SEARCH · Engineering Papers

Results for “linear equation systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Gaussian step-pressure loading of rigid viscoplastic plates

The response of a thin, rigid viscoplastic plate subjected to a spatially axisymmetric Gaussian step pressure impulse loading was studied analytically. A Gaussian pressure distribution in excess of the collapse load was applied to the plate, held constant for a length of time, and then suddenly removed. The plate deforms with monotonically increasing deflections until the dynamic energy is completely dissipated in plastic work. The simply supported plate of uniform thickness obeys the von Mises yield criterion and a generalized constitutive equation for rigid viscoplastic materials. For the small deflection bending response of the plate, the governing system of equations is essentially nonlinear. Transverse shear stress is neglected in the yield condition and rotary inertia in the equations of dynamic equilibrium. A proportional loading technique, known to give excellent approximations of the exact solution for the uniform load case, was used to linearize the problem and to obtain the analytical solutions in the form of eigenvalue expansions. The effects of load concentration, of an order of magnitude change in the viscosity of the plate material, and of load duration were examined while holding the total impulse constant.

Hayduk, R. J.↗

NASA NTRS1988

Rotordynamic analysis of a bearing tester

The properties of the solutions of a system of four coupled nonlinear differential equations that model the behavior of the rotating shaft of a bearing tester are studied. In particular, it is shown how the bounds for the rotations of these equations can be obtained from bounds for the solutions of the linearized equations. By studying the behavior of the Fourier transforms of the solution, the approach to the stability boundary can also be predicted. These conclusions are verified by means of numerical solutions of the equations, and of power spectrum density (PSD) plots.

Zalik, Richard A.↗

NASA NTRS1989

A Transient Response Method for Linear Coupled Substructures

A method is presented for determining the transient response of a discrete coordinate model of a linear structural system composed of substructures. The method is applicable to systems consisting of any number of substructures, both determinate and indeterminate interface boundaries, and any topological arrangement of the substructures. The method is simple to implement from a computational point of view because the equations of motion of each of the substructures are solved independently, and the interface boundary compatibility conditions are enforced at each integration time step by a matrix multiplication. The method is demonstrated for a structural system consisting of two beam segments and acted upon by a time dependent force. The numerical results from the demonstration problem validates the accuracy of the method. The application of this method to structural systems with changing interface boundary conditions between substructures is discussed.

Admire, J. R.↗

NASA NTRS1993

Progress in multidisciplinary design optimization at NASA Langley

Multidisciplinary Design Optimization refers to some combination of disciplinary analyses, sensitivity analysis, and optimization techniques used to design complex engineering systems. The ultimate objective of this research at NASA Langley Research Center is to help the US industry reduce the costs associated with development, manufacturing, and maintenance of aerospace vehicles while improving system performance. This report reviews progress towards this objective and highlights topics for future research. Aerospace design problems selected from the author's research illustrate strengths and weaknesses in existing multidisciplinary optimization techniques. The techniques discussed include multiobjective optimization, global sensitivity equations and sequential linear programming.

Padula, Sharon L.↗

NASA NTRS1998

Congruence Approximations for Entrophy Endowed Hyperbolic Systems

Building upon the standard symmetrization theory for hyperbolic systems of conservation laws, congruence properties of the symmetrized system are explored. These congruence properties suggest variants of several stabilized numerical discretization procedures for hyperbolic equations (upwind finite-volume, Galerkin least-squares, discontinuous Galerkin) that benefit computationally from congruence approximation. Specifically, it becomes straightforward to construct the spatial discretization and Jacobian linearization for these schemes (given a small amount of derivative information) for possible use in Newton's method, discrete optimization, homotopy algorithms, etc. Some examples will be given for the compressible Euler equations and the nonrelativistic MHD equations using linear and quadratic spatial approximation.

Barth, Timothy J.↗

NASA NTRS1986

Three-dimensional grids as solutions of elliptic systems

An elliptic grid generation scheme is described which produces a curvilinear, boundary-fitted grid for highly swept wings with sharp leading edges. The three-dimensional integration domain is segmented in successive crossflow sections wherein the physical coordinates are transformed to computational coordinates by solving an elliptic set of two quasi-linear differential equations. Grid points are clustered in the vicinity of the wing surface, especially in the neighborhood of the leading edges. The formulation of the source terms in the equations governing the transformation contains adjustable parameters which are determined from limiting forms of the elliptic equations along the boundaries. The source terms are assigned to each grid point by interpolation of these parameters into the interior domain. The formulation does not depend on the boundary shape or on the distribution of the grid points along the boundaries. For the first time, the discretized governing equations have been solved using a fast AF1 iteration scheme.

Hartwich, P.-M.↗

NASA NTRS1986

Discrete-time Markovian-jump linear quadratic optimal control

This paper is concerned with the optimal control of discrete-time linear systems that possess randomly jumping parameters described by finite-state Markov processes. For problems having quadratic costs and perfect observations, the optimal control laws and expected costs-to-go can be precomputed from a set of coupled Riccati-like matrix difference equations. Necessary and sufficient conditions are derived for the existence of optimal constant control laws which stabilize the controlled system as the time horizon becomes infinite, with finite optimal expected cost.

Chizeck, H. J.↗

NASA NTRS1987

Nonlinear feedback control of multiple robot arms

Multiple coordinated robot arms are modeled by considering the arms: (1) as closed kinematic chains, and (2) as a force constrained mechanical system working on the same object simultaneously. In both formulations a new dynamic control method is discussed. It is based on a feedback linearization and simultaneous output decoupling technique. Applying a nonlinear feedback and a nonlinear coordinate transformation, the complicated model of the multiple robot arms in either formulation is converted into a linear and output decoupled system. The linear system control theory and optimal control theory are used to design robust controllers in the task space. The first formulation has the advantage of automatically handling the coordination and load distribution among the robot arms. In the second formulation, by choosing a general output equation, researchers can superimpose the position and velocity error feedback with the force-torque error feedback in the task space simultaneously.

Tarn, T. J.↗

NASA NTRS1989

A parametric heat transfer study for cryogenic ball bearings in SSME HPOTP

A numerical modeling is to examine the effects of coolant convective heat transfer coefficient and frictional heating on the local temperature characteristics of a ball element in Space Shuttle Main Engine (SSME) High Pressure Oxidizer Turbopump (HPOTP) bearing. The present modeling uses a control-volume based, finite-difference method to solve the non-dimensionalized heat conduction equation in spherical coordinate system. The dimensionless temperature is found as a function of Biot number, heat flux ratio between the two race contacts, and location in the ball. The current results show that, for a given cooling capability, the ball temperature generally increases almost linearly with the heat input from the race-contacts. This increase is always very high at one of the two contacts. An increase in heat transfer coefficient generally reduces the ball temperature and alleviates the temperature gradient, except for the regions very close to the race contacts. For a 10-fold increase of heat transfer coefficient, temperature decrease is 35 percent for the average over entire ball, and 10 percent at the inner-race contact. The corresponding change of temperature gradient displays opposing trends between the regions immediately adjacent to the contacts and the remaining portion of the ball. The average temperature gradient in the vicinity of both contacts increases approximately 70 to 100 percent. A higher temperature gradient produces excessive thermal stress locally which may be detrimental to the material integrity. This, however, is the only unfavorable issue for an increase of heat transfer coefficient.

Chyu, Mingking K.↗

NASA NTRS1996

Computations of Drop Collision and Coalescence

Computations of drops collisions, coalescence, and other problems involving drops are presented. The computations are made possible by a finite difference/front tracking technique that allows direct solutions of the Navier-Stokes equations for a multi-fluid system with complex, unsteady internal boundaries. This method has been used to examine the various collision modes for binary collisions of drops of equal size, mixing of two drops of unequal size, behavior of a suspension of drops in linear and parabolic shear flows, and the thermal migration of several drops. The key results from these simulations are reviewed. Extensions of the method to phase change problems and preliminary results for boiling are also shown.

Tryggvason, Gretar↗

NASA NTRS1971

Concerning the origin of novae and U Geminorum stars

The dynamical stability of the contact component in a semi-detached binary system is investigated by a linear time dependent analysis. The boundary condition imposed on the photosphere by the Roche lobe is assumed to be one of constant pressure over the whole surface of the lobe, which is treated as being spherically symmetric. The eigenvalues of the linear equation of motion are evaluated for sequences of stellar envelope models under the constraint of this boundary condition. An extensive region in the Hertzprung-Russell diagram is found to be dynamically unstable. This region coincides almost precisely with that predicted by a previous quasi-static study. Time scales for the growth of the instability are also evaluated. Color observations of several novae and U Geminorum stars are discussed in an attempt to provide semi-empirical tests of the proposed theoretical model of the outbursts. In particular the track in the H-R diagram of the U Geminorum star, EM Cygni, is shown to be consistent with an outburst which is purely a temperature change at constant radius, as is demanded by the theory.

Bath, G. T.↗

NASA NTRS1977

Failure detection by pilots during automatic landing - Models and experiments

A model is proposed to describe the pilot as a monitor of automatic landing systems. The failures treated are equivalent to the addition of a dynamic change in the mean of the observation process. The failure detection model of the pilot consists of two stages: a linear estimator (Kalman filter) and a decision mechanism based on sequential analysis. The filter equations are derived from a simplified version of the linearized dynamics of the airplane and the control loop. The perceptual observation noise is modified to include the effects of allocation of attention among the several instruments. The final result is a simple model consisting of a high-pass filter to produce the observation residuals and a decision function which is a pure integration of the residuals minus a bias term. The dynamics of a Boeing 707 were used to simulate the fully coupled final approach in a fixed-base simulator. Observers monitored the approaches and detected the failures; their performance was compared with the predictions of the model.

Gai, E. G.↗

NASA NTRS1986

On the Lagrangian turbulence in continua

Lagrangian turbulence in continua is introduced as a failure of Euclidian metric of a material system of coordinates, and it is shown that the Ricci tensor of such a system of coordinates may be used as a measure of L-turbulence. The conditions which are sufficient, though not necessary, for instability of an initially infinitesimal disturbance of this tensor are determined for fluid, elastic, and viscoelastic bodies. The results are obtained from the linearized equations, and therefore the growth of unstable solutions may be bounded.

Zak, M.↗

NASA NTRS1990

Least-squares finite element methods for compressible Euler equations

A method based on backward finite differencing in time and a least-squares finite element scheme for first-order systems of partial differential equations in space is applied to the Euler equations for gas dynamics. The scheme minimizes the L-sq-norm of the residual within each time step. The method naturally generates numerical dissipation proportional to the time step size. An implicit method employing linear elements has been implemented and proves robust. For high-order elements, computed solutions based on the L-sq method may have oscillations for calculations at similar time step sizes. To overcome this difficulty, a scheme which minimizes the weighted H1-norm of the residual is proposed and leads to a successful scheme with high-degree elements. Finally, a conservative least-squares finite element method is also developed. Numerical results for two-dimensional problems are given to demonstrate the shock resolution of the methods and compare different approaches.

Jiang, Bo-Nan↗

NASA NTRS1992

Microgravity vibration isolation: Optimal preview and feedback control

In order to achieve adequate low-frequency vibration isolation for certain space experiments an active control is needed, due to inherent passive-isolator limitations. Proposed here are five possible state-space models for a one-dimensional vibration isolation system with a quadratic performance index. The five models are subsets of a general set of nonhomogeneous state space equations which includes disturbance terms. An optimal control is determined, using a differential equations approach, for this class of problems. This control is expressed in terms of constant, Linear Quadratic Regulator (LQR) feedback gains and constant feedforward (preview) gains. The gains can be easily determined numerically. They result in a robust controller and offers substantial improvements over a control that uses standard LQR feedback alone.

Hampton, R. D.↗

NASA NTRS1996

Satellite Angular Rate Estimation From Vector Measurements

This paper presents an algorithm for estimating the angular rate vector of a satellite which is based on the time derivatives of vector measurements expressed in a reference and body coordinate. The computed derivatives are fed into a spacial Kalman filter which yields an estimate of the spacecraft angular velocity. The filter, named Extended Interlaced Kalman Filter (EIKF), is an extension of the Kalman filter which, although being linear, estimates the state of a nonlinear dynamic system. It consists of two or three parallel Kalman filters whose individual estimates are fed to one another and are considered as known inputs by the other parallel filter(s). The nonlinear dynamics stem from the nonlinear differential equation that describes the rotation of a three dimensional body. Initial results, using simulated data, and real Rossi X ray Timing Explorer (RXTE) data indicate that the algorithm is efficient and robust.

Azor, Ruth↗

NASA NTRS1996

Analytic Solutions of the Vector Burgers Equation

The well-known analytical solution of Burgers' equation is extended to curvilinear coordinate systems in three dimensions by a method that is much simpler and more suitable to practical applications than that previously used. The results obtained are applied to incompressible flow with cylindrical symmetry, and also to the decay of an initially linearly increasing wind.

Nerney, Steven↗

NASA NTRS1999

Signal Prediction With Input Identification

A novel coding technique is presented for signal prediction with applications including speech coding, system identification, and estimation of input excitation. The approach is based on the blind equalization method for speech signal processing in conjunction with the geometric subspace projection theory to formulate the basic prediction equation. The speech-coding problem is often divided into two parts, a linear prediction model and excitation input. The parameter coefficients of the linear predictor and the input excitation are solved simultaneously and recursively by a conventional recursive least-squares algorithm. The excitation input is computed by coding all possible outcomes into a binary codebook. The coefficients of the linear predictor and excitation, and the index of the codebook can then be used to represent the signal. In addition, a variable-frame concept is proposed to block the same excitation signal in sequence in order to reduce the storage size and increase the transmission rate. The results of this work can be easily extended to the problem of disturbance identification. The basic principles are outlined in this report and differences from other existing methods are discussed. Simulations are included to demonstrate the proposed method.

Juang, Jer-Nan↗