Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “units”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Clustering of Observed Diurnal Cycles of Precipitation over the United States for Evaluation of a WRF Multiphysics Regional Climate Ensemble

The diurnal cycle of precipitation during the summer season over the contiguous United States is examined in eight distinct regions. These were identified using cluster analysis applied to the diurnal cycle characteristics at 2141 rainfall gauges over the 10-yr period 1991–2000. Application of the clustering technique provides a physically meaningful way of identifying regions for comparison of model results with observations. The diurnal cycle for each region is specified in terms of 1) total precipitation, 2) frequency of precipitation occurrence, and 3) intensity of precipitation per occurrence on an hourly basis averaged over the 10-yr period. The amplitude and phase of each element of the diurnal cycle was obtained from harmonic analysis and has been compared with the results of a 24-member multiphysics ensemble of simulations produced by the Weather Research and Forecast (WRF) Model on a region-by-region basis. Three cumulus schemes, two radiation schemes, two microphysics schemes, and two planetary boundary layer schemes were included in the ensemble. Simulations of total precipitation showed reasonable agreement with observations in regions where the diurnal cycle is directly influenced by solar radiation, (e.g., the U.S. Southeast), but they were less successful in regions where other factors influence the diurnal cycle (e.g., the central United States). The diurnal cycle of precipitation frequency and intensity showed substantial biases in the simulations of all eight regions, namely, overestimation of occurrences and underestimation of intensities. Simulations were sensitive to the cumulus and radiation schemes but were largely insensitive to either microphysics or planetary boundary layer schemes.

Mooney, P. A.↗

Impact of Vegetation Assimilation on Flash Drought Characteristics across the Continental United States

Predicting and managing the impacts of flash droughts is difficult owing to their rapid onset and intensification. Flash drought monitoring often relies on assessing changes in root-zone soil moisture. However, the lack of widespread soil moisture measurements means that flash drought assessments often use process-based model data like that from the North American Land Data Assimilation System (NLDAS). Such reliance opens flash drought assessment to model biases, particularly from vegetation processes. Here, we examine the influence of vegetation on NLDAS-simulated flash drought characteristics by comparing two experiments covering 1981–2017: open loop (OL), which uses NLDAS surface meteorological forcing to drive a land surface model using prognostic vegetation, and data assimilation (DA), which instead assimilates near-real-time satellite-derived leaf area index (LAI) into the land surface model. The OL simulation consistently underestimates LAI across the United States, causing relatively high soil moisture values. Both experiments produce similar geographic patterns of flash droughts, but OL produces shorter duration events and regional trends in flash drought occurrence that are sometimes opposite to those in DA. Across the Midwest and Southern United States, flash droughts are 4 weeks (about 70%) longer on average in DA than OL. Moreover, across much of the Great Plains, flash drought occurrence has trended upward according to the DA experiment, opposite to the trend in OL. This sensitivity of flash drought to the representation of vegetation suggests that representing plants with greater fidelity could aid in monitoring flash droughts and improve the prediction of flash drought transitions to more persistent and damaging long-term droughts.

Drought↗

End-of-Century Changes in Orographic Precipitation with the Intermediate Complexity Atmospheric Research Model over the Western United States

Abstract Downscaled precipitation projections were created using the Intermediate Complexity Atmospheric Research (ICAR) model over the western United States to increase the physical realism in orographic precipitation changes. End-of-century simulations from eight models in phase 5 of the Coupled Model Intercomparison Project (CMIP5) were downscaled with ICAR and compared to the widely utilized statistically downscaled dataset, localized constructed analogs (LOCAs), to understand where and why projections of cool-season (September–May) precipitation differed. ICAR and LOCA precipitation projections were similar, but their sign differed in hydrologically relevant regions likely due to ICAR’s simulation of microphysics and mesoscale dynamics with high-resolution topography (6 km). In the Pacific Northwest, cool-season precipitation projections from ICAR showed an increase on the windward side of the Cascades and no significant change within the lee. This difference between the windward and leeward side was attributed to reduced zonal wind speeds, allowing more time for microphysical processes within ICAR. This contrast is enhanced by rain’s faster fall speed compared to snow, limiting transport into the lee. Meanwhile, LOCA projected an increase in precipitation across the Cascades. In the Upper Colorado River basin, LOCA projected an increase in precipitation in high elevation regions (>3000 m), but ICAR projected no significant change or a decrease in precipitation. High elevation differences were most evident in the spring and fall and were also attributed to a snow-to-rain transition and dynamical processes that impacted orographic enhancement within ICAR. Idealized, controlled studies are needed to better isolate individual processes, but these results underscore the importance of including microphysics and mesoscale dynamics within regional-scale precipitation projections. Significance Statement A set of global climate model simulations was downscaled using an atmospheric model that contains key physical equations, referred to as Intermediate Complexity Atmospheric Research (ICAR). ICAR was used to examine projected changes in end-of-century cool-season precipitation over mountains in the western United States. Precipitation projections from ICAR were similar to projections that used statistical relationships to downscale climate projections. However, projections differed between ICAR and statistically downscaled datasets in whether they increased, decreased, or stayed the same in specific, hydrologically relevant regions such as the eastern Cascades and high elevation areas of the Upper Colorado River basin. These differences were attributed to the simulation of physical processes in ICAR. The results highlight the importance of kilometer-scale atmospheric processes in regional climate projections.

Currier, William Ryan [NOAA/Physical Sciences Labo↗

Two Large-Scale Meteorological Patterns are Associated with Short-Duration Dry Spells in the Northeastern United States

Large-scale meteorological pattern (LSMP)–based analysis is used in a novel way to understand meteorological conditions before and during short-duration dry spells over the northeastern United States. These LSMPs are useful to assess models and select better-performing models for future projections. Dry-spell events are identified from histograms of consecutive dry days below a daily precipitation threshold. Events lasting 12 days or longer, which correspond to ~10% of dry-spell events, are examined. The 500-hPa stream-function anomaly fields for the first 12 days of each event are time averaged, and k -means clustering is applied to isolate the dry-spell-related LSMPs. The first cluster has a strong low pressure anomaly over the Atlantic Ocean, southeast of the region, and is more common in winter and spring. The second cluster has strong high pressure over east-central North America and is most common during autumn. Over the region, both clusters have negative specific humidity anomalies, negative integrated vapor transport from the north, and subsidence associated with a midlatitude jet stream dipole structure that reinforces upper-level convergence. Subsidence is supported by cold-air advection in the first cluster and the location on the east side of the lower-level high pressure in the second cluster. Extratropical cyclone storm tracks are generally shifted southward of the region during the dry spells. Individual events lie on a continuum between two distinct clusters. These clusters have similar local, but different remote, properties. Although dry spells occur with greater frequency during drought months, most dry spells occur during nondrought months. Significance Statement: This study examines the large-scale weather patterns and meteorological conditions associated with dry-spell events lasting at least 2 weeks while affecting the northeastern United States. A statistical approach groups events together on the basis of similar atmospheric features. We find two distinct sets of patterns that we call large-scale meteorological patterns. These patterns reduce moisture, foster localized sinking, and shift the storm track southward along the Atlantic seaboard, all of which reduce precipitation. Besides greater understanding, knowing the meteorological patterns during short-term dryness in the region provides an important tool to assess how well atmospheric models reproduce these specific patterns. More dry spells occur in non-drought months than in drought months, which means that dry spells can occur without preexisting drought conditions.

58 GEOSCIENCES↗

Opportunities for and challenges to further reductions in the “specific power” rating of wind turbines installed in the United States

A wind turbine’s “specific power” rating relates its capacity to the swept area of its rotor in terms of Watt per square meter. For a given generator capacity, specific power declines as rotor size increases. In land-rich but capacity-constrained wind power markets, such as the United States, developers have an economic incentive to maximize megawatt-hours per constrained megawatt, and so have favored turbines with ever-lower specific power. To date, this trend toward lower specific power has pushed capacity factors higher while reducing the levelized cost of energy. We employ geospatial levelized cost of energy analysis across the United States to explore whether this trend is likely to continue. We find that under reasonable cost scenarios (i.e. presuming that logistical challenges from very large blades are surmountable), low-specific-power turbines could continue to be in demand going forward. Beyond levelized cost of energy, the boost in market value that low-specific-power turbines provide could become increasingly important as wind penetration grows.

geospatial modeling↗

Scaling soft matter physics to thousands of graphics processing units in parallel

We describe a multi-graphics processing unit (GPU) implementation of the Ludwig application, which specialises in simulating a variety of complex fluids via lattice Boltzmann fluid dynamics coupled to additional physics describing complex fluid constituents. We describe our methodology in augmenting the original central processing unit (CPU) version with GPU functionality in a maintainable fashion. We present several optimisations that maximise performance on the GPU architecture through tuning for the GPU memory hierarchy. We describe how we implement particles within the fluid in such a way to avoid a major diversion of the CPU and GPU codebases, whilst minimising data transfer at each time step. We detail our halo-exchange communication phase for the code, which exploits overlapping to allow efficient parallel scaling to many GPUs. We present results showing that the application demonstrates excellent scaling to at least 8192 GPUs in parallel, the largest system tested at the time of writing. The GPU version (on NVIDIA K20X GPUs) is around 3.5–5 times faster that the CPU version (on fully utilised AMD Opteron 6274 16-core CPUs), comparing equal numbers of CPUs and GPUs.

Computer Science↗

Designing a graphics processing unit accelerated petaflop capable lattice Boltzmann solver: Read aligned data layouts and asynchronous communication

The lattice Boltzmann method is a well-established numerical approach for complex fluid flow simulations. Recently, general-purpose graphics processing units (GPUs) have become available as high-performance computing resources at large scale. We report on designing and implementing a lattice Boltzmann solver for multi-GPU systems that achieves 1.79 PFLOPS performance on 16,384 GPUs. To achieve this performance, we introduce a GPU compatible version of the so-called bundle data layout and eliminate the halo sites in order to improve data access alignment. Furthermore, we make use of the possibility to overlap data transfer between the host central processing unit and the device GPU with computing on the GPU. As a benchmark case, we simulate flow in porous media and measure both strong and weak scaling performance with the emphasis being on large-scale simulations using realistic input data.

Computer Science↗

Disease properties, geography, and mitigation strategies in a simulation spread of rinderpest across the United States

For the past decade, the Food and Agriculture Organization of the United Nations has been working toward eradicating rinderpest through vaccination and intense surveillance by 2012. Because of the potential severity of a rinderpest epidemic, it is prudent to prepare for an unexpected outbreak in animal populations. There is no immunity to the disease among the livestock or wildlife in the United States (US). If rinderpest were to emerge in the US, the loss in livestock could be devastating. We predict the potential spread of rinderpest using a two-stage model for the spread of a multi-host infectious disease among agricultural animals in the US. The model incorporates large-scale interactions among US counties and the small-scale dynamics of disease spread within a county. The model epidemic was seeded in 16 locations and there was a strong dependence of the overall epidemic size on the starting location. The epidemics were classified according to overall size into small epidemics of 100 to 300 animals (failed epidemics), epidemics infecting 3 000 to 30 000 animals (medium epidemics), and the large epidemics infecting around one million beef cattle. The size of the rinderpest epidemics were directly related to the origin of the disease and whether or not the disease moved into certain key counties in high-livestock-density areas of the US. The epidemic size also depended upon response time and effectiveness of movement controls.

59 BASIC BIOLOGICAL SCIENCES↗

Associations between environmental quality and infant mortality in the United States, 2000–2005

Background: The United States (U.S.) suffers from high infant mortality (IM) rates and there are significant racial/ethnic differences in these rates. Prior studies on the environment and infant mortality are generally limited to singular exposures. We utilize the Environmental Quality Index (EQI), a measure of cumulative environmental exposure (across air, water, land, sociodemographic, and land domains) for U.S. counties from 2000 to 2005, to investigate associations between ambient environment and IM across maternal race/ethnicity. Methods: We linked 2000–2005 infant data from the U.S. Centers for Disease Control and Prevention to the EQI (n = 22,702,529; 144,741 deaths). We utilized multi-level regression to estimate associations between quartiles of county-level EQI and IM. We also considered associations between quartiles of county level domain specific indices with IM. We controlled for rural-urban status (RUCC1: urban, metropolitan; RUCC2: urban, non-metropolitan; RUCC3: less urbanized; RUCC4: thinly populated), maternal age, maternal education, marital status, infant sex, and stratified on race/ethnicity. Additionally, we estimated associations for linear combinations of environmental quality and rural-urban status. Results: We found a mix of positive, negative, and null associations and our findings varied across domain and race/ethnicity. Poorer overall environmental quality was associated with decreased odds among Non-Hispanic whites (OR and 95% CI: EQIQ4 (ref. EQIQ1): 0.84[0.80,0.89]). For Non-Hispanic blacks and Hispanics, some increased odds were observed. Poorer air quality was monotonically associated with increased odds among Non-Hispanic whites (airQ4 (ref. airQ1): 1.05[0.99,1.11]) and blacks (airQ4 (ref. airQ1): 1.09 [0.9,1.31]). Rural status was associated with increased IM odds among Hispanics (RUCC4-Q4:1.36[1.04,1.78]; RUCC1-Q4: 1.04[0.92,1.16], ref. for both RUCC1-Q1). Conclusions: This study is the first to report on associations between ambient environmental quality and IM across the United States. It corroborates prior research suggesting an association between air pollution and IM and identifies residence in thinly populated (rural) areas as a potential risk factor towards IM amongst Hispanics. Some of the counterintuitive findings highlight the need for additional research into potentially differential drivers of environmental quality across the rural-urban continuum, especially with regards to the sociodemographic environment.

60 APPLIED LIFE SCIENCES↗

A Comparative Life-Cycle Assessment of Briquetting Logging Residues and Lumber Manufacturing Coproducts in Western United States

Abstract. Timber harvest activities in the western United States have resulted in large volumes of low- to no-value logging (forest) residues. Alternatives to pile-and-burning are needed to best utilize this material and to mitigate the resultant environmental impacts. Briquetting (densifying) forest residues near-woods is one such option and is the focus of this study. This study presents a cradle-to-grave life-cycle assessment (LCA) performed to evaluate the overall environmental impacts associated with briquetting post-harvest forest residues and dry sawmill residues (sawdust) in the Pacific Northwest (PNW) region of the United States. Environmental impacts resulting from the two briquette production systems were compared with firewood and propane production, which are common residential heating sources in rural areas of the PNW, on a per 1 MJ of useful energy for domestic heating. In the briquetted post-harvest forest residue system, the feedstock preparation stage had the largest share in global warming (GW) impact, mainly resulting from the drying process (69.5%), followed by transportation. Valorization of post-harvest forest residues, in combination with a briquetter, to produce a bioenergy carrier was revealed to be advantageous in smog, acidification, and eutrophication impact categories, with considerable environmental benefits from avoided pile-and-burn emissions. With all scenarios investigated, briquette production from post-harvest forest residues with high dryer efficiency showed lowest GW impact compared to briquetting sawmill residues and firewood supply chain. For a scenario analysis, LCA showed that using a diesel generator to support the forest residue briquetter operation resulted in 45% higher GW impact compared to use of a wood-gas-powered generator. Keywords: Bioenergy, Biomass densification, Briquette, Forest residues, Life-cycle assessment, Sawdust.

Agriculture↗

Atomic Force Microscopy of Photosystem II and Its Unit Cell Clustering Quantitatively Delineate the Mesoscale Variability in Arabidopsis Thylakoids

Photoautotrophic organisms efficiently regulate absorption of light energy to sustain photochemistry while promoting photoprotection. Photoprotection is achieved in part by triggering a series of dissipative processes termed non-photochemical quenching (NPQ), which depend on the re-organization of photosystem (PS) II supercomplexes in thylakoid membranes. Using atomic force microscopy, we characterized the structural attributes of grana thylakoids from Arabidopsis thaliana to correlate differences in PSII organization with the role of SOQ1, a recently discovered thylakoid protein that prevents formation of a slowly reversible NPQ state. We developed a statistical image analysis suite to discriminate disordered from crystalline particles and classify crystalline arrays according to their unit cell properties. Through detailed analysis of the local organization of PSII supercomplexes in ordered and disordered phases, we found evidence that interactions among light-harvesting antenna complexes are weakened in the absence of SOQ1, inducing protein rearrangements that favor larger separations between PSII complexes in the majority (disordered) phase and reshaping the PSII crystallization landscape. The features we observe are distinct from known protein rearrangements associated with NPQ, providing further support for a role of SOQ1 in a novel NPQ pathway. The particle clustering and unit cell methodology developed here is generalizable to multiple types of microscopy and will enable unbiased analysis and comparison of large data sets.

59 BASIC BIOLOGICAL SCIENCES↗

Assessing springtime vertebrate prey of sympatric mesopredators in the southeastern United States using metabarcoding analysis

Coyotes (Canis latrans) colonized the eastern United States over the last century and formed a 3-species predator guild with bobcats (Lynx rufus) and gray foxes (Urocyon cinereoargenteus) across much of the southeastern United States. Diets among the three species vary along with respective impacts on game species such as white-tailed deer (Odocoileus virginianus) and wild turkeys (Meleagris gallopavo). To determine predation impacts on vertebrate prey and dietary overlap in consumption of prey items, we assessed diets of coyote, bobcat, and gray fox during spring, coinciding with white-tailed deer fawning and wild turkey nesting and brood rearing. We sampled across three sites along the Savannah River in South Carolina from mid-May through mid-June of 2020–2021. We collected 180 scat samples along 295.9 kilometers (71.1–122.4 km/site) of unpaved secondary roads and used DNA metabarcoding to determine vertebrate diet items. We identified predator species of scat using DNA metabarcoding and species-specific mtDNA fragment analysis (153 were coyote, 20 bobcat, and seven gray fox). Overall, we found evidence that two species, coyote and bobcat, consumed deer while all three consumed turkeys. Frequency of deer in the diet varied across sites for coyotes from 62–86% and wild turkey was present with a frequency of occurrence of 9% for coyotes, 5% for bobcats, and 14% for gray fox. Vertebrate diet specialization was evident across predator species with high frequency of deer in coyote diets, rabbits and small mammals in bobcat diets, and herpetofauna in gray fox diets. During deer fawning and wild turkey nesting and brood rearing, dietary overlap appears to be mediated by disparate selection of prey items, which reduced competition among coyotes, bobcats, and gray foxes. Use of DNA metabarcoding may augment our understanding of dietary preferences within this predator guild by providing increased resolution of diet composition among important game species.

59 BASIC BIOLOGICAL SCIENCES↗

WHONDRS River Corridor Sediment and Water Geochemistry and In Situ Sensor Data from Machine-Learning-Informed Sites across the Contiguous United States (v6)

This dataset supports a broader study examining hyporheic zone respiration rates to improve predictive models at a contiguous United States (CONUS) scale. The CONUS-Scale Model-Sample Study (CM) was designed following ICON (integrated, coordinated, open, and networked) principles to facilitate a model-experiment (ModEx) iteration approach, leveraging crowdsourced sampling across the CONUS. New machine learning models were created every month to guide sampling locations. Data from the resulting samples were used to test and rebuild the machine learning models for the next round of sampling guidance. Sampling began in April 2022 and ended in October 2023. In addition to the widely distributed CONUS sites, a more spatially focused sampling occurred in the Yakima River Basin, WA in summer 2022. Data from this more spatially intensive sampling occurred under the label “Second Spatial Study (SSS)” and were also included in the machine learning models. Other data types collected from SSS that were not part of CM were published in a separate data package (https://data.ess-dive.lbl.gov/view/doi:10.15485/1969566). This data package was originally published in February 2023. It was updated in June 2023 (v2; new and modified files); December 2023 (v3; new and modified files); June 2024 (v4; new and modified files); April 2024 (v5; new and modified files); and September 2025 (v6; modified files). See the change history section in the readme for more details. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. This dataset is comprised of two folders of field photos and videos, one folder of raw Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) data and one main data folder containing (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) readme; (5) international generic sample number (IGSN) mapping file; (6) field protocols; (7) a subfolder with sample data; and (8) a subfolder with sensor data. The sample data subfolder contains (1) surface water and sediment dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data and averages; (2) surface water and sediment total nitrogen data and averages; (3) surface water major cations and anions and averages; (4) sediment grain size data; (5) sediment iron (II) data and averages; (6) wet sediment mass, dry sediment mass, water mass, and wet sediment volume in incubation and sediment ICR vials; (7) sediment incubation respiration rate data and averages; (8) normalized respiration rate data and averages; (9) methods codes; (10) sediment specific surface area; (11) sediment percent carbon and nitrogen; (12) sediment gravimetric moisture and averages; (15) sediment X-ray diffraction (XRD) data; (16) sediment adenosine triphosphate (ATP) and averages; (17) a subfolder with sediment incubation respiration data, scripts, and plots; (18) surface water and sediment FTICR methods; and (19) a subfolder of 9.4 Tesla (9.4T) FTICR-MS data. This folder contains five subfolders, one containing the sediment .xml data files, one containing the water .xml files, one containing the sediment CoreMS output files, one containing the water CoreMS output files, and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS).The sensor data subfolder contains (1) a subfolder with miniDOT dissolved oxygen and temperature data and plots; (2) miniDOT dissolved oxygen and temperature summary data; and (3) miniDOT installation methods. All files are .csv, .pdf, .R, .xml, .d, .html, .Rmd, .py, .cal, .json, .jpg, .jpeg, .png, .mov, or .mp4. CORRECTION: Carbon and nitrogen content are reported as percentages. The current column headers "01395_C_percent_per_mg" and "01397_N_percent_per_mg" are incorrect. These should read "01395_C_percent" and "01397_N_percent" and will be corrected in the next version of this data package. We thank the United States Forest Service, Washington Department of Fish and Wildlife, Washington Department of Natural Resources, Cowiche Canyon Conservatory, Washington State Parks and Recreation Commission (Scientific Research Permit #210901), and the Confederated Tribes and Bands of the Yakama Nation for access to field locations where the samples labeled “SSS” were collected. We also thank the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview. WHONDRS consortium members were asked to provide any acknowledgments for the collection of samples labeled “CM” and the following is a list of acknowledgments that were submitted with their corresponding Site IDs: (MART) Research activities were conducted in part on the Wind River Experimental Forest within the Gifford Pinchot National Forest; (MP- 100379) Philadelphia is part of Lenapehoking, the ancestral homelands of the Lenape peoples; (MP-102398) Land surveyed is the ancestral homelands of the Nookhose'iinenno (Arapaho), Tsis tsis'tas (Cheyenne), and Nuuchu (Ute); (MP-100749 and MP- 100747) Georgia Coastal Ecosystem LTER, OCE-1832178; (SP-70 and SP-72) Eastern Shoshone, Shoshone-Bannock; (MP- 102944) Funded by Oregon Watershed Enhancement Board. On the traditional lands of the Confederated Tribes of the Siletz, Confederated Tribes of the Grand Rhonde, and the Clatsop-Nehalem Confederated Tribe; (MP- 100607) Holiday Creek is located on the traditional territory of the Monacan Indian Nation; (SP-45) Lafayette Blue Springs State Park; (MP-102420) NSF DEB-2016749; (MP-100019) New Hampshire Agriculture Experiment Station; (SP-35) Rayonier (land owner; https://www.rayonier.com/); (MP- 101276) US Department of Energy, Office of Science, Biological and Environmental Research, Subsurface Biogeochemical Research, Watershed Dynamics and Evolution SFA at ORNL; (MP- 103224) Watershed Dynamics and Evolution SFA at ORNL; (MP- 101584) Traditional lands of the Oceti Sakowin (Dakota, Lakota, Nakoda) and Anishinaabe Peoples.

54 ENVIRONMENTAL SCIENCES↗

Data for Stetten et al. (2025), "Biogeochemical controls on iron speciation and cycling across upland to shoreline gradients in freshwater and estuarine coastal soils (Lake Erie and Chesapeake Bay, United States)"

Coastal environments are dynamic interfaces that mediate carbon and nutrient exchanges between terrestrial landscapes and open waters, but it is unclear how biogeochemical reactions, in particular iron (Fe) redox transformations, affect the understanding and prediction of coastal ecosystem functions. This dataset includes measurements from two freshwater sites in the Western and Central basins of Lake Erie (Ohio, United States) and two estuarine sites in the Chesapeake Bay (Maryland, United States); the analytical results were reported by Stetten et al. (2025) in Science of the Total Environment. It was produced as part of the COMPASS-FME project, which seeks to advance a scalable, predictive understanding of the fundamental biogeochemical processes, ecological structure, and ecosystem dynamics that distinguish coastal terrestrial-aquatic interfaces from the purely terrestrial or aquatic systems to which they are coupled. The sites were sampled in November 2022 (CRC), December 2022 (MSM), February 2023 (GCW), and March 2023 (OWC); site codes follow those used by Pennington et al. (2025).The dataset consists of the following soil data:- Solid data (Fe concentration, etc.)- Porewater data (sulfate, sulfide, etc.)- Linear combination fitting results of X-ray absorption near edge structure (XANES) spectra; i.e., quantitative results of the oxidation state of Fe, indicated as a proportion of pure Fe(III) and Fe(II) model compounds- Linear combination fitting results of EXAFS (extended X-ray absorption fine structure) spectra, indicated as proportion of of Fe-model compounds (illite, smectite, etc.)Each data type has a single file in comma-separated value (CSV) format. No special software is required to read it.

54 ENVIRONMENTAL SCIENCES↗

Importance of Carolina Bays to the Avifauna of Pinelands in the Southeastern United States.

Abstract - Past anthropogenic activity has led to the destruction or alteration of Carolina bay wetlands throughout the southeastern United States. Presently, urban development, combined with a 2001 ruling by the US Supreme Court relaxing protection of isolated wetlands, poses an increasing threat to these and other isolated wetland systems; however, little information exists on the importance of these wetland systems to birds. We compared breeding and wintering bird communities of upland pine (Pinus spp.) forests with and without Carolina bays. Estimated species richness was greater in pine forests with Carolina bays than without during the winter (31.7 ± 1.3 [mean ± SE] vs. 26.9 ± 1.2; P = 0.027), but not in the breeding season (27.9 ± 2.2 vs. 26.3 ± 2.2; P = 0.644). Total relative abundance did not differ between pine forests with Carolina bays and those without in either the breeding (148.0 ± 16.0 vs. 129.4 ± 10.4 birds/40 ha; P = 0.675) or winter (253.0 ± 36.4 vs. 148.8 ± 15.1 birds/40 ha; P = 0.100) seasons. However, 23 species, 43% of which were wetland-dependent, were observed only in pine forests with bays during the breeding season, and 20 species, 30% of which were wetland-dependent, were observed only in such sites during winter. In contrast, only 6 and 1 species were observed only in pine forests without bays during the breeding and winter seasons, respectively, indicating that few species were negatively affected by the presence of bays. Thus, Carolina bays appear to enrich the avifauna of pine forests in the southeastern United States.

60 APPLIED LIFE SCIENCES↗

AmeriFlux FLUXNET-1F US-HWB USDA ARS Pasture Sytems and Watershed Management Research Unit- Hawbecker Site

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-HWB USDA ARS Pasture Sytems and Watershed Management Research Unit- Hawbecker Site. This is the FLUXNET version of the carbon flux data for the site US-HWB USDA ARS Pasture Sytems and Watershed Management Research Unit- Hawbecker Site produced by applying the standard ONEFlux (1F) software. Site Description - Hawbecker farm is owned by Penn State University. The farming that took place was performed by their Farm Operations Division. The ground is rolling terrain, next to wooded areas, the Beef and Sheep Reasearch Farm, The University Airport, and other large fields maintained by Farm Operations. At the time of this collection period, the site housed another Meteorological Site, a Phenocam, and the GraceNet plots. Crop Rotation during period was 2 years Alfalfa, 1 year Corn for grain and 1 year Wheat.

Goslee, Sarah↗

Crustal Strain Rates in the Western United States and Their Relationship with Earthquake Rates

Abstract We present a suite of strain rate models for the western United States based on geologic and geodetic data. The geologic data consist of Quaternary fault-slip rates and the geodetic data consists of a new compilation of Global Positioning System (GPS) velocities derived from continuous, semicontinuous, and campaign measurements. We remove postseismic deformation from the GPS time series in order for our geodetic strain rate model to best capture the interseismic strain accumulation rate. We present models based on either geologic or geodetic data, but also create a hybrid model. Although there are some differences between the models, the large-scale features are the same, with the noticeable exception for the Pacific Northwest where interseismic strain is naturally more distributed than the long-term strain release. We also present a map of earthquake rate densities based on mainshocks, and the result has similar spatial features similar to the strain rate models (at least in the southwestern United States). We perform a general correlation analysis between strain rate and seismicity rate (south of Cascadia) and find a change in linearity between seismicity and strain rates from slow to faster deforming areas with seismicity rates relatively lower for the latter. The extent of that change depends a bit on assumptions made on the declustering and completeness of the catalog, but the finding of a change in slope is robust across the different strain rate models. Linearity for all areas is only expected when Gutenberg–Richter parameters and parameters involved in the conversion from strain to moment rate are uniform across the study area. We discuss these qualifications, but find no single satisfactory explanation for our observation. Moreover, when considering a rather short time and space, theoretical considerations of sampling from a power-law distribution actually predict there to be a power law instead of a linear relationship, generally consistent with our observation.

Geochemistry & Geophysics↗

Parabolic Trough Collector Cost Update for Industrial Process Heat In The United States

Despite great potential, the worldwide adoption of concentrating solar thermal (CST) collectors for solar industrial process heat (SIPH) is modest. Industrial process heat (IPH) demands for heat and steam are typically below 300 degrees C, where CST collectors can provide the needed heat. Parabolic trough collectors (PTCs) are the most deployed CST technology for SIPH applications. This paper is focused on the United States, and a summary of known operating parabolic trough plants is shown. A previous analysis of a modern PTC in 2016 found that for SIPH applications, the installed solar field cost could be $200/m2 (2016$). Recent advances in PTC design and manufacturing have led to reduced cost per square meter of aperture area, and for a field of 510 solar collector assemblies (SCAs), the installed cost was $120/m2 (2020$). On one hand, the results from this study showed that the solar field cost for large solar fields (510 SCAs or ~804,000 m2) would increase to $184/m2 (2023$) due to post pandemic inflation and increase in metal prices. On the other hand, medium SIPH sized fields (90 SCAs or ~142,000 m2) cost analysis indicated an installed cost could be $197/m2 (2023$). When small SIPH fields (12 SCAs or ~19,000 m2) are considered, this jumps to $297/m2 (2023$). These are cost estimates for the Installed Cost of the solar fields using the United States 2023$ steel prices. When Chinese steel is used for comparison, the installed cost could be between $162 - $210/m2 for the range of SIPH sizes.

concentrating solar thermal↗