Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Hydrogen effects in 001-line oriented nickel-base superalloy single crystals

The entry and subsequent interaction of hydrogen on the mechanical properties of the single crystal nickel-base superalloy CMSX-2 has been studied. Significant amounts of hydrogen were introduced by high temperature hydrogen charging in molten salts which led to an increased lattice parameter and microhardness and to a degradation in tensile elongation to failure whose extent scales with the depth of the hydrogenated zone. In this region a fracture mode change from a 111 to a 100 plane type also occurred. The values of the binding energy of hydrogen to solidification voids and the effective hydrogen pressure in the voids were estimated.

Baker, C. L.↗

Asteroid 45 Eugenia - Lightcurves and the pole orientation

Three lightcurves obtained in 1969 and six from 1984 are presented for the 250-km U-type asteroid Eugenia. The asteroid's north pole is within + or - 10 deg of ecliptic longitude 106 deg and a latitude of +26 deg, in keeping with an amplitude-aspect pole analysis. While only one maximum and one minimum are present when observations are closest to both the north and south poles, there are two of each at other oppositions. It is suggested that this effect may be due to the surface albedo features of Eugenia.

Taylor, R. C.↗

A mathematical model for spatial orientation from pictorial perspective displays

A previously formulated mathematical model, describing how observers reconstruct three-dimensional spatial layouts from perspective projections, has been extended to more complex situations. The model assumes that the observer has a priori knowledge of certain characteristics of the viewed objects, like size, shape, or parallelism or perpendicularity of lines or planes. These assumptions are used in a three-dimensional process to reconstruct a spatial layout that `best matches' the perceived lines of sight to the object coordinates. Sources of errors and biases in this process are specified and their effects on model outputs are discussed. An experiment, in which eight subjects judged the relative direction of one object with respect to another, has been conducted to validate the model. The model has been found to generally reproduce the systematic trends of the experimental results and also has provided an analytical explanation for them. The mathematical model is expected to be a useful tool in analyzing and developing pictorial perspective flight displays.

Grunwald, Arthur J.↗

Asteroid shapes and pole orientations from visual and infrared photometry

The aim was to obtain visual and infrared lightcurves of Pluto-Charon mutual eclipse event lightcurves and to analyze them to derive models of the Pluto-Charon system, including separations, relative sizes, some orbital parameters, system density, and an albedo map of the hemisphere of Pluto facing Charon. Researchers obtained observations of Pluto-Charon mutual events with the Palomar 1.5 and 5-meter, Kitt Peak 1.3-meter, and NASA Infrared Telescope Facility (IRTF) 3-meter telescope. IRAS survey observations of Pluto were combined with the results of eclipse models to show that the thermal flux observed by IRAS cannot be explained using the standard thermal model for atmospherless solar system bodies but can be explained if Pluto behaves as an isothermal body, e.g., as would be the case if it had a thermally significant atmosphere (Tedesco et al., 1987). A water frost spectrum of Charon was obtained (Buie et al., 1987) and IR lightcurves of two asteroids were used to demonstrate that their visual lightcurves were due primarily to their irregular shapes (Lebofsky et al., 1988.

Tedesco, Edward F.↗

Requirements for an EOS-oriented workstation

The determination of functional and performance requirements of a workstation specifically directed toward scientific users of the proposed NASA Earth Observing System information system is discussed. Image processing, user interface; data product visualization; and text processing are considered.

Kober, W.↗

Composite sizing and ply orientation for stiffness requirements using a large finite element structural model

A NASTRAN bulk dataset preprocessor was developed to facilitate the integration of filamentary composite laminate properties into composite structural resizing for stiffness requirements. The NASCOMP system generates delta stiffness and delta mass matrices for input to the flutter derivative program. The flutter baseline analysis, derivative calculations, and stiffness and mass matrix updates are controlled by engineer defined processes under an operating system called CBUS. A multi-layered design variable grid system permits high fidelity resizing without excessive computer cost. The NASCOMP system uses ply layup drawings for basic input. The aeroelastic resizing for stiffness capability was used during an actual design exercise.

Radovcich, N. A.↗

Task oriented nonlinear control laws for telerobotic assembly operations

The goal of this research is to achieve very intelligent telerobotic controllers which are capable of receiving high-level commands from the human operator and implementing them in an adaptive manner in the object/task/manipulator workspace. Initiatives by the authors at Integrated Systems, Inc. to identify and develop the key technologies necessary to create such a flexible, highly programmable, telerobotic controller are presented. The focus of the discussion is on the modeling of insertion tasks in three dimensions and nonlinear implicit force feedback control laws which incorporate tool/workspace constraints. Preliminary experiments with dual arm beam assembly in 2-D are presented.

Walker, R. A.↗

The theory of the earth's orientation, with some new results for nutation

The rotation of the earth is variable at a number of time scales, from a few days to thousands of years and longer. Variations occur in the rotation rate, in the geographical position of the rotation axis (referred to as polar motion), and in the position of the axis relative to inertial space (referred to as nutation and precession). The interpretations of the various observations have implications for the dynamical behavior and structure of the earth's deep interior, and for various aspects of meteorology and oceanography. These are reviewed below. A model of the diurnal resonance in nutation for a nonhydrostatically pre-stressed earth is also presented.

Wahr, John M.↗

Highly oriented Tl2Ba2Ca2Cu3O10 thin films by pulsed laser evaporation

Superconducting thin films on MgO (100) substrates with nearly pure Tl2Ba2Ca2Cu3O10 (2:2:2:3) phase using pulsed laser evaporation and postannealing have been fabricated. The films had c axes perpendicular to the substrates. Superconducting films with onset temperatures of 125 K and zero resistance at 110 K were obtained. X-ray microprobe fluorescence measurements indicate that a typical composition of films is Tl(0.66)Ba(1.77)Ca(1.46)Cu3O(x) which is low in Tl compared to that expected for the 2:2:2:3 phase. A typical grain size is greater than 10 microns revealed by scanning electron microscopy.

Liou, S. H.↗

Combined roles of buoyancy and orientation in nucleate pool boiling

The paper presents results obtained during pool boiling from flat surfaces over body force levels of a/g = -1 to 0 to 20 for LN2 and R-113 under steady and transient conditions. Pyrex and metal surfaces are used. Particular attention is given to the case where the effective gravity is perpendicular to the heating surface. At the lower levels of heat flux with nucleate boiling, the heater surface superheat first increases and then decreases as the body force increases above a/g = 1. This is due to the greater contribution of nonboiling convection.

Merte, H., Jr.↗

Visual acceleration detection - Effect of sign and motion orientation

Thresholds for the detection of constant acceleration and deceleration of a discrete object moving along horizontal and vertical axes were studied. A staircase methodology was used to determine thresholds for three average velocities (0.7, 1.2, and 1.7 deg/sec). Thresholds, expressed as the proportion of velocity change, did not differ significantly among the average velocities; thus, a consistent Weber-like fraction is suggested by the data. Furthermore, there was an interaction between the axis of motion (horizontal or vertical) and the sign of the velocity change (acceleration or deceleration): accelerations were easier to detect along the vertical axis, decelerations along the horizontal axis.

Calderone, Jack B.↗

Maintenance = reuse-oriented software development

Maintenance is viewed as a reuse process. In this context, a set of models that can be used to support the maintenance process is discussed. A high level reuse framework is presented that characterizes the object of reuse, the process for adapting that object for its target application, and the reused object within its target application. Based upon this framework, a qualitative comparison is offered of the three maintenance process models with regard to their strengths and weaknesses and the circumstances in which they are appropriate. To provide a more systematic, quantitative approach for evaluating the appropriateness of the particular maintenance model, a measurement scheme is provided, based upon the reuse framework, in the form of an organized set of questions that need to be answered. To support the reuse perspective, a set of reuse enablers are discussed.

Basili, Victor R.↗

An interplanetary planar magnetic structure oriented at a large (about 80 deg) angle to the Parker spiral

Magnetic field structures in the solar wind, characterized by a variation of the field vectors within a plane inclined to the ecliptic ('Planar Magnetic Structures', PMSs), were reported recently (Nakagawa et al., 1989). These PMSs have the property that the plane of variation of the field also contains the nominal Parker spiral direction. An observation of a PMS where the direction of the line of intersection of the plane of field variation with the ecliptic plane makes a large (about 80 deg) angle to the Parker spiral direction is presented. Furthermore, the angular variables of the field (1) vary over a restricted range, and (2) are linearly related. The latter property is related to the former. Currently proposed models for the origin of PMS, inasmuch as they require field configurations which retain strict alignment with the Parker spiral direction from formation to observation, are probably incomplete.

Farrugia, M. W.↗

Object-oriented feature-tracking algorithms for SAR images of the marginal ice zone

An unsupervised method that chooses and applies the most appropriate tracking algorithm from among different sea-ice tracking algorithms is reported. In contrast to current unsupervised methods, this method chooses and applies an algorithm by partially examining a sequential image pair to draw inferences about what was examined. Based on these inferences the reported method subsequently chooses which algorithm to apply to specific areas of the image pair where that algorithm should work best.

Daida, Jason↗

Heat transfer and pressure drop in a compact pin-fin heat exchanger with pin orientation at 18 deg to the flow direction

The heat transfer and pressure drop characteristics of a novel, compact heat exchanger in helium gas were measured at 3.5 MPa and Reynolds numbers of 450 to 12,000. The pin-fin specimen consisted of pins, 0.51 mm high and spaced 2.03 mm on centers, spanning a channel through which the helium flows; the angle of the row of pins to the flow direction was 18 deg. The specimen was radiatively heated on the top side at heat fluxes up to 74 W/sq cm and insulated on the back side. Correlations were developed for the friction factor and Nusselt number. The Nusselt number compares favorably to those of past studies of staggered pin-fins, when the measured temperatures are extrapolated to the temperature of the wall-fluid interface.

Olson, D. A.↗