Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geologic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Experimental evaluation of the role of redox during glauconite-CO 2 -brine interactions

Greensands formations are globally abundant sedimentary rocks rich in Fe clays (typically glauconite) that commonly contain natural hydrocarbon accumulations and may be important reservoirs for geologic storage of anthropogenic CO 2 . Diagenesis in greensands is commonly accompanied by the conversion of primary glauconite to siderite (FeCO 3 ), a process that could be exploited for the permanent trapping of CO 2 . Importantly, siderite formation after glauconite requires that the mostly oxidized Fe in the primary Fe clay minerals is reduced during diagenetic interactions. Here, we explore the effect of solution redox state on the stability of glauconite in sandstones with implications for the diagenetic and/or engineered formation of siderite. We performed two flow-through experiments on intact, glauconite-rich sandstone cores at 150 °C and 150 bar. Both experiments employed a 1 mol NaCl/kg, 0.1 mol NaHCO 3 /kg solution charged with ~0.58 mol CO 2 /kg solution, but the redox state of the injected fluid was manipulated between experiments in order to compare glauconite reactivity and siderite saturation state at oxidizing and reducing end-member conditions. After reaction with the oxidizing (O 2 (aq) ≈ 6 μmol/kg) fluid, chemical and Mӧssbauer spectroscopic analyses indicate the production of Fe(III)-oxy/hydroxide minerals from glauconite, whereas, in the reducing (H 2 (aq) ≈ 5–40 mmol/kg) experiment, thermodynamic calculations and coupled chemical, mineralogical, and Mӧssbauer analyses suggest glauconite dissolution and precipitation of an Fe(II) mineral, likely siderite, and minor magnetite formation. These experimental results, along with thermodynamic calculations, confirm that solution redox state is the master variable dictating siderite formation in greensands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The impact of mineral reactive surface area variation on simulated mineral reactions and reaction rates

Reactive transport modeling is an essential tool to simulate complex geochemical reactions in porous media that can impact formation properties including porosity and permeability. However, simulating these reactions is challenging due to uncertainties in model parameters, particularly mineral surface areas. Imaging has emerged as a powerful means of estimating model parameters including porosity and mineral abundance, accessibility and accessible surface area. However, these parameters, particularly mineral accessible surface area, vary with image resolution. This work aims to enhance understanding of the impact of image resolution and other means of estimating mineral reactive surface area on simulated mineral reactions and reaction rates. Mineral surface areas calculated from images with resolutions of 0.34 μm and 5.71 μm were used to simulate mineral reactions in the context of geologic CO 2 sequestration in the Paluxy formation at the continuum scale. Additional simulations were carried out using BET surface areas collected from the literature and geometric surface areas. Simulations were run for 7300 days and mineral volume fractions and effluent ion concentrations tracked and compared. Variations in mineral surface areas measured from images are within 1 order of magnitude and yield similar simulation results, indicating the impact of image resolution on simulated reactions and reaction rates is minimum for the resolutions and sample considered. In comparison, surface areas obtained from BET and geometric approaches are 1–4 orders of magnitude higher than image-obtained surface areas and result in greater simulated reaction rates and extents. Minerals with high reaction rates (calcite and siderite) are most impacted by surface area values at short times where simulated mineral volume fractions at longer times agree relatively well, even for simulations with several orders of magnitude variation in surface area. Phases with lower reaction rates, such as K-feldspar and muscovite, are predominantly impacted over longer times where variations in surface areas impact reaction extents and porosity evolution. Overall, variations in surface areas due to image resolution are small and result in little variation in simulated reactions and reaction rates while there are significant variations in simulation results when other surface area estimates are used. These variations, however, depend on the reactivity of the mineral phase where surface areas of fast-reacting phases largely impact simulations at short (hours to days) timescales and surface areas of slower-reactive phases impact longer term simulations (years).

58 GEOSCIENCES↗
DOE OSTI2023

A chemistry-informed hybrid machine learning approach to predict metal adsorption onto mineral surfaces

Historically, surface complexation model (SCM) constants and distribution coefficients (K d ) have been employed to quantify mineral-based retardation effects controlling the fate of metals in subsurface geologic systems. Our recent SCM development workflow, based on the Lawrence Livermore National Laboratory Surface Complexation/Ion Exchange (L-SCIE) database, illustrated a community FAIR data approach to SCM development by predicting uranium(VI)-quartz adsorption for a large number of literature-mined data. Here, we present an alternative hybrid machine learning (ML) approach that shows promise in achieving equivalent high-quality predictions compared to traditional surface complexation models. At its core, the hybrid random forest (RF) ML approach is motivated by the proliferation of incongruent SCMs in the literature that limit their applicability in reactive transport models. Our hybrid ML approach implements PHREEQC-based aqueous speciation calculations; values from these simulations are automatically used as input features for a random forest (RF) algorithm to quantify adsorption and avoid SCM modeling constraints entirely. Named the LLNL Speciation Updated Random Forest (L-SURF) model, this hybrid approach is shown to have applicability to U(VI) sorption cases driven by both ion-exchange and surface complexation, as is shown for quartz and montmorillonite cases. The approach can be applied to reactive transport modeling and may provide an alternative to the costly development of self-consistent SCM reaction databases.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Wellbore cement alteration and roles of CO 2 and shale during underground hydrogen storage

To mitigate climate change and adopt renewable energy, energy storage is crucial and can be done in the form of hydrogen gas (H 2 ). Subsurface geologic reservoirs are positioned to store H 2 on the largest scales for the longest terms of all potential options. However, H 2 injection may boost reactions that consume hydrogen, generate undesired gases, and alter pore structures of geomedia. To explore the extent of H 2 -associated biotic reactions at a near wellbore location, four experiments were conducted under underground storage conditions with wellbore cement cores and, in most instances, shale samples submerged in synthetic formation brine. Post-reaction gas, aqueous, and solid phase samples were analyzed using olfactory screening and, later, gas chromatography (GC-MS), inductively coupled plasma optical emission spectroscopy (ICP-OES), scanning electron microscopy (SEM), and synchrotron micro-scale x-ray fluorescence (μ-XRF). Within a period of 16 weeks, hydrogen sulfide (H 2 S) was generated in systems containing both H 2 and shale. XRF mapping identified a zone enriched in iron(II) and reduced sulfur along the rim of cement cross sections that was largely associated with CO 2 -induced cement carbonation. Shale did not show noticeable alteration, but there is evidence it contributed to the initial inoculation of the system and provided nutrients for microbes via water-rock interactions. Here, this study considers both rock formations and wellbore cement not previously evaluated concurrently. Findings support understanding and modeling of H 2 -associated biogeochemical reactions during underground hydrogen storage.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Permeate fluxes from desalination of brines and produced waters: A reactive transport modeling study

The increasing interest in the use of membrane systems to desalinate inland brackish water, agricultural drainage, and industrially produced wastewater demands improved means of predicting desalination system performance under variable feedwater compositions. The interaction among water flow, solute transport, and chemical composition in these systems impacts permeate flux evolution. Here, an established multicomponent reactive transport simulator that accounts for these coupled processes is applied to compute osmotic pressure and permeate fluxes in reverse osmosis (RO) systems. The model is first validated by predicting permeate fluxes for a set of benchtop crossflow experiments subject to a range of feed flow rates and compositions, under fouling and non-fouling conditions. Results compare favorably with measured data that show that solutions with similar total dissolved solids concentrations but different compositions result in different permeate fluxes. The model is then applied to predict permeate fluxes from the desalination of produced waters using a commercial spiral wound RO module. For NaCl-dominant brines, at total dissolved salt concentrations (TDS) below about 70 g/L, permeate fluxes are inversely proportional to water mole fraction as the latter is a reasonable approximation of water activity (i.e. ideal mixing). In the case of Ca–Cl-, Na–CO3- and Na–SO4-dominant brines below about 70 g/L TDS, this relationship does not hold as well and tends to overpredict osmotic pressure and thus underpredict permeate fluxes. However, the opposite becomes true at higher TDS values for typical produced waters. The scaling potential of these waters is also computed by allowing the precipitation of minerals above their saturation limit on the RO membrane. This work demonstrates how reactive transport models developed for the analysis of waters from geological systems can be extended to improve process design, optimization, and control in desalination systems from produced waters and beyond.

Molins, Sergi↗
DOE OSTI2022

Paw-Net: Stacking ensemble deep learning for segmenting scanning electron microscopy images of fine-grained shale samples

Segmentation of scanning electron microscopy (SEM) images is critical yet time-consuming for geological analyses, as it needs to differentiate the boundaries for different mineral objects to facilitate subsequent analyses, such as porosity calculation. Recently, various machine learning methods, especially convolutional neural networks (CNNs), have been explored to segment SEM images of fine-grained shale samples. However, we found that general CNNs do not yield optimal performance due to insufficient training data and imbalanced objects in SEM images. This work has revised the U-Net architecture, a popular approach for biomedical image analyses, by incorporating a loss function that addresses the imbalance issue. Furthermore, we used the ensemble learning method to train multiple models and combined the results to improve the overall performance of segmentation. We prepared 2162 sub-images from raw SEM images in our experiments and divided them into training, validation, and testing datasets. The overall results show that our method improves the average Intersection over Union (IOU) of mineral objects from 0.49 to 0.58, compared to the original U-Net model. Our method can clearly distinguish each object from others with boundaries, even in highly imbalanced images. Training our models takes less than three minutes using a single GPU, while manual labeling can take up to three hours for each image. Furthermore, the method helps geoscientists gain insights quickly and effectively by building neural network models from a small dataset of SEM images.

58 GEOSCIENCES↗
DOE OSTI2023

Mitigation of spatial nonstationarity with vision transformers

Spatial nonstationarity, the location variance of features’ statistical distributions, is ubiquitous in many natural settings. For example, in geological reservoirs rock matrix porosity varies vertically due to geomechanical compaction trends, in mineral deposits grades vary due to sedimentation and concentration processes, in hydrology rainfall varies due to the atmosphere and topography interactions, and in metallurgy crystalline structures vary due to differential cooling. Conventional geostatistical modeling workflows rely on the assumption of stationarity to be able to model spatial features for geostatistical inference. Nevertheless, this is often not a realistic assumption when dealing with nonstationary spatial data and this has motivated a variety of nonstationary spatial modeling workflows such as trend and residual decomposition, cosimulation with secondary features, and spatial segmentation and independent modeling over stationary subdomains. The advent of deep learning technologies has enabled new workflows for modeling spatial relationships. However, there is a paucity of demonstrated best practice and general guidance on mitigation of spatial nonstationarity with deep learning in the geospatial context. We demonstrate the impact of two common types of geostatistical spatial nonstationarity on deep learning model prediction performance and propose the mitigation of such impacts using self-attention (vision transformer) models. We demonstrate the utility of vision transformers for the mitigation of nonstationarity with relative errors as low as 10%, exceeding the performance of alternative deep learning methods such as convolutional neural networks. We establish best practice by demonstrating the ability of self-attention networks for modeling large-scale spatial relationships in the presence of commonly observed geospatial nonstationarity.

58 GEOSCIENCES↗
DOE OSTI2024

PYSIMFRAC: A Python library for synthetic fracture generation and analysis

In this paper, we introduce PYSIMFRAC, an open-source python library for generating 3-D synthetic fracture realizations, integrating with fluid simulators, and performing analysis. PYSIMFRAC allows the user to specify one of three fracture generation techniques (Box, Gaussian, or Spectral) and perform statistical analysis including the autocorrelation, moments, and probability density functions of the fracture surfaces and aperture. This analysis and accessibility of a python library allows the user to create realistic fracture realizations and vary properties of interest. In addition, PYSIMFRAC includes integration examples to two different pore-scale simulators and the discrete fracture network simulator, dfnWorks. The capabilities developed in this work provides opportunity for quick and smooth adoption and implementation by the wider scientific community for accurate characterization of fluid transport in geologic media. We present PYSIMFRAC along with integration examples and discuss the ability to extend PYSIMFRAC from a single complex fracture to complex fracture networks.

58 GEOSCIENCES↗
DOE OSTI2024

Roles of kaolinite-oil-gas molecular interactions in hydrogen storage within depleted reservoirs

Hydrogen is a clean alternative to fossil fuels, emitting only water vapor during combustion. In a future hydrogen economy, large-scale storage will be an important component of the supply chain. Due to its low volumetric density, conventional surface storage methods are inadequate. Underground hydrogen storage (UHS) offers a viable solution, enabling the storage of millions of cubic meters. Among potential geological sites, including salt caverns, aquifers, and depleted gas reservoirs, depleted oil reservoirs show promise. Studying hydrogen interactions with residual oil and reservoir minerals is vital for understanding the properties of hydrogen and the reservoir post-injection. In this work, we employed molecular dynamics simulations to gain molecular-level insights into these interactions. We investigated hydrogen dissolution in oil, adsorption at kaolinite/oil interfaces, the role of CO 2 as a cushion gas, and the influence of kaolinite’s hydrophobicity on H 2 behavior. The main findings include: (1) hydrogen dissolves more in oil than in water, (2) the introduction of CO 2 suppresses hydrogen dissolution in oil and reduces the interfacial tension (IFT) between oil and gas, (3) CO 2 decreases H 2 partitioning near kaolinite surfaces due to its strong affinity for the hydrophilic gibbsite surface of kaolinite, and (4) CO 2 is more effective than H 2 in reducing IFT between kaolinite and the oil–gas mixture. These findings emphasize the effectiveness of CO 2 as a cushion gas and the important role of clay hydrophobicity in UHS, providing insights that are challenging to obtain experimentally.

08 HYDROGEN↗
DOE OSTI2025

Influence of extreme temperature conditions on CO 2 direct air capture using amino-acid solutions

Geological features play a pivotal role in determining the feasibility of deploying CO₂ direct air capture (DAC) technologies, primarily because they influence the availability of cost-effective energy sources, such as natural gas and geothermal energy, and also due to the potential for CO₂ sequestration. Many regions face challenges due to variable weather conditions including seasonal temperature fluctuations, high or low humidity, and sub-ambient temperatures. These extremes can reduce DAC performance or even lead to catastrophic events. Aqueous solvents considered for DAC systems are particularly vulnerable to seasonal variations in colder climates, where the solvent may underperform or freeze. It is therefore essential to investigate the CO₂ capture efficiency of aqueous solvents across a broad range of environmental temperatures, spanning sub-zero to hot conditions (>30 °C). In this study, DAC operation is examined using a high-flux solvent–air crossflow contactor under two major weather scenarios: (i) cold conditions below 0 °C and (ii) hot conditions above 30 °C. A parametric study is conducted to investigate the contactor performance regarding CO₂ removal efficiency, uptake capacity, and reaction kinetics versus temperature when the air velocity through the contactor exceeds 1 m/s. The efficacy of the contactor is systematically investigated using various anti-freeze amino-acid solvent formulations. A mass-transfer mechanistic model is developed to assess the process performance over a wide temperature range and propose scalable design guidelines. Machine learning is also employed to identify key parameters affecting the CO₂ capture efficiency. It is shown that air velocity and temperature are the primary factors influencing CO₂ uptake. Based on performance data obtained under subfreezing temperatures, a technoeconomic analysis is conducted to evaluate the feasibility of using aqueous solvents in seasonal cold regions. In conclusion, the findings of this study provide valuable insights into siting considerations for deploying solvent-based DAC, thereby contributing to the advancement of sustainable carbon removal solutions.

Air–liquid contactor↗
DOE OSTI2020

Shifting modes of iron sulfidization at the onset of OAE-2 drive regional shifts in pyrite δ 34 S records

We report total reduced inorganic S isotope ratios (δ 34 S CRS ) shift toward more negative values across much of the southern North Atlantic just before the onset of the Cenomanian-Turonian Ocean Anoxic Event (OAE-2). At the same time, there is no parallel isotopic change in the significantly larger pool of kerogen (organic) S, which indicates that the distribution and S-isotope composition of sulfide in the environment likely did not drive the change in δ 34 S CRS . Here, we investigate possible explanations for the negative shift in δ 34 S CRS values and their divergence from organic S by isolating iron sulfides for morphological identification and grain-specific isotopic analysis using secondary ion mass spectrometry (SIMS). In pre- and syn-OAE-2 sedimentary rocks from Demerara Rise, we find four distinct morphologies of iron sulfides: pyrite framboids (1–20 μm diameter), irregular pyrite aggregates (1–38 μm diameter), large cemented pyrite aggregates (~60 μm diameter), and irregular and cemented aggregates of the pyrite polymorph marcasite (1–45 μm diameter). These different textural groups have distinct S-isotopic compositions that are largely consistent through the onset of OAE-2. As such, the secular change in bulk δ 34 S CRS values likely reflects the changing proportions of these phases stratigraphically across OAE-2. All textural groups feature resolvable intra-grain δ 34 S variability, suggesting that the environments in which they formed were characterized by dynamic sulfide δ 34 S values and/or by partial closed-system distillation. We use grain-specific δ 34 S distributions to rule out shoaling of the chemocline within the sediments as a mechanism for the observed decrease in δ 34 S CRS . Instead, we propose that changes in the reactivity of the iron species delivered to Demerara Rise over the ~200 kyr leading up to the onset of OAE-2 impacted the relative contributions of pyrite with S-isotope signatures reflecting the water column, shallow sediments, and deeper sediments to the bulk sedimentary δ 34 S CRS value. Specifically, the change in iron reactivity at the onset of OAE-2 favored the production of 34 S-depleted large, cemented aggregates and framboids at the expense of more 34 S-enriched irregular aggregates. Our results underscore that bulk δ 34 S CRS measurements integrate multiple reduced phases that form via distinct reaction mechanisms and potentially in different parts of the depositional environment. Grain-specific SIMS analyses dramatically enrich our ability to interpret pyrite isotopic patterns in the geologic record.

58 GEOSCIENCES↗
DOE OSTI2021

Comparative geochemistry of flowback chemistry from the Utica/Point Pleasant and Marcellus formations

Flowback/Produced fluid samples were collected from several wells from two Utica/Point Pleasant (UPP) sites (UPPW and UPPS) in Ohio, and one Marcellus (Marcellus Shale Energy and Environment Laboratory (MSEEL)) site in West Virginia over a period of approximately two years. Although these formations have different ages, depositional environments, diagenetic histories, and geochemical and mineralogical compositions (i.e. the UPP is significantly more carbonate rich than the Marcellus which is more siliceous), analysis of trends in fluid species over time shows that, overall, the TDS and major solubilized elements (Na, Ca, Cl) in the UPP and Marcellus brines are remarkably similar. Total dissolved solutes (TDS) in these brines ranged from approximately 40 to 250 g/L salt, and in general, concentrations increased with time elapsed since natural gas well completion and stimulation. The behavior of Na, Br, and Cl suggests that the produced water signatures from these formations are largely derived from the native formational brines which display evidence of originating from evaporated seawater. There is a strong correlation between Cl and Br, indicating that both species behave conservatively, and the similarity among each of these brines suggests no appreciable contribution of salt from halite dissolution because Br is excluded from the halite structure. Cl/Br ratios in the brines range from ~80 to 120 (mg/L/mg/L). Other elements, such as K, which readily reacts between fluids and ion exchange sites on clays, generally exhibit conservative behavior for an individual site, but show significant variations among each of the different well pads. The concentrations of Sr and Ba vary dramatically among well sites, and increase with respect to Cl- over time, suggesting increasing solubilization, presumably from desorption from clay minerals or dissolution of carbonates or sulfates from the source formation(s). The UPPW well site has very low Ba due to high-sulfate input fluid, which resulted in precipitation of barite/celestite in the brines. In contrast the UPPS well site had elevated Sr (~ 3500 mg/L), presumably due to the use of Sr-rich recycled brine used in hydraulic fracturing. The Marcellus site had the highest Ba concentrations (up to 10 g/L) and highest Ba/Sr ratios in the fluids, due to the high concentration of barium in the Marcellus target (~ 1000 ppm, as compared to ~200 ppm in the UPP). These observations suggest that solutes in the FP fluids are derived from native brines, water-rock interactions that have occurred over geologic time scales, as well as some contribution from contemporaneous reactions in the subsurface. The results also show that the composition of the injected fluid can influence flowback fluid chemistry and possibly production efficiency.

58 GEOSCIENCES↗
DOE OSTI2022

Iron precipitation under controlled oxygen flow: Mineralogical implications for BIF precursors in the Archean ocean

Banded iron formation (BIF) deposition in the Archean ocean is thought to have been initiated by the oxidation of dissolved iron into ferric primary precursor phases that descended through the water column and were deposited on the seafloor. Effective interpretation of the trace element and isotopic composition of BIFs in the geologic record requires an understanding of the identity and longevity of those precursor phases. Temporal and spatial variation in oxidant concentration and ocean chemistry may have driven precursor mineralogy. Furthermore, precursor phases may undergo transitions during descent and burial. This experimental study follows the evolution of iron mineralogy, speciation, and redox state during the precipitation of iron under variable oxygen fluxes and in fluids containing different iron-complexing anions (chloride, sulfate, and phosphate). Additionally, suspensions collected after incomplete oxidation were anoxically aged to simulate changes to precursor mineralogy during descent below the seawater redoxcline. Results from X-ray diffraction, sequential dissolution, colorimetric determination of Fe redox state, and Fe K-edge X-ray absorption fine structure spectroscopy showed that under all experimental conditions, intermediate precipitates collected before complete iron uptake contained mineralized ferrous iron. Purely ferric mineral assemblages were not observed until iron was removed from solution. In low-oxygen experiments, intermediate precipitates contained phases with stoichiometric Fe 2+ , including magnetite, vivianite, and green rust (GR). Chloride green rust (GR1) had more ferric iron than sulfate green rust (GR2) and more readily transitioned to magnetite via disproportionation. GR2 was stable over a broader range of iron uptake; magnetite appeared mainly as an additional oxidation product in sulfate solution. In high oxygen experiments, mineralized ferrous iron occurred in amorphous phases or as a non-stoichiometric component in ferric oxides; final ferric assemblages were less crystalline than in low-oxygen equivalents. Low concentrations of phosphate increased the total iron oxidation rate, but also increased the ferrous content of intermediate precipitates. The incorporation of phosphate stabilized GR2 and facilitated GR2 precipitation over a larger range of iron uptake. In higher concentrations of phosphate, vivianite and poorly crystalline ferric hydroxides formed in place of GR. Here, these findings suggest that over a range of possible ocean chemistries, mixed-valence phases may have been short lived but relevant precursors to BIF. Additionally, anionic chemistry and oxidant concentration are shown to influence the crystallinity and chemical resistivity of final ferric assemblages, affecting their reactivity during later anoxic burial.

58 GEOSCIENCES↗
DOE OSTI2024

Geochemical-hydromechanical couplings during water-serpentinized harzburgite interactions at 20° C and 30 bars

Interaction of groundwater with the serpentinized harzburgites of the upper mantle plays an important role in the geologic carbon cycle and serpentinization processes. Here, in this study, an intact serpentinized harzburgite with more than 60% lizardite from the Semail ophiolite in Oman was reacted with water at near neutral pH and low PCO 2 to observe its dissolution behavior and reaction path within the CaO-MgO-SiO 2 -CO 2 -H 2 O system at 20 °C and 30 bars. In the experiment, mass (i.e. H 2 O, ions) transfer is by diffusion and the selected temperature and pressure conditions mimic water-rock interactions at the shallow portions of most ultramafic rock hosted aquifers. Equilibrium activity-activity diagrams and thermodynamic data were used to compare the experimentally determined reaction path with the theoretical stability boundaries for minerals involved to investigate the evolution of bulk chemical composition, mineralogy, and water composition. The experiments demonstrated that (i) the water-rock interactions increased the pH of the aqueous phase from 5.9 to 7.5 over a period of 18 weeks; (ii) the dissolution of lizardite, orthopyroxene (enstatite), and clinopyroxene (diopside and augite) increased the concentration of Mg, Ca, and Si in the aqueous phase; (iii) the dissolution was incongruent with respect to Mg and Si, favoring Si release at pH > 6 due to (a) breaking of more reactive cation‑oxygen bonds that is consistent with the stoichiometry of magnesium for proton exchange reaction which favors a surface that is enriched in Mg at basic conditions, and (b) preferential dissolution of clinopyroxene Mg 1.30 Ca 0.52 Fe 0.06 Si 2 O 6 ; (iv) the aqueous phase was undersaturated with respect to carbonate (e.g. calcite, magnesite, and hydromagnesite) and hydrous (e.g. lizardite, chrysotile, brucite, and talc) minerals; (v) the bulk chemical composition and mineralogy of the intact serpentinized harzburgite matrix did not change; (vi) the thermodynamic data can successfully predict water-intact serpentinized harzburgite behavior if the water chemical composition can be constrained; and (vii) no detectable macroscopic form of damage (e.g. microcracks forming as a result of differential stress fields due to changes in volume during chemical reaction) was observed.

Carbonation↗
DOE OSTI2024

Validating the rhenium proxy for rock organic carbon oxidation using weathering profiles

Chemical weathering over geological timescales acts as a source or sink of atmospheric carbon dioxide (CO 2 ), while influencing long-term redox cycling and atmospheric oxygen (O 2 ) at Earth's surface. There is a growing recognition that the oxidative weathering of rock organic carbon (OC petro ) can release more CO 2 than is locally drawn down by silicate weathering, and may vary due to changes in erosion and climate. The element rhenium (Re) has emerged as a proxy to track the oxidative weathering of OC petro , yet uncertainties in its application remain namely that we lack a systematic assessment of the comparative mobility of Re and OC petro during sedimentary rock weathering. Here we measure Re and OC petro loss across gradients in rock weathering at 9 global sites, spanning a range of initial OC petro values from ~0.2 % to >10 %. We use titanium to account for volume changes during weathering and assess Re and OC petro loss alongside major elements that reflect silicate (Na, Mg), carbonate (Ca, Mg) and sulfide (S) weathering. Across the dataset, Re loss is correlated with OC petro loss but not with loss of any other major element. Further, across the weathering profiles, the average molar ratio of OC petro to Re loss was 0.84 ± 0.15, with 8 out of 9 sites having a ratio >0.74. At one site (Marcellus Shale), the average ratio was lower at 0.58 ± 0.11. The excess loss of Re matches expectations that, typically, between ~0 and 20 % of the Re liberated by sedimentary rock weathering derives from silicate or sulfide phases, while some OC petro may be physically or chemically protected from weathering. Overall, our measurements provide validation for the Re proxy of OC petro oxidation and allow future work to further improve our knowledge of regional and global-scale rates of this important source of CO 2 in the geochemical carbon cycle.

58 GEOSCIENCES↗
DOE OSTI2021

Sulfidation of magnetite with incorporated uranium

Uranium (U) is a radionuclide of key environmental interest due its abundance by mass within radioactive waste and presence in contaminated land scenarios. Ubiquitously present iron (oxyhydr)oxide mineral phases, such as (nano)magnetite, have been identified as candidates for immobilisation of U via incorporation into the mineral structure. Studies of how biogeochemicalprocesses, such as sulfidation from the presence of sulfate-reducing bacteria, may affect iron (oxyhydr)oxides and impact radionuclide mobility are important in order to underpin geological disposal of radioactive waste and manage radioactively contaminated land. Here, this study utilised a highly controlled abiotic method for sulfidation of U(V) incorporated into nanomagnetite to determine the fate and speciation of U. Upon sulfidation, transient release of U into solution occurred (~8.6 % total U) for up to 3 days, despite the highly reducing conditions. As the system evolved, lepidocrocite was observed to form over a period of days to weeks. After 10 months, XAS and geochemical data showed all U was partitioned to the solid phase, as both nanoparticulate uraninite (U(IV)O2) and a percentage of retained U(V). Further EXAFS analysis showed incorporation of the residual U(V) fraction into an iron (oxyhydr)oxide mineral phase, likely nanomagnetite or lepidocrocite. Overall, these results provide new insights into the stability of U(V) incorporated iron (oxyhydr)oxides during sulfidation, confirming the longer term retention of U in the solid phase under complex, environmentally relevant conditions.

Townsend, Luke↗
DOE OSTI2023

Chemical impacts of subsurface CO 2 and brine on shallow groundwater quality

Leakage from geologic CO 2 sequestration (GCS) sites to overlying shallow drinking water aquifers is a tangible risk. A primary purpose of this study is to assess the potential impacts of CO 2 leakage into a fresh-water aquifer with associated CO 2 -water-sediment interactions. Here, the study site is the Ogallala aquifer overlying an active demonstration-scale GCS site in north Texas, USA. Using the results of combined batch experiments and reactive transport simulations, we discuss the effects of salinity on potential trace metal release and the potential for groundwater quality recovery after leakage ceases.

54 ENVIRONMENTAL SCIENCES↗