Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A reduced model for the ITER divertor based on SOLPS solutions for ITER Q = 10 baseline conditions: A. identifying options for the control parameters*

Edge codes such as SOLPS coupled to neutral codes such as EIRENE have become so comprehensive and sophisticated that they now constitute, in effect, 'code-experiments' that, as for actual experiments, can benefit from interpretation using simple models and conceptual frameworks, i.e. reduced models. The first task is the identification of options for the reduced model control parameters that are best suited for control of the action of the divertor, i.e. for control of target power loading and sputter-erosion, primarily. A strong correlation between the electron temperature at the divertor target, T e,t , and the neutral deuterium D 2 density at the target, n D2,t , flux-tube resolved, has recently been reported for a number of code studies including SOLPS-4.3 modeling of a set of ~50 ITER baseline cases: Q DT = 10, q 95 = 3, P SOL = 100 MW, metallic walls, and Ne seeding. This part A of the present study reports new results for largely the same ITER cases, confirming the strong correlations reported earlier between local values of T e,t , and (i) n D2,t , and (ii) normalized volumetric losses of power and pressure in the divertor. Strong correlations have now also been found, and are reported here for the first time, between T e,t and all of the divertor target quantities of practical interest. A physical explanation for this surprising result has not been fully identified; nevertheless it has encouraging implications for reduced modeling of the ITER divertor. For such ITER conditions, (i) the global Ne injection rate, Inj Ne [Ne/s], and (ii) the electron temperature at the location on the target where the peak power deposition occurs, T e,t @q ⊥,pk (eV), are found to be promising reduced model control parameters. In the companion report, part B, a reduced model for the ITER divertor is developed and described in detail, based on reversed-direction 2 point modelling, Rev2PM. The input to the reduced model is a value of the variable pair (T et @q ⟂,pk ,Inj Ne ) and the output are values of the various target as well as divertor-entrance quantities of practical interest, e.g. q ⊥,pk , n e,Xpt (the electron density at the poloidal location of the X-point), etc. In part B the reduced model is quantitatively characterized using one half of the code cases; it is then used to successfully predict (replicate) the code values of e.g. n e,Xpt for the other half of the cases.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Investigation of pedestal parameters and divertor heat fluxes in small ELM regimes in DIII-D

Abstract Divertor heat flux and its correlation with pedestal parameters within various small edge localized mode (ELM) regimes, including high beta poloidal, type-II and ELMs with negative triangularity H-modes were investigated in DIII-D. The parallel energy fluences of type-II and high beta poloidal small ELM regimes fall below the linear scaling with pedestal electron pressure for type-I ELMs put forward in Eich et al 2017 ( Nucl. Mater. Energy 12 84–90). The negative triangularity of H-mode ELMs follow the Eich scaling for type-I ELMs. The parallel heat flux and total heat loads to the divertor were determined using high-time resolution infrared thermography, while pedestal parameters were obtained through self-consistent kinetic equilibrium reconstructions. Linear regressions for the type-II and high beta poloidal regimes demonstrate that an equivalent 7.5 MA small ELM scenario in ITER would fall below the ~5 MJ m − 2 leading edge melting limit for tungsten (Gunn et al 2017 Nucl. Fusion 57 046025). Utilizing fast thermography, the scrape-off layer power fall-off length for both inter-ELM and intra-ELM was determined and compared to the Eich scaling with poloidal magnetic field in Eich et al (ASDEX Upgrade Team and JET EFDA Contributors 2013 Nucl. Fusion 53 093031). Except for the high beta poloidal scenario, all the small ELM regimes during both inter- and intra-ELM periods had power fall-off lengths ( λ q ) larger then would be expected from the B pol , MP − 1 scaling associated with type-I ELMs, signifying their potential in managing heat loads and offering a solution for core–edge integration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Experimental parameters for plasma wakefield acceleration in a narrow plasma column

Recent theoretical advancements propose multiple positron acceleration schemes in plasma wakefield acceleration (PWFA). One of the most promising ideas involves the creation of an electron-driven blowout wake within a finite-radius pre-ionized plasma column. This leads to the formation of an elongated region of sheath electrons at the closing of the first wake period capable of accelerating positrons while simultaneously providing a transverse focusing force. Additionally, the proposed scheme has shown to be a potential means of suppressing instabilities. We present an experimental opportunity to explore the narrow column PWFA at the Facility for Advanced Accelerator Experimental Tests II (FACET-II): the E333 experiment. As a pivotal first step towards achieving positron acceleration in PWFA, we have planned a precursor experiment utilizing the currently available single-bunch electron beam to study the physics of the narrow plasma PWFA scheme. We outline the feasible experimental parameters, including beam and ionization laser parameters, along with the required laser optics for the experiment. The primary observable signatures for this stage of the experiment are the final energy spectrum and transverse position of the electron bunch, anticipating reduced energy loss and enhanced beam guidance in the narrow plasma column compared to the nominal PWFA. Comprehensive simulations are used to detail our experimental plan.

Lee, Valentina [University of Colorado, Boulder, C↗
DOE OSTI2024

Grover-QAOA for 3-SAT: quadratic speedup, fair-sampling, and parameter clustering

Abstract The SAT problem is a prototypical NP-complete problem of fundamental importance in computational complexity theory with many applications in science and engineering; as such, it has long served as an essential benchmark for classical and quantum algorithms. This study shows numerical evidence for a quadratic speedup of the Grover Quantum Approximate Optimization Algorithm (G-QAOA) over random sampling for finding all solutions to 3-SAT (All-SAT) and Max-SAT problems. G-QAOA is less resource-intensive and more adaptable for these problems than Grover’s algorithm, and it surpasses conventional QAOA in its ability to sample all solutions. We show these benefits by classical simulations of many-round G-QAOA on thousands of random 3-SAT instances. We also observe G-QAOA advantages on the IonQ Aria quantum computer for small instances, finding that current hardware suffices to determine and sample all solutions. Interestingly, a single-angle-pair constraint that uses the same pair of angles at each G-QAOA round greatly reduces the classical computational overhead of optimizing the G-QAOA angles while preserving its quadratic speedup. We also find parameter clustering of the angles. The single-angle-pair protocol and parameter clustering significantly reduce obstacles to classical optimization of the G-QAOA angles.

Zhang, Zewen (ORCID:000000032258613X)↗
DOE OSTI2020

Plot-level rapid screening for photosynthetic parameters using proximal hyperspectral imaging

Abstract Photosynthesis is currently measured using time-laborious and/or destructive methods which slows research and breeding efforts to identify crop germplasm with higher photosynthetic capacities. We present a plot-level screening tool for quantification of photosynthetic parameters and pigment contents that utilizes hyperspectral reflectance from sunlit leaf pixels collected from a plot (~2 m×2 m) in <1 min. Using field-grown Nicotiana tabacum with genetically altered photosynthetic pathways over two growing seasons (2017 and 2018), we built predictive models for eight photosynthetic parameters and pigment traits. Using partial least squares regression (PLSR) analysis of plot-level sunlit vegetative reflectance pixels from a single visible near infra-red (VNIR) (400–900 nm) hyperspectral camera, we predict maximum carboxylation rate of Rubisco (Vc,max, R2=0.79) maximum electron transport rate in given conditions (J1800, R2=0.59), maximal light-saturated photosynthesis (Pmax, R2=0.54), chlorophyll content (R2=0.87), the Chl a/b ratio (R2=0.63), carbon content (R2=0.47), and nitrogen content (R2=0.49). Model predictions did not improve when using two cameras spanning 400–1800 nm, suggesting a robust, widely applicable and more ‘cost-effective’ pipeline requiring only a single VNIR camera. The analysis pipeline and methods can be used in any cropping system with modified species-specific PLSR analysis to offer a high-throughput field phenotyping screening for germplasm with improved photosynthetic performance in field trials.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Model BOSS and eBOSS luminous red galaxies at 0.2< z<1.0 using SubHalo Abundance Matching with three parameters

SubHalo Abundance Matching (SHAM) is an empirical method for constructing galaxy catalogues based on high-resolution N-body simulations. Here, we apply SHAM on the UNIT simulation to simulate SDSS BOSS/eBOSS luminous red galaxies (LRGs) within a wide redshift range of 0.2 < $z$ < 1.0. Besides the typical SHAM scatter parameter σ, we include $v$ smear and V ceil to take into account the redshift uncertainty and the galaxy incompleteness, respectively. These two additional parameters are critical for reproducing the observed 2PCF multipoles on 5–25$\, h^{-1}\, {\rm Mpc}$. The redshift uncertainties obtained from the best-fitting $v$ smear agree with those measured from repeat observations for all SDSS LRGs except for the LOWZ sample. We explore several potential systematics but none of them can explain the discrepancy found in LOWZ. Our explanation is that the LOWZ galaxies might contain another type of galaxies that needs to be treated differently. The evolution of the measured σ and Vceil also reveals that the incompleteness of eBOSS galaxies decreases with the redshift. This is the consequence of the magnitude lower limit applied in eBOSS LRG target selection. Our SHAM also set upper limits for the intrinsic scatter of the galaxy–halo relation, given a complete galaxy sample: σ int < 0.31 for LOWZ at 0.2 < $z$ < 0.33, σ int < 0.36 for LOWZ at 0.33 < $z$ < 0.43, and σ int < 0.46 for CMASS at 0.43 < $z$ < 0.51. The projected 2PCFs of our SHAM galaxies also agree with the observational ones on the 2PCF fitting range.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Model-independent measurement of 𝐷 0 −$\overline{D}$ 0 mixing parameters in 𝐷 0 → 𝐾$^{0}_{𝑆}$⁢𝜋 + ⁢𝜋 − decays at Belle and Belle II

We perform a model-independent measurement of the 𝐷 0 −$\overline{D}$ 0 mixing parameters using samples of 𝑒 + ⁢𝑒 − -collision data collected by the Belle and Belle II experiments that have integrated luminosities of 951 fb −1 and 408 fb −1 , respectively. Approximately 2.05 × 10 6 neutral 𝐷 mesons are reconstructed in the 𝐷 0 → 𝐾$^{0}_{S}$⁢𝜋 + ⁢𝜋 − channel, with the neutral 𝐷 flavor tagged by the charge of the pion in the 𝐷* + → 𝐷 0⁢ 𝜋 + decay. Assuming charge-parity symmetry, the mixing parameters are measured to be 𝑥 = (4.0 ±1.7 ±0.4) × 10 −3 and 𝑦 = (2.9 ±1.4 ±0.3) × 10 −3 , where the first uncertainties are statistical and the second systematic. The results are consistent with previous determinations.

Charmed mesons↗
DOE OSTI2026

Evidence for $CP$ violation and measurement of $CP$-violating parameters in B$^0_\mathrm{s}$ $\to$ J/$\psi\,\phi$(1020) decays in pp collisions at $\sqrt{s} =$ 13 TeV

A pioneering machine-learning-based flavor-tagging algorithm combining same-side and opposite-side tagging is used to obtain the equivalent of 27$\,$000 tagged B$^0_\mathrm{s}$$\to$ J/$\psi\, \phi$(1020) decays from pp collisions at $\sqrt{s} =$ 13 TeV, collected by the CMS experiment and corresponding to an integrated luminosity of 96.5 fb$^{-1}$. A time- and flavor-dependent angular analysis of the $\mu^+\mu^-$K$^+$K$^-$ final state is used to measure parameters of the $\mathrm{B}^0_\mathrm{s}$-$\overline{\mathrm{B}}^0_\mathrm{s}$ system. The weak phase is measured to be $\phi_\mathrm{s}$ = $-$73 $\pm$ 23 (stat) $\pm$ 7 (syst) mrad, which, combined with a $\sqrt{s}$ = 8 TeV CMS result, gives $\phi_\mathrm{s}$ = $-$74 $\pm$ 23 mrad. This value differs from zero by 3.2 standard deviations, providing evidence for $CP$ violation in B$^0_\mathrm{s}$$\to$ J/$\psi\,\phi$(1020) decays. All measured physics parameters are found to agree with standard model predictions where available.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Parameter extraction for a SPICE model of an hTron superconducting thermal switch

Efficiently simulating large circuits is crucial to the development of superconducting nanowire-based electronics. However, current simulation tools for this technology are not adapted to the scaling of circuit size and complexity. We focus on the multilayered heater-nanocryotron (hTron), a promising superconducting nanowire-based switch used in applications such as superconducting nanowire single-photon detector readout. Previously, the hTron was modeled using traditional finite-element methods, which fall short in simulating systems at a larger scale. An empirical-based method would be better adapted to this task, enhancing both simulation speed and agreement with experimental data. In this work, we perform switching current and activation delay measurements on 17 hTron devices. We then develop a method for extracting physical fitting parameters used to characterize the devices. We build a SPICE behavioral model that reproduces the static and transient device behavior using these parameters, and validate it by comparing its performance to a model developed in prior work, showing an improvement in simulation time by several orders of magnitude. Furthermore, our model provides circuit designers with a tool to help understand the hTron’s behavior during all design stages, thus enabling broader use of the hTron across various new areas of application.

Caloritronics↗
DOE OSTI2026

Primordial black hole dark matter: A quantitative parameter sensitivity comparison across formation mechanisms and particle candidates

Primordial black holes (PBHs) in the asteroid-mass window ( 10 17 – 10 22 g ) can account for all of the dark matter without violating any observational constraint, yet are routinely dismissed as fine-tuned. I put that dismissal to the test by applying three complementary sensitivity measures uniformly across a broad landscape: three noninflationary PBH production mechanisms, six classes of inflationary PBH models, and seven particle dark matter benchmarks, all evaluated against the same observable target. Three distinct naturalness universality classes emerge, determined entirely by the analytic structure of the abundance map rather than by the nature of the dark matter candidate. Biased-domain-wall PBHs, in their least model-dependent (free- V b ) form, have the same low sensitivity, Δ = 4.5 , as off-resonance weakly interacting massive particles and freeze-in particles ( Δ = 2 ), a sensitivity that, because it is constant over the entire parameter space of the construction, also coincides trivially with its own Wilson-normalized average within that parameter space (Section Definition and conventions), an equivalence that concerns only the space over which Δ is computed and is not a naturalness statement about the construction as a whole; a further reduction to Δ = 2 is possible only under the additional, independently motivated but not required, assumption that the domain-wall bias is generated by Planck-suppressed operators; early matter-domination PBHs occupy an intermediate tier alongside coannihilating weakly interacting massive particles (WIMPs), unified by a structural identity in which the sensitivity measure equals the logarithm of the ratio of the formation scale to the matter–radiation equality scale; first-order phase transition PBHs, once the more accurate super-exponential collapse probability is used in place of the single-exponential approximation, instead belong to the same highly sensitive tier as resonant WIMP annihilation and single-field inflationary collapse, for a structurally distinct reason; single-field ultraslow-roll inflationary collapse is severely tuned for a distinct reason: a double exponential in which the power spectrum amplitude is itself exponentially sensitive to the inflaton potential coefficients, on top of the exponential collapse sensitivity of the abundance map. My main conclusion is that the claim that PBH dark matter is generically fine-tuned conflates the worst case with a landscape spanning every naturalness tier. The Barbieri-Giudice sensitivity computed here and the Wilson-normalized measure of Iovino and Riotto answer distinct and mutually consistent questions about the same construction, a distinction I clarify within the two-layer decomposition.

Profumo, Stefano [University of California, Santa ↗
DOE OSTI2021

Determining the jet transport coefficient $\hat{q}$ from inclusive hadron suppression measurements using Bayesian parameter estimation

We report a new determination of $\hat{q}$, the jet transport coefficient of the quark-gluon plasma. We use the JETSCAPE framework, which incorporates a novel multistage theoretical approach to in-medium jet evolution and Bayesian inference for parameter extraction. The calculations, based on the Matter and Lbt jet quenching models, are compared to experimental measurements of inclusive hadron suppression in Au + Au collisions at the BNL Relativistic Heavy Ion Collider (RHIC) and Pb + Pb collisions at the CERN Large Hadron Collider (LHC). The correlation of experimental systematic uncertainties is accounted for in the parameter extraction. The functional dependence of $\hat{q}$ on jet energy or virtuality and medium temperature is based on a perturbative picture of in-medium scattering, with components reflecting the different regimes of applicability of Matter and Lbt. In the multistage approach, the switch between Matter and Lbt is governed by a virtuality scale Q 0 . Comparison of the posterior model predictions to the RHIC and LHC hadron suppression data shows reasonable agreement, with moderate tension in limited regions of phase space. The distribution of $\hat{q}/T^3$ extracted from the posterior distributions exhibits weak dependence on jet momentum and medium temperature T, with 90% credible region (CR) depending on the specific choice of model configuration. The choice of Matter + Lbt, with switching at virtuality Q 0 , has 90% CR of $2<\hat{q}/T^3<4$ for p T jet > 40 GeV=c. The value of Q 0 , determined here for the first time, is in the range 2.0-2.7 GeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Majorana parameters of the interacting boson model of nuclear structure and their implication for 0 ν β β decay

Here, the well-known spherical-deformed-transitional nucleus and potential 0$\textit{νββ}$ emitter 150 Nd and its daughter 150 Sm were investigated in nuclear resonance fluorescence experiments using quasimonoenergetic, linearly polarized γ-ray beams. For both nuclei transitions from the 1 + scissors mode to the $0^+_2$ and $2^+_2$ states were observed for the first time and their respective $\textit{M}$ 1 transition strengths were determined. Through a systematic investigation, a sensitivity of these transition strengths to the three Majorana parameters of the interacting boson model-2 (IBM-2) was established. In combination with the novel experimental data, this poses strong constraints to the Majorana parameters in improved IBM-2 representations of both nuclei. A subsequent recalculation of the nuclear matrix elements (NMEs) for the 150 Nd → 150 Sm 0$\textit{νββ}$ decay in the IBM-2 with these improved representations results in $M^{(0νββ)}_{\text{IBM-2}}[0^+_1]$ = 3.35 for the NME for 0$\textit{νββ}$ decay into the ground state of 150 Sm and $M^{(0νββ)}_{\text{IBM-2}}[0^+_2]$ = 1.30 for 0$\textit{νββ}$ decay to its $0^+_2$ state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Slope parameter of the symmetry energy and the structure of three-particle interactions in nuclear matter

In the first part of this paper, we present a study of the symmetry energy (a s ) and its slope parameter (L) for nuclear matter in the framework of the Fermi liquid theory of Landau and Migdal. We derive an exact relation between a s and L, which involves the nucleon effective masses and three-particle Landau-Migdal parameters. We present simple estimates which suggest that there are two main mechanisms to explain the empirical values of L: The proton-neutron effective mass difference in isospin asymmetric matter and the ℓ = 0 moment of the isovector in-medium three-particle scattering amplitude. In the second part of this paper, we discuss the general structure of three-particle interactions in nuclear matter in the framework of the Fermi liquid theory. The connections to the Bethe-Brueckner-Goldstone theory and other approaches are also discussed. Finally, we show explicitly how the first few terms in the Faddeev series, together with medium induced three-particle interactions, emerge naturally in the Fermi liquid theory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Bayesian reconstruction of anisotropic flow fluctuations at fixed impact parameter

The cumulants of the distribution of anisotropic flow are measured accurately in Pb+Pb collisions at the LHC as a function of centrality classifiers (charged multiplicity and/or transverse energy). Using Bayesian inference, we reconstruct from these measurements the probability distribution of anisotropic flow in the ``theorists' frame'' where the impact parameter has a fixed magnitude and orientation, up to ∼70% centrality. The variation of flow fluctuations with impact parameter displays direct evidence of viscous damping, which is larger for higher Fourier harmonics, in line with expectations from hydrodynamics. We use intensive measures of non-Gaussian flow fluctuations, which have reduced dependence on centrality. Here, we infer from ATLAS data the magnitude of these intensive non-Gaussianities in each Fourier harmonic. They provide data-driven estimates of response coefficients to initial anisotropies, without resorting to any specific microscopic model of initial conditions. These estimates agree with viscous hydrodynamic calculations.

Bayesian methods↗
DOE OSTI2020

Efficient neutrino oscillation parameter inference using Gaussian processes

The unified approach of Feldman and Cousins allows for exact statistical inference of small signals that commonly arise in high energy physics. It has gained widespread use, for instance, in measurements of neutrino oscillation parameters in long-baseline experiments. However, the approach relies on the Neyman construction of the classical confidence interval and is computationally intensive as it is typically done in a grid-based fashion over the entire parameter space. In this article, we propose an efficient algorithm for the Feldman-Cousins approach using Gaussian processes to construct confidence intervals iteratively. Further, we show that in the neutrino oscillation context, one can obtain confidence intervals fives times faster in one dimension and ten times faster in two dimensions, while maintaining an accuracy above 99.5%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Measurements of branching fractions of Λ$^{+}_{c}$ → Σ + ⁢η and Λ$^{+}_{c}$ → Σ + ⁢η' and asymmetry parameters of Λ$^{+}_{c}$ → Σ + ⁢π 0 , Λ$^{+}_{c}$ → Σ + ⁢η, and Λ$^{+}_{c}$ → Σ + ⁢η'

We report a study of Λ c + → Σ + π 0 , Λ c + → Σ + η , and Λ c + → Σ + η ' using the data sample corresponding to an integrated luminosity of 980 fb - 1 collected with the Belle detector at the KEKB asymmetric-energy e + e - collider. The branching fractions relative to Λ c + → Σ + π 0 are measured as B Λ c + → Σ + η / B Λ c + → Σ + π 0 = 0.25 ± 0.03 ± 0.01 and B Λ c + → Σ + η ' / B Λ c + → Σ + π 0 = 0.33 ± 0.06 ± 0.02 . Using B Λ c + → Σ + π 0 = ( 1.25 ± 0.10 ) % , we obtain B Λ c + → Σ + η = ( 3.14 ± 0.35 ± 0.17 ± 0.25 ) × 10 - 3 and B Λ c + → Σ + η ' = ( 4.16 ± 0.75 ± 0.25 ± 0.33 ) × 10 - 3 . Here the uncertainties are statistical, systematic, and from B Λ c + → Σ + π 0 , respectively. The ratio of the branching fraction of Λ c + → Σ + η ' with respect to that of Λ c + → Σ + η is measured to be B Λ c + → Σ + η ' / B Λ c + → Σ + η = 1.34 ± 0.28 ± 0.08 . We update the asymmetry parameter of Λ c + → Σ + π 0 , α Σ + π 0 = - 0.48 ± 0.02 ± 0.02 , with a considerably improved precision. The asymmetry parameters of Λ c + → Σ + η and Λ c + → Σ + η ' are measured to be α Σ + η = - 0.99 ± 0.03 ± 0.05 and α Σ + η ' = - 0.46 ± 0.06 ± 0.03 for the first time.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Exploring solar neutrino oscillation parameters with the liquid scintillator counter at Yemilab with a comparison to JUNO

We investigate the sensitivities of the liquid scintillator counter (LSC) at Yemilab and JUNO to solar neutrino oscillation parameters, focusing on θ 12 and Δ m 21 2 . We compare the potential of JUNO with LSC at Yemilab utilizing both reactor and solar data in determining those parameters. We find that the solar neutrino data of LSC at Yemilab is highly sensitive to θ 12 enabling its determination with a higher precision compared to reactor experiments. Our study also reveals that if Δ m 21 2 is larger, with a value close to the best-fit value of KamLAND, JUNO reactor data will have about two times better precision than the reactor LSC at Yemilab. On the other hand, if Δ m 21 2 is smaller and closer to the best-fit value of solar neutrino experiments, the precision of the reactor LSC at Yemilab will be better than JUNO. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Energy-scaling behavior of intrinsic transverse-momentum parameters in Drell-Yan simulation

An analysis is presented based on models of the intrinsic transverse momentum (intrinsic 𝑘 T ) of partons in nucleons by studying the dilepton transverse momentum in Drell-Yan events. Using parameter tuning in event generators and existing data from fixed-target experiments and from hadron colliders, our investigation spans 3 orders of magnitude in center-of-mass energy and 2 orders of magnitude in dilepton invariant mass. The results show an energy-scaling behavior of the intrinsic 𝑘 T parameters, independent of the dilepton invariant mass at a given center-of-mass energy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗