Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geologic characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Integrated experimental studies of pore structure and fluid uptake in the Bossier Shale in eastern Texas, USA

Within the Haynesville-Bossier Shale complex, the Bossier Shale has not been extensively studied by either industry and academia, despite it being an unconventional gas reservoir and a potential caprock for carbon storage in the underlaying Haynesville Shale. The lack of knowledge of the complex pore structures and fluid-rock interactions hinders the effective extraction of gas and the characterization of fluid reservoirs and sealing capacity. Integrated experimental studies of pore structure and fluid-rock interactions were conducted in seven Bossier Shale core samples collected in eastern Texas. Petrographic, geochemical, and petrophysical properties such as mineral composition, organic richness, thermal maturity, porosity, pore/pore throat diameter distribution, water-accessible pores, liquid water imbibition, and water vapor adsorption were characterized using complementary approaches of thin-section petrography, scanning electron microscopy, X-ray diffraction, total organic matter, pyrolysis, mercury intrusion porosimetry, nuclear magnetic resonance, (Ultra-) small angle X-rays scattering as well as small angle neutron scattering with deuterated liquids and contrast variation. Further, the results show that the thermally mature Bossier Shales are composed of mixed argillaceous mudstone, mixed mudstone, and mixed carbonate mudstone. The shale contains both organic and inorganic pores, with porosities of 3.24-9.37 %, pore-to-throat ratios of 1.65 to 19.4, and water-accessible pores accounting for 28.7-72.6 % of total pores. Approaches of liquid water imbibition and water vapor adsorption, with and without direct contact of water with shale samples, indicate that liquid water first enters the nano-sized pores under high capillary pressures, and water vapor adsorption is mainly controlled by both clay minerals and pores with diameters less than 10 nm. These findings contribute to a better understanding of pore structures and water-shale interactions and their controlling factors in the Bossier Shale.

58 GEOSCIENCES↗
DOE OSTI2025

Clarifying the trophic state concept to advance macroscale freshwater science and management

For over a century, ecologists have used the concept of trophic state (TS) to characterize an aquatic ecosystem's biological productivity. However, multiple TS classification schemes, each relying on a variety of measurable parameters as proxies for productivity, have emerged to meet use‐specific needs. Frequently, chlorophyll a, phosphorus, and Secchi depth are used to classify TS based on autotrophic production, whereas phosphorus, dissolved organic carbon, and true color are used to classify TS based on both autotrophic and heterotrophic production. Both classification approaches aim to characterize an ecosystem's function broadly, but with varying degrees of autotrophic and heterotrophic processes considered in those characterizations. Moreover, differing classification schemes can create inconsistent interpretations of ecosystem integrity. For example, the US Clean Water Act focuses exclusively on algal threats to water quality, framed in terms of eutrophication in response to nutrient loading. This usage lacks information about non‐algal threats to water quality, such as dystrophication in response to dissolved organic carbon loading. Consequently, the TS classification schemes used to identify eutrophication and dystrophication may refer to ecosystems similarly (e.g., oligotrophic and eutrophic), yet these categories are derived from different proxies. These inconsistencies in TS classification schemes may be compounded when interdisciplinary projects employ varied TS frameworks. Even with these shortcomings, TS can still be used to distill information on complex aquatic ecosystem function into a set of generalizable expectations. The usefulness of distilling complex information into a TS index is substantial such that usage inconsistencies should be explicitly addressed and resolved. To emphasize the consequences of diverging TS classification schemes, we present three case studies for which an improved understanding of the TS concept advances freshwater research, management efforts, and interdisciplinary collaboration. To increase clarity in TS, the aquatic sciences could benefit from including information about the proxy variables, ecosystem type, as well as the spatiotemporal domains used to classify TS. As the field of aquatic sciences expands and climatic irregularity increases, we highlight the importance of re‐evaluating fundamental concepts, such as TS, to ensure their compatibility with evolving science.

classification↗
DOE OSTI2024

DEEPEN: Final 3D PFA Favorability Models and 2D Favorability Maps at Newberry Volcano

Part of the DEEPEN (DE-risking Exploration of geothermal Plays in magmatic ENvironments) project involved developing and testing a methodology for a 3D play fairway analysis (PFA) for multiple play types (conventional hydrothermal, superhot EGS, and supercritical). This was tested using new and existing geoscientific exploration datasets at Newberry Volcano. This GDR submission includes images, data, and models related to the 3D favorability and uncertainty models and the 2D favorability and uncertainty maps. The DEEPEN PFA Methodology, detailed in the journal article below, is based on the method proposed by Poux & O'brien (2020), which uses the Leapfrog Geothermal software with the Edge extension to conduct PFA in 3D. This method uses all available data to build a 3D geodata model which can be broken down into smaller blocks and analyzed with advanced geostatistical methods. Each data set is imported into a 3D model in Leapfrog and divided into smaller blocks. Conditional queries can then be used to assign each block an index value which conditionally ranks each block's favorability, from 0-5 with 5 being most favorable, for each model (e.g., lithologic, seismic, magnetic, structural). The values between 0-5 assigned to each block are referred to as index values. The final step of the process is to combine all the index models to create a favorability index. This involves multiplying each index model by a given weight and then summing the resulting values. The DEEPEN PFA Methodology follows this approach, but split up by the specific geologic components of each play type. These components are defined as follows for each magmatic play type: 1. Conventional hydrothermal plays in magmatic environments: Heat, fluid, and permeability 2. Superhot EGS plays: Heat, thermal insulation, and producibility (the ability to create and sustain fractures suitable for and EGS reservoir) 3. Supercritical plays: Heat, supercritical fluid, pressure seal, and producibility (the proper permeability and pressure conditions to allow production of supercritical fluid) More information on these components and their development can be found in Kolker et al., (2022). For the purposes of subsurface imaging, it is easier to detect a permeable fluid-filled reservoir than it is to detect separate fluid and permeability components. Therefore, in this analysis, we combine fluid and permeability for conventional hydrothermal plays, and supercritical fluid and producibility for supercritical plays. We also project the 3D favorability volumes onto 2D surfaces for simplified joint interpretation, and we incorporate an uncertainty component. Uncertainty was modeled using the best approach for the dataset in question, for the datasets where we had enough information to do so. Identifying which subsurface parameters are the least resolved can help qualify current PFA results and focus future efforts in data collection. Where possible, the resulting uncertainty models/indices were weighted using the same weights applied to the respective datasets, and summed, following the PFA methodology above, but for uncertainty.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Pore-Scale Microenvironments Control Anthropogenic Carbon Mineralization Outcomes in Basalt

Thin sections and hand samples from 50 sidewall cores from the Wallula Basalt Pilot Demonstration, a basaltic carbon sequestration demonstration, provided the opportunity for the in-depth analysis of carbon mineralization induced by the injection of supercritical CO 2 . In this study, we used optical petrography and scanning electron microscopy to characterize the physical and chemical characteristics of the basalt components influenced by carbon mineralization reactions from all available hand samples and thin sections within the three CO 2 injection zones and caprock flow interiors. We found extensive carbonate mineralization, mostly in the form of nodules that were shown to be chemically zoned: Ca-dominant in the core regions and Ca-bearing Fe-dominant in the outer regions. Carbonate mineralization also took the form of fracture-filling carbonate cement, and acicular aragonite was also observed. Overall, we clarified the structural and paragenetic relationships between newly formed minerals, identifying a new fibro-palagonite-like, poorly crystalline silicate phase that grew on the carbonate nodules and pore-lining zeolites. Here we observed Fe-dominant carbonate precipitates surrounding acicular aragonite and rhombohedral Ca-carbonate cores, whereas previous studies of these zoned nodules did not observe these structures. A comprehensive accounting of the carbon mineralization products is vital to understand and predict the behavior of supercritical CO 2 in the subsurface given both the diversity of the host rock between and within injection zones, especially considering that the morphology and chemistry of the diverse precipitates are influenced by the pore-scale microenvironments of the basalt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Zonal Patterns in Late Quaternary Tropical South American Precipitation

Speleothem oxygen isotope records (δ 18 O) of tropical South American rainfall in the late Quaternary show a zonal “South American Precipitation Dipole” (SAPD). The dipole is characterized by opposing east-west precipitation anomalies compared to the present—wetter in the east and drier in the west at the mid-Holocene (~7 ka), and drier in the east and wetter in the west at the Last Glacial Maximum (~21 ka). However, the SAPD remains enigmatic because it is expressed differently in western versus eastern δ18O records and isotope-enabled climate model simulations usually misrepresent the magnitude and/or spatial pattern of δ 18 O change. Here, we address the SAPD enigma in two parts. First, we re-interpret the δ 18 O data to account for upwind rainout effects that are known to be pervasive in tropical South America, but are not always considered in Quaternary paleoclimate studies. Our revised interpretation reconciles the δ 18 O data with cave infiltration and other proxy records, and indicates that the centroid of tropical South American rainfall has migrated zonally over time. Second, using an energy balance model of tropical atmospheric circulation, we hypothesize that zonal migration of the precipitation centroid can be explained by regional energy budget shifts, such as changing Saharan albedo associated with the African Humid Period, that have not been modeled in previous SAPD studies. This hypothesis of a migrating precipitation centroid presents a new framework for interpreting δ18O records from tropical South America and may help explain the zonal rainfall anomalies that predate the late Quaternary.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The ATTO-Campina site: A new observatory for tropical convection and gas-aerosol-cloud-precipitation interactions in the Amazon

We present results from ATTO-Campina, a new permanent observational site in central Amazon, about 4 km from the ATTO towers. Operational since 2020, ATTO-Campina characterizes atmospheric, cloud and rainfall properties through remote sensing. The goal is to provide continuous, complementary measurements to the ATTO towers, addressing the rainforest’s complex gas-aerosol-cloud-precipitation dynamics. Using a 3.5-year dataset, we classified convective clouds into three types: shallow cumulus (ShCu), congestus (Con) or (Deep) clouds. The shallow-to-deep transition takes about three hours, starting with ShCu formation at 11:00 local time. The accumulated rainfall peak follows at about 16:00. Only weak downdrafts are present in the upper troposphere where previous studies indicate new particle formation (NPF) occurrence. Strong downdrafts are mostly limited to heights below 5 km. Con and Deep convective days have higher concentrations of ultrafine aerosol and lower concentrations of accumulation-mode particles compared to ShCu. Convective clouds also significantly modify gas mixing ratios. Deep convective clouds are associated with high near-surface O3, consistent with downward transport from the midtroposphere. Our results showcase the added detail achieved by integrating data from the ATTO towers and ATTO-Campina sites. Together, these sites support better understanding of interconnected gas-aerosol-cloud-precipitation processes in the Amazon and their evolution under climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Linking Dissolved Organic Matter Composition to Landscape Properties in Wetlands Across the United States of America

Abstract Wetlands are integral to the global carbon cycle, serving as both a source and a sink for organic carbon. Their potential for carbon storage will likely change in the coming decades in response to higher temperatures and variable precipitation patterns. We characterized the dissolved organic carbon (DOC) and dissolved organic matter (DOM) composition from 12 different wetland sites across the USA spanning gradients in climate, landcover, sampling depth, and hydroperiod for comparison to DOM in other inland waters. Using absorption spectroscopy, parallel factor analysis modeling, and ultra‐high resolution mass spectroscopy, we identified differences in DOM sourcing and processing by geographic site. Wetland DOM composition was driven primarily by differences in landcover where forested sites contained greater aromatic and oxygenated DOM content compared to grassland/herbaceous sites which were more aliphatic and enriched in N and S molecular formulae. Furthermore, surface and porewater DOM was also influenced by properties such as soil type, organic matter content, and precipitation. Surface water DOM was relatively enriched in oxygenated higher molecular weight formulae representing HUP High O/C compounds than porewaters, whose DOM composition suggests abiotic sulfurization from dissolved inorganic sulfide. Finally, we identified a group of persistent molecular formulae (3,489) present across all sites and sampling depths (i.e., the signature of wetland DOM) that are likely important for riverine‐to‐coastal DOM transport. As anthropogenic disturbances continue to impact temperate wetlands, this study highlights drivers of DOM composition fundamental for understanding how wetland organic carbon will change, and thus its role in biogeochemical cycling.

Environmental Sciences & Ecology↗
DOE OSTI2020

What can the GRACE seasonal cycle tell us about lake-aquifer interactions?

Lake-aquifer interactions have been the subject of investigation and debate for decades. Traditional investigation methods include measurement of water flux across the groundwater-surface water interface, application of heat and environmental tracer methods, conducting numerical simulations of the water flow, and mass balance-based approaches. We first review, evaluate and describe the different approaches that have been applied for examining lake-aquifer interactions and propose an additional complementary approach. While the leakage from lakes and its slow movement through porous media (laminar flow) is well characterized by existing methods, modeling the rapid and turbulent flow through preferred pathways (faults/karst) remains a challenging task. To better understand the nature, and the full scale, of the lake aquifer interactions, and using Lake Nasser and the underlying Dakhla subbasin of the Nubian Sandstone Aquifer System (NSAS) in the Western Desert of Egypt (area: 0.66 x 10 6 km 2 ) as a test site, we examine, model, and correlate temporally and spatially, the variations in Gravity Recovery and Climate Experiment terrestrial water storage (GRACE TWS ) solutions, with precipitation, lake levels, area, and water volume. We review current GRACE applications in hydrology and present our novel approach. Findings include: firstly, large seasonal fluctuations (peak: Nov./Dec.; trough: July/Aug.) in Lake Nasser's surface water levels (average annual fluctuations: from 3.7 m to 7.5 m), area (average area: 3622 km 2 but up to 4530 km 2 ), and volume (annual average: 13.4 km 3 , and up to 34 km 3 ) are observed throughout years 2006 to 2015. These fluctuations are accompanied by an increase in GRACE TWS (average: 50 ± 13 mm/yr, up to 77 ± 18 mm/yr) over Lake Nasser and by a progression of a front of increasing GRACE TWS values (> 50 ± 13 mm) away from the lake reaching distances of up to 700 km some 3 to 5 months following peak lake level periods. The areas witnessing the seasonal increase in GRACE TWS display a progressive increase in phase and decrease in amplitude with distance from the lake. Secondly, the negligible precipitation over the Dakhla subbasin cannot account for the observed seasonal GRACE TWS patterns and neither can the leakage signal from Lake Nasser. Thirdly, overall similarities in the distribution of GRACE TWS seasonal spatial patterns are observed. During high lake level periods (e.g., Dec. 2007; Feb. 2015) additional, and more distant, areas from Lake Nasser saw increases in GRACE TWS and vice versa during low lake level periods (e.g., July 2006; Aug. 2010). These observations are consistent with Lake Nasser being the main source of modern recharge for the Dakhla subbasin and suggest a new conceptual model for the subbasin: a slow groundwater flow through a porous matrix and a rapid groundwater flow along a network of faults, fractures, and karst topography across the matrix. We suggest that the proposed conceptual model for the interaction between Lake Nasser and the Dakhla subbasin could be applicable to aquifers of similar geologic, climatic, and hydrologic settings worldwide and that approaches similar to those advocated here could be used to investigate the validity of this suggestion.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The root-zone soil moisture spectrum in a mediterranean ecosystem

Storage of water within soil pores of the root zone introduce memory effects in the dynamics of soil moisture that are considerably longer than the integral timescale of many atmospheric processes. Thus, hydro-climatic states can be “sustained” through land-surface heat and water vapor fluxes primarily because they can “feed off” on this long-term soil moisture memory. Root-zone soil moisture memory is only but one feature characterizing the spectrum of soil moisture dynamics, which is analyzed here using a combination of long-term measurements and models. In particular, the spectrum of root-zone soil moisture content in a Mediterranean ecosystem is examined using 14-years of half-hourly measurements. A distinguishing hydro-climatic feature in such ecosystems is that sources (mainly rainfall) and sinks (mainly evapotranspiration) of soil moisture are roughly out of phase with each other. For over 4 decades of time scales and 7 decades of energy, the canonical shape of the measured soil moisture spectrum is shown to be approximately Lorentzian determined by the soil moisture variance and its memory but with two exceptions: the occurrences of a peak at diurnal-to-daily time scales and a weaker peak at near annual time scales. Model calculations and spectral analysis demonstrate that diurnal and seasonal variations in hydroclimate forcing responsible for variability in evapotranspiration had minor impact on the normalized shape of the soil moisture spectrum. However, their impact was captured by adjustments in the temporal variance. These findings indicate that precipitation and not evapotranspiration variability dominates the multi-scaling properties of soil moisture variability consistent with prior climate model simulations. Furthermore, the soil moisture memory inferred by the annual peak of soil moisture (340 d) is consistent with climate model simulations, while the memory evaluated from the loss function of a linearized mass balance approach leads to a smaller value (50 d), highlighting the effect of weak non-stationarity on soil moisture variability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Efficient marine environmental characterisation to support monitoring of geological CO 2 storage

Carbon capture and storage is key for mitigating greenhouse gas emissions, and offshore geological formations provide vast CO 2 storage potential. Monitoring of sub-seabed CO 2 storage sites requires that anomalies signifying a loss of containment be detected, and if attributed to storage, quantified and their impact assessed. However, monitoring at or above the seabed is only useful if one can reliably differentiate abnormal signals from natural variability. Baseline acquisition is the default option for describing the natural state, however we argue that a comprehensive baseline assessment is likely expensive and time-bound, given the multi-decadal nature of CCS operations and the dynamic heterogeneity of the marine environment. We present an outline of the elements comprising an efficient marine environmental baseline to support offshore monitoring. We demonstrate that many of these elements can be derived from pre-existing and ongoing sources, not necessarily related to CCS project development. We argue that a sufficient baseline can be achieved by identifying key emergent properties of the system rather than assembling an extensive description of the physical, chemical and biological states. Further, that contemporary comparisons between impacted and non-impacted sites are likely to be as valuable as before and after comparisons. Furthermore, as these emergent properties may be nuanced between sites and seasons and comparative studies need to be validated by the careful choice of reference site, a site-specific understanding of the scales of heterogeneity will be an invaluable component of a baseline.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Mechanistic understanding of carbon mineralization in fracture systems using microfluidics

Carbon mineralization in mafic and ultramafic rocks presents an opportunity for permanent carbon storage in the Earth's subsurface. However, due to their lower permeability, pre-existing fracture networks are key for mineralization to occur. Therefore, to fully develop this technology, a mechanistic understanding of the mineralization behavior in fractures with the consideration of hydrodynamic components is required. We use high-pressure microfluidics to investigate key mechanisms influencing dissolution–precipitation in a fracture network. The experiments were conducted in micromodels made of natural rocks with a comb-shaped flow channel to mimic a fracture network. This enabled studying the effect of injection rate on coupled dissolution–precipitation in advection and diffusion-dominated flow paths. We used gypsum carbonation as an analog reaction to allow for realistic experimental time frames due to its rapid reaction kinetics. The experimental work is coupled with high-fidelity numerical simulations to enhance our understanding of the parameters affecting the mineralization reaction. Our results demonstrate the importance of flow rate on the rate and nature of the gypsum carbonation reaction revealing that higher flow rates enable deeper penetration of the mineral precipitation front into the dead-end channels. This is an important finding since for sustained mineralization in a fracture network, precipitation in dead-ends while still allowing for flowing fractures is critical. Detailed characterization of the precipitates showed that lower flow rates led to porous and loose precipitates in the form of aragonite while higher flow rates mimicked supersaturation behavior leading to the formation of calcite. The reactive transport simulations further demonstrated the significance of flow velocity in advection-dominated channels to influence the efficiency of carbon mineralization in diffusion-dominated channels, potentially clogging of dead-end channels. These findings highlight the need for coupling chemical, mechanical, and hydrodynamic processes to evaluate the nature and extent of carbon mineralization in fractured media critical for permanent storage in mafic and ultramafic formations. This research further highlights the need for more investigation in potential subsurface fracture generation techniques to aid carbon mineralization.

25 ENERGY STORAGE↗
DOE OSTI2020

An Integrated Multiscale Experimental-Numerical Analysis on Reconsolidation of Salt-Clay Mixture for Disposal of Heat-Generating Waste (Final NEUP Technical Report)

The overall purpose of this research is to improve understanding of THMC coupling effect on the reconsolidation of granular (or crushed) salt-clay mixture used for seal systems of shafts and drifts in salt repositories. This proposed work is partially motivated by the recent work on the Waste Isolation Pilot Plant (WIPP) that shows the promising sealing capability of clay-salt mixture compared to crushed salt. In particular, primary emphasis is to develop a fully integrated multiscale experiment-numerical study to determine and explain what leads to the superior sealing ability of the clay-salt mixture. These research activities are designed to seek further understanding of (1) why clay additives may enhance the fluid trapping and (2) whether this flow barrier effect may prevail under different combinations of temperature, confining pressure, deviatoric stress and other foreseeable environmental factors. If successful, this enhanced flow trapping ability of the seal provides significant improvement to the seal and repository performance and therefore make the repository safer in the long-term. The experiment component includes microstructural investigation and macroscopic tests on a reconsolidated salt-clay mixture. In the microstructural study, the goal is to (1) characterize microscopic distributions of distinct phases (e.g., clay, salt crystal boundaries, trapped brine, and pore) to examine the connectivity of the pore network inside the salt-clay mixture with different amounts of clay additive and moisture content and (2) analyze multiscale imaging data to reconstruct the polycrystalline microstructures for numerical simulations. Meanwhile, macroscopic tests are performed to analyze how clay alters the failure/creep mechanisms in the salt-clay mixture. Microscopic and macroscopic experimental observations will both be used to calibrate and validate a multiscale model that explicitly simulates the capillary and multiphase flow in the connected pores and the deformation due to the presence of intra-crystalline brine at the pore scale via a new polyhedral discrete element–lattice Boltzmann method (DEM-LBM) coupling model. The pore-scale simulations are homogenized via an upscaling procedure that converts pore-scale information (e.g. force exerted on grain boundary, sliding, pressure-solution) to continuum measures (e.g. Cauchy stress, Darcy’s flow) at each integration point in the macroscopic multiphase TMHC model. This multiscale scheme will allow coupling be- tween high-fidelity simulations of brine-salt-clay interaction and the macroscopic TMHC model. The multiscale model helps the understanding of how the trapped brine inclusion affects the pressure-solution mechanism with the presence of clay and moisture. This work brings new insight into the sealing capacity of salt-clay mixture under elevated temperature over a long period of time - a key to evaluating the potential of salt-clay mixture usage for salt repositories.

42 ENGINEERING↗
DOE OSTI2026

Hydrological and Thermal Dynamics of a Supra‐Permafrost Subterranean Estuary

Subterranean estuaries (STEs), where groundwater interacts with seawater, influence surface and subsurface coastal ecology and biogeochemistry. In Arctic-STEs overlying permafrost, groundwater flow and heat transport determine the fate of organic matter. Yet, direct observations of groundwater flow and heat and solute transport processes in Arctic STEs remain limited. This study characterized groundwater flow paths and fluxes and heat transport within an Arctic-STE along Alaska's Beaufort Sea coast during thawing, summer, and freeze-up. Intertidal seabed temperature-depth profiles collected along a 10-m transect captured the active groundwater flow period, from thaw and flow onset in mid-June to freeze-up in late-September. During this period, aquifer geometry evolved non-uniformly due to spatially varying thaw rates across the STE (mean (m) thaw depths–beach: 0.25 to 0.55–0.6 m on 20 June, 25 July, 1 October; seabed: 0.6–0.9 m from 25 July to 1 October). Groundwater and surface water levels, salinity, and subsurface temperature profiles measured over tidal time scales were interpreted alongside groundwater flow-heat transport numerical simulations. Fresh groundwater discharge was sporadic during thawing (m: 0.32 m 3 /day/m), abundant in summer (m: 0.45 m 3 /day/m), and was largely absent during freeze-up. During freeze-up, groundwater flow was driven exclusively by seawater recirculation via tidal pumping (from thawing to summer to freeze-up: 0.00025–0.15–0.5 m3/day/m) and convection. Heat advection dominated near aquatic interfaces (shaping intertidal ice), and conduction controlled vertical temperature gradients in low-flow and unsaturated sediments. These findings will help predict how prolonged summers will alter Arctic-STE cryo-hydrology and biogeochemistry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Formation of wide-blocky calcite veins by extreme growth competition

Liassic limestones on the coast of Somerset in the UK contain dense arrays of calcite microveins with a common, but poorly understood microstructure, characterized by laterally wide crystals that form bridges across the vein. We investigated the mechanisms of formation and evolution of these ‘wide-blocky’ vein microstructures using a combination of high-resolution analytical methods, including virtual petrography, optical cathodoluminescence and scanning electron microscopy techniques (e.g. energy-dispersive X-ray spectrometry, back-scattered electron imaging, cathodoluminescence and electron back-scattered diffraction), laboratory experiments and multiphase field modelling. Our results indicate that the studied veins formed in open, fluid-filled fractures, each in a single opening and sealing episode. As shown by the optical and electron back-scattered diffraction images, the vein crystals grew epitaxially on grains of the wall rock and we hypothesize that their growth rates differed depending on whether the crystals were on a wall rock grain substrate that fractured intergranularly (slow growth rates) or transgranularly (rapid growth rates). Our multiphase field models support this hypothesis, showing that wide, blocky crystals only form where there are significant differences in the growth rate and are dependent on the type of seed grain. These results provide strong evidence for extreme growth competition, a process that we propose controls vein-filling in many micritic carbonate reservoirs, as well as demonstrate that the characteristics of the fracture wall can affect the filling processes in syntaxial veins. Supplementary material: The description and images of the studied thin sections are available at https://doi.org/10.6084/m9.figshare.c.5172371 . High-resolution optical microscopy mosaics (under plane-polarized- and crossed polarized light) of the thin section collection in PetroScan file format are available on request from the authors.

Geology↗
DOE OSTI2025

Transmission electron microscopy with in-situ ion irradiation: Facilities and community

Whilst there is a clear scientific and technological need for the technical capabilities of transmission electron microscopes with in-situ ion irradiation, it also requires a collaborative community of international researchers to support such facilities in successfully meeting this demand. Instruments of this type serve to provide fundamental understanding of the mechanisms which drive changes in materials important to nuclear fission and fusion energy, the semiconductor industry, quantum information systems, space travel, astronomy, geology and many more applications. As these areas continue to evolve and the instrumentation possibilities expand, the capacity of in-situ ion irradiation facilities must also develop hand-in-hand with the user community to deliver an ever-greater diversity of high-fidelity extreme-environment experimentation. Future directions for the field, such as miniaturization from MEMS/microfluidic devices and advanced controls with ML-based analysis, continuously emerge to advance both the hardware and software which support the coupling of TEMs with ion beams. This review sets out to provide up-to-date insights into the community and advancement of current, and development of future, facilities which have the potential to further unlock access to the nanoscale exploration of coupled extreme environments crucial to many of the important science and engineering challenges we face today.

In-situ irradiation↗
DOE OSTI2024

Characterizing the Atmospheric Mn Cycle and Its Impact on Terrestrial Biogeochemistry

Abstract The role of manganese (Mn) in ecosystem carbon (C) biogeochemical cycling is gaining increasing attention. While soil Mn is mainly derived from bedrock, atmospheric deposition could be a major source of Mn to surface soils, with implications for soil C cycling. However, quantification of the atmospheric Mn cycle, which comprises emissions from natural (desert dust, sea salts, volcanoes, primary biogenic particles, and wildfires) and anthropogenic sources (e.g., industrialization and land‐use change due to agriculture), transport, and deposition, remains uncertain. Here, we use compiled emission data sets for each identified source to model and quantify the atmospheric Mn cycle by combining an atmospheric model and in situ atmospheric concentration measurements. We estimated global emissions of atmospheric Mn in aerosols (<10 μm in aerodynamic diameter) to be 1,400 Gg Mn year −1 . Approximately 31% of the emissions come from anthropogenic sources. Deposition of the anthropogenic Mn shortened Mn “pseudo” turnover times in 1‐m‐thick surface soils (ranging from 1,000 to over 10,000,000 years) by 1–2 orders of magnitude in industrialized regions. Such anthropogenic Mn inputs boosted the Mn‐to‐N ratio of the atmospheric deposition in non‐desert dominated regions (between 5 × 10 −5 and 0.02) across industrialized areas, but that was still lower than soil Mn‐to‐N ratio by 1–3 orders of magnitude. Correlation analysis revealed a negative relationship between Mn deposition and topsoil C density across temperate and (sub)tropical forests, consisting with atmospheric Mn deposition enhancing carbon respiration as seen in in situ biogeochemical studies.

Environmental Sciences & Ecology↗
NASA NTRS1997

Dissecting global diversity patterns: examples from the Ordovician Radiation

Although the history of life has been characterized by intermittent episodes of radiation that can be recognized in global compilations of biodiversity, it does not necessarily follow that these episodes are caused by processes that occurred uniformly around the world. Major diversity increases could be generated by the cumulative effects of different mechanisms operating simultaneously at several geographic or environmental scales. The purpose of this review is to describe ongoing research on the manifestations, at several scales, of the Ordovician Radiation, which was among the most extensive intervals of diversification in the history of life. Through much of the period, diversity was concentrated most heavily near regions of active mountain building and volcanism; differences in diversity patterns from continent to continent, and among regions within continents, reflect this overprint. While this suggests a linkage of the Radiation and tectonic activity, this is by no means the only mediating agent. Outcrop-based research in North America has demonstrated that tectonic activity was detrimental to some biotic elements, in contrast to its effects on other organisms. Moreover, in the Great Basin of North America where the local stratigraphic record is of particularly high quality, biotic transitions characteristic of the period occurred far more rapidly than observed in global compilations of diversity, suggesting that the global rate of transition may represent the aggregate sum of transitions that occurred abruptly, but at different times, around the world. Finally, it has been demonstrated that, in concert with an increase in average age, the environmental and geographic ranges of Ordovician genera both increased significantly through the period, indicating a role for intrinsic factors in producing Ordovician biotic patterns.

Non-NASA Center↗
DOE OSTI2024

Controls on Stable Methane Isotope Values in Northern Peatlands and Potential Shifts in Values Under Permafrost Thaw Scenarios

Abstract Northern peatlands are a globally significant source of methane (CH 4 ), and emissions are projected to increase due to warming and permafrost loss. Understanding the microbial mechanisms behind patterns in CH 4 production in peatlands will be key to predicting annual emissions changes, with stable carbon isotopes (δ 13 C‐CH 4 ) being a powerful tool for characterizing these drivers. Given that δ 13 C‐CH 4 is used in top‐down atmospheric inversion models to partition sources, our ability to model CH 4 production pathways and associated δ 13 C‐CH 4 values is critical. We sought to characterize the role of environmental conditions, including hydrologic and vegetation patterns associated with permafrost thaw, on δ 13 C‐CH 4 values from high‐latitude peatlands. We measured porewater and emitted CH 4 stable isotopes, pH, and vegetation composition from five boreal‐Arctic peatlands. Porewater δ 13 C‐CH 4 was strongly associated with peatland type, with δ 13 C enriched values obtained from more minerotrophic fens (−61.2 ± 9.1‰) compared to permafrost‐free bogs (−74.1 ± 9.4‰) and raised permafrost bogs (−81.6 ± 11.5‰). Variation in porewater δ 13 C‐CH 4 was best explained by sedge cover, CH 4 concentration, and the interactive effect of peatland type and pH (r 2 = 0.50,p < 0.001). Emitted δ 13 C‐CH 4 varied greatly but was positively correlated with porewater δ 13 C‐CH 4 . We calculated a mixed atmospheric δ 13 C‐CH 4 value for northern peatlands of −65.3 ± 7‰ and show that this value is more sensitive to landscape drying than wetting under permafrost thaw scenarios. Our results suggest northern peatland δ 13 C‐CH 4 values are likely to shift in the future which has important implications for source partitioning in atmospheric inversion models.

Environmental Sciences & Ecology↗