SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Prone position for whole breast irradiation (WBI) results in lower rates of toxicity and reduced ipsilateral mean lung and heart doses. No randomized trials comparing toxicity and cosmesis at 5 years with prone and supine positioning are available.
Simple intensity modulation of radiation therapy reduces acute toxicity compared with 2-dimensional techniques in adjuvant breast cancer treatment, but it remains unknown whether more complex or inverse-planned intensity modulated radiation therapy (IMRT) offers an advantage over forward-planned, 3-dimensional conformal radiation therapy (3DCRT).
Guidelines from the American Society of Clinical Oncology and Cancer Care Ontario recommend brachytherapy boost for patients with intermediate-risk or high-risk prostate cancer. SABR is an emerging technique for prostate cancer, but its use in high-risk disease is limited. Efficacy, toxic effects, and quality of life (QoL) were compared in patients treated on 2 prospective protocols that used SABR boost or magnetic resonance–guided high-dose-rate brachytherapy (HDR-BT) boost with 6 to 18 months of androgen deprivation therapy (ADT).
One of the major challenges in developing sustainable energy storage systems is to discover robust oxygen evolving catalysts (OECs) that can efficiently oxidize water and produce oxygen, electrons and protons under highly oxidizing conditions. Thus, developing new screening methodologies and practical tools for OEC discovery is essential. We report a screening protocol which allows the accurate identification, benchmarking and kinetic analysis of molecular OECs using chemical oxidants, based on an oxygen-sensitive luminescent dissolved oxygen optical probe (DOOP). To demonstrate the practicality of this protocol, we screened more than 100 reactions to benchmark and evaluate the structure-activity relationship of several transition-metal complexes 1–16 based on Ru, Fe and Cu. Water-oxidation by Ru(II)-carboxylates is compared to structurally similar and less studied Ru(II)-carboxamides. A new Ru(II) complex 6 containing the doubly deprotonated N,N'-bis(aryl)pyridine-2,6-dicarboxamide was also synthesized and its oxygen evolution rate was found to be dramatically enhanced at neutral pH.
Ethylene is one of the largest greenhouse gas emitters and the most diversly used commodity chemicals globally. Electrocatalytic reduction of CO 2 to ethylene received great attention from the research society to decarbonize the ethylene production. Here, in this study, a life-cycle analysis is conducted using the Greenhouse Gases, Regulated Emissions, and Energy use in Technologies (GREET) model on the three electrocatalytic CO 2 -reduction pathways (or “e-ethylene” pathways): i) cascade conversion via carbon monoxide intermediate; ii) single-step conversion in membrane electrode assembly (MEA); and iii) single-step conversion in alkaline flow cell. The results showed that the electricity consumption is the lowest for the cascade pathway (164 MJ/kg), thus resulting in the lowest cradle-to-gate carbon intensity [18 kgCO 2 e/kg with United States (US) average grid)] among the three pathways followed by the single-step MEA (32 kgCO 2 e/kg) and then by the single-step alkaline (56 kgCO 2 e/kg). However, all three e-ethylene pathways were significantly more carbon-intensive than their fossil-based counterpart (1.1 kgCO 2 e/kg) due to their excessive energy consumption with the current state of technology. With renewable electricity, all three pathways yielded negative carbon intensity: from -3.1 kgCO 2 e/kg to -1.6 kgCO 2 e/kg depending on the source of CO 2 . The threshold carbon intensity of electricity (TCIE), defined as the upper bound of the carbon intensity of electricity to achieve lower carbon intensity for e-ethylene compared to fossil-based ethylene, is calculated for both current and future state of e-ethylene technologies. The cascade pathway had the highest TCIE out of the three e-ethylene pathways for both current (92 gCO 2 e/kWh) and future (124 gCO 2 e/kWh) state of technologies. However, the carbon intensity of average US grid (i.e., 467 and 303 gCO 2 e/kWh for current and future projections) were higher than the TCIEs of the corresponding timeline. Thus, reducing electricity requirement for e-ethylene pathways and bringing low-carbon generation mix in the United States (US) grid faster than the current projection are both essential to decarbonize ethylene and its downstream chemicals/polymers.
There is a need for affordable housing across the U.S., with high-performance modular and prefabricated buildings providing a logical avenue for meeting some of this demand. However, there is a need to balance high performance construction – including low emissions – with affordability. To provide a proof-of-concept in meeting these goals, the Circular Home is a cross-laminated timber (CLT)-based deconstructible and reconfigurable single-family residence that meets high performance targets in moisture, energy, design, economics, and life cycle assessment (LCA). This study focuses on the LCA, presenting a cradle-to-cradle whole-building life cycle assessment (WBLCA) for the Circular Home and a functionally equivalent Baseline Home constructed with traditional materials and methods. The functional unit is 1 m 2 of gross floor area across 60 years. Revit building information models (BIM) provided material quantities and Tally LCA was utilized for impact data (inclusive of biogenic carbon sequestration), supplemented with manufacturer environmental product declarations (EPDs). The Circular Home outperforms the baseline residence in most measured impact categories, including global warming potential (GWP), producing −2.73 kgCO 2 eq/m 2 in embodied emissions, whereas the modeled baseline has an embodied GWP of 428 kgCO 2 eq/m 2 . The careful material selection and advanced building design optimizes performance, with the Circular Home containing only −0.006 times the embodied emissions and −0.02 times the operational emissions of its traditional counterpart. Finally, the unique contribution of this work is in the environmental impact comparison of a high-performance modular CLT structure that can be affordably scaled and mass produced in a U.S. market, compared to typical single family home construction.
In this study, we report the sintering of zinc oxide (ZnO) through the comparison between the hydrothermal sintering (HS) and the cold sintering process (CSP) operating in closed and open conditions, respectively. Sintering was performed at 155 ± 5 °C applying a pressure of 320 MPa, and during different holding times (0 min, 20 min, 40 min and 80 min). Whatever the low sintering process used, ceramics characteristics are almost similar in terms of relative densities and ZnO structure. However, several differences such as the nature of stabilized phases, grain sizes and quantities of residual molecules in the densified pellets, were characterized and explained. The formation of zinc acetate “bridges” was observed ex situ in hydrothermally sintered samples. Lastly, a detailed ReaxFF molecular dynamics simulation was performed to help understand the formation mechanisms of zinc acetate “bridges” and compare the chemical activities between HS and CSP.
Geothermal reservoir characterization, construction, and operations are technology-intensive activities that contribute significantly to the cost of delivering renewable electricity. The technologies involved, such as downhole tools and drilling equipment, are similar to those used in oil and gas exploration and production must often be adapted for use in the corrosive, high-temperature geothermal reservoir environment. Low production volume of geothermal tools presents a major challenge in meeting the industry's technology needs. Production of specialized tools for geothermal subsurface applications is often cost-prohibitive. Reduced inventory of subsurface well construction, characterization, and production tools causes geothermal reservoir development efficiency and sophistication to lag behind that of the oil and gas industry. Advances in additive manufacturing provide opportunities to advance geothermal technology while reducing lead time and costs associated with production of low-volume, complex parts. Additionally, this paper performs an initial techno-economic analysis comparing the cost of conventional production techniques and additive manufacturing for geothermal downhole applications. An analysis of representative downhole tools is used to create a framework for estimating fabrication costs of subtractive and additive techniques, including post-print machining required to meet final tolerances. The framework is used to explore several manufacturing scenarios and identify the dominant factors driving manufacturing time and cost. The current feasibility of additive manufacturing for geothermal downhole tool applications is assessed and issues for future development to better meet the needs of the geothermal industry are identified.
The goal of this study was to evaluate the ability of diffusion-weighted imaging (DWI) with three different b-values compared to apparent diffusion coefficient (ADC) map and fast spin echo heavily T{sub 2} weighted (FSE-HT{sub 2}W) in differential diagnosis of hemangioma from malignant liver lesions.
Despite their practical importance, atomistic modeling of B 2 O 3 containing glasses have been challenging due to the lack of reliable empirical potentials. Fortunately, a few recent developments have shown promises to simulate these glasses where the boron coordination has complex and non-linear dependence on glass composition. This work aims to provide an evaluation of the effectiveness of three recently developed potentials by a systematic study of a series (~20) of sodium borosilicate glasses with constant K (ratio of [SiO 2 ]/[B 2 O 3 ]) =2 and varying R (ratio of [Na 2 O]/[B 2 O 3 ] ranging from 0.1 to 4) values and several sodium boroaluminosilicate glasses. A comparative assessment was established on the basis of the short- and medium-range structure features, such as boron N 4 values, total correlation functions, bond angle distribution, oxygen speciation, and mechanical properties using experimental or well-established models as criteria. Furthermore, this work provides insights on the choices of empirical potentials for MD simulations of borosilicate glasses and gives directions of future potential development and refining.
Nuclear graphite and graphite matrix are both high-purity, fine-grain, graphitized materials designed for use in Fluoride-Salt Cooled High Temperature Reactors (FHRs), High Temperature Gas Cooled Reactors (HTGRs), and Molten Salt Reactors (MSRs). Their ability to chemisorb radioisotopes (such as tritium) and their chemical stability is dependent upon the density of reactive carbon sites (RCS), which varies among grades of graphite and changes with neutron irradiation. While nuclear graphites have been extensively characterized, much less data is available for graphite matrix. The current study performs a comparative analysis of IG-110 nuclear graphite and A3 graphite matrix, by X-ray Diffraction (XRD), Raman, and H 2 uptake at 700 °C with H 2 partial pressure range of 300 Pa and 22 kPa. At 10 kPa, the RCS occupied by H 2 uptake per number of carbon atoms at the edge of a crystallite, H/C edge , is 600(300) appm for IG-110 and 2300(200) appm for A3. Prior empirical studies for nuclear graphite establish a linear relationship between H/C and C edge /C and degree of graphitization. The present study shows that these correlations no longer hold when extrapolating to graphite matrix; the type of defects and the defect density at the crystallite surface are different between IG-110 and A3 due to differences in raw materials and manufacturing method.
Here, the development of next-generation sodium-cooled fast reactors necessitates comprehensive research on metallic fuels to maximize economic performance while ensuring safe operation. In this study, we investigated the steady-state irradiation behavior of two high burnup U-19Pu-10Zr fuel pins, DP-36 and DP-40, in preparation for planned safety testing. Post-irradiation examination (PIE) was performed to quantify fuel column elongation, regions of low-density at the top of the fuel column, pin deformation, fission product distribution, fractional fission gas release, microstructural evolution, and fuel constituent redistribution. Benchmarking against existing PIE data from U-19Pu-10Zr fuel pins irradiated in EBR-II revealed consistent patterns in fuel column elongation and cladding diametral strain. However, both pins exhibited longer low-density structures, and destructive examination of DP-36 revealed more complex constituent redistribution patterns compared to previously reported data for ternary fuel pins. The steady-state irradiation of both pins was also modeled using BISON. Comparisons of PIE results with modeled predictions showed overall agreement in fractional fission gas release but consistent overestimation of axial and radial swelling due to gaseous and solid swelling models. These findings underscore the critical importance of pre-test characterization on test and sibling pins to accurately capture steady-state fuel behavior ahead of transient testing, thus establishing a baseline for post-test comparison. Additionally, these analyses identified key data gaps that warrant further investigation to improve the understanding and prediction of fuel swelling, thereby enhancing the synergy between modeling and experimental efforts in supporting accident testing.
Ultra-high-temperature ceramics (UHTCs), including TiC, Ti 11 B₂, and Zr 11 B₂, show great potential for plasma-facing components due to their excellent high-temperature properties prior to irradiation. However, their response to neutron irradiation remains insufficiently understood, limiting robust assessment of their viability for fusion energy applications. Here, this study examines the thermal conductivity, dimensional stability and microstructure of TiC, TiB₂, and ZrB₂ following neutron irradiation at temperatures of 200–1000 °C and fast neutron fluences of 2.0 × 10 25 to 1.1 × 10 26 n/m 2 (E > 0.1 MeV). Lattice swelling measured by synchrotron X-ray diffraction in all three UHTCs was maximized at 200 °C and decreased with increasing irradiation temperature, with no evidence of amorphization observed at 200 °C. Above 600 °C, significant macroscopic volume swelling was observed in irradiated Ti 11 B₂ and Zr 11 B₂, but not in TiC, likely due to cavity formation in the diborides. The post-irradiation thermal conductivity, measured at the irradiation temperature, ranged from 28 to 45 W/m·K, representing a 34–45% reduction relative to the unirradiated material. Notably, neutron-irradiated UHTCs exhibit recoverable thermal conductivity at elevated temperatures, comparable to ferritic–martensitic steels and potentially superior to W when transmutation effects are considered, highlighting promise for shielding or armor plasma-facing components. At 600 °C, both thermal conductivity degradation and lattice swelling saturated at doses exceeding 2–4 dpa.
For next generation Li-ion batteries, advanced electrode materials with high energy densities are mightily important issue. Since the partial oxidation of Sn with Li 2 O to form SnO x was demonstrated upon delithiation in SnO 2 anode, the additional conversion reaction has contributed that the theoretical capacity of SnO 2 can be extended from 783 to 1494 mAh g -1 . Herein, with the design of additional conversion reaction, we discuss key factors for high electrochemical performances of the SnO 2 anodes through comparative analysis between nano-structured mesoporous SnO 2 and conventional bulk SnO 2 , based on synchrotron radiation-based techniques, quantitative analysis of extended X-ray absorption fine structure spectra, and bond strength calculation. In this way, we demonstrate that the mesoporous SnO 2 has a nano-engineering structure, inducing the facilitated electrochemical reaction and the weak Sn-O bond strength that would have an advantage in the additional conversion reaction as well as a void structure, relieving the severe volume changes during lithiation/delithiation. Consequently, excellent electrochemical performance is obtained in the mesoporous SnO 2 . Furthermore, insight from this research enables important advance in the development of metal oxide-based anode materials by making irreversible reaction reversible, providing a realizable strategy for the design and creation of high-energy storage devices.
This paper presents a review and results of comparative study of the influence of Gd on some physical properties of (R{sub 0.9}R′{sub 0.1}){sub 1−x}Gd{sub x}Co{sub 2} solid solutions with R=Dy, Ho and R′=Er, Ho and x varied from 0.05 to 0.15. Powder X-ray diffraction analysis performed at room temperature revealed that all studied solid solutions solidify with the formation of a Laves-phase MgCu{sub 2}-type structure (space group Fd−3m). The magnetization behavior and the magnetic transition are analyzed in terms of the Landau theory. The studies of magnetic properties and heat capacity showed that a relatively small Gd addition significantly increases T{sub C} of the compounds. The maximum percentage increase in T{sub C}, namely, ∼43% was observed for (Ho{sub 0.9}Er{sub 0.1}){sub 1−x}Gd{sub x}Co{sub 2}. However, the highest temperature was noted for the (Dy{sub 0.9}Ho{sub 0.1}){sub 0.85}Gd{sub 0.15}Co{sub 2} solid solution; it is T{sub C}=183.4 K. Below the ordering temperature, all samples are ferrimagnetically ordered; at high temperatures, they are Curie–Weiss paramagnets. Moreover, a small Gd addition eliminates the field-induced magnetic transition near T{sub C} and, as consequence, transforms the nature of magnetic transition from the first- to second-order. The magnetocaloric effect has been estimated in terms of both isothermal magnetic entropy and adiabatic temperature changes. The highest adiabatic temperature change ΔT{sub ad}=3 K and highest isothermal entropy change ΔS{sub mag}=12.1 J/kg K were observed for (Ho{sub 0.9}Er{sub 0.1}){sub 0.95}Gd{sub 0.05}Co{sub 2} at ∼90 K in magnetic fields of 2 T and 3 T, respectively. A decrease in the entropy change has been observed with increasing Gd content in all studied samples. The smallest values of ΔS{sub mag} were observed for the (Dy{sub 0.9}Ho{sub 0.1}){sub 1−x}Gd{sub x}Co{sub 2} solid solutions. Under an external field change of from 0 to 3 T, the maximum entropy change for (Dy{sub 0.9}Ho{sub 0.1}){sub 1−x}Gd{sub x}Co{sub 2} compounds decreases from 6.9 at x=0.05–4.3 J/kg K at x=0.15. The refrigerant capacity for all solid solutions (with 0.05≤x≤0.15) is reported. The effect of increasing Gd content in the solid solutions on their magnetic and magnetocaloric properties is discussed. - Graphical abstract: Temperature dependencies of ΔT{sub ad} induced by µ{sub 0}H=1 and 2 T in (a) (Ho{sub 0.9}Er{sub 0.1}){sub 1−x}Gd{sub x}Co{sub 2} and (b) (Dy{sub 0.9}Er{sub 0.1}){sub 1−x}Gd{sub x}Co{sub 2} solid solutions. Display Omitted.
We investigate the possibility of enhancing chemical order in the relaxor ferroelectric Na{sub 1/2}Bi{sub 1/2}TiO{sub 3} upon substitution of Na{sup +} by other monovalent cations M{sup +} using total energy calculations based on density functional theory. All chemically available monovalent cations M{sup +}, which are Li, Na, Ag, K, Tl, Rb and Cs, are considered and an analysis of the structurally relaxed structures in terms of symmetry-adapted distortion modes is given in order to quantify the chemically induced structural distortions. We demonstrate that the replacement of Na{sup +} by other monovalent cations can hardly alter the tendency of chemical order with respect to Na{sub 1/2}Bi{sub 1/2}TiO{sub 3}. Only Tl{sub 1/2}Bi{sub 1/2}TiO{sub 3} and Ag{sub 1/2}Bi{sub 1/2}TiO{sub 3} show enhanced tendency for chemical ordering. Both heavy metals behave similar to the light alkali metals in terms of structural relaxations and relative stabilities of the ordered configurations. Although a comparison of the Goldschmidt factors of components (M TiO{sub 3}){sup −} reveals for Tl a value above the upper stability limit for perovskites, the additional lone-pair effect of Tl{sup +} stabilizes the ordered structure. - Graphical abstract: Amplitudes of chemically induced distortion modes in different ordered perovskites M{sub 1/2}Bi{sub 1/2}TiO{sub 3} and visualisation of atomic displacements associated with distortion mode X{sup +}{sub 1} in the 001-ordered compounds Li{sub 1/2}Bi{sub 1/2}TiO{sub 3} and Cs{sub 1/2}Bi{sub 1/2}TiO{sub 3}. Due to a substantial size mismatch between bismuth (green) and caesium (dark blue), incorporation of the latter leads to enhanced displacements of oxygen atoms (red) and suppresses displacements of titanium (silver) as compared to lithium (light blue) or other smaller monovalent cations. - Highlights: • Lead-free A-site mixed bismuth titanates M{sub 1/2}Bi{sub 1/2}TiO{sub 3} are studied by first-principles calculations. • Investigation of chemical ordering tendency for M=Li, Na, K, Rb, Cs, Ag, and Tl. • Group theoretical analysis of different ordered structures. • Ag and Tl compounds are the most promising candidates for study of chemical order dependent ferroelectric properties.
A comparative study for hydrogen storage in metal decorated graphyne nanotubes and graphyne monolayers has been investigated within the framework of first-principle calculations. Our results show that the binding energies of Li, Ca, Sc, Ti on graphyne nanotubes are stronger than that on graphyne monolayers. Such strong binding would prevent the formation of metal clusters on graphyne nanotubes. From the charge transfer and partial density of states, it is found that the curvature effect of nanotubes plays an important role for the strong binding strength of metal on graphyne nanotubes. And the hydrogen storage capacity is 4.82 wt%, 5.08 wt%, 4.88 wt%, 4.76 wt% for Li, Ca, Sc, Ti decorated graphyne nanotubes that promise a potential material for storing hydrogen. - Graphical abstract: Metal atoms (Li, Ca, Sc and Ti) can strongly bind to graphyne nanotubes to avoid the formation of metal clusters, and a capacity of Ca@graphyne nanotube is 5.08 wt% which is close to the requirement of DOE in 2015. Twenty-four hydrogen molecules absorb to Ti-decorated graphyne nanotube. - Highlights: • The binding strength for metal on graphyne nanotubes is much stronger than that on γ-graphyne monolayer. • Metal atoms can strongly bind to the curving triangle acetylenes rings to avoid the formation of metal clusters. • A capacity of Ca@graphyne nanotube is 5.08 wt% which is close to the requirement of DOE in 2015.
Quantitative microsegregation analyses were systematically carried out during the solidification of the Ni-base superalloy CMSX-10 to clarify the methodological effect on the quantification of microsegregation and to fully understand the solidification microstructure. Three experimental techniques, namely, mushy zone quenching (MZQ), planar directional solidification followed by quenching (PDSQ), and random sampling (RS), were implemented for the analysis of microsegregation tendency and the magnitude of solute elements by electron probe microanalysis. The microprobe data and the calculation results of the diffusion field ahead of the solid/liquid (S/L) interface of PDSQ samples revealed that the liquid composition at the S/L interface is significantly influenced by quenching. By applying the PDSQ technique, it was also found that the partition coefficients of all solute elements do not change appreciably during the solidification of primary γ. All three techniques could reasonably predict the segregation behavior of most solute elements. Nevertheless, the RS approach has a tendency to overestimate the magnitude of segregation for most solute elements when compared to the MZQ and PDSQ techniques. Moreover, the segregation direction of Cr and Mo predicted by the RS approach was found to be opposite from the results obtained by the MZQ and PDSQ techniques. This conflicting segregation behavior of Cr and Mo was discussed intensively. It was shown that the formation of Cr-rich areas near the γ/γ′ eutectic in various Ni-base superalloys, including the CMSX-10 alloy, could be successfully explained by the results of microprobe analysis performed on a sample quenched during the planar directional solidification of γ/γ′ eutectic. - Highlights: • Methodological effect on the quantification of microsegregation was clarified. • The liquid composition at the S/L interface was influenced by quenching. • The segregation direction of Cr varied depending on the experimental techniques. • Cr and Mo segregation in Ni-base superalloys was fully understood.