Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

The Lifetimes of Nitriles (-C*N) and Acids (-COOH) during Ultraviolet Photolysis and Their Survival in Space

Nitriles are one of the most common classes of molecules observed in the gas phase in space, with over a dozen having been positively identified in interstellar and circumstellar environments through the detection of their rotational transitions. Acids, in contrast, are much less common. In this paper we present laboratory data comparing the stability of two structurally related acid-nitrile pairs to ultraviolet (UV) photolytic destruction: acetic acid vs. acetonitrile (CH3-COOH vs. CH3-CN) and glycine vs. aminoacetonitrile (H2N-CH2-COOH vs. H2N-CH2-CN). We find that the nitriles are destroyed ten and five times more slowly (respectively) by UV photolysis than are the corresponding acids. This suggests that whatever their relative formation rates, acids may be less abundant than nitriles in interstellar environments in part because they are more rapidly destroyed by photolysis. The results of this infrared (IR) spectral matrix isolation study indicate that during the lifetime of a typical interstellar cloud, even in its darkest regions, a population of acids in the gas phase will likely be diminished by at least half. Since aminoacetonitrile is a precursor to the amino acid glycine, and far more stable, presolar aminoacetonitrile may be a contributor to the deuterium enriched glycine detected in meteorites. It would clearly be informative to search for aminoacetonitrile (the nitrile corresponding to glycine) in the regions where the amino acid glycine has been reported.

Bernstein, Max P.↗
NASA NTRS1987

A preliminary study of factors affecting the calibration stability of the iridium versus iridium-40 percent rhodium thermocouple

An iridium versus iridium-40% rhodium thermocouple was studied. Problems associated with the use of this thermocouple for high temperature applications (up to 2000 C) were investigated. The metallurgical studies included X-ray, macroscopic, resistance, and metallographic studies. The thermocouples in the as-received condition from the manufacturer revealed large amounts of internal stress caused by cold working during manufacturing. The thermocouples also contained a large amount of inhomogeneities and segregations. No phase transformations were observed in the alloy up to 1100 C. It was found that annealing the thermocouple at 1800 C for two hours, and then at 1400 C for 2 to 3 hours yielded a fine grain structure, relieving some of the strains, and making the wire more ductile. It was also found that the above annealing procedure stabilized the thermal emf behavior of the thermocouple for application below 1800 C (an improvement from + or - 1% to + or - 0.02% within the range of the test parameters used).

Ahmed, Shaffiq↗
NASA NTRS2017

Aeroelastic Modeling of X-56A Stiff-Wing Configuration Flight Test Data

Aeroelastic stability and control derivatives for the X-56A Multi-Utility Technology Testbed (MUTT), in the stiff-wing configuration, were estimated from flight test data using the output-error method. Practical aspects of the analysis are discussed. The orthogonal phase-optimized multisine inputs provided excellent data information for aeroelastic modeling. Consistent parameter estimates were determined using output error in both the frequency and time domains. The frequency domain analysis converged faster and was less sensitive to starting values for the model parameters, which was useful for determining the aeroelastic model structure and obtaining starting values for the time domain analysis. Including a modal description of the structure from a finite element model reduced the complexity of the estimation problem and improved the modeling results. Effects of reducing the model order on the short period stability and control derivatives were investigated.

Grauer, Jared A.↗
NASA NTRS2001

Coupled Growth in Hypermonotectics

The overall objective of this project is to obtain a fundamental understanding of the physics controlling solidification processes in immiscible alloy systems. The investigation involves both experimentation and the development of a model describing solidification in monotectic systems. The experimental segment was designed to first demonstrate that it is possible to obtain interface stability and steady state coupled growth in hypermonotectic alloys through microgravity processing. Microgravity results obtained to date have verified this possibility. Future flights will permit experimental determination of the limits of interface stability and the influence of alloy composition and growth rate on microstructure. The objectives of the modeling segment of the investigation include prediction of the limits of interface stability, modeling of convective flow due to residual acceleration, and the influence of surface tension driven flows at the solidification interface. The study of solidification processes in immiscible alloy systems is hindered by the inherent convective flow that occurs on Earth and by the possibility of sedimentation of the higher density immiscible liquid phase. It has been shown that processing using a high thermal gradient and a low growth rate can lead to a stable macroscopically planar growth front even in hypermonotectic alloys. Processing under these growth conditions can avoid constitutional supercooling and prevent the formation of the minor immiscible liquid phase in advance of the solidification front. However, the solute depleted boundary layer that forms in advance of the solidification front is almost always less dense than the liquid away from the solidification front. As a result, convective instability is expected. Ground based testing has indicated that convection is a major problem in these alloy systems and leads to gross compositional variations along the sample and difficulties maintaining interface stability. Sustained low gravity processing conditions are necessary in order to minimize these problems and obtain solidification conditions which approach steady state.

Andrews, J. Barry↗
NASA NTRS1974

Ferromagnetic resonance studies of thermal effects on lunar metallic Fe phases

Ferromagnetic resonance results of annealing experiments are discussed which illustrate the thermal effects on lunar metallic iron phases already present in a lunar fines sample. Spectral features of ferromagnetic resonance produced in the sample by heat treatments at temperatures between 600 and 1025 C are described which resemble those detected in lunar breccias and crystalline rocks. A correlation is shown to exist between these features and the degree of thermal metamorphism. It is noted that this correlation can be used as a built-in geothermometer or probe to investigate the thermal history and degree of metamorphism of a lunar sample containing metallic iron phases. The thermal history of a metaclastic rock is analyzed in this way, and it is shown that thermal metamorphism is an effective process for increasing relaxation times or the stability of the natural remanent magnetization carried by single-domain metallic iron particles.

Tsay, F.-D.↗
NASA NTRS1978

Molten Salt Thermal Energy Storage Systems

The feasibility of storing thermal energy at temperatures of 450 C to 535 C in the form of latent heat of fusion was examined for over 30 inorganic salts and salt mixtures. Alkali carbonate mixtures were chosen as phase-change storage materials in this temperature range because of their relatively high storage capacity and thermal conductivity, moderate cost, low volumetric expansion upon melting, low corrosivity, and good chemical stability. Means of improving heat conduction through the solid salt were explored.

Maru, H. C.↗
NASA NTRS1978

Rubidium frequency standard test program for NAVSTAR GPS

Test data of the RFS Program in the Production phase and computer automation are presented, as an essential element in the evaluation of the RFS performance in a simulated spacecraft environment. Typical production test data will be discussed for stabilities from 1 to 100,000 seconds averaging time and simulated time error accumulation test. Also, design considerations in developing the RFS test systems for the acceptance test in production are discussed.

Koide, F.↗
NASA NTRS1980

Mineralogic and petrologic studies of lunar samples and meteorites

Experimental and thermodynamic research on the pressure temperature limits of the stability of the mineral assemblages found in pristine, spinel bearing lunar highland lithologies demonstrated the likelihood that the minerals originated in the lower stratigraphic levels of the primordial crust. The phase equilibrium in silicate solid/liquid systems of planetary importance were thermochemically interpreted in order to model the early formation of the crusts and maneles of Earth and Moon sized planets. The petrography and chemical composition of coarse grained gabbro, the chemical analysis and age dating of clasts from Apollo 16 breccia, the analysis of glass particles from Apollo 16 soil samples, the study of Allende and Mokoia meteorites as a source of information about events in the solar nebula, and the hydrothermal alteration of amorphous materials were also investigated. The capabilities of a model for addressing the problem of the origin of the Earth's moon by the disruptive capture mechanism are examined as well as models of the thermal evolution of hypothetical meteorite bodies. Progress in determining the composition of stony meteorite specimens collected at the Allan Hills site during the Antarctic field exploration is reported.

Wood, J. A.↗
NASA NTRS1983

Moderate temperature rechargeable sodium batteries

Cells utilizing the organic electrolyte, NaI in triglyme, operated at approx. 130 C with Na(+) - intercalating cathodes. However, their rate and stability were inadequate. NaAlCl4 was found to be a highly useful electrolyte for cell operation at 165-190 C. Na(+) intercalating chalcogenides reacted with NaAlCl4 during cycling to form stable phases. Thus, VS2 became essentially VS2Cl, with reversible capacity of approx 2.8 e(-)/V, and a mid-discharge voltage of approx 2.5V and 100 deep discharge cycles were readily achieved. A positive electrode consisting of VCl3 and S plus NaAlCl4 was subjected to deep-discharge cycles 300 times and it demonstrated identity with the in-situ-formed BSxCly cathode. NiS2 and NiS which are not Na(+)-intercalating structures formed highly reversible electrodes in NaAlCl4. The indicated discharge mechanism implies a theoretical capacity 4e(-)/Ni for NiS2 and 2e(-)/Ni for NiS. The mid-discharge potentials are, respectively, 2.4V and 2.1V. A Na/NiS2 cell cycling at a C/5 rate has exceeded 500 deep discharge cycles with 2.5e(-)/Ni average utilization. A 4 A-hr nominal capacity prototype Na/NiS2 cell was tested at 190 C. It was voluntarily terminated after 80 cycles. Further development, particularly of cathode structure and hardware should produce a battery capable of at least 50-W-hr/lb and more than 1000 cycles.

Abraham, K. M.↗
NASA NTRS1984

Morphological stability and fluid dynamics of vapor crystal growth

Research on morphological stability and fluid dynamics of crystal growth is discussed. Interfacial heat and mass transfer research is discussed. The finding of surface roughening is a precursor to a solid-solid phase transition was further quantified. Progress was obtained with the mass spectroscopic characterization of GeSe-Ge I sub 4.

Rosenberger, F. E.↗
NASA NTRS1990

Disintegration of liquid sheets

The development, stability, and disintegration of liquid sheets issuing from a two-dimensional air-assisted nozzle is studied. Detailed measurements of mean drop size and velocity are made using a phase Doppler particle analyzer. Without air flow the liquid sheet converges toward the axis as a result of surface tension forces. With airflow a quasi-two-dimensional expanding spray is formed. The air flow causes small variations in sheet thickness to develop into major disturbances with the result that disruption starts before the formation of the main break-up region. In the two-dimensional variable geometry air-blast atomizer, it is shown that the air flow is responsible for the formation of large, ordered, and small chaotic 'cell' structures.

Mansour, Adel↗
NASA NTRS1993

Multi-Angle Imaging SpectroRadiometer (MISR) Design Issues Influenced by Performance Requirements

The design of an Earth remote sensing sensor, such as the Multi-angle Imaging SpectroRadiometer (MISR), begins with a set of science requirements that determine a set of instrument specifications. It is required that the sensor meet these specifications across the image field, over a range of sensor operating temperatures, and throughout mission life. In addition, data quality must be maintained irrespective of bright objects, such as clouds, within the scene, or out-of-field glint sources. During the design phase of MISR, many refinements to the conceptual design have been made to insure that these performance criteria are met. These design considerations are the focus of this paper. Spectral stability with field angle, scene polarization insensitivity, and LTV exposure hardness have, for example, been enabled through a telecentric optical design, a gaussian shaped filter spectral profile used in conjunction with a Lyot depolarizer, and contamination prevention through consideration of material choices and handling procedures. Spectral, radiometric, and MTF stability of the instrument assures the scientific community that MISR imagery can be used for highly accurate aerosol, bi-directional reflectance distribution function (BRDF), and cloud studies.

Bruegge, Carol J.↗
NASA NTRS2014

Virtual Deformation Control of the X-56A Model with Simulated Fiber Optic Sensors

A robust control law design methodology is presented to stabilize the X-56A model and command its wing shape. The X-56A was purposely designed to experience flutter modes in its flight envelope. The methodology introduces three phases: the controller design phase, the modal filter design phase, and the reference signal design phase. A mu-optimal controller is designed and made robust to speed and parameter variations. A conversion technique is presented for generating sensor strain modes from sensor deformation mode shapes. The sensor modes are utilized for modal filtering and simulating fiber optic sensors for feedback to the controller. To generate appropriate virtual deformation reference signals, rigid-body corrections are introduced to the deformation mode shapes. After successful completion of the phases, virtual deformation control is demonstrated. The wing is deformed and it is shown that angle-ofattack changes occur which could potentially be used to an advantage. The X-56A program must demonstrate active flutter suppression. It is shown that the virtual deformation controller can achieve active flutter suppression on the X-56A simulation model.

Suh, Peter M.↗
NASA NTRS2013

Virtual Deformation Control of the X-56A Model with Simulated Fiber Optic Sensors

A robust control law design methodology is presented to stabilize the X-56A model and command its wing shape. The X-56A was purposely designed to experience flutter modes in its flight envelope. The methodology introduces three phases: the controller design phase, the modal filter design phase, and the reference signal design phase. A mu-optimal controller is designed and made robust to speed and parameter variations. A conversion technique is presented for generating sensor strain modes from sensor deformation mode shapes. The sensor modes are utilized for modal filtering and simulating fiber optic sensors for feedback to the controller. To generate appropriate virtual deformation reference signals, rigid-body corrections are introduced to the deformation mode shapes. After successful completion of the phases, virtual deformation control is demonstrated. The wing is deformed and it is shown that angle-of-attack changes occur which could potentially be used to an advantage. The X-56A program must demonstrate active flutter suppression. It is shown that the virtual deformation controller can achieve active flutter suppression on the X-56A simulation model.

Modal Filter↗
NASA NTRS2020

Aircraft System Identification from Multisine Inputs and Frequency Responses

The identification of aircraft flight dynamics is often performed using frequency responses, which are nonparametric models that quantify the steady-state magnitude and phase of a dynamic system response to sinusoidal inputs, as a function of frequency. Frequency responses are computed from measured input and output data, and then model parameters, such as stability and control derivatives, are estimated to best fit a parametric model to the empirical frequency response data. The utility of this approach is due to the familiarity of engineers with frequency responses, a number of theoretical and practical advantages under specific conditions, the availability of software packages, and many other reasons.

System identification↗
NASA NTRS2017

Oxidation of Alumina-Forming MAX Phases in Turbine Environments

Protective coatings for high temperature turbine components are based on YSZ thermal barriers and oxidation resistant, alumina-forming NiAl or NiCoCrAlY bond coats. Ti2AlC and Cr2AlC MAX phases are thus of special interest because of good oxidation resistance and CTE that can match Al2O3 and YSZ. Their alumina scales grow according to cubic kinetics due to grain growth in the scale, with initial heating dominated by fast TiO2 growth. Protective cubic kinetics are also found in high pressure burner rig tests of MAXthal 211 Ti2AlC, but with reduced rates due to volatile TiO(OH)2 formation in water vapor. YSZ-coatings on bulk Ti2AlC exhibit remarkable durability up to 1300C in furnace tests and at least a 25x life advantage compared to superalloys. At another extreme, Cr2AlC is resistant to low temperature Na2SO4 hot corrosion and exhibits thermal cycling stability bonded to a superalloy disk material. Accordingly, sputtered Cr2AlC coatings on disk specimens prevented hot corrosion detriments on LCF. Breakaway oxidation (Ti2AlC), scale spallation (Cr2AlC), interdiffusion, and processing as coatings still present serious challenges. However the basic properties of MAX phases provide some unusual opportunities for use in high temperature turbines.

ceramics↗
NASA NTRS1999

Electrohydrodynamic Stability of a Liquid Bridge: The "ALEX" Experiment

To provide insight into the roles of electrical forces, experiments on the stability of a liquid bridge were carried out during the 1996 Life And Microgravity Science Mission on the space shuttle Columbia. In terrestrial laboratories a Plateau configuration (where the bridge is surrounded by a matched density liquid) is necessary to avoid deformation due to buoyancy. This complicates the electrical boundary conditions, since charge is transported across the liquid-liquid interface. In the microgravity environment, a cylindrical bridge can be deployed in a gas which considerably simplifies the boundary condition. Nevertheless, to provide a tie-in to terrestrial experiments, two-phase experiments were carried out. The agreement with previous work was excellent. Then several experiments were conducted with a bridge deployed in a dielectric gas, SF6. In experiments with steady fields, it was found that the bridge was less stable than predicted by a linearized stability analysis using the Taylor-Melcher leaky dielectric model.

Burcham, C. L.↗