Goss {011}<100> and S {123}<634> components mainly represent the texture of the discontinuously reinforced aluminum matrix.

36 MATERIALS SCIENCE↗
NASA NTRS2014

Minerology and Crystallography of Some Itokawa Particles Returned by the Hayabusa Mission

JAXA Hayabusa mission success-fully returned particles of the asteroid Itokawa to the earth in 2010. The recovered particles were carefully studied by the preliminary examination (PE) team and the obtained results are providing significant and unique information about the formation and evolution of meteorite parent bodies [1-6]. These particles further revealed that their mineral compositions and oxygen isotopes are close to those of equilibrated LL chon-drites [1,2], which matches with the observation at the orbit [7]. After the PE, JAXA distributed the samples as international AO study and we received 4 new and 3 PE particles. The new samples may contain some exot-ic components that have not been found by the PE study, and are of special interest. We have performed a detailed mineralogical and crystallographic study on these particles and here report the results.

Mikouchi, T.↗
NASA NTRS1984

The zonally averaged circulation, temperature, and compositional structure of the lower thermosphere and variations with geomagnetic activity

A zonally averaged chemical-dynamical model of the thermosphere is used to examine the effect of high-latitude particle and Joule heating on the neutral composition, temperature, and winds at solstice for solar minimum conditions. The meridional circulation forced by solar heating alone is a summer-to-winter flow, with a winter enhancement in atomic oxygen. The high-latitude heat sources drive mean circulation cells that reinforce the solar-driven circulation in the summer hemisphere and oppose this circulation in the winter hemisphere. The changes in wind and temperature caused by the high-latitude heat sources increase the relative concentration of N2 and O2 in the high-latitude upper thermosphere and decrease the O concentration in the high-latitude lower thermosphere. For prolonged moderate levels of geomagnetic activity the peak atomic oxygen density in the polar regions can decrease by factors of 2-3 from geomagnetic quiet conditions.

Roble, R. G.↗
DOE OSTI2020

A comparative study on the physicochemical characteristics of nanoparticles released in vivo from CoCrMo tapers and cement–stem interfaces of total hip replacements

The good biocompatibility and corrosion resistance of the bulk CoCrMo alloy has resulted in it being used in the manufacture of implants and load bearing medical devices. These devices, however, can release wear and corrosion products which differ from the composition of the bulk CoCrMo alloy. The physicochemical characteristics of the particles and the associated in vivo reactivity are dictated by the wear mechanisms and electrochemical conditions at the sites of material loss. Debris released from CoCrMo hip bearings, taper junctions, or cement–stem interfaces can, therefore, have different chemical and morphological characteristics, which provide them with different in vivo toxicities. Here, we propose to assess and compare the characteristics of the particles released in vivo from CoCrMo tapers and cement–stem interfaces which have received less attention compared to debris originating from the hip bearings. The study uses state–of–art characterization techniques to provide a detailed understanding of the size, morphology, composition, and chemistry of the particles liberated from the wear and corrosion flakes from revised hip replacements, with an enzymatic treatment. The phase analyses identified Cr 2 O 3 nanoparticles released from tapers and cement–stem interfaces, whose composition did not vary with origin or particle morphology. The size distributions showed significantly smaller particles were released from the stems, compared to the particles originating from the corresponding tapers. Furthermore, the investigation demonstrates that the tribocorrosive processes occurring at the taper and stem interfaces both result in Cr 2 O 3 nanoparticle formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Atmospheric particulate measurements in Norfolk, Virginia

Characterization of atmospheric particulates was conducted at a site near the center of Norfolk, Virginia. Air quality was measured in terms of atmospheric mass loading, particle size distribution, and particulate elemental composition for a period of 2 weeks. The objectives of this study were (1) to establish a mean level of air quality and deviations about this mean, (2) to ascertain diurnal changes or special events in air quality, and (3) to evaluate instrumentation and sampling schedules. Simultaneous measurements were made with the following instruments: a quartz crystal microbalance particulate monitor, a light-scattering multirange particle counter, a high-volume air sampler, and polycarbonate membrane filters. To assess the impact of meteorological conditions on air quality variations, continuous data on temperature, relative humidity, wind speed, and wind direction were recorded. Particulate elemental composition was obtained from neutron activation and scanning electron microscopy analyses of polycarbonate membrane filter samples. The measured average mass loading agrees reasonably well with the mass loadings determined by the Virginia State Air Pollution Control Board. There are consistent diurnal increases in atmospheric mass loading in the early morning and a sample time resolution of 1/2 hour seems necessary to detect most of the significant events.

Storey, R. W., Jr.↗
DOE OSTI2022

Chemical and structural characterization of particulate fallout isolated from air-filters

We report particulate nuclear fallout is the radioactive byproduct of a nuclear event formed by the mixture of proximate environmental materials with vaporized bomb debris. The fallout debris can be transported into the atmosphere during cloud rise, raining out locally and dispersing globally constituting a radiation hazard and contributing to the distribution of anthropogenic radionuclides in the environment. Questions remain on how entrainment of environmental material in the fireball affects fallout formation processes and radionuclide incorporation and distribution during cooling. To inform the characterization of fallout including the development of fallout size distributions and how radionuclides are incorporated into fallout debris where entrainment plays a role, we analyzed an archived historic US air-filter collected by aircraft in the aftermath of ground interacting nuclear tests. Particulate fallout collected on the filter was isolated and analyzed using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and NanoSIMS (Secondary Ion Mass Spectrometry) to determine chemistry, structure, morphology, and size of the particles. Results demonstrate that the particles isolated from the filter have spherical shape, display complex internal structures, and are mainly composed of Fe and Si oxides. In these spherical particles, Pu is preferentially associated with Fe-rich composition. The characterization of fallout particulate samples can provide information on nucleation and particle growth from the vapor phase to improve modeling and simulation of fallout hazards.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Dust Direct Radiative Effect Including Large Particles and Component Minerals

The direct radiative effect (DRE) of dust aerosols in Earth system models (ESMs) remains highly uncertain, largely due to inadequate representations of particle size distribution (PSD) and mineral composition. Using NASA's Earth Surface Mineral Dust Source Investigation (EMIT) soil mineralogy data and observed PSD in an ESM that resolves dust mineral composition and emitted diameters from 0.1 to 70 μm, we find a near-neutral global dust net DRE (−0.057 W m −2 ), weaker than most previous estimates. Large dust (diameter >10 μm) contributes 30% of the global longwave dust optical depth, providing observational constraints on large-particle abundance, and offsets 20% of the dust shortwave cooling over major source regions. Incorporation of EMIT mineralogy reduces shortwave uncertainty by more than 50%. The remaining uncertainty mainly exists in processes controlling dust abundance, particularly the poorly understood transport of large dust, and longwave optical properties, which require additional observational constraints to more accurately quantify the dust DRE.

Li, Longlei [Cornell Univ., Ithaca, NY (United Sta↗