Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Study of the performance of antennas in magnetized plasmas

The antenna studies were performed in a large magnetized plasma source, a schematic drawing of which is shown. The plasma diagnostics consist of a 70 GHz (4 mm) microwave interferometer for density measurements and of various Langmuir probes for spatially resolved measurements of t sub e, n sub e and the shape of the electron distribution function. All diagnostic data are time-resolved by sample-and-hold techniques so as to yield information about the plasma build-up, the steady-state discharge, and the plasma decay in the afterglow. Whistler waves are excited and detected with various antennas which are inserted into the center of the plasma column through one axial and two orthogonal radial ports. The antennas were tested for their proper dipole response and then calibrated in a known field geometry in air. For the electric dipole, a parallel plate capacitor field was used; the magnetic loop is calibrated in the near-zone field of a long linear conductor of known radio frequency current distribution. Results are presented and discussed.

Stenzel, R. L.↗
NASA NTRS1987

Advanced powder metallurgy aluminum alloys via rapid solidification technology, phase 2

Marko's rapid solidification technology was applied to processing high strength aluminum alloys. Four classes of alloys, namely, Al-Li based (class 1), 2124 type (class 2), high temperature Al-Fe-Mo (class 3), and PM X7091 type (class 4) alloy, were produced as melt-spun ribbons. The ribbons were pulverized, cold compacted, hot-degassed, and consolidated through single or double stage extrusion. The mechanical properties of all four classes of alloys were measured at room and elevated temperatures and their microstructures were investigated optically and through electron microscopy. The microstructure of class 1 Al-Li-Mg alloy was predominantly unrecrystallized due to Zr addition. Yield strengths to the order of 50 Ksi were obtained, but tensile elongation in most cases remained below 2 percent. The class 2 alloys were modified composition of 2124 aluminum alloy, through addition of 0.6 weight percent Zr and 1 weight percent Ni. Nickel addition gave rise to a fine dispersion of intermetallic particles resisting coarsening during elevated temperature exposure. The class 2 alloy showed good combination of tensile strength and ductility and retained high strength after 1000 hour exposure at 177 C. The class 3 Al-Fe-Mo alloy showed high strength and good ductility both at room and high temperatures. The yield and tensile strength of class 4 alloy exceeded those of the commercial 7075 aluminum alloy.

Ray, Ranjan↗
NASA NTRS1987

Full CI benchmark calculations for several states of the same symmetry

Full CI (FCI) wave functions are used to compute energies for several electronic states of the same symmetry for SiH2, CH2, and CH2(+). It is found that CASSCF/multireference CI wave functions yield results very similar to FCI, irrespective of whether the CASSCF MOs are optimized independently for each state or using an average of the CASSCF energies for all desired states. The ionization potentials and excitation energies obtained from the FCI calculations should help calibrate methods (such as Green's function approaches, equations of motion and propagator methods, and cluster expansions) in which energy differences are computed directly.

Bauschlicher, Charles W., Jr.↗
NASA NTRS1988

A self-consistent interpretation of the solar flare extreme-ultraviolet to hard X-ray ratio in large events

This paper shows quantitatively that when a limiting X-ray yield is considered, a universal area of 10 to the 17th sq cm used in the thick-target electron bombardment model of McClymont and Canfield (1986) cannot explain the observed hard X-ray flux in large solar flare events without recourse to extreme values of the physical parameters of the flaring corona. The return current ohmic heating produced by a beam of flux 10 to the 13th ergs/sq cm/s results in a coronal temperature in excess of 100 million K. In this case, the thermal hard X-ray emission dominates the nonthermal emission and the EUV-to-hard X-ray ratio would not decrease with increasing hard X-ray flux, as observed. Hence, any model that requires a beam flux of 10 to the 13th ergs/sq cm/s is untenable. It is proposed that these apparently contradictory results can be reconciled if the X-ray emitting area is substantially larger than the area of the chromospheric precipitation site.

Larosa, T. N.↗
NASA NTRS1998

C2 Fragmentation Energy of C60 Revisited: Theory Disagrees with Most Experiments

Following our earlier work on the subject, we have carried out density functional theory (DFT) and second-order Moller-Plesset perturbation theory (MP2) calculations of the dissociation energy of the reaction C60 yields C58 + C2 using polarized basis sets and geometries optimized with DFT methods. The present theoretical results support an electronic fragmentation energy D(sub e) around 10-11 eV in disagreement with most experimental results that place the dissociation energy D(sub o) (including zero point energy) around 7-8 eV. The plausible errors remaining in the theoretical calculations are unlikely to account for this big difference (2-4 eV).

Boese, A. Daniel↗
NASA NTRS2001

Gridded Hourly Text Products: A TRMM Data Reduction Approach

The quantity of precipitation data from satellite-based observations is a blessing and a curse. The sheer volume of the data makes it difficult for many researchers to use in targeted applications. This volume increases further as algorithm improvements lead to the reprocessing of mission data. In addition to the overall volume of data, the size and format complexity of orbital granules contribute to the difficulty in using all the available data. Finally, the number of different instruments available to measure rainfall and related parameters further contributes to the volume concerns. In summary, we have an embarrassment of riches. The science team of the Tropical Rainfall Measuring Mission (TRMM) recognized this dilemma and has developed a strategy to address it. The TRMM Science Data and Information System (TSDIS) produces, at the direction of the Joint TRMM Science Team, a number of instantaneous rainfall products. The TRMM Microwave Imager (TMI), the Precipitation Radar and a Combined TMI/PR are the key "instruments" used in this production. Each of these products contains an entire orbit of data. The algorithm code computes not just rain rates but a large number of other physical parameters as well as information needed for monitoring algorithm performance. That makes these products very large. For example, a single orbit of TMI rain rate product is 99 MB, a single orbit of the combined product yields a granule that is 158 MB, while the 80 vertical levels of rain information from the PR yields an orbital product of 253 MB. These are large products that are often difficult for science users to electronically transfer to their sites especially if they want a large period of time. Level 3 gridded products are much smaller, but their 5 or 30 day temporal resolution is insufficient for many researchers. In addition, TRMM standard products are produced in the HDF format. While a large number of user-friendly tools are available to hide the details of the format (including a toolkit developed at TSDIS for the TRMM science team), many potential users shy away

Stocker, Erich↗
NASA NTRS2004

SIM PlanetQuest: Science with the Space Interferometry Mission

SIM - the Space Interferometry Mission - will perform precision optical astrometry on objects as faint as R magnitude 20. It will be the first space-based astrometric interferometer, operating in the optical band with a 10-m baseline. The Project is managed by the Jet Propulsion Laboratory, California Institute of Technology, in close collaboration with two industry partners, Lockheed Martin Missiles and Space, and TRW Inc., Space and Electronics Group. Launch of SIM is currently planned for 2009. In its wide-angle astrometric mode, SIM will yield 4 microarcsecond absolute position and parallax measurements. Astrometric planet searches will be done in a narrow-angle mode, with an accuracy of 4 microarcseconds or better in a single measurement. As a pointed rather than a survey instrument, SIM will maintain.its astrometric accuracy down to the faintest, magnitudes, opening up the opportunity for astrometry of active galactic nuclei to better than 10 pas. SIM will define a new astrometric reference frame, using a grid of approximately 1500 stars with positions accurate to 4 microarcseconds. The SIM Science Team comprises the Principal Investigators of ten Key Projects, and five Mission Scientists contributing their expertise to specific areas of the mission. Their science programs cover a wide range of topics in Galactic and extragalactic astronomy. They include: searches for low-mass planets - including analogs to our own solar system - tlie formation and dynamics of our Galaxy, calibration of the cosmic distance scale, and fundamental stellar astrophysics. All of the science observing on SIM is competitively awarded; the Science Team programs total about 40% of the total available, and the remainder will be assigned via future NASA competitions. This report is a compilation of science summaries by members of the Science Team, and it illustrates the wealth of scientific problems that microarcsecond-precision astrometry can contribute to. More information on SIM, including copies of this report, may be obtained from the project web site, at http://sim. jpl.nasa.gov.

Unwin, Stephen↗
NASA NTRS1989

Computation of electron density in high altitude re-entry flows

The direct simulation Monte Carlo (DSMC) method has been modified to deal with the very small degree of ionization that occurs in the early stages of the 'communications blackout' phase of re-entry. The simplified model of the process assumes that the ionization is entirely a consequence of the reaction N + O yields NO(+) + e-. The measurements from the RAM C-II test vehicle at an altitude of 81 km have been chosen as the test case. It was found that the form of the electron distribution along the shock layer was in agreement with the measurements. That normal to the surface was also in agreement with the measurements if the surface is regarded as fully catalytic. However, quantitative agreement for the fully catalytic case requires a reaction rate about an order of magnitude greater than those generally associated with this reaction.

Bird, G. A.↗
DOE OSTI2025

One-Step Transfer of Symmetric and Asymmetric Contacts for Large-Scale 2D Electronics and Optoelectronics

Two-dimensional (2D) semiconductors are highly promising candidates for thin-film transistor applications due to their scalability, transferability, atomic thickness, and relatively high carrier mobility. However, a substantial performance gap remains between individual devices based on single-crystalline 2D films and wafer-scale integrated circuits, primarily due to defects introduced during conventional fabrication processes. Here, we report a diamond-assisted electrode transfer technique for the van der Waals integration of wafer-scale prefabricated electrode arrays onto 2D materials, enabling scalable electronics and optoelectronics. Implemented on metal–organic chemical vapor deposition-grown monolayer molybdenum disulfide, this method forms ultraclean metal–semiconductor interfaces, yielding field-effect transistors with excellent ohmic contacts, a low contact resistance of 400 Ω·μm, and a Schottky barrier height of only 9 meV. Furthermore, we demonstrate a scalable transistor array on monolayer molybdenum disulfide with excellent device performance uniformity, achieving an average field-effect mobility of 30 cm 2 V –1 s –1 and an on/off current ratio exceeding 105. Additionally, high photocurrent and responsivity were demonstrated in the array devices, showing their potential for excellent image detection. We further demonstrate the versatility of this technique by fabricating a Schottky diode array through a single-step transfer of asymmetric electrodes─low work function aluminum and high work function gold─onto monolayer tungsten diselenide. This approach provides a clean, effective solution for contact engineering in 2D materials, offering a viable pathway toward wafer-scale, high-performance 2D electronics, optoelectronics, and integrated circuits.

2D electronics↗
DOE OSTI2024

Itinerant ferromagnetism in transition metal dichalcogenide moiré superlattices

Moiré materials are artificial crystals formed at van der Waals heterojunctions that have emerged as a highly tunable platform that is able to realize much of the rich quantum physics of electrons in atomic scale solids, and in several cases even new quantum phases of matter. Here we use finite-size exact diagonalization methods to explore the physics of single-band itinerant electron ferromagnetism in semiconductor moiré materials. As a result, we predict where ferromagnetism is likely to occur in triangular-lattice moiré systems, and where it is likely to yield the highest Curie temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Radiation-Induced Long-Lived Transients and Metal Particle Formation in Solid KCl–MgCl 2 Mixtures

Here, the electron paramagnetic resonance and diffuse reflectance-optical absorption spectra of room-temperature γ-irradiated KCl–MgCl 2 binary solid salt mixtures (98:2 mol % and 2:98 mol %) and the eutectic (68:32 mol %) are reported. Additionally, powder X-ray diffraction of the pristine salts and thermal annealing studies of the irradiated salts were performed to evaluate the radiolysis product stability, annihilation, and association in metallic particles. The main long-lived transient species detected in 98:2 mol % KCl–MgCl 2 salts were perturbed F-centers, that is, trapped electrons (e t – ) in the vicinity of Mg ions (λ max at 561 nm), and the radiolytic reduction of Mg 2+ to Mg + and Mg 0 . Thermal annealing promoted the diffusion of defects to yield polycations (Mg n + ). On the other hand, irradiation of 2:98 mol % KCl/MgCl 2 salts showed the formation of cationic and neutral Mg dimers (Mg 2 + and Mg 2 ) and trimers as well as centers with a rhombic powder pattern apparently consisting of an electron shared between three Mg 2+ nuclei associated with an anion vacancy (ν a + –Mg 3 5+ ). Trapped electrons (e t – ) (F-centers) were not observed in the irradiated eutectic mixture; instead, Mg 2 , Mg 0 , and Cl 3 – were observed. It was observed that the higher temperature for thermal ionization of radiation-reduced Mg species decreased the extent of electron recombination reactions and the disproportionation of Cl 3 – compared to the pure KCl but enhanced the aggregation of Mg into larger metallic microstructures (metallic particles).

36 MATERIALS SCIENCE↗
DOE OSTI2021

Theory of Plasmonic Hot-Carrier Generation and Relaxation

Hot-carrier (HC) generation from (localized) surface plasmon decay has recently attracted much attention due to its promising applications in physical, chemical, materials, and energy science. However, the detailed mechanisms of plasmonic HC generation, relaxation, and trapping are less studied. In this work, we developed and applied a quantum-mechanical model and coupled master equation method to study the generation of HCs from plasmon decay and their following relaxation processes with different mechanisms treated on equal footing. First, a quantum-mechanical model for HC generation is developed. Its connection to existing semiclassical models and time-dependent density functional theory (TDDFT) is discussed. Second, the relaxation and lifetimes of HCs are investigated in the presence of electron–electron and electron–phonon interactions. A GW-like approximation is introduced to account for the electron–electron scattering. The numerical simulations on the Jellium nanoparticles with a size up to 1.6 nm demonstrate the electron–electron scattering and electron–phonon scattering dominate different time scale in the relaxation dynamics. We also generalize the model to study the extraction of HCs to attached molecules. The quantum yield of extracting HCs for other applications is found to be size-dependent. In general, the smaller size of NP improves the quantum yield, which is in agreement with recent experimental measurements. Even though we demonstrate this newly developed theoretical formalism with Jellium model, the theory applies to any other atomistic models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

Oscillator strengths and collision strengths for some ions of oxygen and sulphur

Collision strengths for electron impact excitation of the O II, O III, S II and S III for some transitions in the ultraviolet of the type ns(sup 2) np(sup q) yields ns np(sup q +1), ns(sup 2) np(sup q) yields ns(sup 2) np(sup q-1) (n+1)s and 3s2 3p(sup q) yields 352 3p(sup q -1) 3d are calculated in a close coupling approximation for an energy rate up to one million K. Configuration interaction target wave functions which give oscillator strengths accurate to 10% for O II and O III, and 20-30% for S II and S III, are used in the expansion. Accurate knowledge of the electron impact excitation cross sections is particularly significant for a proper interpretation of the combined ultraviolet observations of the Voyager UVS and IUE results on properties of the Io plasma torus.

Ho, Y. K.↗
NASA NTRS1974

Crossed beam study of the reaction O/+/ + N2 yields NO/+/ + N

The kinematics of the reaction O(+)(4 S) + N2 yields NO(+) + N were studied using crossed molecular beams. Product angular and energy distributions were measured for the initial relative translational energy range from 1.5 to 15.8 eV. The products are formed in their ground electronic states. The product distributions are described, with some deviations, by the spectator stripping model. No evidence was found for a persistent complex or for a second mechanism. A scattering chamber study of 0 deg lab was made of the related reactions 15N(+) + 14NO yields 15N14N(+), 15NO(+), 14NO(+). The results obtained are discussed in terms of possible surface hopping effects.

Smith, G. P. K.↗
DOE OSTI2025

Illuminating the mechanistic impacts of an Fe-quaterpyridine functionalized crystalline poly(triazine imide) semiconductor for photocatalytic CO 2 reduction

The strategy of incorporating earth-abundant catalytic centers into light-absorbing architectures is desirable from the viewpoint of low cost, low toxicity, and versatility for activating small molecules to produce solar-based fuels. Herein, we show that an Fe-quaterpyridine molecular catalyst can be anchored to a light-absorbing, crystalline, carbon nitride (PTI), to yield a molecular-catalyst/material hybrid, Fe-qpy-PTI, capable of facilitating CO 2 reduction to CO selectively (up to ∼97–98%) in aqueous solution under low-intensity light irradiation. This hybrid material leverages the ability of the Fe-qpy catalyst to bind CO 2 upon a one-electron reduction, as achieved by transfer of excited electrons from the carbon-nitride semiconductor. At a low incident power density of only 50 mW cm −2 , the catalytic activity of the hybrid material was measured across a range of catalyst loadings from 0.1–3.8 wt%, yielding CO rates of up to 596 μmol g −1 h −1 for a 3.8 wt% loading during a 3 h experiment. Over the course of 8 h, the hybrid material attained a CO evolution rate of 608 μmol g −1 h −1 and 305 turnovers for a TOF of ∼38 h −1 and an apparent quantum yield of 2.6%. Higher light intensities provided an initial increase in activity but negatively impacted photocatalytic rates with time, with an AQY of 0.6% at 150 mW cm −2 and 0.4% at 250 mW cm −2 . Transient absorption spectroscopy results showed electron survival probabilities consistent with the trends in observed product rates. Computational modeling was also used to evaluate and understand the mechanistic pathway of the high product selectivity for CO versus H 2 . These results thus help unveil key factors for leveraging the mechanistic understanding of molecular catalysts for CO 2 reduction for pairing with light absorbing semiconductors and establishing optimal conditions to attain maximal rates in aqueous solution.

McGuigan, Scott [Baylor University, Waco, TX (Unit↗
NASA NTRS2000

Photoionization and Recombination

Theoretically self-consistent calculations for photoionization and (e + ion) recombination are described. The same eigenfunction expansion for the ion is employed in coupled channel calculations for both processes, thus ensuring consistency between cross sections and rates. The theoretical treatment of (e + ion) recombination subsumes both the non-resonant recombination ("radiative recombination"), and the resonant recombination ("di-electronic recombination") processes in a unified scheme. In addition to the total, unified recombination rates, level-specific recombination rates and photoionization cross sections are obtained for a large number of atomic levels. Both relativistic Breit-Pauli, and non-relativistic LS coupling, calculations are carried out in the close coupling approximation using the R-matrix method. Although the calculations are computationally intensive, they yield nearly all photoionization and recombination parameters needed for astrophysical photoionization models with higher precision than hitherto possible, estimated at about 10-20% from comparison with experimentally available data (including experimentally derived DR rates). Results are electronically available for over 40 atoms and ions. Photoionization and recombination of He-, and Li-like C and Fe are described for X-ray modeling. The unified method yields total and complete (e+ion) recombination rate coefficients, that can not otherwise be obtained theoretically or experimentally.

Nahar, Sultana N.↗
NASA NTRS1973

Amplitude variations of whistler-mode signals caused by their interaction with energetic electrons of the magnetosphere

Whistler mode waves that propagate through the magnetosphere exchange energy with energetic electrons by wave-particle interaction mechanisms. Using linear theory, a detailed investigation is presented of the resulting amplitude variations of the wave as it propagates. Arbitrary wave frequency and direction of propagation are considered. A general class of electron distributions that are nonseparable in particle energy and pitch-angle is proposed. It is found that the proposed distribution model is consistent with available whistler and particle observations. This model yields insignificant amplitude variation over a large frequency band, a feature commonly observed in whistler data. This feature implies a certain equilibrium between waves and particles in the magnetosphere over a wide spread of particle energy, and is relevant to plasma injection experiments and to monitoring the distribution of energetic electrons in the magnetosphere.

Bernard, L. C.↗
DOE OSTI2025

Radiolytic Production of Radical Species in Gibbsite Doped with Iron and Chromium Ions

Gibbsite (aluminum hydroxide, Al(OH) 3 ) nanoparticles, synthesized from aluminum chloride or aluminum nitrate, were doped with metal ions, Cr(III) or Fe(III), and then irradiated with γ rays to determine the effect of the dopants on radiolytic hydrogen (H 2 ) production and radical generation. The addition of Cr(III) and Fe(III) ions at concentrations of 0.5% or 5% decreased the concentration of stable oxygen-centered radicals, with the strongest suppression in Cr(III) doped samples. A decrease in H 2 yields was observed with increasing Cr(III) or Fe(III) concentrations, with the greatest effect observed for the Fe(III)-doped samples. Reduction of the Cr(III) to Cr(II) and Fe(III) to Fe(II) was also observed, probably due to scavenging of radiolytically produced electrons. However, further processes differ for Fe(III)- and Cr(III)-doped systems. Both ions are reduced by the free electrons, leading to a decrease in H 2 production, but they react differently with the oxygen radicals. Cr(III) can be oxidized by oxygen radicals, whereas Fe(III) cannot. Fe(II) can interact with peroxides, possible products of intermediate oxygen oxidation, converting back to Fe(III) and leaving oxygen radicals behind. These oxidation reactions lead to a difference in the observed relative effects on H 2 yields and oxygen radical production between Cr(III)- and Fe(III)-doped gibbsite. In conclusion, the connection between electron scavenging and H 2 production indicates that radiolytically produced electrons are precursors to H 2 .

Anions↗