SEARCH · Engineering Papers

Results for “structure determination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Dynamics of the atmospheres of the outer planets

Current knowledge about dynamics and the thermal structure of the outer planets is reviewed with the aim of identifying important measurements which should be made in the post-Voyager era. The existence of jets and cloud bands is the puzzle that underlies all others. The discussion focuses on the particular case of Jupiter because the documentation is the most complete. It is argued that the gross dynamical parameters of the outer planetary atmospheres are the keys to their behaviors, rather than the particular specifics of radiative forcing, cloud distributions, or thermodynamic transformations. Voyager data has shown that the jet systems decay with height in the region above the visible clouds. Therefore, the highest priority must be given to establishing dynamical parameters that characterize levels within and beneath the clouds. These require the determination of the deep structure of the jets, of the density stratification, and of the horizontal density contrasts. The deep regions are not easily accessible and these measurements present challenging opportunities. Indirect inferences about the controlling processes may sometimes be possible by observing waves and other activity in the more easily accessible stratosphere.

Gierasch, Peter J.↗

NASA NTRS1991

Thermal conductivity and thermal expansion of graphite fiber/copper matrix composites

The high specific conductivity of graphite fiber/copper matrix (Gr/Cu) composites offers great potential for high heat flux structures operating at elevated temperatures. To determine the feasibility of applying Gr/Cu composites to high heat flux structures, composite plates were fabricated using unidirectional and cross-plied pitch-based P100 graphite fibers in a pure copper matrix. Thermal conductivity of the composites was measured from room temperature to 1073 K, and thermal expansion was measured from room temperature to 1050 K. The longitudinal thermal conductivity, parallel to the fiber direction, was comparable to pure copper. The transverse thermal conductivity, normal to the fiber direction, was less than that of pure copper and decreased with increasing fiber content. The longitudinal thermal expansion decreased with increasing fiber content. The transverse thermal expansion was greater than pure copper and nearly independent of fiber content.

Ellis, David L.↗

NASA NTRS1993

Thermal conductivity and thermal expansion of graphite fiber-reinforced copper matrix composites

Ellis, David L.↗

NASA NTRS2017

Flow Structure Comparison for Two 7-Point LDI Configurations

This paper presents a comparison primarily of the 2-D velocity profiles in the non-burning system; and for the luminescent flame structure for a 7-point Lean Direct Injector (LDI). This circular LDI array consists of a center element surrounded by six outer elements spaced 60 degrees apart; the spacing between all adjacent elements is the same. Each element consists of simplex atomizer that injects at the throat of a converging-diverging venturi, and an axial swirler upstream of the venturi throat to generate swirl. The two configurations were: 1) one which consists of all 60 co-swirling axial air swirlers, and; 2) one configuration which uses a 60 swirler in the center, surrounded by counter-swirling 45 swirlers. Testing was done at 5 atm and an inlet temperature of 800F. Two air reference velocities were considered in the cold flow measurements and one common air flow condition for the burning case.The 2D velocity profiles were determined using particle image velocimetry and the flame structure was determined using high speed photography.

velocity↗

NASA NTRS1993

Dynamics of the atmospheres of the outer planets - Post-Voyager measurement objectives

Current knowledge about dynamics and thermal structure on the outer planets is reviewed with the aim of identifying important measurements which should be made in the post-Voyager era. The existence of jets and cloud bands is the puzzle that underlies all others. Discussion focuses on the particular case of Jupiter because documentation is most complete. Recent dynamical work has successfully reproduced much of the behavior of jets and spots with simple models that contain few parameters. It is argued that the gross dynamical parameters, such as density stratification and rotation rate, are the keys to their behaviors, rather than the particular specifics of radiative forcing, cloud distributions, thermodynamic transformations. Voyager data have shown that the jet systems decay with height in the region above the visible clouds. Therefore the highest priority must be given to establishing dynamical parameters that characterize levels within and beneath the clouds. These require determination of the deep structure of the jets, of the density stratification, and of the horizontal density contrasts. The deep regions are not easily accessible, and these measurements present challenging opportunities. Indirect inferences about the controlling processes may sometimes be possible by observing waves and other activity in the more easily accessible stratosphere, and some of these issues are also discussed.

Gierasch, Peter J.↗

NASA NTRS1999

"Ultra"-Fast Fracture Strength of Advanced Structural Ceramic Materials Studied at Elevated Temperatures

The accurate determination of inert strength is important in reliable life prediction of structural ceramic components. At ambient temperature, the inert strength of a brittle material is typically regarded as free of the effects of slow crack growth due to stress corrosion. Therefore, the inert strength can be determined either by eliminating active species, especially moisture, with an appropriate inert medium, or by using a very high test rate. However, at elevated temperatures, the concept or definition of the inert strength of brittle ceramic materials is not clear, since temperature itself is a degrading environment, resulting in strength degradation through slow crack growth and/or creep. Since the mechanism to control strength is rate-dependent viscous flow, the only conceivable way to determine the inert strength at elevated temperatures is to utilize a very fast test rate that either minimizes the time for or eliminates slow crack growth. Few experimental studies have measured the elevated-temperature, inert (or "ultra"-fast fracture) strength of advanced ceramics. At the NASA Lewis Research Center, an experimental study was initiated to better understand the "ultra"-fast fracture strength behavior of advanced ceramics at elevated temperatures. Fourteen advanced ceramics - one alumina, eleven silicon nitrides, and two silicon carbides - have been tested using constant stress-rate (dynamic fatigue) testing in flexure with a series of stress rates including the "ultra"-fast stress rate of 33 000 MPa/sec with digitally controlled test frames. The results for these 14 advanced ceramics indicate that, notwithstanding possible changes in flaw populations as well as flaw configurations because of elevated temperatures, the strength at 33 000 MPa/sec approached the room-temperature strength or reached a higher value than that determined at the conventional test rate of 30 MPa/sec. On the basis of the experimental data, it can be stated that the elevated-temperature, inert strength of an advanced ceramic material can be defined as the strength where no slow crack growth takes place at the temperature.

Choi, Sung R.↗

NASA NTRS2010

Search for Organic Nanoglobules in Carbonaceous Chondrites Using Microtomography

Primitive solar materials have various organic matters. In recent years, novel organic materials called organic nanoglobules of a few hundred micrometers in typical size were discovered in carbonaceous chondrites, IDPs, and comet 81P/Wild 2. The organic globules are spherical shape and in many cases with hollow structures. Composition of the globules are mainly aromatic carbon. The isotopic anomalies of SD and 6N 15 observed in the globules indicate that they were formed from photochemical reaction to ice particles at very low temperature environment, such as molecular clouds or outer protosolar disk. Aqueous alteration of organic matters and the gamma-ray irradiation to PAH are also suggested as alternative possible formation processes. If the globules are made from organic ice particles, the hollow regions of the globules are suggested to be once filled with volatile H20-rich organic ices, while if they were formed by aqueous alteration, the hollow regions should be filled with a fluid which caused the aqueous alteration. However, fluids in the globules have not been detected so far in the previous studies. If fluids were originally preserved in the hollows, they might be lost during destructive processes of sample separation or preparation for TEM observation. X-ray computed tomography (CT) is a nondestructive method which can determine 3-D internal structures of objects. SR (synchrotron radiation)-based imaging microtomography can give submicron spatial resolution [8] and was applied to micro textures in extraterrestrial materials, such as cometary grains captured by the Stardust mission [9]. If organic globules are observed non-destructively in carbonaceous chondrites by tomography, we can check the presence of fluids in the hollows. If fluids are preserved, we may analyze chemical and isotopic compositions of the fluids. The purpose of this study is to observe organic nanoglobules using imaging tomography for future analysis.

Matsumoto, T.↗

NASA NTRS1974

Comparative atmosphere structure experiment

Atmospheric structure of outer planets as determined by pressure, temperature, and accelerometers is reviewed and results obtained from the PAET earth entry are given. In order to describe atmospheric structure, entry is divided into two regimes, high and low speed. Acceleration is then measured: from these measurements density is determined as a function of time. The equations of motion are integrated to determine velocity, flight path angle, and altitude as a function of time. Density is then determined as a function of altitude from the previous determinations of density and altitude as a function of time. Hydrostatic equilibrium was assumed to determine pressure as a function of altitude. Finally the equation of space applied to determine temperature as a function of altitude, if the mean molecular weight is known. The mean molecular weight is obtained independently from either the low speed experiment or from the composition experiments.

Sommer, S.↗

NASA NTRS1965

Nonresonant support facilitates vibration testing of structures

An essentially frictionless four-point support system which utilizes bearings and pistons allows for determination of vibration frequencies of large structures. Retardation of vertical or horizontal motion is due to the viscous damping by the hydrostatic pressure of the oil or by adjustment of the gas volume in the accumulator.

Source record↗

NASA NTRS1984

Forbidden O II studies of galactic planetary nebulae and extragalactic H II complexes

The 3727-A doublet ratio of forbidden O II was observed in five planetary nebulae and nine extragalactic groupings of H II regions (H II Complexes). The theoretical relation between this doublet ratio and nebular density was rederived using the most up-to-date atomic parameters, permitting columnar densities to be determined for all objects. The structure of extragalactic H II Complexes is discussed, and a preferred model advanced. A new method of distance determination for extragalactic systems is proposed and evaluated in the context of the presently available data.

Odell, C. R.↗

NASA NTRS1985

Additional Results on the Radiating Properties of Ltsas and Cwsas

Results are presented on the theoretical experimental investigations of the radiating properties of Linearly Tapered Slot Antennas (LTSAs) and Constant Width Slot Antennas (CWSAs). The antenna is treated as a flared slot radiating in the presence of a conducting half plane. The aperture distribution in the flared slot is determined by approximating the tapered structure as a series of short sections of parallel slots. The slot field of a uniform slotline is determined by employing the spectral Galerkin's technique and a power conservation criterion is employed to match the fields at the step junction between two successive sections. Comparison is made between theory and experiment for several LTSAs and CWSAs etched on epsilon sub r = 2.22 and 2.55 substrates, and or flare angles 4 deg or = gamma or = 10 deg. It is shown that the theory adequately models the physics of the problem when the lateral dimension D of the antenna is large and when the propagation constant of a parallel slot line can be estimated very accurately. Newly observed effects of the lateral truncation on the radiation pattern of the antenna are discussed.

Source record↗

NASA NTRS1987

Dynamics of satellites, asteroids, and rings

Work is reported on: (1) the shapes and the internal structures of satellites; (2) the tidal heating of Miranda; (3) the dynamics of arc-like rings; and (4) the structure of the zodiacal cloud that was revealed by the Infrared Astronomy Satellite. Significant progress was made in determining the shape and internal structure of Mimas and in understanding the dynamical evolution of Miranda's orbit.

Dermott, Stanley F.↗

NASA NTRS1989

On evidence for quasi-parallel and quasi-perpendicular acceleration in supernova remnants

An attempt is made to determine whether or not the structure of supernova remnant shells is dependent on the angle between the line of sight and the Galactic magnetic field and if this structure can be explained either by quasi-parallel or quasi-perpendicular acceleration. The method used to determine the line of sight angles to the magnetic field is described. A model for the emissivity of a supernova remnant is developed.

Leckband, James A.↗

NASA NTRS1990

Cirrus structure and radiative parameters from airborne lidar and spectral radiometer observations - The 28 October 1986 FIRE study

A description is presented of cirrus based on results from a FIRE observation flight in central Wisconsin on October 28, 1986. Cirrus structure and radiative parameters as determined by the ER-2 lidar and imaging spectral radiometers are presented. From the lidar observations a complex structure was shown with differing cloud layers extending over six kilometers of altitude range. Both thin and dense cirrus layers were present and mixed phase clouds were found at lower altitudes. As indicated by the cloud structure, precipitation of crystals from high, but vertically thin, layers produces a significant fraction of the lower cirrus. Multiple layers should be considered as normal for cirrus formations. It is noted that the cloud height is an important factor for satellite cloud retrievals and cloud climatology.

Spinhirne, James D.↗

NASA NTRS1980

Applications of radar imagery to arctic and subarctic problems

Radar imagery provides year around data acquisition of areas in the Arctic and the Subarctic. The foremost factor influencing the choice of radar imagery as the major data source was the demand for neotric data. The weather is so adverse in parts of Alaska that radar imagery was the only remote sensing technique which could meet the demand. The major map products derived from radar imagery are landform maps and lineament maps. These maps are used to make environmental assessments of areas and to reconstruct the geomorphic history of certain regions or features. Since radar imagery provides information about geologic structure and geomorphic features, it can be used to determine the relationship which exists between geologic structure and geomorphology. Important geologic information related to surface roughness can be obtained through a dry snow cover. Radar imagery is the only remote sensing technique which can provide information needed about sea ice through a cloud cover and dry snow, during strong wind conditions, and throughout the Arctic night.

Cannon, P. J.↗

NASA NTRS1989

Dynamic analysis of flexible multibody structures

A system composed of several interconnected elastic components that may experience large angular motion relative to each other during operation is referred to as a flexible multibody structure. Several formulations were proposed for the determination of the dynamic response of controlled flexible multibody structures. In general, these formulations consist of superposing elastic deformations of the component body onto the large rigid body motion of the component. It was shown that this particular methodology for combining linear structural deformations with nonlinear kinematics can lead to erroneous response predictions when either the beam member is very flexible or the rotational speed is high. In addition, previous formulations introduce constraint equations to define the interrelations among system components. This approach increases the number of equations that must be solved, and may result in contraint violation when numerical error accumulates during the integration process. In order to overcome the difficulties, a new approach was suggested. The approach is essentially a finite element formulation which takes advantage of the fact that many multibody structures are joint dominated. The Large Angle Transient Dynamic Analysis (LATDYN) program for clarity of documentation, ease of use, user friendliness, modeling generality, and accuracy of results was evaluated. This required gaining a working familiarity with the code and performing several case studies.

Hernried, Alan G.↗

NASA NTRS1996

Development of Advanced Methods of Structural and Trajectory Analysis for Transport Aircraft

In this report the author describes: (1) development of advanced methods of structural weight estimation, and (2) development of advanced methods of flight path optimization. A method of estimating the load-bearing fuselage weight and wing weight of transport aircraft based on fundamental structural principles has been developed. This method of weight estimation represents a compromise between the rapid assessment of component weight using empirical methods based on actual weights of existing aircraft and detailed, but time-consuming, analysis using the finite element method. The method was applied to eight existing subsonic transports for validation and correlation. Integration of the resulting computer program, PDCYL, has been made into the weights-calculating module of the AirCraft SYNThesis (ACSYNT) computer program. ACSYNT bas traditionally used only empirical weight estimation methods; PDCYL adds to ACSYNT a rapid, accurate means of assessing the fuselage and wing weights of unconventional aircraft. PDCYL also allows flexibility in the choice of structural concept, as well as a direct means of determining the impact of advanced materials on structural weight.

Ardema, Mark D.↗

NASA NTRS2009

Estimating Relative Positions of Outer-Space Structures

A computer program estimates the relative position and orientation of two structures from measurements, made by use of electronic cameras and laser range finders on one structure, of distances and angular positions of fiducial objects on the other structure. The program was written specifically for use in determining errors in the alignment of large structures deployed in outer space from a space shuttle. The program is based partly on equations for transformations among the various coordinate systems involved in the measurements and on equations that account for errors in the transformation operators. It computes a least-squares estimate of the relative position and orientation. Sequential least-squares estimates, acquired at a measurement rate of 4 Hz, are averaged by passing them through a fourth-order Butterworth filter. The program is executed in a computer aboard the space shuttle, and its position and orientation estimates are displayed to astronauts on a graphical user interface.

Balian, Harry↗