Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “predictive simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Simulations of slow positron production using a low-energy electron accelerator

Monte Carlo simulations of slow positron production via energetic electron interaction with a solid target have been performed. The aim of the simulations was to determine the expected slow positron beam intensity from a low-energy, high-current electron accelerator. By simulating (a) the fast positron production from a tantalum electron-positron converter and (b) the positron depth deposition profile in a tungsten moderator, the slow positron production probability per incident electron was estimated. Normalizing the calculated result to the measured slow positron yield at the present AIST linear accelerator, the expected slow positron yield as a function of energy was determined. For an electron beam energy of 5 MeV (10 MeV) and current 240 {mu}A (30 {mu}A), production of a slow positron beam of intensity 5 x 10{sup 6} s{sup -1} is predicted. The simulation also calculates the average energy deposited in the converter per electron, allowing an estimate of the beam heating at a given electron energy and current. For low-energy, high-current operation the maximum obtainable positron beam intensity will be limited by this beam heating.

43 PARTICLE ACCELERATORS↗

Nonlinear low-frequency electrostatic wave dynamics in a two-dimensional quantum plasma

The problem of two-dimensional arbitrary amplitude low-frequency electrostatic oscillation in a quasi-neutral quantum plasma is solved exactly by elementary means. In such quantum plasmas we have treated electrons quantum mechanically and ions classically. The exact analytical solution of the nonlinear system exhibits the formation of dark and black solitons. Numerical simulation also predicts the possible periodic solution of the nonlinear system. Nonlinear analysis reveals that the system does have a bifurcation at a critical Mach number that depends on the angle of propagation of the wave. The small-amplitude limit leads to the formation of weakly nonlinear Kadomstev–Petviashvili solitons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Raising gradient limitations in 2.1 GHz superconducting photonic band gap accelerator cavities

We report results from recent 2.1 GHz superconducting radio frequency (SRF) photonic band gap (PBG) resonator experiments at Los Alamos. Two 2.1 GHz PBG cells with elliptical rods were fabricated and tested at high power in a liquid helium bath at the temperatures of 4 K and below 2 K. The described SRF PBG cells were designed with a particular emphasis on changing the shape of the PBG rods to reduce peak surface magnetic fields and at the same time to preserve its effectiveness at damping higher-order-modes. The superconducting PBG cavities have great potential for damping long-range wakefields in SRF accelerator structures without affecting the fundamental accelerating mode. The cells performed in accordance with simulation's predictions and the maximum achieved accelerating gradient was 18.3 MV/m. This represents a 30% increase over gradients previously demonstrated in superconducting PBG cavities with round rods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computational Fluid Dynamics Analysis of Flexible Duct Junction Box Design

IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics (CFD) simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance. Current Air Conditioning Contractors of America (ACCA) guidance (Group 11, Appendix 3, ACCA Manual D, Rutkowski 2009) allows for unconstrained variation in the number of takeoffs, box sizes, and takeoff locations. The only variables currently used in selecting an equivalent length (EL) are velocity of air in the duct and friction rate, given the first takeoff is located at least twice its diameter away from the inlet. This condition does not account for other factors impacting pressure loss across these types of fittings. For each simulation, the IBACOS team converted pressure loss within a box to an EL to compare variation in ACCA Manual D guidance to the simulated variation. IBACOS chose cases to represent flows reasonably correlating to flows typically encountered in the field and analyzed differences in total pressure due to increases in number and location of takeoffs, box dimensions, and velocity of air, and whether an entrance fitting is included. The team also calculated additional balancing losses for all cases due to discrepancies between intended outlet flows and natural flow splits created by the fitting. In certain asymmetrical cases, the balancing losses were significantly higher than symmetrical cases where the natural splits were close to the targets. Thus, IBACOS has shown additional design constraints that can ensure better system performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

New Insights for Improving the Designs of Flexible Duct Junction Boxes (Fact Sheet)

IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics (CFD) simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance. Current Air Conditioning Contractors of America (ACCA) guidance (Group 11, Appendix 3, ACCA Manual D, Rutkowski 2009) allows for unconstrained variation in the number of takeoffs, box sizes, and takeoff locations. The only variables currently used in selecting an equivalent length (EL) are velocity of air in the duct and friction rate, given the first takeoff is located at least twice its diameter away from the inlet. This condition does not account for other factors impacting pressure loss across these types of fittings. For each simulation, the IBACOS team converted pressure loss within a box to an EL to compare variation in ACCA Manual D guidance to the simulated variation. IBACOS chose cases to represent flows reasonably correlating to flows typically encountered in the field and analyzed differences in total pressure due to increases in number and location of takeoffs, box dimensions, and velocity of air, and whether an entrance fitting is included. The team also calculated additional balancing losses for all cases due to discrepancies between intended outlet flows and natural flow splits created by the fitting. In certain asymmetrical cases, the balancing losses were significantly higher than symmetrical cases where the natural splits were close to the targets. Thus, IBACOS has shown additional design constraints that can ensure better system performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Computational Fluid Dynamics Analysis of Flexible Duct Junction Box Design

IBACOS explored the relationships between pressure and physical configurations of flexible duct junction boxes by using computational fluid dynamics (CFD) simulations to predict individual box parameters and total system pressure, thereby ensuring improved HVAC performance. Current Air Conditioning Contractors of America (ACCA) guidance (Group 11, Appendix 3, ACCA Manual D, Rutkowski 2009) allows for unconstrained variation in the number of takeoffs, box sizes, and takeoff locations. The only variables currently used in selecting an equivalent length (EL) are velocity of air in the duct and friction rate, given the first takeoff is located at least twice its diameter away from the inlet. This condition does not account for other factors impacting pressure loss across these types of fittings. For each simulation, the IBACOS team converted pressure loss within a box to an EL to compare variation in ACCA Manual D guidance to the simulated variation. IBACOS chose cases to represent flows reasonably correlating to flows typically encountered in the field and analyzed differences in total pressure due to increases in number and location of takeoffs, box dimensions, and velocity of air, and whether an entrance fitting is included. The team also calculated additional balancing losses for all cases due to discrepancies between intended outlet flows and natural flow splits created by the fitting. In certain asymmetrical cases, the balancing losses were significantly higher than symmetrical cases where the natural splits were close to the targets. Thus, IBACOS has shown additional design constraints that can ensure better system performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Utilizing a Novel Acoustic Backscatter Array to Characterize Waste Consolidation and Settling in a Horizontal Flow Clarifier - 16051

As part of a collaboration between the University of Leeds, Sellafield Ltd and MMI Engineering Ltd, bespoke acoustic instrumentation and numerical simulation methods have been established to optimize nuclear legacy waste transfers. Specifically, a new ultrasonic measurement system has been developed, allowing suspended particle concentration and consolidation to be measured remotely. This technology has been combined with computational fluid dynamics (CFD) modelling of settling particulate systems, permitting full characterization, simulation and prediction of sludge separation processes. Presented here are experimental and numerical results on the transport and settling behavior of non-active nuclear-analogue suspensions in two flow geometries: gravitational settling of glass dispersions in a 250-liter column; and transport and sedimentation of flocculated calcite in a close-to-full-scale clarifier (9 m{sup 3} total volume and 4.8 m{sup 2} length). In addition, details of the design, construction and calibration of a custom-built Ultrasonic Array Research Platform (UARP) are described. Settling column results suggested that particle concentration changes could be simulated with good accuracy by a CFD model (developed using the open source OpenFOAM framework) when compared to measured samples. Large-scale clarifier trials were used to assess the effectiveness of the UARP controller with an attached in situ acoustic backscatter array (ABA). The ABA consisted of 8 transducers angled down at 20 deg. to the vertical, pulsing at 2-2.5 MHz in cycles (covering 1.8 m total depth). In comparison to a range of sampled concentrations across the length of the clarifier, results confirmed that the UARP-ABA system was highly successful at characterizing these complex flows over several hours of operation, allowing visualization of depth-wise bulk density changes and bed build-up over time. Collectively, this work highlights the capability of these tools to monitor and optimize a number of current waste transfer operations at Sellafield, with further potential applications for solid-liquid separations across waste, water treatment and minerals engineering industries. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Elastic Properties of Plasma-Exposed Tungsten Predicted by Molecular-Dynamics Simulations

We report results of systematic molecular-dynamics computations of the elastic properties of single-crystalline tungsten containing structural defects, voids and overpressurized He nanobubbles, related to plasma exposure of tungsten serving as a plasma- facing component (PFC) in nuclear fusion devices. Our computations reveal that the empty voids are centers of dilatation resulting in development of tensile stress in the tungsten matrix, whereas He-filled voids (nanobubbles) introduce compressive stress in the plasma-exposed tungsten. We find that the dependence of the elastic moduli of plasma-exposed tungsten, namely, the bulk, Young, and shear modulus, on its void fraction follows a universal exponential scaling relation. We also find that the elastic moduli of plasma-exposed tungsten soften substantially as a function of He content in the tungsten matrix, following an exponential scaling relation; this He-induced exponential softening is in addition to the softening caused in the matrix with increasing temperature. A systematic characterization of the dependence of the elastic moduli on the He bubble size reveals that He bubble growth affects significantly both the bulk modulus and the Poisson ratio of plasma-exposed tungsten, while its effect on the Young and shear moduli of the plasma-exposed material is weak. Our findings contribute directly to the development of a structure-properties database that is required for the predictive modeling of the dynamical response of PFCs in nuclear fusion devices.

36 MATERIALS SCIENCE↗

SURVEY SIMULATIONS OF A NEW NEAR-EARTH ASTEROID DETECTION SYSTEM

We have carried out simulations to predict the performance of a new space-based telescopic survey operating at thermal infrared wavelengths that seeks to discover and characterize a large fraction of the potentially hazardous near-Earth asteroid (NEA) population. Two potential architectures for the survey were considered: one located at the Earth–Sun L1 Lagrange point, and one in a Venus-trailing orbit. A sample cadence was formulated and tested, allowing for the self-follow-up necessary for objects discovered in the daytime sky on Earth. Synthetic populations of NEAs with sizes as small as 140 m in effective spherical diameter were simulated using recent determinations of their physical and orbital properties. Estimates of the instrumental sensitivity, integration times, and slew speeds were included for both architectures assuming the properties of newly developed large-format 10 μm HgCdTe detector arrays capable of operating at ∼35 K. Our simulation included the creation of a preliminary version of a moving object processing pipeline suitable for operating on the trial cadence. We tested this pipeline on a simulated sky populated with astrophysical sources such as stars and galaxies extrapolated from Spitzer Space Telescope and Wide-field Infrared Explorer data, the catalog of known minor planets (including Main Belt asteroids, comets, Jovian Trojans, planets, etc.), and the synthetic NEA model. Trial orbits were computed for simulated position-time pairs extracted from the synthetic surveys to verify that the tested cadence would result in orbits suitable for recovering objects at a later time. Our results indicate that the Earth–Sun L1 and Venus-trailing surveys achieve similar levels of integral completeness for potentially hazardous asteroids larger than 140 m; placing the telescope in an interior orbit does not yield an improvement in discovery rates. This work serves as a necessary first step for the detailed planning of a next-generation NEA survey.

79 ASTRONOMY AND ASTROPHYSICS↗

CHANDRA OBSERVATIONS OF THE COLLISIONAL RING GALAXY NGC 922

In this paper, we report on Chandra observations of the starburst galaxy NGC 922. NGC 922 is a drop-through ring galaxy with an expanding ring of star formation, similar in many respects to the Cartwheel galaxy. The Cartwheel galaxy is famous for hosting 12 ultraluminous X-ray sources (ULXs), most of which are in the star-forming ring. This is the largest number of ULXs seen in a single system and has led to speculation that the low metallicity of the Cartwheel (0.3 Z{sub Sun }) may optimize the conditions for ULX formation. In contrast, NGC 922 has metallicity near solar. The Chandra observations reveal a population of bright X-ray sources, including seven ULXs. The number of ULXs in NGC 922 and the Cartwheel scales with the star formation rate: we do not find any evidence for an excess of sources in the Cartwheel. Simulations of the binary population in these galaxies suggest that the ULX population in both systems is dominated by systems with strong wind accretion from supergiant donors onto direct-collapse black holes. The simulations correctly predict the ratio of the number of sources in NGC 922 and the Cartwheel. Thus, it would appear that the metallicity of the Cartwheel is not low enough to see a difference in the ULX population compared to NGC 922.

79 ASTRONOMY AND ASTROPHYSICS↗

Statistical methods for design and testing of 3D-printed polymers

Different statistical methods are used in various fields to qualify processes and products, especially in emerging technologies like Additive Manufacturing (AM) or 3D printing. Since several statistical methods are being employed to ensure quality production of the 3D-printed parts, an overview of these methods used in 3D printing for different purposes is presented in this paper. The advantages and challenges, to understanding the importance it brings for design and testing optimization of 3D-printed parts are also discussed. The application of different metrology methods is also summarized to guide future researchers in producing dimensionally-accurate and good-quality 3D-printed parts. Here, this review paper shows that the Taguchi Methodology is the commonly-used statistical tool in optimizing mechanical properties of the 3D-printed parts, followed by Weibull Analysis and Factorial Design. In addition, key areas such as Artificial Intelligence (AI), Machine Learning (ML), Finite Element Analysis (FEA), and Simulation require more research for improved 3D-printed part qualities for specific purposes. Future perspectives are also discussed, including other methods that can help further improve the overall quality of the 3D printing process from designing to manufacturing.

36 MATERIALS SCIENCE↗

First-Principles-Based Computational Study on Nucleation and Growth Mechanisms of U on Mo(110) Surface Solvated in an Eutectic LiCl-KCl Molten Salt

In nuclear engineering and industry electrochemical methods have been intensively employed in pyro-processing technology to recycle used nuclear fuels for substantial alleviation of the concern with the safe treatment of high-level radioactive nuclear wastes. Pyro-processing is based on sequential electrochemical reactions at high temperature (typically above 700 K at ambient pressure) to enhance the efficiency for decoupling nuclear fuels from unfavorable fission fragments. Using a molten salt in electrorefining process, at which actinides can be selectively deposited in solid cathode from ionic states, gives several advantages over an aqueous solution: higher thermal conductivity (it is liquid phase at high temperature, molten salt plays a role as medium at high temperature over 773 K in electrochemical reaction, lower kinetic barrier in ionic diffusion mobility and better stability against undesired side reactions with radioactive materials. Therefore, the volume of high-level nuclear wastes to be, otherwise, disposed into secured sites is dramatically reduced. Most of all it conforms to nuclear non-proliferation treaty. Electrochemical reactions in a molten salt medium are, however, much more complicated than in aqueous solution rendering the accurate understanding of thermodynamic and kinetic properties formidably challenging. It is represented by extensive researches in experiments and computations to identify underlying mechanisms on how U and other fission fragments behave in the electrorefining system. Regardless of the researches there is a general agreement that the initial stage of the nucleation and growth process of the U deposit is critical for determining the properties of final product and the electrorefining efficiency. In spite of the focused studies it still remains unclear. Theoretical and computational researches have been often carried out with various empirical parameter for interatomic potential energy, which are unknown variables until numerical fits to experimental measurements or just assumption is made. Thus, empirical simulations sometimes predicted outcomes are inconsistent depending on materials of interest with experimental measurements. This may be largely because the accuracy of an empirical interatomic potential energy models critically depends on the input parameters and thus, can be limited in transferability of the results. Furthermore, it may be devoid of fundamental physics or chemistry. This situation requires special caution when an electrorefining system is studied to recycle spent nuclear fuels because of the extreme difficulty in reliable acquisition of thermodynamic and kinetic data from direct experimental measurements. In this presentation, we extensively utilized first principles density functional theory (DFT) calculations and ab-initio molecular dynamic (AIMD) simulations to figure out underlying mechanisms of the initial stage of nucleation and growth behaviors of U on Mo(110) surface in a eutectic LiCl-KCl molten salt at T = 773 K. To rigorously investigate the effect of the molten salt electrolyte we compared the results with those calculated under vacuum condition.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

FORMATION OF LATE-TYPE SPIRAL GALAXIES: GAS RETURN FROM STELLAR POPULATIONS REGULATES DISK DESTRUCTION AND BULGE GROWTH

Spiral galaxies have most of their stellar mass in a large rotating disk, and only a modest fraction in a central spheroidal bulge. This challenges present models of galaxy formation: galaxies form at the center of dark matter halos through a combination of hierarchical merging and gas accretion along cold streams. Cosmological simulations thus predict that galaxies rapidly grow their bulge through mergers and instabilities and end up with most of their mass in the bulge and an angular momentum much below the observed level, except in dwarf galaxies. We propose that the continuous return of gas by stellar populations over cosmic times could help to solve this issue. A population of stars formed at a given instant typically returns half of its initial mass in the form of gas over 10 billion years, and the process is not dominated by supernovae explosions but by the long-term mass-loss from low- and intermediate-mass stars. Using simulations of galaxy formation, we show that this gas recycling can strongly affect the structural evolution of massive galaxies, potentially solving the bulge fraction issue, as the bulge-to-disk ratio of a massive galaxy can be divided by a factor of 3. The continuous recycling of baryons through star formation and stellar mass loss helps the growth of disks and their survival to interactions and mergers. Instead of forming only early-type, spheroid-dominated galaxies (S0 and ellipticals), the standard cosmological model can successfully account for massive late-type, disk-dominated spiral galaxies (Sb-Sc).

79 ASTRONOMY AND ASTROPHYSICS↗

Soil moisture drives microbial controls on carbon decomposition in two subtropical forests

Knowledge of microbial mechanisms is critical to understand Earth's biogeochemical cycle under climate and environmental changes. However, large uncertainties remain in model simulations and predictions due to the lack of explicit parameterization of microbial data and few applications beyond the laboratory. In addition, most experimental and modeling studies of warming-induced changes in soil carbon (C) focus on temperature sensitivity, neglecting concomitant effects of changes in soil moisture. Soil microbes are sensitive to moisture, and their responses can dramatically impact soil biogeochemical cycles. Here we represent microbial and enzymatic functions in response to changes in moisture in the Microbial-ENzyme Decomposition (MEND) model. Through modeling with long-term field observations from subtropical forests, we demonstrate that parameterization with microbial data in addition to respiration fluxes greatly increases confidence in model simulations. We further employ the calibrated model to simulate the responses of soil organic C (SOC) under multiple environmental change scenarios. The model shows significant increases in SOC in response to decreasing soil moisture and only minor changes in SOC in response to increasing soil temperature. Increasing litter inputs also cause a significant increase in SOC in the pine forest, whereas an insignificant negative effect is simulated in the broadleaf forest. We also demonstrate the co-metabolism mechanism for the priming effects, i.e., more labile inputs to soil could stimulate microbial and enzymatic growth and activity. Furthermore our study provides strong evidence of microbial control over soil C decomposition and suggests the future trajectory of soil C may be more responsive to changes in soil moisture than temperature, particularly in tropical and subtropical environments.

54 ENVIRONMENTAL SCIENCES↗

Density pedestal prediction model for tokamak plasmas

Abstract A model for the pedestal density prediction based on neutral penetration combined with pedestal transport is presented. The model is tested against a pedestal database of JET-ILW Type I ELMy H-modes showing good agreement over a wide range of parameters both in standalone modelling (using the experimental temperature profile) and in full Europed modelling that predicts both density and temperature pedestals simultaneously. The model is further tested for ASDEX Upgrade and MAST-U Type I ELMy H-modes and both are found to agree with the same model parameters as for JET-ILW. The JET-ILW experiment where the isotope of the main ion is varied in a D/T scan at constant gas rate and constant β N is successfully modelled as long as the separatrix density ( n e,sep ) and pedestal transport coefficient ratio ( D / χ ) are varied in accordance with the experimentally observed variation of n e,sep and the isotope dependence of D / χ found in gyrokinetic simulations. The predictions are found to be sensitive to n e,sep which is why the model is combined with an n e,sep model to predict the pedestal for the STEP fusion reactor.

Physics↗

A rigorous process modeling methodology for biomass fast pyrolysis with an entrained-flow reactor

A biomass fast pyrolysis model was developed for implementation in equation-oriented modeling software. Based on a previous framework of coupled 1-dimensional mass, momentum, and heat balance equations, this model includes updated reaction kinetics to provide a more detailed representation of biomass components, intermediates, and products. A recently published derivation of thermodynamic properties for the species in this model has allowed the energy balance around the pyrolysis reactor to be rigorously redefined. With these improvements, the optimum pyrolysis temperature for bio-oil production predicted by the model is increased by up to 50°C, bringing it in line with experimental data and increasing the overall agreement. More importantly, the reactor energy balance is strictly enforced. The resulting model can be used for the design and optimization of biomass fast pyrolysis processes, and comparisons with other options for biomass utilization.

09 BIOMASS FUELS↗

Electronic doping of transition metal oxide perovskites

CaFeO{sub 3} is a prototypical negative charge transfer oxide that undergoes electronic metal-insulator transition concomitant with a dilation and contraction of nearly rigid octahedra. Altering the charge neutrality of the bulk system destroys the electronic transition, while the structure is significantly modified at high charge content. Using density functional theory simulations, we predict an alternative avenue to modulate the structure and the electronic transition in CaFeO{sub 3}. Charge distribution can be modulated using strain-rotation coupling and thin film engineering strategies, proposing themselves as a promising avenue for fine tuning electronic features in transition metal-oxide perovskites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Neural network emulation of flow in heavy-ion collisions at intermediate energies

Applications of new techniques in machine learning are speeding up progress in research in various fields. In this work, we construct and evaluate a deep neural network (DNN) to be used within a Bayesian statistical framework as a faster and more reliable alternative to the Gaussian process (GP) emulator of an isospin-dependent Boltzmann-Uehling-Uhlenbeck (IBUU) transport model simulator of heavy-ion reactions at intermediate beam energies. We found strong evidence of the DNN being able to emulate the IBUU simulator's prediction on the strengths of protons' directed and elliptical flow very efficiently even with small training datasets and with accuracy about ten times higher than the GP. Here, limitations of our present work and future improvements are also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗