Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BRITTLENESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Simulating the Fracture of Notched Mortar Beams through Extended Finite-Element Method and Peridynamics

This paper simulates fracture in notched mortar beams under three-point bending using extended finite element method (XFEM) and peridynamics. A three-phase microstructure (i.e., cement paste, aggregates, and paste-aggregate interface) is used for constitutive modeling of the mortar to obtain the elastic properties for simulation. In the XFEM approach, the simulated homogenized elastic modulus is used along with the total fracture energy of the cement mortar in a damage model to predict the fracture response of the mortar including crack propagation and its fracture parameters (Mode I stress intensity factor, K IC and critical crack tip opening displacement, CTOD C ). The damage model incorporates a maximum principal stress-based damage initiation criteria and a traction-separation law for damage evolution. In the peridynamics approach, a bond-based model involving a prototype microelastic brittle (PMB) material model is used. The elastic properties and fracture energy release rates are used as inputs in the PMB model, along with the choice of peridynamic horizon size. Comparison with experimental fracture properties ( K IC , CTOD C ) as well as crack propagation paths from digital image correlation show that both the approaches yield satisfactory results, particularly for K IC and crack extension. Furthermore, both these methods can be adopted for fracture simulation of cement-based materials.

42 ENGINEERING↗

Mechanical behavior of gallium nitride nanotubes under combined tension-torsion: An atomistic simulation

The tensile mechanical behavior of single crystalline gallium nitride (GaN) nanotubes under combined tension-torsion is investigated using molecular dynamics simulations with an empirical potential. The simulation results show that a small torsion rate (<0.010° ps-1) does not affect the tensile behavior of GaN nanotube, i.e. the nanotubes show brittle properties at low temperatures; whereas at high temperatures, they behave as ductile materials. However, the failure stress decreases with increasing rate of torsion above 0.010° ps-1, and the nanotube fails in a different manner. The torsion rate has no effect on the elastic properties of GaN nanotubes.

36 MATERIALS SCIENCE↗

Oxygen effects on plastic deformation of a Zr-based bulk metallic glass

Starting with Zr of two different purities, Zr-based bulk metallic glasses (BMGs) with a nominal composition of Zr{sub 62}Cu{sub 15.5}Ni{sub 12.5}Al{sub 10} were prepared having oxygen concentrations of about 3900 and 920 at. ppm, respectively. Uniaxial compression tests showed that the BMG containing the higher level of oxygen has a higher yield strength and is capable of undergoing much less plastic deformation than that containing the lower level of oxygen. It appears that oxygen suppresses the formation of multiple shear bands but leads to an inability to sustain shear-band propagation, thus, changing the failure mode from relatively ductile to catastrophic brittle fracture.

36 MATERIALS SCIENCE↗

Failure and penetration response of borosilicate glass during short-rod impact

The failure characterization of brittle materials like glass is of fundamental importance in describing the penetration resistance against projectiles. A critical question is whether this failure front remains 'steady' after the driving stress is removed. A test series with short gold rods (D = 1 mm, L/D{approx_equal}5-11) impacting borosilicate glass at {approx}1 to 2 km/s was carried out to investigate this question. The reverse ballistic method was used for the experiments, and the impact and penetration process was observed simultaneously with five flash X-rays and a 16-frame high-speed optical camera. Very high measurement accuracy was established to ensure reliable results. Results show that the failure front induced by rod impact and penetration does arrest (ceases to propagate) after the rod is totally eroded inside the glass. The impact of a second rod after a short time delay reinitiates the failure front at about the same speed.

36 MATERIALS SCIENCE↗

Determination of simple constitutive models for borosilicate glass using penetration-velocity data from ballistic experiments

Constitutive models for brittle materials such as glass can be very complex as they are dependent on strains, strain rates, pressures, temperatures, damage and other parameters. There may also be significant (pressure-dependent) strength after failure such that the constitutive response is much different for intact material and failed material. A large number of laboratory tests is required to develop a comprehensive constitutive model. Another approach is to develop simple models by using penetration-velocity data obtained from ballistic experiments. Here various functional forms of simple models (with a limited number of constants) can be used to (computationally) match the penetration velocity over a range of impact velocities. This allows for the determination of the most important parameters and it provides an approximation of the stresses that occur during penetration. This article presents several simple computational models for borosilicate glass, including single-state models and dual-state models (that include an intact strength and a failed strength)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and magnetic properties of ball-milled Ni{sub 11}Co{sub 11}Fe{sub 66}Zr{sub 7}B{sub 4}Cu powders

Thick films of the Ni{sub 11}Co{sub 11}Fe{sub 66}Zr{sub 7}B{sub 4}Cu composition were synthesized via screen printing of the ball-milled ribbons of the above composition for possible use as planar inductors. The ribbons were obtained by rapid solidification. The resulting ribbon samples were annealed at 300 deg. C for 2 h to cause embrittlement. They were found to have soft magnetic properties (4{pi}M{sub s}{approx}13 kG, {delta}H{approx}100 Oe, and H{sub c}<0.5 Oe). The brittle ribbons were ball milled using tungsten carbide vials and stainless steel balls in an inert atmosphere for various milling times. The sample milled for 10 h was found to have a 4{pi}M{sub s} of about 13 kG and a coercivity of about 73 Oe with an average particle size of about 5 {mu}m. The screen printed (as prepared and aligned) samples showed a linewidth ({delta}H) of about 1000 Oe. Similar values were obtained for screen printed films annealed for 1 h at 200 and 400 deg. C.

36 MATERIALS SCIENCE↗

Lunar Nuclear Power Plant With Solid Core Reactor, Heatpipes and Thermoelectric Conversion

This is a lunar nuclear power plant with the advantages of minimum mass, with no moving parts, no pumped liquid coolant, a solid metal rugged core, with no single point of failure. The electrical output is 100 kilowatts with a 500 kilowatt thermal reactor. The thermoelectric converters surround the potassium heatpipes from the core and water heatpipes surround the converter and connect to the radiator. The solid core reactor is made from HT9 alloy. The fuel is uranium oxide with 90% enrichment. The thermoelectric converter is bonded to the outside of the 1.10 inch ID heat pipe and is 30 inches long. The thermoelectric couple is Si/SiGe-Si/SiC Quantum Well with over 20% efficiency with an 890 K hot side and a 490 K cold side and produces 625 Watts. 176 converters produce 110 kWe. With less than 10% loss in controls this yields 100 kWe for use. The cylindrical thermoelectric converter is designed and fabricated by HIPing to keep brittle materials in compression and to ensure conductivity. The solid core is fabricated by machining the heatpipe tubes with 6 grooves that are diffusion bonded together by HIPing to form the fuel tubes. The maximum temperature of the heat pipes is 940 K and the return flow temperature is 890 K. The reactor core is hexagonal shaped, 61 cm. wide and 76.2 cm high with 12 rotating control drums surrounding it. There is shielding to protect components and human habitation. The radiator is daisy shaped at 45 degrees with each petal 5.5 meters long. The design life is ten years.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Analytical Model for Thermal Elastoplastic Stresses of Functionally Graded Materials

A modification analytical model is presented for the thermal elastoplastic stresses of functionally graded materials subjected to thermal loading. The presented model follows the analytical scheme presented by Y. L. Shen and S. Suresh [6]. In the present model, the functionally graded materials are considered as multilayered materials. Each layer consists of metal and ceramic with different volume fraction. The ceramic layer and the FGM interlayers are considered as elastic brittle materials. The metal layer is considered as elastic-perfectly plastic ductile materials. Closed-form solutions for different characteristic temperature for thermal loading are presented as a function of the structure geometries and the thermomechanical properties of the materials. A main advance of the present model is that the possibility of the initial and spread of plasticity from the two sides of the ductile layers taken into account. Comparing the analytical results with the results from the finite element analysis, the thermal stresses and deformation from the present model are in good agreement with the numerical ones.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PROPERTIES OF SOME TOUGHENED, RADIATION STABLE EPOXY RESINS

Impregnating resins for use in fusion magnet technology are required to be radiation stable, have a long useable life together with some degree of toughness to minimise the risk of cracking during cool-down. Some multi-functional resins in combination with solid aromatic amines have, in the past, been shown to have lost little of their strength after a total absorbed dose of 200 MGy. Using resins that are known to be radiation stable with a liquid aromatic amine hardener, the effect of adding an aromatic epoxy resin as a reactive 'toughening agent,' to improve the toughness of otherwise brittle resins has been assessed. Boron free glass composites, using various amounts of added toughening agent were prepared by vacuum impregnation and a number of critical composite properties have been measured, at room temperature and at 77 K.

36 MATERIALS SCIENCE↗

NEW INSULATION APPLICATION PROCESS FOR WIND-AND-REACT MAGNET FABRICATION

Wind-and-react processes offer a cost-effective means of fabricating large-scale Nb{sub 3}Sn magnets, while also eliminating the need to manipulate the brittle superconductor after the high-temperature reaction process. Composite Technology Development, Inc. (CTD) has developed a hybrid inorganic/organic insulation system that can be co-processed with the Nb{sub 3}Sn magnet at elevated temperatures. In this work, a new process was demonstrated for applying a thin, ceramic-based insulation that is compatible with wind-and-react processing. The insulation was applied to Rutherford cables using a continuous manufacturing process, and cable assemblies (i.e., 10-stacks) were fabricated and tested. The results of this work show that the insulation possesses a high strain tolerance, as well as the dielectric strength and fatigue resistance needed for high-field magnet applications.

36 MATERIALS SCIENCE↗

Enhanced active piezoelectric 0-3 nanocomposites fabricated through electrospun nanowires

The use of monolithic piezoceramic materials in sensing and actuation applications has become quite common over the past decade. However, these materials have several properties that limit their application in practical systems. These materials are very brittle due to the ceramic nature of the monolithic material, making them vulnerable to accidental breakage during handling and bonding procedures. In addition, they have very poor ability to conform to curved surfaces and result in large add-on mass associated with using a typically lead-based ceramic. These limitations have motivated the development of alternative methods of applying the piezoceramic material, including piezoceramic fiber composites and piezoelectric 0-3 composites (also known as piezoelectric paint). Piezoelectric paint is desirable because it can be spayed or painted on and can be used with abnormal surfaces. However, the piezoelectric paint developed in prior studies has resulted in low coupling, limiting its application. In order to increase the coupling of the piezoelectric paint, this effort has investigated the use of piezoelectric nanowires rather than spherical piezoelectric particle, which are difficult to strain when embedded in a polymer matrix. The piezoceramic wires were electrospun from a barium titanate (BaTiO{sub 3}) sol gel to produce fibers with 500-1000 nm diameters and subsequently calcinated to acquire perovskite BaTiO{sub 3}. An active nanocomposite paint was formed using the resulting piezoelectric wires and was compared to the same paint with piezoelectric nanoparticles. The results show that the piezoceramic wires produce 0-3 nanocomposites with as high as 300% increase in electromechanical coupling.

36 MATERIALS SCIENCE↗

Experimental and Numerical Assessment of a New Alternative of RBS Moment Connection

Reduced beam section (RBS) connection has been known as a famous connection for steel moment-resisting seismic frames in high-rise buildings, because of their economical advantages and seismic ductility. In the ordinary RBS connection, often portions of the beam flanges are selectively trimmed in the region adjacent to the beam-to-column connection, and beam section is weakened in the plastic hinge region; section weakening concept in the plastic hinge region of beam cause to reduction of beam plastic section modulus in this region, and force plastic hinge to occur within the reduced section.This paper presents a new alternative of RBS connection that has been used aforesaid weakening concept in it, with this difference that corrugated steel plate webs instead of beam flange cutting has been used in limited specific length near the column face. Corrugated steel plates because of their accordion effect don't have bending rigidity, then using of these plates in plastic hinge region reduces the beam plastic section modulus and plastic hinge is formed in corrugated region. For investigating the seismic behavior and performance of new RBS moment connection, experimental specimen of new RBS connection were subjected to cyclic load, and finite element analysis were executed. The result of cyclic test and numerical analysis specified that the corrugated webs improved the plastic stability and provided capability of large plastic rotation at the plastic hinge location without any appreciable buckling and brittle fractures in this region. The test observations also showed that the specimens' plastic rotations exceeded 0.04 rad without any local and global buckling. All of the analytical results for proposed connection are generally in good agreement with the test observations.

58 GEOSCIENCES↗

Seismic Behavior and Retrofit of Concrete Columns of Old R.C. Buildings Reinforced With Plain Bars

Seismic rehabilitation of old buildings has been a major challenge in recent years. The first step in seismic rehabilitation is evaluation of the existing capacity and the seismic behaviour. For investigation of the seismic behaviour of RC members of a real old building in Iran which has been designed and constructed by European engineers in 1940, three half-scale column specimens reinforced with plain bars have been tested. The tests indicate significant differences between the responses of specimens reinforced by plain bars relative to those reinforced by deformed bars. A regular pattern of cracking and a relatively brittle behaviour was observed while a relatively large residual strength appeared after sudden drop of initial strength and stiffness due to slip of longitudinal bars.

58 GEOSCIENCES↗

System Identification of Burbank Six-Story Building Using Earthquake Data

This paper examines the problem of identifying the dynamic characteristics of an instrumented building using an input-output system identification method. The building studied was a six-story steel moment-resisting frame (SMRF) instrumented by the California Strong Motion Instrumentation Program (CSMIP). The building was shaken by several earthquakes and strong motion data of the building response was recorded during these earthquakes and were made available through SMIP. In particular the Whittier Narrows (October, 1987), the Sierra Madre (June, 1991) and the Northridge (January, 1994) earthquakes were considered in the studies reported here. The seismic performance of steel moment-framed buildings has been of particular interest after the 1994 Northridge earthquake because brittle fractures were discovered at the beam-column connection. The Eigensystem Realization Algorithm with Data Correlation (ERA/DC) and Observer/Kalman filter Identification (OKID) were used in these studies for system identification purposes. The identified modal properties of the structure were compared and verified with the spectral analysis of the response of the structure excited by three different earthquakes.

58 GEOSCIENCES↗

Case Study of Expected Seismic Performance of an Instrumented Steel Moment Frame Building

A relevant number of modern welded steel structures suffered unexpected damage during the January 1994 Northridge earthquake. The damage of welded special moment resisting frames (W-SMRJF) typically involved the brittle fracture in the welded girder to column connection areas. In the aftermath of the Northridge earthquake the research and structural engineering communities addressed the issue of the seismic safety of damaged and undamaged W-SMRF's. However, even though seismic design codes in the United States were significantly revised after the Northridge quake, still there are hundreds of existing W-Serf's in the US and in other countries, designed and detailed according to pre-Northridge criteria. This work is a case study on seismic response of a W-SMRF instrumented by the California Strong Motion Instrumentation Program (CSMIP) which was shaken during the 1987 Whittier, 1991 Sierra Madre and 1994 Northridge earthquakes. A detailed finite element model of the structure is developed to analyze the building dynamic response during recorded strong motions. Model accuracy was assessed by comparing prediction of the analytical model with actual CSMIP response records. In order to assess its vulnerability in response to future and possibly stronger earthquakes, nonlinear analyses were conducted subjecting the model to the Newhall and Sylmar records of the 1994 Northridge and to the 1995 Kobe earthquakes. Analysis results show that the structure behaved linearly during these earthquakes. The predicted response to larger and more severe ground motions show that plastic deformation occur at many column ends and inelastic deformation demands exceed the expected capacity of the welded pre-Northridge beam-to-column connections.

58 GEOSCIENCES↗

Some comments on the experimental behavior of FRC beams in flexure

In the present paper the experimental results, recently obtained by the authors, regarding the monotonic and the cyclic flexural response of normal and high-strength concrete beams reinforced with steel bars and discontinuous fibers, are shown. From the experimental results, all referred to low values of shear-to-depth ratios, it emerges clearly that the shear failure is brittle especially under cyclic actions highlighting the role of the fibers in the flexural behavior of the beams. The cyclic action produces a significant decay in the stiffness and in the strength capacity of the beams, and the addition of fibers reduces these negative effects. Form theoretical point of view good agreement can be found utilizing the recent analytical model proposed by the authors.

58 GEOSCIENCES↗

Asperity contacts at the nanoscale: Comparison of Ru and Au

We develop and validate an interatomic potential for ruthenium based on the embedded atom method framework with the Finnis/Sinclair representation. We confirm that the potential yields a stable hcp lattice with reasonable lattice and elastic constants and surface and stacking fault energies. We employ molecular dynamics simulations to bring two surfaces together, one flat and the other with a single asperity. We compare the process of asperity contact formation and breaking in Au and Ru, two materials currently in use in microelectromechanical system switches. While Au is very ductile at 150 and 300 K, Ru shows considerably less plasticity at 300 and 600 K (approximately the same homologous temperature). In Au, the asperity necks down to a single atom thick bridge at separation. While similar necking occurs in Ru at 600 K, it is much more limited than in Au. On the other hand, at 300 K, Ru breaks by a much more brittle process of fracture/decohesion with limited plastic deformation.

36 MATERIALS SCIENCE↗

Nanomechanical Behavior of Single Crystalline SiC Nanotubes Revealed by Molecular Dynamics Simulations

Molecular dynamics simulations with Tersoff potentials were used to study the response of single crystalline SiC nanotubes under tensile, compressive, torsional, combined tension-torsional and combined compression-torsional strains. The simulation results reveal that the nanotubes deform through bond-stretching and breaking and exhibit brittle properties under uniaxial tensile strain, except for the thinnest nanotube at high temperatures, which fails in a ductile manner. Under uniaxial compressive strain, the SiC nanotubes buckle with two modes, i.e. shell buckling and column buckling, depending on the length of the nanotubes. Under torsional strain, the nanotubes buckle either collapse in the middle region into a dumbbell-like structure for thinner wall thicknesses or fail by bond breakage for the largest wall thickness. Both the tensile failure stress and buckling stress decrease under combined tension-torsional and combined compression-torsional strain, and they decrease with increasing torsional rate under combined loading.

36 MATERIALS SCIENCE↗