Parallel battery test results
The effects of disabling and enabling the charger on one of two batteries that are operating in a parallel mode are discussed.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The effects of disabling and enabling the charger on one of two batteries that are operating in a parallel mode are discussed.
The paper describes the fabrication and operation of an optical parallel logic (OPAL) device which performs Boolean algebraic operations on binary images. Several logic operations on two input binary images were demonstrated using an 8 x 8 device with a CdS photoconductor and a twisted nematic liquid crystal. Two such OPAL devices can be interconnected to form a half-adder circuit which is one of the essential components of a CPU in a digital signal processor.
A design for a separate compilation facility for the SIMULA 67 programming language is presented. The paper explores the problems with existing separate compilation schemes, and proposes a new scheme that allows top-down, bottom-up, or even parallel development and integration of program modules. An evaluation of the proposal and a discussion of its applicability to other languages are then given.
Microprocessor and arithmetic support chip technology was applied to the design of a reconfigurable emulator for real time flight simulation. The system developed consists of master control system to perform all man machine interactions and to configure the hardware to emulate a given aircraft, and numerous slave compute modules (SCM) which comprise the parallel computational units. It is shown that all parts of the state equations can be worked on simultaneously but that the algebraic equations cannot (unless they are slowly varying). Attempts to obtain algorithms that will allow parellel updates are reported. The word length and step size to be used in the SCM's is determined and the architecture of the hardware and software is described.
The summary of a complete analytical design evaluation of an existing parallel flow compressor is presented and a field vibration problem that manifested itself as a subsynchronous vibration that tracked at approximately 2/3 of compressor speed is reviewed. The comparison of predicted and observed peak response speeds, frequency spectrum content, and the performance of the bearing-seal systems are presented as the events of the field problem are reviewed. Conclusions and recommendations are made as to the degree of accuracy of the analytical techniques used to evaluate the compressor design.
A combination of numerical and analytical techniques has been used to investigate the dynamics and stability of optically thin plane-parallel radiatively driven slabs of gas confined by the thermal gas pressure of a high-temperature low-density medium. Scaling laws allow the individual model 'clouds' to be characterized by a single free parameter, chi, a normalized column density which measures the strength of the acceleration due to radiation pressure relative to that due to thermal gas pressure. It is found that these clouds are stable and coherently accelerated only when chi is small. In this regime a simple slab model is constructed which accurately reproduces the more complex gasdynamic results. The low-chi clouds are marginally able to reach the high velocities seen in the atmospheres of quasi-stellar objects, but only if their motion is subsonic with respect to the external confining medium. This implies either that the medium is extremely hot and tenuous or that it is moving outward with the clouds.
A long-term experimental development program conducted at Goddard Space Flight Center to implement an ultrahigh-speed data processing system known as the Massively Parallel Processor (MPP) is described. The MPP is a single instruction multiple data stream computer designed to perform logical, integer, and floating point arithmetic operations on variable word length data. Information is presented on system architecture, the system configuration, the array unit architecture, individual processing units, and expected operating rates for several image processing applications (including the processing of Landsat data).
Electron beam experiments using rocket-borne instrumentation will be discussed. The observations indicate that reflections of energetic electrons may occur at possible electric field configurations parallel to the direction of the magnetic lines of force in an altitude range of several thousand kilometers above the ionosphere.
Electron and ion energy spectra and electron pitch angle distributions are presented for two sounding rocket flights in the dayside auroral zone. At times, effects of dc electric fields parallel to the magnetic field are evident in that: (1) within precipitation features, protons are decelerated by an amount of energy consistent with that which electrons gain and (2) electrons are sometimes aligned to within 3 deg (full width at half maximum) of the magnetic field. A maximum altitude for the accelerating region of several thousand kilometers is deduced from the narrow width of the pitch angle distribution and also from time-of-flight delays between the observation of accelerated electrons and decelerated protons.
The massively parallel processor (MPP) system is designed to process satellite imagery at high rates. A large number (16,384) of processing elements (PE's) are configured in a square array. For optimum performance on operands of arbitrary length, processing is performed in a bit-serial manner. On 8-bit integer data, addition can occur at 6553 million operations per second (MOPS) and multiplication at 1861 MOPS. On 32-bit floating-point data, addition can occur at 430 MOPS and multiplication at 216 MOPS.
In a paralleled inverter system, a positive feedback current derived from the total current from all of the modules of the inverter system is applied to the base drive of each of the power transistors of all modules, thereby to provide all modules protection against open or short circuit faults occurring in any of the modules, and force equal current sharing among the modules during turn on of the power transistors.
Parallel electric fields can exist in the magnetic mirror geometry of auroral field lines if they conform to the quasineutral equilibrium solutions. Results on quasi-neutral equilibria and on double layer discontinuities were reviewed and the effects on such equilibria due to non-unique solutions, potential barriers and field aligned current flows using as inputs monoenergetic isotropic distribution functions were examined.
A preliminary simulator design that uses a parallel computer organization to provide accuracy, portability, and low cost is presented. The hardware and software for this prototype simulator are discussed. A detailed discussion of the inter-computer data transfer mechanism is also presented.
A novel interconnection of distributed parameter system (DPS) identification and adaptive filtering is presented, which culminates in a common statement of coupled autoregressive, moving-average expansion or parallel infinite impulse response configuration adaptive parameterization. The common restricted complexity filter objectives are seen as similar to the reduced-order requirements of the DPS expansion description. The interconnection presents the possibility of an exchange of problem formulations and solution approaches not yet easily addressed in the common finite dimensional lumped-parameter system context. It is concluded that the shared problems raised are nevertheless many and difficult.
The non-LTE radiative transfer problem for a two level atom with complete redistribution over a Doppler profile is solved for a plane parallel slab (overlying a radiating photosphere) that has a velocity field which rises symmetrically from zero at either face to a central maximum. Since the velocity gradient reverses, distant layers of the slab become coupled by radiation that jumps intervening layers. The Feautrier method is used, but an iterative variant is also employed as a check in cases where poorly conditioned matrices are encountered. Approximations are developed to explain some of the principal features. It is found that the source function S tends to have two plateaus with values near 2/3 I sub 0 and 1/3 I sub 0, where I sub 0 is the photospheric continuum incident from below; the larger value lies nearer the photosphere. The upper layers sometimes exhibit a rise in S owing to interconnection by radiation to the base. It is noted that the radiation force is largest at the two faces and the midplane. Some line profiles are found to have unusually steep absorptions at rest frequency because of the low excitation in the uppermost, stationary layers.
Data from various experiments of the Atmosphere Explorer satellites are analyzed to test their consistency with the model of single-particle linear acceleration through a static parallel potential drop. Theoretical current/voltage and energy flux/voltage relations are applied to the data to predict the densities of source current carriers above the acceleration region for upward Birkeland currents. Comparison of these model predictions with simultaneous electron data indicates that the observed field-aligned potential drops are consistent with direct acceleration in the absence of anomalous resistivity.
Current applications of real-time simulations to the development of complex aircraft propulsion system controls have demonstrated the need for accurate, portable, and low-cost simulators. This paper presents a preliminary simulator design that uses a parallel computer organization to provide these features. The hardware and software for this prototype simulator are discussed. A detailed discussion of the inter-computer data transfer mechanism is also presented.
The applicability of parallel processing schemes to the implementation of a contextual classification algorithm which exploits the spatial and spectral context of a multispectral remote sensing pixel to achieve classification is examined. Two algorithms for classifying each multivariate pixel taking into account the probable classifications of neighboring pixels are presented which make use of a size three horizontally linear neighborhood, and the serial computational complexity of the more efficient algorithm is shown to grow in proportion to the number of pixels and the cube of the number of possible categories. The implementation of the more efficient algorithm on a CDC Flexible Processor system and on a multimicroprocessor system such as the proposed PASM is then discussed. It is noted that the use of N processors to perform the calculations N times faster than a single processor overcomes the principal disadvantage of contexual classifiers, i.e., their computational complexity.