Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

InGaP/InGaAs doped-channel direct-coupled field-effect transistors logic with low supply voltage

InGaP/InGaAs doped-channel direct-coupled field-effect transistor logic (DCFL) with relatively low supple voltage is demonstrated by two-dimensional analysis. In the integrated enhancement/depletion-mode transistors, subband and two-dimensional electron gas (2DEG) are formed in the InGaAs strain channels, which substantially increase the channel concentration and decrease the drain-to-source saturation voltage. The integrated devices show high turn-on voltage, high transconductance, broad gate voltage swing, and excellent high frequency performance, simultaneously. Furthermore, the integrated devices exhibit large noise margins for DCFL application with low supply voltage of 1.5 V attributed from the relatively small saturation voltages of the studied integrated devices.

36 MATERIALS SCIENCE↗

Highly efficient photovoltaic cells based on In{sub 0.53}Ga{sub 0.47} as alloys with isovalent doping

The effect of isovalent doping with P on the surface and bulk properties of the In{sub 0.53}Ga{sub 0.47}As alloy (below, InGaAs) was evaluated from variations in the photoluminescence and transmission spectra. It is established that isovalent doping decreases the nonradiative recombination rate in the bulk and on the surface of doped layers. The use of additional isovalent doping provided an improvement of parameters of the narrow-gap InGaAs-based solar cell used for the conversion of the concentrated solar radiation. The maximum efficiency of photovoltaic conversion in a spectral range of 900-1840 nm was 7.4-7.35% at a ratio of concentration of the solar radiation of 500-1000 for the AM1.5D Low AOD spectrum.

36 MATERIALS SCIENCE↗

The form of the profile of heterointerfaces in (311)Ga GaAs/AlAs structures

The steady-state photoluminescence and kinetics of photoluminescence of the (100)-oriented and (311)Ga-oriented type II GaAs/AlAs superlattices are studied under the effect of the electric field of the surface acoustic wave. It is found that, in the (100)-oriented structures, the drop of intensity of steady-state photoluminescence and acceleration of photoluminescence kinetics are independent of the direction of the electric field of the surface acoustic wave with respect to crystallographic directions, while in the (311)Ga-oriented structures these effects are anisotropic. It is shown that all variations in the steady-state photoluminescence and in kinetics of photoluminescence of (100)-oriented and (311)Ga-oriented structures under the effect of the electric field of the acoustic wave are associated with transfer and capture by the nonradiative recombination centers of nonequilibrium charge carriers, which are initially localized in wide quantum wells formed by fluctuations of the thickness of the layers of the structures. From the obtained experimental data, the parameters of the profile of heterointerfaces of the (311)Ga GaAs/AlAs superlattices are determined. It is established that the lateral sizes of microgrooves in the [011] direction on the direct and inverse heterointerfaces of the (311)Ga superlattices exceed 3.2 nm, while the modulation of the thickness of the AlAs layers is from 0.8 to 1.2 nm.

36 MATERIALS SCIENCE↗

Mixed conduction in doped semiconductor structures related to quasi-metallic conduction in the impurity band

Mixed conduction due to simultaneous contributions from allowed states in the valence band and extended impurity (acceptor) states, which occur in the impurity band at high impurity concentrations because of the Anderson transition, is observed in a series of GaAs/AlGaAs structures. Mixed conduction manifests itself in the existence of a minimum in the temperature dependence of the carrier concentration and a noticeable bend in the temperature dependences of the conductivity. Expressions for the mixed conductivity on which the calculations are based were derived taking into account the spectrum of impurity states in the quantum wells (the upper and lower Hubbard impurity bands), their occupancies, and the sign of charge carriers in the valence and the impurity bands; the important assumption was made that the width of impurity bands is much smaller than the spacing from the valence band. The calculation results agree well with the experiment and were used to determine the binding energies for the upper and lower Hubbard bands, the acceptor concentration, and the degree of compensation. It is shown that formulas commonly used for the calculation of mixed conductivity need significant corrections in the case of narrow impurity bands.

36 MATERIALS SCIENCE↗

Current-voltage characteristics of silicon-doped GaAs nanowhiskers with a protecting AlGaAs coating overgrown with an undoped GaAs layer

A technique for measurement of longitudinal current-voltage characteristics of semiconductor nanowhiskers remaining in contact with the growth surface is suggested. The technique is based on setting up a stable conductive contact between the top of a nanowhisker and the probe of an atomic-force microscope. It is demonstrated that, as the force pressing the probe against the top of the nanowhisker increases, the natural oxide layer covering the top is punctured and a direct contact between the probe and the nanowhisker body is established. In order to prevent nanowhiskers from bending and, ultimately, breaking, they need to be somehow fixed in space. In this study, GaAs nanowhiskers were kept fixed by partially overgrowing them with a GaAs layer. To isolate nanowhiskers from the matrix they were embedded in, they were coated by a nanometer layer of AlGaAs. Doping of GaAs nanowhiskers with silicon was investigated. The shape of the current-voltage characteristics obtained indicates that introduction of silicon leads to p-type conduction in nanowhiskers, in contrast to n-type conduction in bulk GaAs crystals grown by molecular-beam epitaxy. This difference is attributed to the fact that the vapor-liquid-solid process used to obtain nanowhiskers includes a final stage of liquid-phase epitaxy, a characteristic of the latter being p-type conduction obtained in bulk GaAs(Si) crystals.

36 MATERIALS SCIENCE↗

Wannier-Stark states in a superlattice of InAs/GaAs quantum dots

Electron and hole emission from states of a ten-layer system of tunneling-coupled vertically correlated InAs/GaAs quantum dots (QDs) is studied experimentally by capacitance-voltage measurements and deep-level transient spectroscopy. The thickness of GaAs interlayers separating sheets of InAs QDs was {approx}3 nm, as determined from transmission electron microscope images. It is found that the periodic multimo-dal DLTS spectrum of this structure exhibits a pronounced linear shift as the reverse-bias voltage U{sub r} applied to the structure is varied. The observed behavior is a manifestation of the Wannier-Stark effect in the InAs/GaAs superlattice, where the presence of an external electric field leads to the suppression of coupling between the wave functions of electron states forming the miniband and to the appearance of a series of discrete levels called Wannier-Stark ladder states.

36 MATERIALS SCIENCE↗

Pulsed semiconductor lasers with higher optical strength of cavity output mirrors

Asymmetric heterostructures with an ultrathick waveguide based on an AlGaAs/GaAs alloy system that allow lasing at a wavelength of 905 nm have been developed and fabricated by hydride metalorganic vapor-phase epitaxy. The internal optical loss and internal quantum efficiency of semiconductor lasers based on such structures were 0.7 cm{sup -1} and 97%, respectively. It is shown that the highest output optical power of laser diodes with antireflecting (SiO{sub 2}) and reflecting (Si/SiO{sub 2}) coatings deposited on untreated Fabry-Perot cavity facets obtained by cleaving in an oxygen atmosphere reached 67 W in the pulsed mode and is limited by mirror damage. Treatment of Fabry-Perot cavity facets by etching in argon plasma and the formation of coatings with passivating and oxygen-blocking GaN and Si{sub 3}N{sub 4} layers allowed an increase in the maximum output optical power to 120 W. Mirror damage was not observed at the attained output optical power.

36 MATERIALS SCIENCE↗

Two-band lasing in epitaxially stacked tunnel-junction semiconductor lasers

Epitaxially stacked tunnel-junction laser hetero structures were grown by hydride metalorganic vapor-phase epitaxy in the system of AlGaAs/GaAs/In GaAs alloys. Based on such structures, mesa stripe lasers with an aperture of 150 s- 7 m were fabricated. The possibility of controlling the lasing wavelength by varying the active region thickness in each tunnel-junction laser structure was demonstrated. Independent two-band lasing at wavelengths of 914 and 925 nm (the difference frequency is 2.3 THz) was achieved at a maximum optical radiation power of 20 W in each band of the epitaxially stacked tunnel-junction semiconductor laser.

36 MATERIALS SCIENCE↗

InGaAs tunnel-injection structures with nanobridges: Excitation transfer and luminescence kinetics

Methods of optical spectroscopy and electron microscopy have been used to study tunnel-injection nanostructures the active region of which consisted of an upper In{sub 0.15}Ga{sub 0.85} As quantum-well layer and a lower layer of In{sub 0.6}Ga{sub 0.4}As quantum dots as a light emitter; both layers were separated by a GaAs barrier layer. Deviations from the semiclassical Wentzel-Kramers-Brillouin model are observed in the dependence of the tunneling time on barrier's thickness. Reduction of the transfer time to several picoseconds at a barrier thickness smaller than 6 nm is accounted for by formation of InGaAs nanobridges between tops of quantum dots and the quantum-well layer; the nanobridges include those with their own hole state. The effect of an electric field induced by tunneling on the carriers' transfer time in a tunnel-injection nanostructure is taken into account.

36 MATERIALS SCIENCE↗

An (AlGaAs/GaAs/AlGaAs){sub 60} resonant Bragg structure based on the second quantum-confinement level of heavy-hole excitons in quantum wells

Photoluminescence and optical-reflection spectra of a periodic structure consisting of 60 tunneling-isolated GaAs quantum wells separated by AlGaAs barriers are studied. The structure is designed so that, for a certain angle of incidence ({approx}23{sup o}), the Bragg resonance condition is satisfied for light with a photon energy equal to the energy of heavy-hole excitons at the second quantum-confinement level in the wells. It is established experimentally that, under the conditions of double exciton-polariton and Bragg resonance, a superradiant optical mode is formed. Dependences of Bragg and exciton-polariton reflection on the angle of incidence and polarization of light and the temperature are investigated.

36 MATERIALS SCIENCE↗

Mixing of hole states in GaAs/AlAs(110) heterostructures

States in the AlAs/GaAs(12)/AlAs(110) quantum well and AlAs(6)/GaAs(12)(110) superlattice are considered. For analysis of mixing of light- and heavy-hole states in these structures, a parameter-dependent set of basis functions is suggested and the values of the parameter at which one of the functions describes basically heavy-hole states and the other light-hole states are determined. For the energy region considered in the study, four energy levels are determined in the AlAs/GaAs(12)/AlAs(110) quantum well and, correspondingly, four minibands in the AlAs(6)/GaAs(12)(110) superlattice. Analysis shows that the first and fourth levels in the quantum well and the first and fourth minibands in the superlattice are related basically to heavy-hole states. The other two states in the quantum well and the second and third minibands in the super-lattice are structurally more complex: in these states and minibands, the hole states are noticeably mixed. In these minibands, states are substantially separated in space and in spin.

36 MATERIALS SCIENCE↗

A single-spatial-mode semiconductor laser based on InAs/InGaAs quantum dots with a diffraction filter of optical modes

The concept of a diffraction optical filter is used for prevention of high-order mode oscillation in a design of stripe laser diodes with an active region based on InAs/InGaAs quantum dots emitting in the 1.3-{mu}m wavelength range grown on GaAs substrates. Incorporation of such a filter made it possible to increase the width of the stripe and obtain an output power as high as 700 mW with retention of a single-spatial-mode character of lasing.

36 MATERIALS SCIENCE↗

Terahertz emission and photoconductivity in n-type GaAs/AlGaAs quantum wells: the role of resonant impurity states

Terahertz emission spectra in a longitudinal electric field and lateral photoconductivity spectra under terahertz illumination have been studied in structures with GaAs/AlGaAs quantum wells (QWs). It is shown that the spectra contain features associated with electron transitions involving resonant impurity states related to the second quantum-well subband. Calculations of the energy spectrum of impurity states and matrix elements of optical transitions made by taking into account various positions of the impurity relative to the QW center confirm the assumptions made.

36 MATERIALS SCIENCE↗

Electroluminescence of InGaAs/GaAs quantum-size heterostructures with (III, Mn)V and Ni ferromagnetic injectors

Electroluminescence characteristics of light-emitting diodes based on InGaAs/GaAs quantum well heterostructures with an injector layer made of ferromagnetic metal (Ni), semimetal compound (MnSb), or magnetic semiconductor (InMnAs) were comparatively studied. The general feature is electroluminescence quenching as the spacer layer thickness between a quantum well and a magnetic injector decreases. It was found that the temperature dependence of the electroluminescence in diodes with Ni and MnSb is caused by thermal ejection of carriers from the quantum well; in diodes with InMnAs, it is caused by the temperature dependence of the carrier concentration in magnetic semiconductor and thermal ejection of carriers from the quantum well in the high-temperature region.

36 MATERIALS SCIENCE↗

Carrier heating in quantum wells under optical and current injection of electron-hole pairs

Carrier heating in GaAs/AlGaAs quantum wells (QWs) under optical interband pumping in the spontaneous-emission mode has been studied. The electron temperature was determined as a function of the pumping intensity. The effect of the electric field on the photoluminescence spectrum was examined. The change in the carrier concentration with the drive current in the spontaneous- and stimulated-emission modes in InGaAsSb/InAlGaAsSb QWs was determined from electroluminescence spectra. The rise in the temperature of hot carriers, which results in the increase in the carrier concentration with the drive current, was roughly estimated.

36 MATERIALS SCIENCE↗

Frequency bandwidth and conversion loss of a semiconductor heterodyne receiver with phonon cooling of two-dimensional electrons

The temperature and concentration dependences of the frequency bandwidth of terahertz heterodyne AlGaAs/GaAs detectors based on hot electron phenomena with phonon cooling of two-dimensional electrons have been measured by submillimeter spectroscopy with a high time resolution. At a temperature of 4.2 K, the frequency bandwidth at a level of 3 dB (f{sub 3dB}) is varied from 150 to 250 MHz with a change in the concentration n{sub s} according to the power law f{sub 3dB} {proportional_to} n{sub s}{sup -0.5} due to the dominant contribution of piezoelectric phonon scattering. The minimum conversion loss of the semiconductor heterodyne detector is obtained in structures with a high carrier mobility ({mu} > 3 x 10{sup 5} cm{sup 2} V{sup -1} s{sup -1} at 4.2 K).

36 MATERIALS SCIENCE↗

In situ optical diagnostics of growing surfaces in the process of nanoheterostructure fabrication

It is demonstrated that in situ reflectance and reflectance-anisotropy measurements can be used as efficient real-time monitoring tools for all stages of the growth of heterostructures with ultrathin (few-monolayer) GaAs and AlAs layers. Changes in the layer composition at normal GaAs/AlAs interfaces in the active region of resonant-tunneling diode structures are detected with a thickness resolution on the order of one monolayer. Resonant-tunneling diodes with a peak-to-valley ratio of 3.3 and peak current density of 6.6 x 10{sup 4} A/cm{sup 2} are fabricated.

36 MATERIALS SCIENCE↗

Control of emission wavelength for InGaAs/GaAs quantum wells and laser structures on their basis by means of proton irradiation

Features of controlling the wavelength of emission from laser heterostructures with strained InGaAs/GaAs quantum wells by irradiation with medium-energy (with the energy as high as 150 keV) protons are studied. It is established that irradiation with H{sup +} ions and subsequent thermal annealing at a temperature of 700 deg. C make it possible to decrease the wavelength of emission from quantum wells. As the dose of ions is increased from 10{sup 13} to 10{sup 16} cm{sup -2}, the magnitude of change in the wavelength increases to 20 nm. Starting with a dose of 10{sup 15} cm{sup -2}, a significant decrease in the intensity of emission is observed. The optimum dose of H{sup +} ions (6 x 10{sup 14} cm{sup -2}) and annealing temperature (700 deg. C) for modifying the InGaAs/GaAs/InGaP laser structures are determined; it is shown that, in this case, one can obtain a shift of {approx}(8-10) nm for the wavelength of laser radiation with low losses in intensity with the quality of the surface of laser structures retained. The observed 'blue' shift is caused by implantation-stimulated processes of intermixing of the In and Ga atoms at the InGaAs/GaAs interface.

36 MATERIALS SCIENCE↗