Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Rare‐Earth Reduction in High‐Speed PM‐Assisted Synchronous Reluctance Motors Using Hybrid Magnet Strategies and Design Optimisation for 800 V EVs

The trend towards electrifying transportation systems has stimulated research endeavours aimed at developing electric machines that are not only high speed and efficient but also low‐cost and compact. To support this transition, the US Department of Energy (DOE) has established ambitious targets of $7/kW cost and 12 kW/L power density for the electric drivetrains. This paper attempts to meet these targets by proposing high‐speed permanent magnet assisted synchronous reluctance machine (PMASynRM) topologies enabled by hybrid magnet strategies, combining rare‐earth (RE) magnets with low‐cost, RE‐free alternatives. Modified 2‐layer and 3‐layer U‐shaped rotor configurations, featuring structural reinforcements to withstand high mechanical stress at elevated speeds, are developed. A multi‐objective design optimisation framework is employed to optimise the rotor design, targeting reductions in RE magnet volume, magnet demagnetisation risk and torque ripple while achieving the desired electromagnetic performance. A comprehensive analysis of the optimised rotor designs, compared against a 16,000 rpm, 800 V baseline IPM motor, shows over 70% RE reduction, demagnetisation risk below 3.5% and torque ripple under 10%. Detailed analyses of performance trends across various magnet combinations and rotor configurations highlight the viability of hybrid magnet PMASynRM designs as cost‐effective, robust and energy‐efficient solutions for next‐generation EVs.

33 ADVANCED PROPULSION SYSTEMS↗

Validation of x-ray microfocus computed tomography as an imaging tool for porous structures

X-ray microfocus computed tomography (micro-CT) is recently put forward to qualitatively and quantitatively characterize the internal structure of porous materials. However, it is known that artifacts such as the partial volume effect are inherently present in micro-CT images, thus resulting in a visualization error with respect to reality. This study proposes a validation protocol that in the future can be used to quantify this error for porous structures in general by matching micro-CT tomograms to microscopic sections. One of the innovations of the protocol is the opportunity to reconstruct an interpolated micro-CT image under the same angle as the physical cutting angle of the microscopic sections. Also, a novel thresholding method is developed based on matching micro-CT and microscopic images. In this study, titanium porous structures are assessed as proof of principle. It is concluded for these structures that micro-CT visualizes 89% of the total amount of voxels (solid and pore) correctly. However, 8% represents an overestimation of the real structure and 3% are real structural features not visualized by micro-CT. When exclusively focusing on the solid fraction in both the micro-CT and microscopic images, only an overestimation of about 5% is found.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Surface photovoltage spectroscopy analyses of Cd{sub 1-x}Zn{sub x}Te

Cd{sub 1-x}Zn{sub x}Te alloys have been studied by surface photovoltage spectroscopy (SPS) and energy dispersive spectroscopy (EDS). The analyses of surface photovoltage spectra have been perfomed at near and above band gap energies. Surface recombination effects on the surface photovoltage have been investigated. SPS analyses of Cd{sub 1-x}Zn{sub x}Te alloys with different surface conditions have shown that the surface recombination velocity significantly affects the SPS determination of the material band gap. Accounting for this and preparing the surfaces accordingly, SPS spectra of Cd{sub 1-x}Zn{sub x}Te samples have allowed an accurate determination of the optical band gap as a function of the Zn concentration, determined via EDS analyses. The local increases in the density of states associated with band structure features in Cd{sub 1-x}Zn{sub x}Te alloys have been investigated by SPS spectra in the above band gap energy range.

36 MATERIALS SCIENCE↗

On the Hermitian Projective Line as a Home for the Geometry of Quantum Theory

In the paper [1], generalized projective geometries have been proposed as a framework for a geometric formulation of Quantum Theory. In the present note, we refine this proposition by discussing further structural features of Quantum Theory: the link with associative involutive algebras A and with Jordan-Lie and Lie-Jordan algebas. The associated geometries are (Hermitian) projective lines over A; their axiomatic definition and theory will be given in subsequent work with M. Kinyon [2].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

UV photodissociation of methyl bromide and methyl bromide cation studied by velocity map imaging

We employ the velocity map imaging technique to measure kinetic energy and angular distributions of state selected CH{sub 3} (v{sub 2}=0,1,2,3) and Br ({sup 2}P{sub 3/2}, {sup 2}P{sub 1/2}) photofragments produced by methyl bromide photolysis at 215.9 nm. These results show unambiguously that the Br and Br* forming channels result in different vibrational excitations of the umbrella mode of the methyl fragment. Low energy structured features appear on the images, which arise from CH{sub 3}Br{sup +} photodissociation near 330 nm. The excess energy of the probe laser photon is channeled into CH{sub 3}{sup +} vibrational excitation, most probably in the {nu}{sub 4} degenerate bend.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ultralow dielectric losses in pyrochlore films of the PbO-MgO-Nb{sub 2}O{sub 5}-TiO{sub 2} system

(1-x)Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-xPbTiO{sub 3} (PMNT) (with x=0.1) thin films were prepared on Pt-coated silicon substrates by radio-frequency magnetron sputtering and postdeposition annealing method. A well-crystallized pyrochlore phase structure, which started to nucleate and grow at 450-500 deg. C, was formed in the PMNT thin films. These pyrochlore-structured PMNT thin films show ultralow dielectric losses with a typical loss tangent as low as 0.001, accompanied by a relatively high dielectric constant ({epsilon}{sub r}=176). Such an extremely low dielectric loss, having never been obtained in thin films of perovskite PMNT, is probably ascribed to the specific structural feature of pyrochlore phase, chemically different from its perovskite counterpart, and ascribed to the avoidance of the polar domain-related losses.

36 MATERIALS SCIENCE↗

DAMAGE DEVELOPMENT IN HIGH PURITY COPPER UNDER VARYING DYNAMIC CONDITIONS AND MICROSTRUCTURAL STATES USING CONTINUUM DAMAGE MECHANICS

In the framework of CDM, the evolution of the plastic strain, at which damage processes initiates, as a function of stress triaxiality, making the assumption of constant damage dissipated work is derived. Based on this, the CDM model proposed by Bonora (Eng. Frac. Mech., 58, 1-2, 1997) has been used to predict the occurrence of ductile failure at different stress triaxiality conditions, under both quasi-static and dynamic loading conditions. This solution allows the possibility to correctly predict the conditions for which ductile damage can initiate under uniaxial strain (such as that for the flyer plate impact test) and mixed conditions such as those in the Taylor impact test. The solution offers the possibility to correlate continuum damage model parameters to micro structural features such as grain size and purity grade.

36 MATERIALS SCIENCE↗

Non-Conventional Applications of Computerized Tomography: Analysis of Solid Dosage Forms Produced by Pharmaceutical Industry

X-ray computed tomography (CT) refers to the cross-sectional imaging of an object measuring the transmitted radiation at different directions. In this work, we describe a non-conventional application of computerized tomography: visualization and improvements in the understanding of some internal structural features of solid dosage forms. A micro-CT X-ray scanner, with a minimum resolution of 30 mum was used to characterize some pharmaceutical tablets, granules, controlled-release osmotic tablet and liquid-filled soft-gelatin capsules. The analysis presented in this work are essentially qualitative, but quantitative parameters, such as porosity, density distribution, tablets dimensions, etc. could also be obtained using the related CT techniques.

07 ISOTOPE AND RADIATION SOURCES↗

Alternative synthetic routes for the preparation of PLA/montmorillonite nanocomposites

Although the improvement of tensile Modulus and thermal stability due to the addition of innovative organoclays to PLA were negligible, our investigation allowed to evidence that the preliminary preparation of an inorganic rich composite through in situ polymerization of lactyde gave a final morphology improved with respect to that achieved by simply melt dispersing organoclay powder. Anyway the former preparation method should be further investigated in order to control PLA structural features resulting from the ring opening polymerization synthesis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and characterization of RF sputtered Ce-V mixed oxide thin films

Cerium-Vanadium mixed oxide thin films were deposited at room temperature by varying RF power in RF magnetron sputtering. The morphology and structural features were studied by taking FESEM and XRD and optical properties were analyzed by taking transmittance and absorption spectra. The crystalline film shows orthorhombic CeVO{sub 3} phase and the observed grain size varies from 89.4nm to 208.7nm. The transmission increases and the absorption edge at 330nm is blue shifted with increase in RF power. The optical band gap is found to increase from 1.59 to 1.94eV. The PL spectra shows blue shift in the emission peak centered at a wavelength of 495nm with increase in RF power.

36 MATERIALS SCIENCE↗

Dynamics of ligand exchange mechanism at Cu(II) in water: An ab initio quantum mechanical charge field molecular dynamics study with extended quantum mechanical region

Ab initio quantum mechanical charge field molecular dynamics (QMCF-MD) were successfully applied to Cu(II) embedded in water to elucidate structure and to understand dynamics of ligand exchange mechanism. From the simulation studies, it was found that using an extended large quantum mechanical region including two shells of hydration is required for a better description of the dynamics of exchanging water molecules. The structural features characterized by radial distribution function, angular distribution function and other analytical parameters were consistent with experimental data. The major outcome of this study was the dynamics of exchange mechanism and reactions in the first hydration shell that could not be studied so far. The dynamical data such as mean residence time of the first shell water molecules and other relevant data from the simulations are close to the results determined experimentally. Another major characteristic of hydrated Cu(II) is the Jahn-Teller distortion which was also successfully reproduced, leading to the final conclusion that the dominating aqua complex is a 6-coordinated species. The ab initio QMCF-MD formalism proved again its capabilities of unraveling even ambiguous properties of hydrated species that are far difficult to explore by any conventional quantum mechanics/molecular mechanics (QM/MM) approach or experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase stability, mechanical properties, hardness, and possible reactive routing of chromium triboride from first-principle investigations

The first-principles calculations are employed to provide a fundamental understanding of the structural features and relative stability, mechanical and electronic properties, and possible reactive route for chromium triboride. The predicted new phase of CrB{sub 3} belongs to the rhombohedral phase with R-3m symmetry and it transforms into a hexagonal phase with P-6m2 symmetry at 64 GPa. The mechanical and thermodynamic stabilities of CrB{sub 3} are verified by the calculated elastic constants and formation enthalpies. Also, the full phonon dispersion calculations confirm the dynamic stability of predicted CrB{sub 3}. Considering the role of metallic contributions, the calculated hardness values from our semiempirical method for rhombohedral and hexagonal phases are 23.8 GPa and 22.1 GPa, respectively. In addition, the large shear moduli, Young's moduli, low Poisson's ratios, and small B/G ratios indicate that they are potential hard materials. Relative enthalpy calculations with respect to possible constituents are also investigated to assess the prospects for phase formation and an attempt at high-pressure synthesis is suggested to obtain chromium triboride.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation on visible quantum cutting of Tb{sup 3+} in oxide hosts

Visible quantum cutting (QC) through downconversion was observed upon 4f{sup 8}-4f{sup 7}5d{sup 1} excitation of Tb{sup 3+} in both BaGdB{sub 9}O{sub 16} and Ca{sub 8}MgGd(PO{sub 4}){sub 7} compounds. The QC involves a cross relaxation process between two neighboring Tb{sup 3+}. Modified and new QC models are proposed based on the QC mechanisms in Gd{sup 3+}-Tb{sup 3+} system. Two calculation equations for the cross relaxation efficiency are suggested according to the energy transfer theory and spectral results. By studying the spectral characteristics of Tb{sup 3+} in hosts from fluoride to oxide, it indicates that the visible QC in Gd{sup 3+}-Tb{sup 3+} system may occur mainly depending on the structural features of phosphors, rather than the phonon energies of matrixes. All of the above conclusions have meaning of guidance for investigating other phosphors with QC phenomenon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, vibrational, and elastic properties of a calcium aluminosilicate glass from molecular dynamics simulations: The role of the potential

We study a calcium aluminosilicate glass of composition (SiO{sub 2}){sub 0.60}(Al{sub 2}O{sub 3}){sub 0.10}(CaO){sub 0.30} by means of molecular dynamics. To this end, we conduct parallel simulations, following a consistent methodology, but using three different potentials. Structural and elastic properties are analyzed and compared to available experimental data. This allows assessing the respective abilities of the potentials to produce a realistic glass. We report that, although all these potentials offer a reasonable glass structure, featuring tricluster oxygen atoms, their respective vibrational and elastic predictions differ. This allows us to draw some general conclusions about the crucial role, or otherwise, of the interaction potential in silicate systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elastic anisotropy and shear-induced atomistic deformation of tetragonal silicon carbon nitride

First-principles calculations are employed to provide a fundamental understanding of the structural features, elastic anisotropy, shear-induced atomistic deformation behaviors, and its electronic origin of the recently proposed superhard t-SiCN. According to the dependences of the elastic modulus on different crystal directions, the t-SiCN exhibits a well-pronounced elastic anisotropy which may impose certain limitations and restrictions on its applications. The further mechanical calculations demonstrated that t-SiCN shows lower elastic moduli and ideal shear strength than those of typical hard substances of TiN and TiC, suggesting that it cannot be intrinsically superhard as claimed in the recent works. We find that the failure modes of t-SiCN at the atomic level during shear deformation can be attributed to the breaking of C-C bonds through the bonding evolution and electronic localization analyses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphene: A partially ordered non-periodic solid

Molecular dynamics simulations were performed to study the structural features of graphene over a wide range of temperatures from 50 to 4000 K using the PPBE-G potential [D. Wei, Y. Song, and F. Wang, J. Chem. Phys. 134, 184704 (2011)]. This potential was developed by force matching the Perdew-Burke-Ernzerhof (PBE) exchange correlation functional and has been validated previously to provide accurate potential energy surface for graphene at temperatures as high as 3000 K. Simulations with the PPBE‑G potential are the best available approximation to a direct Car-Parrinello Molecular Dynamics study of graphene. One advantage of the PBE-G potential is to allow large simulation boxes to be modeled efficiently so that properties showing strong finite size effects can be studied. Our simulation box contains more than 600 000 C atoms and is one of the largest graphene boxes ever modeled. With the PPBE-G potential, the thermal-expansion coefficient is negative up to 4000 K. With a large box and an accurate potential, the critical exponent for the scaling properties associated with the normal-normal and height-height correlation functions was confirmed to be 0.85. This exponent remains constant up to 4000 K suggesting graphene to be in the deeply cooled regime even close to the experimental melting temperature. The reduced peak heights in the radial distribution function of graphene show an inverse power law dependence to distance, which indicates that a macroscopic graphene sheet will lose long-range crystalline order as predicted by the Mermin-Wagner instability. Although graphene loses long-range translational order, it retains long range orientational order as indicated by its orientational correlation function; graphene is thus partially ordered but not periodic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of structural and electrical properties of Lu{sub 2}O{sub 3} and Lu{sub 2}TiO{sub 5} gate dielectrics for α-InGaZnO thin-film transistors

We compared the structural properties and electrical characteristics of high-κ Lu{sub 2}O{sub 3} and Lu{sub 2}TiO{sub 5} gate dielectrics for amorphous indium-gallium-zinc oxide (α-InGaZnO) thin-film transistor (TFT) applications. The Lu{sub 2}O{sub 3} film has a strong Lu{sub 2}O{sub 3} (400) peak in the X-ray diffraction pattern, while the Lu{sub 2}TiO{sub 5} sample shows a relatively weak Lu{sub 2}TiO{sub 5} (102) peak. Atomic force microscopy reveals that the Lu{sub 2}O{sub 3} dielectric exhibits a rougher surface (about three times) than Lu{sub 2}TiO{sub 5} one. In X-ray photoelectron spectroscopy analysis, we found that the intensity of the O 1s peak corresponding to Lu(OH){sub x} for Lu{sub 2}O{sub 3} film was higher than that of Lu{sub 2}TiO{sub 5} film. Furthermore, compared with the Lu{sub 2}O{sub 3} dielectric, the α-InGaZnO TFT using the Lu{sub 2}TiO{sub 5} gate dielectric exhibited a lower threshold voltage (from 0.43 to 0.25 V), a higher I{sub on}/I{sub off} current ratio (from 3.5 × 10{sup 6} to 1.3 × 10{sup 8}), a smaller subthreshold swing (from 276 to 130 mV/decade), and a larger field-effect mobility (from 14.5 to 24.4 cm{sup 2}/V s). These results are probably due to the incorporation of TiO{sub x} into the Lu{sub 2}O{sub 3} film to form a Lu{sub 2}TiO{sub 5} structure featuring a smooth surface, a low moisture absorption, a high dielectric constant, and a low interface state density at the oxide/channel interface. Furthermore, the stability of Lu{sub 2}O{sub 3} and Lu{sub 2}TiO{sub 5} α-InGaZnO TFTs was investigated under positive gate-bias stress (PGBS) and negative gate-bias stress (NGBS). The threshold voltage of the TFT performed under NGBS is more degradation than that under PGBS. This behavior may be attributed to the electron charge trapping at the dielectric–channel interface under PGBS, whereas the oxygen vacancies occurred in the InGaZnO under NGBS.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Planar dicyclic B{sub 6}S{sub 6}, B{sub 6}S{sub 6}{sup −}, and B{sub 6}S{sub 6}{sup 2−} clusters: Boron sulfide analogues of naphthalene

Inorganic analogues of hydrocarbons or polycyclic aromatic hydrocarbons (PAHs) are of current interest in chemistry. Based upon global structural searches and B3LYP and CCSD(T) calculations, we present herein the perfectly planar dicyclic boron sulfide clusters: D{sub 2h} B{sub 6}S{sub 6} (1, {sup 1}A{sub g}), D{sub 2h} B{sub 6}S{sub 6}{sup −} (2, {sup 2}B{sub 3u}), and D{sub 2h} B{sub 6}S{sub 6}{sup 2−} (3, {sup 1}A{sub g}). These are the global minima of the systems, being at least 0.73, 0.81, and 0.53 eV lower in energy, respectively, than their alternative isomers at the CCSD(T) level. The D{sub 2h} structures feature twin B{sub 3}S{sub 2} five-membered rings, which are fused together via a B{sub 2} unit and terminated by two BS groups. Bonding analyses show that the closed-shell B{sub 6}S{sub 6}{sup 2−} (3) cluster possesses 10 delocalized π electrons, closely analogous to the bonding pattern of the aromatic naphthalene C{sub 10}H{sub 8}. The B{sub 6}S{sub 6}{sup −} (2) and B{sub 6}S{sub 6} (1) species are readily obtained upon removal of one or two π electrons from B{sub 6}S{sub 6}{sup 2−} (3). The results build a new analogous relationship between boron sulfide clusters and their PAH counterparts. The B{sub 6}S{sub 6}{sup −} (2) monoanion and B{sub 6}S{sub 6}{sup 2−} (3) dianion can be effectively stabilized in neutral LiB{sub 6}S{sub 6} and Li{sub 2}B{sub 6}S{sub 6} salts, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗