Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variability study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Flat plate vs. concentrator solar photovoltaic cells - A manufacturing cost analysis

The choice of which photovoltaic system (flat plate or concentrator) to use for utilizing solar cells to generate electricity depends mainly on the cost. A detailed, comparative manufacturing cost analysis of the two types of systems is presented. Several common assumptions, i.e., cell thickness, interest rate, power rate, factory production life, polysilicon cost, and direct labor rate are utilized in this analysis. Process sequences, cost variables, and sensitivity analyses have been studied, and results of the latter show that the most important parameters which determine manufacturing costs are concentration ratio, manufacturing volume, and cell efficiency. The total cost per watt of the flat plate solar cell is $1.45, and that of the concentrator solar cell is $1.85, the higher cost being due to the increased process complexity and material costs.

Granon, L. A.↗
NASA NTRS1981

Pre-design study for a modern four-bladed rotor for the Rotor System Research Aircraft (RSRA)

Various candidate rotor systems were compared in an effort to select a modern four-bladed rotor for the RSRA. The YAH-64 rotor system was chosen as the candidate rotor system for further development for the RSRA. The process used to select the rotor system, studies conducted to mate the rotor with the RSRA and provide parametric variability, and the development plan which would be used to implement these studies are presented. Drawings are included.

Hughes, C. W.↗
NASA NTRS1980

Classification, experimental petrology and possible volcanic histories of the Apollo 11 high-K basalts

The Apollo 11 high-K basalt samples are classified into three textural categories: vitrophyric, anti-insertal, and antiophitic. Low-pressure phase equilibrium experiments and cooling rate studies were performed on a synthetic analog of 10085, 832. The dynamic crystallization experiments were designed to study textural development with: (1) a variable cooling rate from a constant initial temperature above the liquidus, and (2) cooling at a constant rate from variable initial temperatures below the liquidus. These experiments show that a variety of cooling rates initiated from temperatures both below and above the liquidus can produce all the observed textures. The results are consistent with the interpretation that all of the high-K basalt samples were derived from a single lava flow or lava lake.

Grove, T. L.↗
NASA NTRS1982

Should helicopter noise be measured differently from other aircraft noise? A review of the psychoacoustic literature

A review of 34 studies indicates that several factors or variables might be important in providing a psychoacoustic foundation for measurements of the noise from helicopters. These factors are phase relations, tail rotor noise, repetition rate, crest level, and generic differences between conventional aircraft and helicopters. Particular attention was given to the impulsive noise known as blade slap. Analysis of the evidence for and against each factor reveals that, for the present state of scientific knowledge, none of these factors should be regarded as the basis for a significant noise measurement correction due to impulsive blade slap. The current method of measuring effective perceived noise level for conventional aircraft appears to be adequate for measuring helicopter noise as well.

Molino, J. A.↗
NASA NTRS1983

Sea ice effective microwave emissivities from satellite passive microwave and infrared observations

Near-simultaneous images from the temperature-humidity IR radiometer and dual-polarization scanning multichannel microwave radiometer of the Nimbus 7 satellite are used to investigate microwave sea ice emissivities on a global scale. Emissivities in several Arctic region study areas are found to be approximately constant during a nine-month pereiod covering the fall, winter and spring months, in the cases of both first-year and multiyear ice. During the onset of summer, emissivity increases of about 30 percent are observed at 37 GHz in multiyear ice. A multichannel cluster analysis over very large study areas during winter indicates considerable variability in emissivities of consolidated ice clusters at 37 GHz, and only 1/3 as much variability at 18 GHz. If the variability within each cluster is quantified and taken into account by means of multispectral analysis, data on ice thickness and surface characteristics may also be obtained.

Comiso, J. C.↗
NASA NTRS1984

Steam bottoming cycle for an adiabatic diesel engine

Steam bottoming cycles using adiabatic diesel engine exhaust heat which projected substantial performance and economic benefits for long haul trucks were studied. Steam cycle and system component variables, system cost, size and performance were analyzed. An 811 K/6.90 MPa state of the art reciprocating expander steam system with a monotube boiler and radiator core condenser was selected for preliminary design. The costs of the diesel with bottoming system (TC/B) and a NASA specified turbocompound adiabatic diesel with aftercooling with the same total output were compared, the annual fuel savings less the added maintenance cost was determined to cover the increase initial cost of the TC/B system in a payback period of 2.3 years. Steam bottoming system freeze protection strategies were developed, technological advances required for improved system reliability are considered and the cost and performance of advanced systes are evaluated.

Poulin, E.↗
NASA NTRS1983

A study of solar activity-ozone relationship from Nimbus-4 BUV data

The total O3 and the O3 mixing ratio at various pressure levels in the stratosphere measured from the Nimbus-4 BUV experiment over a 7-yr period (1970 to 1977) comprises a comprehensive data base available to study the possible effects of solar variability on stratospheric O3. It is shown that with the decrease in solar activity from 1970 to 1976, the globally averaged O3 inferred from Nimbus-4 data decreases from about 10 to 12 percent in the upper stratosphere to about 1 to 3 percent in the lower stratosphere. The systematic decrease in O3 seems to be correlated with the conventional indices of solar activity; however, it is difficult to account for the observed changes at various pressure levels with the current understanding of the photochemical models and the solar UV flux variations over a solar cycle.

Chandra, S.↗
NASA NTRS1983

Observations of a hard X-ray component in the spectrum of Nova Ophiuchi

The spectrum and time variation of Nova Ophiuchi (H1705-25) in the 10-200 keV range as measured by the UCSD/MIT instruments aboard HEAO 1 during the period 1977 August 25 to September 28 are reported. The composite curve is best fitted by a kT = 2 keV thin thermal bremsstrahlung model below 10 keV and a separate hard X-ray component fitted equally well by a power-law component with photon index 2.19 + or - 0.06 or a kT = 32.1 + or - 2.4 keV thermal bremsstrahlung model. This is the first observation of a hard tail in the spectrum of a transient X-ray source with sufficient statistical significance to allow a detailed study of its spectral and temporal variability. It is found that the intensity variations of the high-energy X-rays are consistent with the variability at lower energies (3-6 keV), but no hard X-ray spectral index variability is found on time scales from 2 days to 2 weeks. The results can be interpreted as due to accretion onto a neutron star (or possibly onto a black hole) that may also be surrounded by an extended corona.

Wilson, C. K.↗
NASA NTRS1984

Multifrequency observations of the BL Lacertae object 0735+178

In each of the present four simultaneous spectra covering the radio-through-X-ray regimes, the IR-UV synchrotron continuum dominates the total observed power and presumably becomes opague between 10 to the 11th and 10 to the 13th Hz. Nonsimultaneous observations were also conducted, over a longer time period, in order to study long- and short-term variability at X-ray, optical, and radio frequencies. These data indicate that the rapid and dramatic variations evident at IR and optical wavelengths are absent at radio and X-ray frequencies, supporting a view of IR-UV flux emanation from a small region, while the X-rays are produced by the inverse Compton process in the radio-emitting region. Particles, photons and magnetic field may not be far from equipartition in this region. Theoretical suggestions are developed regarding the radial behavior of the electron density and magnetic field.

Bregman, J. N.↗
NASA NTRS1984

Notes on the system TV Geminorum

Low-resolution SWP spectra and high-resolution LWR spectra of the SRc variable star TV Gem have been studied. The available ultraviolet spectrophotometry and UBV photometry of the system can be interpreted in terms of the blended light from a B3.5 IV star and an M1 Iab star. The separation of the two stars is less than about 3 arc sec. Since the magnitude difference is a minimum in the B filter, being about 1.6 mag there, direct observation of TV Gem in a passband at 4400 A under conditions of good seeing might reveal the blue companion. No evidence was found for absorption lines of Mg II formed in the part of the wind of the M star which is projected against the disk of the B star.

Underhill, A. B.↗
NASA NTRS1987

A computer solution for the dynamic load, lubricant film thickness and surface temperatures in spiral bevel gears

A complete analysis of spiral bevel gear sets is presented. The gear profile is described by the movements of the cutting tools. The contact patterns of the rigid body gears are investigated. The tooth dynamic force is studied by combining the effects of variable teeth meshing stiffness, speed, damping, and bearing stiffness. The lubrication performance is also accomplished by including the effects of the lubricant viscosity, ambient temperature, and gear speed. A set of numerical results is also presented.

Chao, H. C.↗
NASA NTRS1987

Textural evolution of partially-molten planetary materials in microgravity

Recent Earth-based experiments examining the textural evolution of partially-molten rocks have revealed two important ways in which surface energy considerations affect magma. An initial experimental program addressing surface-energy effects on partially-molten materials in microgravity would involve simple, isothermal treatment of natural samples (meteorites, perioditic komatiite) at preselected temperatures in the melting range. Textural evolution would be assessed by time studies in which the only experiment variable would be run duration. Textural characterization of each sample would be done by quenching, recover, and sectioning for generally later, computer-aided interpretation of features.

Watson, E. B.↗
NASA NTRS1988

An artificial gravity research facility for life sciences

To obtain data for the design of a Mars mission vehicle configured for artificial gravity, NASA is currently studying the design of a variable-gravity research facility (VGRF) in a low earth orbit. The VGRF could be flown as a coorbiting payload requiring periodic servicing, resupply, and contingency intervention from the Space Station. The reasons why artificial gravity is needed for long-term missions are discussed; preliminary designs of a Mars vehicle with artificial gravity (at a weight cost of about 20 percent) are described; and particular attention is given to the VGRF design and mission profile.

Lemke, Larry G.↗
NASA NTRS1988

Comments on the observability of coronal variations

The appropriateness of the presently available X-ray and XUV multilayer emission lines for studies of solar outer atmosphere and corona is discussed. The spectral regions within which solar emission lines are formed are compared with the available multilayer passbands, with particular attention given to lines which are of interest for studying the various temperature regimes and variability time constants known to be present in the solar atmosphere. It is emphasized that, for many of the typical regions found in the outer solar atmosphere, the observable time scales for variability are determined by the ionization and recombination time scales of the plasma rather than by the inherent nature of the physical process causing the variability.

Golub, Leon↗
NASA NTRS1990

A comparison of single-cycle versus multiple-cycle proof testing strategies

An evaluation of single-cycle and multiple-cycle proof testing (MCPT) strategies for SSME components is described. Data for initial sizes and shapes of actual SSME hardware defects are analyzed statistically. Closed-form estimates of the J-integral for surface flaws are derived with a modified reference stress method. The results of load- and displacement-controlled stable crack growth tests on thin IN-718 plates with deep surface flaws are summarized. A J-resistance curve for the surface-cracked configuration is developed and compared with data from thick compact tension specimens. The potential for further crack growth during large unload/reload cycles is discussed, highlighting conflicting data in the literature. A simple model for ductile crack growth during MCPT based on the J-resistance curve is used to study the potential effects of key variables. The projected changes in the crack size distribution during MCPT depend on the interactions between several key parameters, including the number of proof cycles, the nature of the resistance curve, the initial crack size distribution, the component boundary conditions (load vs. displacement control), and the magnitude of the applied load or displacement. The relative advantages of single-cycle and multiple-cycle proof testing appear to be specific, therefore, to individual component geometry, material, and loading.

Hudak, S. J., Jr.↗
NASA NTRS1989

Biochemical correlates of neurosensory changes in weightlessness

The possible existence of a relationship between space motion sickness and chemical and biochemical variables measured in body fluids is studied. Clinical chemistry and endocrine measurements from blood and urine samples taken before and after Space Shuttle flights were analyzed along with the occurrence of SMS during flight and provocative testing before flight. Significant positive correlations were observed with serum chloride and significant negative correlations with serum phosphate, serum uric acid, and plasma thyroid stimulating hormone.

Leach, Carolyn S.↗
NASA NTRS1991

Effects Of Heat Sinks On VPPA Welds

Report describes theoretical and experimental study of absorption of heat by metal blocks in contact with metal plate while plate subjected to variable-polarity plasma-arc (VPPA) welding. Purpose of study to contribute to development of comprehensive mathematical model of temperature in weld region. Also relevant to welding of thin sheets of metal to thick blocks of metal, heat treatment of metals, and hotspots in engines.

Nunes, Arthur C.↗
NASA NTRS1990

Design optimization for cost and quality: The robust design approach

Designing reliable, low cost, and operable space systems has become the key to future space operations. Designing high quality space systems at low cost is an economic and technological challenge to the designer. A systematic and efficient way to meet this challenge is a new method of design optimization for performance, quality, and cost, called Robust Design. Robust Design is an approach for design optimization. It consists of: making system performance insensitive to material and subsystem variation, thus allowing the use of less costly materials and components; making designs less sensitive to the variations in the operating environment, thus improving reliability and reducing operating costs; and using a new structured development process so that engineering time is used most productively. The objective in Robust Design is to select the best combination of controllable design parameters so that the system is most robust to uncontrollable noise factors. The robust design methodology uses a mathematical tool called an orthogonal array, from design of experiments theory, to study a large number of decision variables with a significantly small number of experiments. Robust design also uses a statistical measure of performance, called a signal-to-noise ratio, from electrical control theory, to evaluate the level of performance and the effect of noise factors. The purpose is to investigate the Robust Design methodology for improving quality and cost, demonstrate its application by the use of an example, and suggest its use as an integral part of space system design process.

Unal, Resit↗