SEARCH · Engineering Papers

Results for “temperature gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

All sources NASA NTRS DOE OSTI

DOE OSTI2025

CFD modeling of natural circulation in LiCl-KCl molten salt closed loop

Characterizing flow within a molten salt closed-loop system is crucial for assessing system requirements, evaluating performance, and identifying potential flaws. Direct flow measurement using instrumentation is challenging due to extreme environmental conditions and the limitations associated with measuring molten salt flow under natural convection. Here, this study aims to provide comprehensive insights into the thermal-hydraulic behavior of a closed loop, with a particular focus on temperature distribution and velocity prediction. The Computational Fluid Dynamics (CFD) model demonstrated the capability to effectively simulate and predict both temperature distributions and flow velocities within the molten salt loop. The CFD model's predictive capability was validated by its ability to replicate temperature measurements under varying boundary conditions. The analysis revealed that the CFD model tends to underpredict temperatures in the cold leg and overpredict them in the hot leg, highlighting the need for continuous model refinement and acknowledging the limitations of using a steady-state approach. Furthermore, the potential of using external temperature measurements to estimate internal molten salt temperatures and predict flow velocity was explored, revealing that this approach could introduce up to a 5.5% error in flow velocity calculations. Line probes mapping temperature distributions across the tube's cross-section and molten salt provided valuable insights into temperature gradients, emphasizing the need for a thermal conductivity equation for molten salt with lower uncertainty to achieve more accurate temperature predictions of the system.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Theoretical and global simulation analysis of collisional microtearing modes

Microtearing modes (MTMs) are suggested as a candidate for anomalous thermal transport in tokamak H-mode discharges. This study investigates MTMs in tokamak plasmas, employing simulations in the BOUT++ framework. It simplifies and linearizes the governing equations in detailed linear simulations. The study meticulously evaluates various conductivity models under diverse plasma conditions and collision regimes. The research thoroughly assesses different conductivity models across a range of plasma conditions and collision regimes. A unified dispersion relation that includes both MTM and Drift-Alfvén Wave (DAW) instabilities is derived, showing that DAW and MTM instabilities occur at varying distances from the rational surface. Specifically, MTMs become unstable near the rational surface but stabilize farther away, while drift-Alfvén instability appears farther from the rational surface. The study also re-derives MTM dispersion relations using Ohm's law and the vorticity equation, providing a thorough analysis of electromagnetic and electrostatic interactions in tokamaks. Global simulations demonstrate an inverse correlation between MTM growth rates and collisionality, and a direct correlation with temperature gradients. The nonalignment of the rational surface with the peak ω*e stabilizes the MTMs. Nonlinear simulations highlight electron temperature relaxation as the primary saturation mechanism for MTMs, with magnetic flutter identified as the dominant mode of electron thermal transport.

Fan, K. (ORCID:0000000227518809)↗

NASA NTRS1977

Development of the data base for a degradation model of a selenide RTG

The paper is concerned with the evaluation of the materials used in a selenide radioisotope thermoelectric generator (RTG). These materials are composed of n-type gadolinium selenide and n-type copper selenide. A three-fold evaluation approach is being used: (1) the study of the rate of change of the thermal conductivity of the material, (2) the investigation of the long-term stability of the material's Seebeck voltage and electrical resistivity under current and temperature gradient conditions, and (3) determination of the physical behavior and compatibility of the material with surrounding insulation at elevated temperatures. Programmatically, the third category of characteristic evaluation is being emphasized.

Stapfer, G.↗

NASA NTRS1979

A field study of air flow and turbulent features of advection fog

The setup and initial operation of a set of specialized meteorological data collection hardware are described. To study the life cycle of advection fogs at a lake test site, turbulence levels in the fog are identified, and correlated with the temperature gradients and mean wind profiles. A meteorological tower was instrumented to allow multiple-level measurements of wind and temperature on a continuous basis. Additional instrumentation was: (1)hydrothermograph, (2)microbarograph, (3)transmissometers, and (4)a boundary layer profiler. Two types of fogs were identified, and important differences in the turbulence scales were noted.

Connell, J. D.↗

NASA NTRS1979

An energy-balance model of glaciation cycles

A one dimensional energy balance model is presented which contains a time lagged albedo to account for the delayed dependence of continental ice sheets on temperature; it also includes a smoothing of temperature gradients in the tropics to account for the effect of the Hadley circulation on the strong flattening of meridional temperature profiles there. The model exhibits finite amplitude, sustained free oscillations; these oscillations are triggered by a change in the insulation parameter and occur in the absence of any external forcing. This model behavior strongly suggests the possibility of an almost-intransitive mechanism playing a role in glaciation cycles. This behavior also occurs on shorter time scales which might be relevant to the interannual variability of the atmosphere.

Ghil, M.↗

NASA NTRS1985

Effects of dynamic heat fluxes on model climate sensitivity Meridional sensible and latent heat fluxes

The high- and low-latitude radiative-dynamic (HLRD) climatic model of Wang et al. (1984) was used to study the effect of meridional heat (MH) fluxes on climate changes caused by increases of CO2 abundance and solar constant variations. However, the empirical MH parameterization of the HLRD model was replaced by physically based parameterization, which gives separate meridional sensible and latent heat fluxes and provides a complete representation of the dependence of the flux on the mean temperature field. Both parameterization methods yielded about the same changes in global mean surface temperature and ice line, and both produced only small changes in meridional temperature gradient, although the latter were even smaller with the physically based parameterizations. At any latitude, the hemispheric mean surface temperature, rather than MH fluxes, dominates the surface temperature changes.

Gutowski, W. J., Jr.↗

NASA NTRS1987

The behavior of multiphase systems in low gravity

The motion of drops and bubbles due to interfacial tension gradients is studied. It is noted that, when a drop or bubble is inserted into a fluid possessing a temperature gradient, the resulting gradient of interfacial tension will, through viscous traction on the neighboring fluid, cause it to move. In response, the drop will propel itself in the direction of the pole with the lower interfacial tension. This phenomenon, thermocapillary migration, is discussed in detail.

Subramanian, R. Shankar↗

NASA NTRS1992

Finite difference solution for transient cooling of a radiating-conducting semitransparent layer

Transient solutions were obtained for cooling a semitransparent material by radiation and conduction. The layer is in a vacuum environment so the only means for heat dissipation is by radiation from within the medium leaving through the boundaries. Heat conduction serves only to partially equalize temperatures across the layer. As the optical thickness is increased, steep temperature gradients exist near the boundaries when conduction is relatively small. A solution procedure is required that will provide accurate temperature distributions adjacent to the boundaries, or radiative heat losses will be in error. The approach utilized numerical Gaussian integration to obtain the local radiative source term, and a finite difference procedure with variable space and time increments to solve the transient energy equation.

Siegel, Robert↗

NASA NTRS1992

Spatial and temporal temperature distribution optimization for a geostationary antenna

The Geostationary Microwave Precipitation Radiometer antenna is considered and a thermal design analysis is performed to determine a design that would minimize on-orbit antenna temporal and spatial temperature gradients. The final design is based on an optically opaque radome which covered the antenna. The average orbital antenna temperature is found to be 9 C with maximum temporal and spatial variations of 34 C and 1 C, respectively. An independent thermal distortion analysis showed that this temporal variation would give an antenna figure error of 14 microns.

Tsuyuki, G.↗

NASA NTRS2019

Twentieth Century Redistribution in Climatic Drivers of Global Tree Growth

Energy and water limitations of tree growth remain insufficiently understood at large spatiotemporal scales, hindering model representation of interannual or longer-term ecosystem processes. By assessing and statistically scaling the climatic drivers from 2710 tree-ring sites, we identified the boreal and temperate land areas where tree growth during 1930–1960 CE responded positively to temperature (20.8 ± 3.7 Mio km2; 25.9 ± 4.6%), precipitation (77.5 ± 3.3 Mio km2; 96.4 ± 4.1%), and other parameters. The spatial manifestation of this climate response is determined by latitudinal and altitudinal temperature gradients, indicating that warming leads to geographic shifts in growth limitations. We observed a significant (P < 0.001) decrease in temperature response at cold-dry sites between 1930–1960 and 1960–1990 CE, and the total temperature-limited area shrunk by −8.7 ± 0.6 Mio km2. Simultaneously, trees became more limited by atmospheric water demand almost worldwide. These changes occurred under mild warming, and we expect that continued climate change will trigger a major redistribution in growth responses to climate.

Babst, Flurin↗

NASA NTRS1994

SP-100 Thermoelectric Cell Testing at JPL

Three prototypic SP-100 thermoelectric cells, fabricated by Martin Marietta Astro Space in Valley Forge, Pennsylvania, were tested in vacuum at prototypic temperatures at JPL. Their thermal and electrical performance were characterized with 200, 300, 400, and 500 degree Celsius temperature gradients across the cell. The latter was representative of prototypic operating conditions with a 1050 degree Celsius hot side temperature and a 550 degree Celsius cold side temperature. The initial thermal and electrical performance of all three cells closely matched predictions.

thermoelectric↗

NASA NTRS1983

HOST structural analysis program overview

Hot section components of aircraft gas turbine engines are subjected to severe thermal structural loading conditions, especially during the start up and take off portions of the engine cycle. The most severe and damaging stresses and strains are those induced by the steep thermal gradients induced during the start up transient. These transient stresses and strains are also the most difficult to predict, in part because of the temperature gradients and distributions are not well known or readily predictable, and also because the cyclic elastic viscoplastic behavior of the materials at these extremes of temperature and strain are not well known or readily predictable. A broad spectrum of structures related technology programs is underway to address these deficiencies. One element of the structures program is developing improved time varying thermal mechanical load models for the entire engine mission cycle from start up to shutdown. Another major part of the program is the development of new and improved nonlinear 3-D finite elements and associated structural analysis programs, including the development of temporal elements with time dependent properties to account for creep effects in the materials and components.

Johns, R. H.↗

NASA NTRS1992

Nature of fluid flows in differentially heated cylindrical container filled with a stratified solution

Semiconductor crystals such as Hg(1-x)Cd(x)Te grown by unidirectional solidification Bridgmann method have shown compositional segregations in both the axial and radial directions. Due to the wide separation between the liquidus and the solidus of its pseudobinary phase diagram, there is a diffusion layer of higher HgTe content built up in the melt near the melt-solid interface which gives a solute concentration gradient in the axial direction. Because of the higher thermal conductivity in the melt than that in the crystal there is a thermal leakage through the fused silica crucible wall near the melt-solid interface. This gives a thermal gradient in the radial direction. Hart (1971), Thorpe, Hutt and Soulsby (1969) have shown that under such condition a fluid will become convectively unstable as a result of different diffusivities of temperature and solute. It is quite important to understand the effects of this thermosolute convection on the compositional segregation in the unidirectionally solidified crystals. To reach this goal, we start with a simplified problem. We study the nature of fluid flows of a stratified solution in a cylindrical container with a radial temperature gradient. The cylindrical container wall is considered to be maintained at a higher temperature than that at the center of the solution and the solution in the lower gravitational direction has higher solute concentration which decrease linearly to a lower concentration and then remain constant to the top of the solution. The sample solution is taken to be salt water.

Wang, Jai-Ching↗

DOE OSTI2021

Global Theory of Microtearing Modes in the Tokamak Pedestal

The pedestal of H-mode tokamaks displays strong magnetic fluctuations correlated with the evolution of the electron temperature. The microtearing mode (MTM), a temperature-gradient-driven instability that alters magnetic topology, is compatible with these observations. Here we extend the conventional theory of the MTM to include the global variation of the temperature and density profiles. The offset between the rational surface and the location of the pressure gradient maximum (μ) emerges as a crucial parameter for MTM stability. In conclusion, the extended theory matches observations on the Joint European Torus tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS2001

Quench Module Insert Capabilities and Development Test Results

The Quench Module Insert is a directional solidification furnace that will operate in the Materials Science Research Rack (MSRR) on the International Space Station. It will provide high thermal gradient and quench capabilities for processing metals and alloys in microgravity. Numerical analyses and breadboard testing conducted to date show that the QMI can produce an axial temperature gradient approaching 150 C per centimeter in a 1 centimeter diameter aluminum sample with a maximum molten sample temperature of 1100 C. Breadboard testing and analysis have also shown that the quench capabilities of the furnace are sufficient to rapidly solidify at least a 5mm axial portion of a 1 centimeter diameter molten aluminum sample in significantly less than the required 2 seconds and prevent significant backmelt. This paper presents the furnace requirements and capabilities and a status of the associated development testing and analyses.

Carswell, William E.↗

DOE OSTI2014

Digital Transfer Growth of Patterned 2D Metal Chalcogenides by Confined Nanoparticle Evaporation

Developing methods for the facile synthesis of two-dimensional (2D) metal chalcogenides and other layered materials is crucial for emerging applications in functional devices. Controlling the stoichiometry, number of the layers, crystallite size, growth location, and areal uniformity is challenging in conventional vapor phase synthesis. Here, we demonstrate a new route to control these parameters in the growth of metal chalcogenide (GaSe) and dichalcogenide (MoSe 2 ) 2D crystals by precisely defining the mass and location of the source materials in a confined transfer growth system. A uniform and precise amount of stoichiometric nanoparticles are first synthesized and deposited onto a substrate by pulsed laser deposition (PLD) at room temperature. This source substrate is then covered with a receiver substrate to form a confined vapor transport growth (VTG) system. By simply heating the source substrate in an inert background gas, a natural temperature gradient is formed that evaporates the confined nanoparticles to grow large, crystalline 2D nanosheets on the cooler receiver substrate, the temperature of which is controlled by the background gas pressure. Large monolayer crystalline domains (~ 100 m lateral sizes) of GaSe and MoSe 2 are demonstrated, as well as continuous monolayer films through the deposition of additional precursor materials. This novel PLD-VTG synthesis and processing method offers a unique approach for the controlled growth of large-area, metal chalcogenides with a controlled number of layers in patterned growth locations for optoelectronics and energy related applications.

2D layered materials↗

DOE OSTI2016

Implicit Monte Carlo with a linear discontinuous finite element material solution and piecewise non-constant opacity

Here, the non-linear thermal radiative-transfer equations can be solved in various ways. One popular way is the Fleck and Cummings Implicit Monte Carlo (IMC) method. The IMC method was originally formulated with piecewise-constant material properties. For domains with a coarse spatial grid and large temperature gradients, an error known as numerical teleportation may cause artificially non-causal energy propagation and consequently an inaccurate material temperature. Source tilting is a technique to reduce teleportation error by constructing sub-spatial-cell (or sub-cell) emission profiles from which IMC particles are sampled. Several source tilting schemes exist, but some allow teleportation error to persist. We examine the effect of source tilting in problems with a temperature-dependent opacity. Within each cell, the opacity is evaluated continuously from a temperature profile implied by the source tilt. For IMC, this is a new approach to modeling the opacity. We find that applying both source tilting along with a source tilt-dependent opacity can introduce another dominant error that overly inhibits thermal wavefronts. We show that we can mitigate both teleportation and under-propagation errors if we discretize the temperature equation with a linear discontinuous (LD) trial space. Our method is for opacities ~ 1/T 3 , but we formulate and test a slight extension for opacities ~ 1/T 3.5 , where T is temperature. We find our method avoids errors that can be incurred by IMC with continuous source tilt constructions and piecewise-constant material temperature updates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1984

Nimbus-Earth radiation budget instrument analysis

The Wide Field Of View (WFOV) Earth Flux Channels of the Nimbus Earth Radiation Budget (ERB) instrument are studied with the objective of improving the understanding and confidence in the data. Laboratory tests on flight space Earth flux subassemblies followed by a set of in flight verification procedures are examined to see if the laboratory derived correction factors produced consistent results. Intercomparisons between the WFOV data and integrated scanner data as well as other truth are used in these verificaton procedures. The main source of errors are temperature and temperature gradient related offsets. The findings led to construction of a model for the short wave WFOV channel which use instrument temperatures and temperature differences to predict or establish offsets which need to be applied to data reduction algorithms for maximum final data product accuracy.

Maschhoff, R. M.↗