Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “emittance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Where do flares occur in RS CVn systems? Analysis of the October 3, 1981 flare on V711 Tau = HR 1099 observed by IUE

A set of IUE observations of V711 Tau = HR 1099 (K1 IV and G2 V) in which high-resolution spectra with the SWP and LWR cameras were obtained during the luminous flare of October 3, 1981 is discussed. Multigaussian fits to the Mg II k and C IV 1548 A lines are consistent with the flare radial velocity being identical to that of the K star. Thus, the flare probably occurred on the K star. There is no evidence for flows as seen during a flare on UX Ari. The strongest emitters of UV radiation during the flare were the L alpha and Mg II lines, which emitted seven times as much energy as all the transition region lines combined. The peak luminosity of the flare in the UV emission lines is 1.5 times 10 to the 31st power ergs/sec, and the total emission in these lines during the flare was about 4 times 10 to the 35th power ergs.

Linsky, J. L.↗
NASA NTRS1986

Controlling and monitoring the space-station plasma interaction: A baseline for performing plasma experiments and using advanced technology

The size, complexity, and motion of space station through the Earth's environmental plasma means that there will be a large, complicated interaction region, involving a sheath, wake, charging of surfaces, induced electric fields, secondary emission, outgassing with ionization, etc. This interaction will necessarily be a factor in carrying out and interpreting plasma experiments and in the use of certain technologies. Attention should be given ahead of time to: (1) monitoring this interaction so that it is well described; (2) implifying the interaction by appropriate design and construction of the spacecraft and by appropriate planning of technology use; and (3) controlling the interaction by both active and passive means. Plasma emitters for modifying and controlling the spacecraft charge should be placed in several locations. Portable electrostatic shields could be deployed around noisy sections of the spacecraft in order to carry out sensitive experiments. A particle umbrella could be raised to deflect the ram ions and neutrals in order to provide a controlled environment. These interactions are briefly discussed.

Whipple, Elden C.↗
NASA NTRS1987

Radiation and temperature effects in gallium arsenide, indium phosphide and silicon solar cells

The effects of radiation on performance are determined for both n(+)p and p(+)n GaAs and InP cells and for silicon n(+)p cells. It is found that the radiation resistance of InP is greater than that of both GaAs and Si under 1 MeV electron irradiation. For silicon, the observed decreased radiation resistance with decreased resistivity is attributed to the presence of a radiation induced boron-oxygen defect. Comparison of radiation damage in both p(+)n and n(+)p GaAs cells yields a decreased radiation resistance for the n(+)p cell attributable to increased series resistance, decreased shunt resistance, and relatively greater losses in the cell's p-region. For InP, the n(+)p configuration is found to have greater radiation resistance than the p(+)n cell. The increased loss in this latter cell is attributed to losses in the cell's emitter region. Temperature dependency results are interpreted using a theoretical relation for dVoc/cT which predicts that increased Voc should results in decreased numerical values for dPm/dT. The predicted correlation is observed for GaAs but not for InP a result which is attributed to variations in cell processing.

Weinberg, I.↗
NASA NTRS1987

Recent developments in indium phosphide space solar cell research

Recent developments and progress in indium phosphide solar cell research for space application are reviewed. Indium phosphide homojunction cells were fabricated in both the n+p and p+n configurations with total area efficiencies of 17.9 and 15.9% (air mass 0 and 25 C) respectively. Organometallic chemical vapor deposition, liquid phase epitaxy, ion implantation and diffusion techniques were employed in InP cell fabrication. A theoretical model of a radiation tolerant, high efficiency homojunction cell was developed. A realistically attainable AMO efficiency of 20.5% was calculated using this model with emitter and base doping of 6 x 10 to the 17th power and 5 x 10 the the 16th power/cu cm respectively. Cells of both configurations were irradiated with 1 MeV electrons and 37 MeV protons. For both proton and electron irradiation, the n+p cells are more radiation resistant at higher fluences than the p+n cells. The first flight module of four InP cells was assembled for the Living Plume Shield III satellite.

Brinker, David J.↗
NASA NTRS1987

Radiation damage of gallium arsenide production cells

High efficiency liquid phase epitaxy (LPE) gallium arsenide cells were irradiated with 1 Mev electrons up to fluences of 1 times 10 to the 16th power cm-2. Measurements of spectral response and dark and illuminated I-V data were made at each fluence and then, using computer codes, the experimental data was fitted to gallium arsenide cell models. In this way it was possible to determine the extent of the damage, and hence damage coefficients in both the emitter and base of the cell.

Mardesich, N.↗
NASA NTRS1987

Dynamic characteristics of far-field radiation of current modulated phase-locked diode laser arrays

A versatile and powerful streak camera/frame grabber system for studying the evolution of the near and far field radiation patterns of diode lasers was assembled and tested. Software needed to analyze and display the data acquired with the steak camera/frame grabber system was written and the total package used to record and perform preliminary analyses on the behavior of two types of laser, a ten emitter gain guided array and a flared waveguide Y-coupled array. Examples of the information which can be gathered with this system are presented.

Elliott, R. A.↗
NASA NTRS1986

Laboratory formation of a simulated comet

A laboratory simulation experiment to study the interaction between a cometary plasma and the solar wind has been performed using the UCR-T1 space simulation facility (dia. 1.3 m, length 11 m). Intense plasma flow simulating the solar wind interacts with another light-emitting plasma composed of Ba, Sr, and/or C by a plasma emitter which simulates a cometary coma. The purposes of this experiment are to investigate how the solar wind parameters contribute to the formation of the cometary ion tail and to determine the magnetic field structure of a comet. In order to estimate the solar wind parameters by ground-based observations of actual comets, knowledges of such relationships are essential. The experimental results show that the interplanetary magnetic field of the solar wind is very important in forming the cometary tail.

Minami, S.↗
NASA NTRS1986

Further advances in silicon solar cell technology for space application

Recent improvements relating to the design of high efficiency cells are presented. A conceptual design using passivation techniques is discussed, which potentially increases the open circuit voltage to approximately 650 mV. This concept is supported by experimental data using only silicon passivation beneath contacts. The use of thin thermal oxides of silicon for passivation between contacts is also discussed. A number of novel structures have also been fabricated to investigate reduction in the thermal alpha of planar and sculptured cells. It is shown that this may be as low as 0.63 on glassed gridded back cells, and that the IR rejection beyond 1.1 microns may approach 100 percent if the backside is AR coated. Finally, experimental data is given to support the existence of free electron absorption in heavily doped emitters on sculptured cells.

Lillington, D. R.↗
NASA NTRS1985

Measurement and analysis of solar cell current-voltage characteristics

Approaches to measurement and analysis of solar cell current-voltage characteristics under dark and illuminated conditions are discussed. Measurements are taken with a computer based data acquisition system for temperatures in the range of -100 to +100 C. In the fitting procedure, the various I(oi) and C(i) as well as R(S) and R(SH) are determined. Application to current-voltage analyses of high efficiency silicon cells and Boeing CdS/CuInSe2 are discussed. In silicon MINP cells, it is found that at low voltages a tunneling mechanism is dominant, while at larger voltages the I-V characteristics are usually dominated by emitter recombination. In the case of Boeing cells, a current transport model based on a tunneling mechanism and interface recombination acting in series has been developed as a result of I-V analyses.

Olsen, Larry C.↗
NASA NTRS1987

Heat transfer studies on the liquid droplet radiator

This paper examines radiation transfer in the droplet sheet of a liquid droplet radiator including non-isotropic scattering by the droplets. Non-isotropic scattering becomes significant for small droplets (diameter less than 0.1 mm) and for low emissivity liquids. For droplets with an emittance of 0.1 and for a droplet sheet optical depth or 5, the radiated power varies by about 12 percent, depending on whether scattering is predominantly forward or backward. An experimental measurement of the power emitted by a cylindrical cloud of heated droplets of silicone fluid is also reported. The measured cloud emissivity correlates, within experimental error, with the analytical model.

Mattick, A. T.↗
NASA NTRS1986

Constraints on dark matter from cosmic background anisotropies

The major stages in the linear evolution of the statistical ensemble of adiabatic fluctuations in radiation, baryons, and dark matter are discussed. If it is assumed that the distribution of light emitters (i.e., of galaxies) follows the distribution of mass (i.e., of dark matter), then universes dominated by massive collisionless relics of the Big Bang must have Omega larger than 0.2 h exp -4/3 to avoid exceeding the current observational limits on small-scale anisotropies in the microwave background. However, values of Omega of about 0.2 are indicated by dynamical studies of galaxy clustering. It is concluded that universes dominated by cold dark matter in which light traces mass are probably not viable models.

Bond, J. R.↗
NASA NTRS1986

Star formation in active dwarf galaxies

Star formation and the ISM in active dwarf galaxies are studied based on data from the IRAS Point Source Catalog. The dwarf galaxies that show evidence of recent energetic star formation are generally also strong far-infrared emitters; thus, active current star formation is associated with a history of energetic star formation. A fraction of the galaxies considered here have a star formation rate that is significantly greater than the average rate in the recent past. Available gas is being consumed as efficiently in the presently active dwarfs as in the Milky Way. A primary difference between galaxies that are energetically forming stars and those that are not is the difference in gas mass, as well as the efficiency of star formation. The most important process may be the assembly of large amounts of gaseous material.

Thronson, Harley A., Jr.↗
NASA NTRS1987

Chemically assisted ion beam etching of polycrystalline and (100)tungsten

A chemically assisted ion-beam etching technique is described which employs an ion beam from an electron-bombardment ion source and a directed flux of ClF3 neutrals. This technique enables the etching of tungsten foils and films in excess of 40 microns thick with good anisotropy and pattern definition over areas of 30 sq mm, and with a high degree of selectivity. (100) tungsten foils etched with this process exhibit preferred-orientation etching, while polycrystalline tungsten films exhibit high etch rates. This technique can be used to pattern the dispenser cathode surfaces serving as electron emitters in traveling-wave tubes to a controlled porosity.

Garner, Charles↗
NASA NTRS1987

Positrons from accelerated particle interactions

Positron production from the decay of radioactive nuclei produced in nuclear interactions of accelerated particles is treated in detail. Laboratory data as well as theoretical considerations are used to construct energy-dependent cross sections for the production of a large number of radioactive positron emitters resulting from proton and alpha-particle interactions with ambient cosmic matter. Using these cross sections, positron production rates are calculated for a variety of energetic particle spectra, assuming solar abundances for both the energetic particles and the ambient medium. These results can be used for the study of astrophysical sites which emit annihilation radiation. In particular, the results have been applied to solar flares, where the observed 0.511 MeV line is shown to be due to positrons resulting from accelerated particle reactions.

Kozlovsky, B.↗
NASA NTRS1987

Materials property definition and generation for carbon-carbon and carbon phenolic materials

A data base program to generate statistically significant material-property data for carbon-carbon and carbon phenolic materials to be used in designs of Space Shuttle is described. The program, which will provide data necessary for thermal and stress modeling of Shuttle nozzle and exit cone structures, includes evaluation of tension, compression, shear strength, shear modulus, thermal expansion, thermal conductivity, permeability, and emittance for both materials; the testing of carbon phenolic materials also includes CTE, off-gassing, pyrolysis, and RTG. Materials to be tested will be excised from Space Shuttle inlet, throat, and exit cone billets and modified involute carbon-carbon exit cones; coprocessed blocks, panels, and cylinders will also be tested.

Canfield, A. R.↗
NASA NTRS1987

A study of a flux-limited sample of IRAS galaxies

Redshift data and accurate four-color infrared photometry are presented for a complete IRAS sample of galaxies brighter than 2 Jy at 60 microns. A simple power law provides a good fit to the distribution for luminosities from 10 to the 10th to 10 to the 12th solar. There is no indication of an exponential dropoff in the luminosity function at high energies. A flattening of the luminosity function occurs at L less than 10 to the 20th solar. The highest luminosity galaxies typically are found in multiple, possibly interacting, systems and exhibit marginally narrower infrared spectral energy distributions than the isolated spirals which predominate at low luminosities. Infrared-bright galaxies come from a different population than the majority of optically bright galaxies. In particular, galaxies of low blue luminosity are not strong infrared emitters.

Smith, Beverly J.↗
NASA NTRS1988

Improved Traveling-Wave Tube

New space traveling-wave tube (TWT) provides coherent source of 75 watts of continuous-wave power output over bandwidth of 5 GHz at frequency of 65 GHz. Coupled-cavity TWT provides 50 dB of saturated gain. Includes thermionic emitter, M-type dispenser cathode providing high-power electron beam. Beam focused by permanent magnets through center of radio-frequency cavity structure. Designed for reliable operation for 10 years, and overall efficiency of 35 percent minimizes prime power input and dissipation of heat.

Rousseau, Art↗
NASA NTRS1988

Chromic acid anodizing of aluminum foil

The success of the Space Station graphite/epoxy truss structure depends on its ability to endure long-term exposure to the LEO environment, primarily the effects of atomic oxygen and the temperture cycling resulting from the 94 minute orbit. This report describes the development and evaluation of chromic acid anodized (CAA) aluminum foil as protective coatings for these composite tubes. Included are: development of solar absorptance and thermal emittance properties required of Al foil and development of CAA parameters to achieve these optical properties; developing techniques to CAA 25 ft lengths of Al foil; developing bonding processes for wrapping the Al foil to graphite/epoxy tubes; and atomic oxygen testing of the CAA Al foil. Two specifications were developed and are included in the report: Chromic Acid Anodizing of Aluminum Foil Process Specification and Bonding of Anodized Aluminum Foil to Graphite/Epoxy Tubes. Results show that CAA Al foil provides and excellent protective and thermal control coating for the Space Station truss structure.

Dursch, H.↗