Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “metallic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Oxygen–Chlorine Chemisorption Scaling for Seawater Electrolysis on Transition Metals: The Role of Redox

To clarify what controls species oxidation selectivity in seawater electrolysis, density functional theory (DFT) is used to identify chemisorption enthalpy trends and scaling relations for the simplest relevant adsorbates (O, Cl, and H) on relevant surfaces of 3d transition metals, as well as Pd and Pt, in face-centered-cubic and, if different, their ground-state crystal structures. Approximations are tested for electron exchange-correlation (XC) and van der Waals interactions to assess their ability to reproduce experimental adsorption enthalpies of H and O on Pt(111). The vdW-uncorrected generalized gradient approximation to XC of Perdew, Burke, and Ernzerhof (PBE) agrees most closely with experiments. Using DFT-PBE thereafter, it is determined that the O chemisorption enthalpy on this wide range of transition-metal surfaces is proportional to the sum of first and second atomic ionization energies, akin to a Born–Haber cycle for a redox reaction, indicating that metal redox activity controls O chemisorption strength. Then it is shown that the O and Cl chemisorption enthalpies are strongly correlated, suggesting that the transition metals considered will oxidize unselectively water and Cl – . This strong correlation appears also for crystal reduction potentials of binary oxides and chlorides, indicating a fundamental challenge for future seawater electrode materials design.

08 HYDROGEN↗
DOE OSTI2020

Fast-Charging and Ultrahigh-Capacity Lithium Metal Anode Enabled by Surface Alloying

Li metal anodes are going through a great revival but they still encounter grand challenges. One often neglected issue is that most reported Li metal anodes are only cyclable under relatively low current density (<5 mA cm -2 ) and small areal capacity (<5 mAh cm -2 ), which essentially limits their high-power applications and results in ineffective Li utilization (<1%). Herein, it is reported that surface alloyed Li metal anodes can enable reversible cycling with ultrafast rate and ultralarge areal capacity. Low-cost Si wafers are used and are chemically etched down to 20-30 mu m membranes. Simply laminating a Si membrane onto Li foil results in the formation of LixSi alloy film fused onto Li metal with mechanical robustness and high Li-ion conductivity. Symmetric cell measurements show that the surface alloyed Li anode has excellent cycling stability, even under high current density up to 25 mA cm -2 and unprecedented areal capacity up to 100 mAh cm -2 . Furthermore, the surface alloyed Li anode is paired with amorphous MoS 3 cathode and achieves remarkable full-cell performance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ultrahigh-Rate and Long-Life Zinc–Metal Anodes Enabled by Self-Accelerated Cation Migration

Aqueous zinc ion batteries are receiving unprecedented attention owing to their markedly high safety and sustainability, yet their lifespan particularly at high rates is largely limited by the poor reversibility of zinc (Zn) metal anodes, due to the random ion diffusion and sluggish ion replenishment at reaction interface. In this work, we propose a tunnel-rich and corona-poled ferroelectric thin film coating for Zn metal anode to tackle above conundra. It is demonstrated that the poled ferroelectric coating can better deconcentrate and self-accelerate ion migration at coating/Zn interface upon electroplating process than untreated ferroelectric coating and bare Zn, thus enabling a compact and horizontally-aligned Zn morphology even at ultrahigh rates. Notably, a maximal cumulative plating capacity of over 6500 mAh cm -2 (at 10 mA cm -2 ) is achieved for the surface-modified Zn metal anode, showing extraordinary reversibility of Zn plating/stripping. This work provides new insights in stabilizing Zn metal electrodeposition at the scale of interfacial ion diffusion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

A Solution-Processable High-Modulus Crystalline Artificial Solid Electrolyte Interphase for Practical Lithium Metal Batteries

The solid electrolyte interphase (SEI) has been identified as a key challenge for Li metal anodes. The brittle and inhomogeneous native SEI generated by parasitic reactions between Li and liquid electrolytes can devastate battery performance; therefore, artificial SEIs (ASEIs) have been proposed as an effective strategy to replace native SEIs. Herein, as a collaboration between academia and industrial R&D teams, a multifunctional (crystalline, high modulus, and robust, Li + ion conductive, electrolyte-blocking, and solution processable) ASEI material, LiAl-FBD (where “FBD” refers to 2,2,3,3-tetra-fluoro-1,4-butanediol), for improving Li metal battery performance is designed and synthesized. The LiAl-FBD crystal structure consists of Al 3+ ions bridged by FBD 2– ligands to form anion clusters while Li + ions are loosely bound at the periphery, enabling an Li + ion conductivity of 9.4 × 10 –6 S cm –1 . Further, the fluorinated, short ligands endow LiAl-FBD with electrolyte phobicity and high modulus. The ASEI is found to prevent side reactions and extend the cycle life of Li metal electrodes. Specifically, pairing LiAl-FBD coated 50 μm thick Li with industrial 3.5 mAh cm –2 NMC811 cathode and 2.8 μL mAh –1 lean elec-trolyte, the Li metal full cells show superior cycle life compared to bare ones, achieving 250 cycles at 1 mA cm –2 .

25 ENERGY STORAGE↗
DOE OSTI2022

Current‐Dependent Lithium Metal Growth Modes in “Anode‐Free” Solid‐State Batteries at the Cu|LLZO Interface

Abstract Controlling the lithium growth morphology in lithium reservoir‐free cells (RFCs), so‐called “anode‐free” solid‐state batteries, is of key interest to ensure stable battery operation. Despite several benefits of RFCs like improved energy density and easier fabrication, issues during the charging of the cell hinder the transition from lithium metal batteries with a lithium reservoir layer to RFCs. In RFCs, the lithium metal anode is plated during the first charging step at the interface between a metal current collector and the solid electrolyte, which is prone to highly heterogeneous growth instead of the desired homogeneous film‐like growth. Herein, the lithium morphology during the first charging step in RFCs is explored as a function of current density and current collector thickness. Using operando scanning electron microscopy, an increase in the lithium particle density is observed with increasing current density at the Cu|Li 6.25 Al 0.25 La 3 Zr 2 O 12 interface. This observation is then applied to improve the area coverage of lithium by pulsed plating. It is also shown that thin current collectors ( d = 100 nm) are unsuited for RFCs, as lithium whiskers penetrate them, resulting in highly heterogeneous interfaces. This suggests the use of thicker metal layers (several µm) to mitigate whisker penetration and facilitate homogeneous lithium plating.

25 ENERGY STORAGE↗
DOE OSTI2025

Effect of Propagating Dopant Reactivity on Lattice Oxygen Loss in LLZO Solid Electrolyte Contacted with Lithium Metal

Lithium lanthanum zirconium oxide (LLZO) is widely known as the most stable solid electrolyte against lithium metal electrodes. This thermodynamic stability can be lost by the presence of dopants which are required to stabilize the cubic phase of LLZO and can be reduced by lithium metal. However, the role of oxygen in such reactions is taken for granted. In this work, the reduction of Nb-substituted LLZO (Nb-LLZO) is explored by Li metal and shows that interfacial reactions propagate and lead to the decomposition with substantial Nb 5+ reduction deep into the bulk electrolyte. Scanning Transmission Electron Microscopy with Energy Dispersive X-ray Spectroscopy and thermogravimetric analyses show much of the reduction is due to oxygen vacancies formed, leading to increased electronic conductivity mapped with conductive Atomic Force Microscopy. Density functional theory calculations indicate oxygen release is favored by increased excess lithiation of Nb-LLZO. Electrochemical impedance of polycrystalline Nb-LLZO shows the continuous evolution of ionically resistive interphases near the lithium metal interface with Nb-LLZO while single crystals show little reactivity at room temperature and self-limiting reduction at 60°C. This work underlines the role of grain boundaries in propagating destructive solid electrolyte reactions and highlights previously unseen mechanisms involving lattice oxygen in LLZO.

Li metal, solid-state electrolytes↗
DOE OSTI2023

2,5‐Dimercapto‐1,3,4‐Thiadiazole (DMCT)‐Based Polymers for Rechargeable Metal–Sulfur Batteries

Organosulfur materials are a sustainable alternative to the present-day layered oxide cathodes in lithium-based batteries. One such organosulfur material that was intensely explored from the 1990s to early 2010s is 2,5-dimercapto-1,3,4-thiadiazole (DMCT). However, research interest declined as the electrode reactions with DMCT were assumed to be too sluggish to be practical. Armed with the advances in metal–sulfur batteries, we revisit DMCT-based materials in the form of poly[tetrathio-2,5-(1,3,4-thiadiazole)], referred to as pDMCT-S. With an appropriate choice of electrode design and electrolyte, pDMCT-S cathode paired with a Li-metal anode shows a capacity of 715 mA h g −1 and a Coulombic efficiency of 97.7% at a C/10 rate, thus quelling the concerns of sluggish reactions. Surprisingly, pDMCT-S shows significantly improved long-term cyclability compared to a sulfur cathode. Investigations into the origin of the stability reveals that the discharge product Li-DMCT in its mesomeric form can strongly bind to polysulfides, preventing their dissolution into the electrolyte and shuttling. This unique mechanism solves a critical problem faced by sulfur cathodes. Encouragingly, this mechanism results in a stable performance of pDMCT-S with Na-metal cells as well. In conclusion, this study opens the potential for exploring other organic materials that have inherent polysulfide sequestering capabilities, enabling long-life metal–sulfur batteries.

2,5-dimercapto-1,3,4-thiadiazole↗
DOE OSTI2021

Behavior of copper‐containing high‐entropy alloys in harsh metal‐dusting environments

Abstract Metal dusting is still an unresolved issue at high temperatures. Currently, two material‐related strategies to mitigate metal dusting are described in the literature. On the one hand, highly alloyed materials are used, which contain large amounts of protective oxide‐forming elements, such as Cr, Al, and Si. The second mitigation strategy is based on inhibiting the catalytic effect of Fe, Ni, and Co. These elements all strongly catalyze the formation of solid carbon from the gas phase. Combining the catalytic protection of Cu alloying for metal dusting with protection by a classical alumina/chromia barrier is a native feature that high‐entropy alloys (HEAs) can offer. In this study, the behavior of different equiatomic HEAs with and without Al and/or Cu are studied when exposed at 620°C in a highly aggressive metal‐dusting environment.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Calcium–Based Metal–Organic Frameworks and Their Potential Applications

Metal–organic frameworks (MOFs) built on calcium metal (Ca-MOFs) represent a unique subclass of MOFs featuring high stability, low toxicity, and relatively low density. Ca-MOFs show considerable potential for molecular separations, electronic, magnetic, and biomedical applications, although they are not investigated as extensively as transition metal-based MOFs. Compared to MOFs made of other groups of metals, Ca-MOFs may be particularly advantageous for certain applications such as adsorption and storage of light molecules because of their gravimetric benefit, and drug delivery due to their high biocompatibility. This review intends to provide an overview on the recent development of Ca-MOFs, including their synthesis, crystal structures, important properties, and related applications. Here, various synthetic methods and techniques, types of building blocks, structure and porosity features, selected physical properties, and potential uses will be discussed and summarized. Representative examples will be illustrated for each type of important applications with a focus on their structure–property relations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Generalized Synthesis of Highly-Dispersed, Ultrafine Transition Metal Nanoparticles on Silica Spheres for Enhanced Optical Absorption

Robust synthesis of ultrafine metal nanoparticles (ufMNPs) below 5 nm with clean surfaces and strong optical absorption in the visible spectral range is challenging due to their instability originating from large surface-to-volume ratios. Here, this work reports a general strategy involving two sequential steps: i) loading metal precursor ions onto the surface of silica nanospheres (SiO x NSs) by forming a uniform coating of metal oxyhydroxide [MO y (OH) z ] through preferred surface acid–base reactions and ii) thermally reducing MO y (OH) z in forming gas at elevated temperatures to form ufMNPs evenly dispersed on the surface of SiO x NSs. The capability of this synthesis strategy is verified by loading ufMNPs of various transition metals and bimetallic combinations onto the SiO x NSs. The ufMNPs exhibit strong optical absorption enhanced by the optical scattering resonances in the SiO x NSs, which generate intense electric fields near the surface of the SiO x NSs. The SiO x NSs also support stabilizing the ufMNPs, which do not need additional organic capping reagents. The successful synthesis of SiO x -NS-supported ufMNPs with clean surfaces and enhanced optical absorption is promising for exploring the photocatalytic properties of ufMNPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

First-Row Transition Metals Complexes with Fused Oxazolidine (FOX) Ligands

In this comprehensive study, we report the syntheses and crystal structures of 6 fused oxazolidine (FOX) bicycles and 22 complexes with FOX ligands. The structures are compared to the few FOX complexes found in literature. For our investigations, we developed synthetic strategies to selectively synthesize chiral or achiral FOX bicycles with pyridyl substituents. The coordination chemistry of the chiral and achiral FOX compounds with first-row transition metals is discussed in an indepth analysis of the crystal structures. We found that the binding modes of the ligands are dependent on the configuration of the FOX backbone and on the steric demand of the substituents which were introduced to the pyridyl groups. Here, the configuration of the FOX ligands is retained during the coordination of metal(II) ions such as Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ , Cu 2+ . Reactions of these metal ions with chiral FOX ligands lead to the formation of chiral complexes. In contrast, stronger Lewis acidic metal(III) ions, such as Fe 3+ or Al 3+ , induce an isomerization of the chiral FOX ligands to their achiral diastereomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Remarkable enhancement in thermal conductivity of stainless-steel leveraging metal composite via laser powder bed fusion: 316L-Cu composite

This work aimed to significantly enhance the thermal conductivity of the SS matrix by fabricating a metal composite SS-Cu system utilizing a laser powder bed fusion process. The impact of process parameters on the microstructure of SS-Cu samples is investigated. Here, the processing and post-processing factors that influence the effective thermal conductivity of the metal composite SS-Cu system are discussed. Then, the effective thermal conductivity and mechanical properties of the SS-Cu composite are measured at room temperature and operating temperature of 300 °C. The optimized laser powder bed fusion parameters led to low Marangoni convection, high cooling rate, greater macro-segregation, and higher thermal conductivity values albeit at the cost of ductility in SS-Cu metal composite likely due to the presence of the unmelted powder particles. As-printed SS-60 vol % Cu and annealed SS-60 vol % Cu had 2.5X and 6.6X thermal conductivity enhancement, respectively. During annealing, phase separation, partial melting of Cu, and formation of a continuous network of Cu surrounding SS play a key role in enhancing the thermal conductivity of the SS-Cu metal composite structure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impact of droplet oxidation on mechanical properties of an Al-7Si-0.4Mg alloy fabricated with liquid metal jetting

Droplet-on-demand liquid metal jetting (DOD-LMJ) is a new method for additive manufacturing of bulk structural alloys. Here, we report on the microstructure, tensile, and fatigue properties of an Al-7Si-0.4Mg (A356) alloy fabricated with LMJ. Liquid metal droplets were shielded by high-purity Ar gas shroud during deposition. Atom probe tomography revealed that a few nanometers thick (Al-Mg-Si)-O oxide film formed on the droplets despite Ar gas shielding. Tensile tests on peak-aged LMJ A356 alloy showed that yield strength was isotropic (250 MPa), but ductility was lower in the build direction (6.1 ± 1.4 %) compared to the transverse direction (9.4 ± 1.0 %). Lower ductility in the build direction was attributed to delamination of metal-oxide interfaces at layer boundaries. The ductility and yield strength of LMJ A356 were similar to cast A356 and laser powder bed fused (LPBF) A357 alloys, indicating the limited impact of oxide film on tensile properties. The oxide film severely impacted the fatigue properties. Fatigue resistance of LMJ A356 was limited by fatigue crack initiation at lack-of-fusion defects and fatigue crack propagation along layer boundaries by delamination of the metal-oxide interface. The fatigue strength of LMJ A356 at 60 MPa was lower than cast A356 and LPBF A357 alloys in the peak-aged condition. This research underscores the need for managing droplet oxidation during LMJ additive manufacturing of structural alloys.

42 ENGINEERING↗
DOE OSTI2020

A self-healing liquid metal anode with PEO-Based polymer electrolytes for rechargeable lithium batteries

In this study, a Ga-Sn liquid metal alloy material is demonstrated as a self-healing anode system due to its fluidity via operando synchrotron-based transmission X-ray microscopy and X-ray diffraction experiments. Cracks formed due to volume expansions can be recovered by the fluidity of the liquid metals. By incorporating with a poly(ethylene oxide) (PEO)-based electrolyte at 60°C, the Ga-Sn anode shows a reversible lithium insertion and extraction process with a high initial discharge specific capacity of 682 mAh g -1 , followed by delivering a capacity of 462 mAh g -1 in the second cycle at C/20 rate. Furthermore, compared with its solid counterparts, the Ga-Sn liquid metal anode demonstrates a better capability to maintain its mechanical integrity and better contact with PEO solid electrolytes due to its advantageous features of the liquid. This study suggests a potential strategy to use liquid metal alloys with polymer solid electrolyte to solve the anode challenges in rechargeable lithium batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of transition metals on the evolution of polymer-derived SiOC ceramics

This work focuses on catalytic graphitization from different metals, iron (Fe), cobalt (Co), and nickel (Ni), for inducing carbon growth in silicon oxycarbides (SiOCs) during the pyrolysis. Fe, Co, and Ni-modified SiOCs were synthesized by pyrolysis to 900, 1100, and 1300 °C respectively in Ar. The transition metals induced the formation of the corresponding metal silicides, β-SiC, and graphitic carbon with the catalytic activity in the order of Fe > Co > Ni, in agreement with the activation energy calculation based on the carbon types and amounts. Lateral growth of turbostratic carbon followed a 2D grain growth process and its point-like defect density decreased based on the catalytic order of the transition metals, with SiOC/Fe having the lowest defect density. Quantitative analysis of the XPS results with Rietveld refinement illustrated that the phase separation of SiOC is more dominant than local carbothermal reduction between SiO 2 and C in the SiOC/M (M = Ni, Co, or Fe) systems. Understanding the catalytic graphitization effect of Ni, Co, and Fe on polymer derived ceramics offers new strategies in increasing high-temperature phase amounts and thus creating novel materials for heterogeneous catalysis, magnetic, and other applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Uptake of aqueous heavy metal ions (Co2+, Cu2+ and Zn2+) by calcium-aluminium-silicate-hydrate gels

Highlights: • C-A-S-H gels containing metal ions (Co{sup 2+}, Cu{sup 2+} or Zn{sup 2+}) were precipitated by a sol-gel technique. • Uptake mechanism and immobilization capacity of divalent metal ions by C-A-S-H are elucidated. • Up to ~55–60 mol% of Zn can be incorporated in defective tobermorite-type C-A-S-H. • Metal uptake by C-A-S-H is controlled mainly by isomorphous substitution for Ca ions. • Crystal-chemical features of C-A-S-H gels and implications for practical application are discussed. Calcium-aluminium-silicate-hydrate (C-A-S-H) gels containing heavy metal ions (Me: Co{sup 2+}, Cu{sup 2+} or Zn{sup 2+}) were precipitated at different Me/Si molar ratios to study the uptake mechanism and immobilization capacity. Aqueous solution chemistry and solid-phase characterization using XRD, FTIR, ESEM-EDX, TEM-HAADF and TG-DSC methods reveal threshold values for ion substitution of ~55–60 mol% for Zn, ~30–40 mol% for Co and ~25–30 mol% for Cu in defective tobermorite-type C-A-S-H with (Ca + Me)/(Si + Al) molar ratios from 0.86 to 1.04. At higher aqueous Me concentrations, Me (chloride) hydroxides start to co-precipitate. The uptake mechanism of Me ions by C-A-S-H is based on (i) isomorphous substitution of Me for Ca in the CaO layer, (ii) ion exchange in the interlayer, (iii) tetrahedral substitution (Zn) within the dreierketten chains and (iv) surface adsorption onto the C-A-S-H gel structure. Systematics in crystal-chemistry of Me-bearing C-A-S-H and implications for application and performance in natural and man-made settings are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effects of carbonation on the retention of heavy metals in chemically activated BOF slag pastes

Basic Oxygen Furnace slag contains heavy metals, including vanadium, chromium and molybdenum. The leachability of these elements determines the industrial applicability of slag-based building products. This study investigates the post‑carbonation leaching of heavy metals from activated BOF slag pastes with the focus on the activator dosage and type (sodium and potassium citrate). Results reveal that the high degree of brownmillerite hydration boosts the leachability of heavy metals as its hydration product- hydrogarnet is less stable upon carbonation. With two leaching procedures, it is demonstrated that the carbonation resistance of pastes becomes the main attribute in preventing the leaching of heavy metals. It can be enhanced by optimising the activator dosage to facilitate the hydration of C{sub 2}S and consequent structural densification.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Deep operator network surrogate for phase-field modeling of metal grain growth during solidification

A deep operator network (DeepONet) has been constructed that generates accurate representations of phase-field model simulations for evolving two dimensional metal grain morphology growing from melt. These representations serve as lower resolution, computationally efficient stand-ins for quick parameter space exploration of solutions to the the Allen-Cahn equations that dictate the phase-field model simulations. The experimental target for the phase-field model is a uranium casting system cooling a 434 g uranium charge from a maximum temperature of 1400° C at an average rate of 30° C / min , traversing the crystallographic phases of the pure metal. Experimental parameters inform the phase-field model, whose higher resolution computational model solutions are used to train the DeepONet in a given parameter space with the aim of developing a faster, more efficient method for predicting the solidifying metal's microstructure at different potential experimental values. The final DeepONet generates high accuracy, lower resolution predictions with cumulative relative approximation error over all timesteps of less than 0.5%, while ensuring solutions remain within physically feasible ranges. Further, these relative error values are comparable with other state-of-the-art DeepONet models for microstructure evolution, while significantly reducing the amount of training data required. Training a convolutional neural network simultaneously with the DeepONet, enforcing realistic values at the complex metal grain boundaries, and mathematically encoding boundary conditions into the structure of the DeepONet improved prediction accuracy and computational efficiency over a standard DeepONet model.

36 MATERIALS SCIENCE↗