Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Deuterium recycling and wall retention characteristics during boron powder injection in EAST

Boron (B), as a low-Z material, is widely employed for wall conditioning to enhance plasma performance in fusion devices. In the Experimental Advanced Superconducting Tokamak, a series of experiments involving real-time B powder injection has been conducted to investigate fuel particle behavior. It was observed that fuel particle recycling decreased with an increase in the amount of B powder injected, resulting in an increase in short-term fuel retention. The fuel recycling decreased by up to 80%, as indicated by divertor neutral pressure and D α line emission. Furthermore, each B atom exhibited a trapping capacity of 0.3 D particles during B powder injection at a typical flow rate. The real-time B injection had no wall hysteresis effect on D retention, implying that cumulative B injection and deposited film did not affect long-term D retention. The possible mechanism for D retention is the formation of B-C-O-D compounds and co-deposition between B and D particles during discharges. This investigation would be valuable for evaluating T retention when B is used as wall conditioning material in future fusion reactor devices.

36 MATERIALS SCIENCE↗

Correlated-Gaussian calculations of the ground and low-lying excited states of the boron atom

Benchmark variational calculations of the four lowest {sup 2}P and {sup 2}S states of the boron atom (including the ground state) have been performed. The wave functions of the states have been expanded in terms of all-particle explicitly correlated Gaussian basis functions and the finite mass of the nucleus has been explicitly accounted for. Variational upper bounds for the nonrelativistic finite- and infinite-nuclear-mass energies of all considered states have been obtained with the relative convergence of the order of 10{sup -7}-10{sup -8}. Expectation values of the powers of the inter-particle distances and Dirac {delta} functions depending on those distances have also been computed. These calculations provide reference values that can be used to test other high-level quantum chemistry methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and mechanical properties of monolayer amorphous carbon and boron nitride

Amorphous materials exhibit various characteristics that are not featured by crystals and can sometimes be tuned by their degree of disorder (DOD). Here, we report results on the mechanical properties of monolayer amorphous carbon (MAC) and monolayer amorphous boron nitride (maBN) with different DOD. The pertinent structures are obtained by kinetic-Monte-Carlo (kMC) simulations using machine-learning potentials (MLP) with density-functional-theory (DFT)-level accuracy. An intuitive order parameter, namely the areal fraction F x occupied by crystallites within the continuous random network, is proposed to describe the DOD. We find that F x captures the essence of the DOD: Samples with the same F x but different sizes and arrangements of crystallites, obtained using two distinct kMC procedures, have virtually identical radial distributions functions as well as bond-length and bond-angle distributions. Furthermore, by simulating the fracture process with molecular dynamics, we found that the mechanical responses of MAC and maBN before fracture are mainly determined by F x and are insensitive to the sizes and specific arrangements and to some extent the numbers and area distributions of the crystallites. The behavior of cracks in the two materials is analyzed and found to mainly propagate in meandering paths in the CRN region and to be influenced by crystallites in distinct ways that toughen the material. Furthermore, the present results reveal the relation between structure and mechanical properties in amorphous monolayers and may provide a universal toughening strategy for 2D materials.

2-dimensional systems↗

Superconductivity in Li-doped {alpha}-rhombohedral boron

Metal transition and superconductivity were observed in Li-doped {alpha}-rhombohedral boron ({alpha}-B{sub 12}). The authors have established a purification method and obtained a large amount of high-purity {alpha}-B{sub 12} powder. Li doping into purified {alpha}-B{sub 12} was attempted by vapor diffusion processing (VDP) in a Mo or Ta tube. Li-doped {alpha}-B{sub 12} contained metallic glittering particles. Meissner effects were observed in such a compound with the nominal composition Li{sub x}B{sub 12} (x = 1.0, 1.4, 1.5, 1.7, or 2.5) (T{sub c} = 3.2-7 K). As for Li{sub 2.5}B{sub 12}, the temperature dependence of its electrical conductivity indicates a metallic character and its electrical resistivity drop is detected near the Meissner temperature. The existence of Li and Fermi edges in Li-doped {alpha}-B{sub 12} crystals was verified by transmission electron microscopy-electron energy loss spectroscopy (TEM-EELS). Lattice expansion, which is a well-known indicator of metal doping into a crystal, was also observed. Thus, Li doping into {alpha}-B{sub 12} was successfully achieved. Our work also suggests that it is possible to dope a larger amount of Li into {alpha}-B{sub 12} and to increase its T{sub c}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Boron nitride on SiC(0001)

Here, in the field of van der Waals heterostructures, the twist angle between stacked two-dimensional layers has been identified to be of utmost importance for the properties of the heterostructures. In this context, we previously reported the growth of a single layer of unconventionally oriented epitaxial graphene that forms in a surfactant atmosphere [F. C. Bocquet et al., Phys. Rev. Lett. 125, 106102 (2020)]. The resulting G-R0° layer is aligned with the SiC lattice, and hence represents an important milestone towards high-quality twisted bilayer graphene, a frequently investigated model system in this field. Here, we focus on the surface structures obtained in the same surfactant atmosphere, but at lower preparation temperatures at which a boron nitride template layer forms on SiC(0001). In a comprehensive study based on complementary experimental and theoretical techniques, we find—in contrast to the literature—that this template layer is a hexagonal B x N y layer, but not high-quality hBN. It is aligned with the SiC lattice and gradually replaced by low-quality graphene in the 0° orientation of the B x N y template layer upon annealing.

36 MATERIALS SCIENCE↗

Boronline, a new generation of boron meter

Rolls-Royce is a global business providing integrated power systems for use on land, at sea and in the air. The Group has a balanced business portfolio with leading market positions - civil aerospace, defence aerospace, marine and energy Rolls-Royce understands the challenges of design, procurement, manufacture, operation and in-service support of nuclear reactor plants, with over 50 years of experience through the Royal Navy submarine programme. Rolls-Royce can therefore offer full product life-cycle management for new civil nuclear installations, as well as support to existing installations, including plant lifetime extensions. Rolls-Royce produced for 40 years, Instrumentation and Control (I and C) systems of and associated services for nuclear reactors in Europe, including 58 French reactors and others situated in the United States and in others countries, such as China. Rolls-Royce equipped in this domain 200 nuclear reactors in 20 countries. Among all of its nuclear systems, Rolls Royce is presenting to the conference its new generation of on-line boron measurement system, so called Boronline. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Early detection of deteriorations affecting neutrons boron detectors

The objective of these studies is to design and to industrialize a new device taking back the features of the actual system of control of boron detectors and updating them by adding some analysis of the pulses shapes for predictive maintenance. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Aluminum Boron Nitride Ferroelectric Field-Effect Transistors With ZnO Semiconductor Channel

The discovery of ferroelectricity in hafnium zirconium oxide (HfxZr 1−x O2) and related fluorite materials has spurred interest in ferroelectric devices suitable for integration with silicon integrated circuits (ICs), especially those that can be embedded in the back-end-of-line (BEOL) process. More recently, ferroelectricity has been found in wurtzite aluminum nitride-based materials, such as scandium and boron-doped aluminum nitride (Al 1−x ScxN and Al 1−x BxN). Although these materials currently have undesirably large coercive electric fields, and small breakdown electric field-to-coercive electric field ratio, their low processing temperatures and large remanent polarization offer intriguing possibilities for device applications. Furthermore, we report ferroelectric field-effect transistors (FeFETs) with a 15 nm thick Al0.88B0.12N layer and an 11 nm ZnO semiconductor channel, achieving a memory window >1 V and switching voltages ( V switch ) <±10 V.

42 ENGINEERING↗

Boron neutron capture therapy for oral precancer: proof of principle in an experimental animal model

Field-cancerized tissue can give rise to second primary tumours, causing therapeutic failure. Boron neutron capture therapy (BNCT) is based on biological targeting and would serve to treat undetectable foci of malignant transformation. The aim of this study was to optimize BNCT for the integral treatment for oral cancer, with particular emphasis on the inhibitory effect on tumour development originating in precancerous conditions, and radiotoxicity of different BNCT protocols in a hamster cheek pouch oral precancer model.

99 GENERAL AND MISCELLANEOUS↗

Comparison of beryllium oxide and pyrolytic graphite crucibles for boron doped silicon epitaxy

This article reports on the comparison of beryllium oxide and pyrolytic graphite as crucible liners in a high-temperature effusion cell used for boron doping in silicon grown by molecular beam epitaxy. Secondary ion mass spectroscopy analysis indicates decomposition of the beryllium oxide liner, leading to significant incorporation of beryllium and oxygen in the grown films. The resulting films are of poor crystal quality with rough surfaces and broad x-ray diffraction peaks. Alternatively, the use of pyrolytic graphite crucible liners results in higher quality films.

36 MATERIALS SCIENCE↗

Dry etching techniques for active devices based on hexagonal boron nitride epilayers

Hexagonal boron nitride (hBN) has emerged as a fundamentally and technologically important material system owing to its unique physical properties including layered structure, wide energy bandgap, large optical absorption, and neutron capture cross section. As for any materials under development, it is necessary to establish device processing techniques to realize active devices based on hBN. The authors report on the advancements in dry etching techniques for active devices based on hBN epilayers via inductively coupled plasma (ICP). The effect of ICP radio frequency (RF) power on the etch rate and vertical side wall profile was studied. The etching depth and angle with respect to the surface were measured using atomic force microscopy showing that an etching rate ∼1.25 μm/min and etching angles >80° were obtained. Profilometer data and scanning electron microscope images confirmed these results. This work demonstrates that SF{sub 6} is very suitable for etching hBN epilayers in RF plasma environments and can serve as a guide for future hBN device processing.

36 MATERIALS SCIENCE↗

First application of dynamic infrared imaging in boron neutron capture therapy for cutaneous malignant melanoma

Purpose: The purpose of this study is to assess the potential of dynamic infrared imaging (DIRI) as a functional, noninvasive technique for evaluating the skin acute toxicity and tumor control within the framework of the Argentine boron neutron capture therapy (BNCT) program for cutaneous malignant melanoma. Methods: Two patients enrolled in the Argentine phase I/II BNCT clinical trial for cutaneous malignant melanoma were studied with DIRI. An uncooled infrared camera, providing a video output signal, was employed to register the temperature evolution of the normal skin and tumor regions in patients subjected to a mild local cooling (cold stimulus). In order to study the spatial correlation between dose and acute skin reactions, three-dimensional representations of the superficial dose delivered to skin were constructed and cameralike projections of the dose distribution were coregistered with visible and infrared images. Results: The main erythematous reaction was observed clinically between the second and fifth week post-BNCT. Concurrently, with its clinical onset, a reactive increase above the basal skin temperature was observed with DIRI in the third week post-BNCT within regions that received therapeutic doses. Melanoma nodules appeared as highly localized hyperthermic regions. 2 min after stimulus, these regions reached a temperature plateau and increased in size. Temperature differences with respect to normal skin up to 10 deg. C were observed in the larger nodules. Conclusions: Preliminary results suggest that DIRI, enhanced by the application of cold stimuli, may provide useful functional information associated with the metabolism and vasculature of tumors and inflammatory processes related to radiation-induced changes in the skin as well. These capabilities are aimed at complementing the clinical observations and standard imaging techniques, such as CT and Doppler ultrasound.

61 RADIATION PROTECTION AND DOSIMETRY↗

SU-F-T-183: Design of a Beam Shaping Assembly of a Compact DD-Based Boron Neutron Capture Therapy System

Purpose: To design a beam shaping assembly (BSA) to shape the 2.45-MeV neutrons produced by a deuterium-deuterium (DD) neutron generator and to optimize the beam output for boron neutron capture therapy of brain tumors Methods: MCNP is used for this simulation study. The simulation model consists of a neutron surface source that resembles an actual DD source and is surrounded by a BSA. The neutron source emits 2.45-MeV neutrons isotropically. The BSA is composed of a moderator, reflector, collimator and filter. Various types of materials and geometries are tested for each component to optimize the neutron output. Neutron characteristics are measured with an 2×2×2-cm{sup 3} air-equivalent cylinder at the beam exit. The ideal BSA is determined by evaluating the in-air parameters, which include epithermal neutron per source neutron, fast neutron dose per epithermal neutron, and photon dose per epithermal neutron. The parameter values are compared to those recommended by the IAEA. Results: The ideal materials for reflector and thermal neutron filter were lead and cadmium, respectively. The thickness for reflector was 43 cm and for filter was 0.5 mm. At present, the best-performing moderator has 25 cm of AlF{sub 3} and 5 cm of MgF{sub 2}. This layout creates a neutron spectrum that has a peak at approximately 10 keV and produces 1.35E-4 epithermal neutrons per source neutron per cm{sup 2}. Additional neutron characteristics, fast neutrons per epithermal neutron and photon per epithermal neutron, are still under investigation. Conclusion: Working is ongoing to optimize the final layout of the BSA. The neutron spectrum at the beam exit window of the final configuration will have the maximum number of epithermal neutrons and limited photon and fast neutron contaminations within the recommended values by IAEA. Future studies will also include phantom experiments to validate the simulation results.

07 ISOTOPE AND RADIATION SOURCES↗

The Luminescence and Photochemical Behavior of Boron Difluoride Ketoiminates

The photochemical behavior of boron difluoride 3-amino-1-phenyl-2-buten-1-one (I) and 3-methylamino-1-phenyl-2-buten-1-one (II) in polyethylene (PE) is comparatively studied. It is found that the photochemical behavior strongly depends on the crystal structure of complexes. UV irradiation of complex I in PE leads to luminescence quenching due to photodimerization. In samples kept in the dark, photodimers dissociate, which leads to an increase in the luminescence intensity of compound I compared to initial nonirradiated samples. In contrast to compound I, photolysis of II in PE revealed no noticeable changes in the luminescence intensity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural characteristics of the boron nitride sphalerite modification synthesized in a shock wave

The real structure of ultradispersed powders of sphalerite boron nitride synthesized under shock compression has been studied by X-ray diffraction. The lattice microstrain ( {sup 1/2}) and average sizes of coherent-scattering regions were determined from the shape of one diffraction line by the method of restricted moments. It is established that the investigated powders are characterized by the values {sup 1/2} in the range 0.8-1.5% and sizes of coherent-scattering regions are from 3.6 to 7.2 nm; these data are consistent with the average sizes of crystalline grains found by electron microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of boron nitride nanotubes

The crystallographic structure of boron nitride nanotubes has been investigated. Various defects that may arise during nanotube synthesis are revealed by electron microscopy. Nanotubes with different numbers of walls and different diameters are modeled by molecular dynamics methods. Structural features of single-wall nanotubes are demonstrated. The causes of certain defects in multiwall nanotubes are indicated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stopping characteristics of boron and indium ions in silicon

The mean range and its standard deviation are calculated for boron ions implanted into silicon with energies below 10 keV. Similar characteristics are calculated for indium ions with energies below 200 keV. The obtained results are presented in tabular and graphical forms. These results may help in the assessment of conditions of production of integrated circuits with nanometer-sized elements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Neutron-beam-shaping assembly for boron neutron-capture therapy

A neutron-beam-shaping assembly consisting of a moderator, a reflector, and an absorber is used to form a therapeutic neutron beam for the boron neutron-capture therapy of malignant tumors at accelerator neutron sources. A new structure of the moderator and reflector is proposed in the present article, and the results of a numerical simulation of the neutron spectrum and of the absorbed dose in a modified Snyder head phantom are presented. The application of a composite moderator and of a composite reflector and the implementation of neutron production at the proton energy of 2.3MeV are shown to permit obtaining a high-quality therapeutic neutron beam.

43 PARTICLE ACCELERATORS↗