Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “description”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

HP-9825A HFRMP trajectory processor (#TRAJ), detailed description

The computer code for the trajectory processor (#TRAJ) of the high fidelity relative motion program is described. The #TRAJ processor is a 12-degrees-of-freedom trajectory integrator (6 degrees of freedom for each of two vehicles) which can be used to generate digital and graphical data describing the relative motion of the Space Shuttle Orbiter and a free-flying cylindrical payload. A listing of the code, coding standards and conventions, detailed flow charts, and discussions of the computational logic are included.

Kindall, S. M.↗

Fiber-optic instrumentation: Cryogenic sensor model description

An assessment and determination of technology requirements for developing a demonstration model to evaluate feasibility of practical cryogenic liquid level, pressure, and temperature sensors is presented. The construction of a demonstration model to measure characteristics of the selected sensor and to develop test procedures are discussed as well as the development of an appropriate electronic subsystem to operate the sensors.

Sharma, M. M.↗

Computer prediction of three-dimensional potential flow fields in which aircraft propellers operate: Computer program description and users manual

A method was developed for predicting the potential flow velocity field at the plane of a propeller operating under the influence of a wing-fuselage-cowl or nacelle combination. A computer program was written which predicts the three dimensional potential flow field. The contents of the program, its input data, and its output results are described.

Jumper, S. J.↗

Trajectory description

The launch, interplanetary, encounter, and Mars orbit phases of the Viking 1 and 2 spacecraft trajectories are described. Time history plots of several parameters relative to the trajectories are presented along with tables of the geocentric, heliocentric, aerocentric, and injection orbital elements appropriate to each of the spacecraft trajectories.

Farless, D. L.↗

Description of an experimental (hydrogen peroxide) rocket system and its use in measuring aileron and rudder effectiveness of a light airplane

A hydrogen peroxide fueled rocket system, which is to be used as a research tool in flight studies of stall and spin maneuvers, was installed on a light, four place general aviation airplane. The pilot controlled rocket system produces moments about either the roll or the yaw body axis to augment or oppose the aerodynamic forces and inertial moments acting on the airplane during various flight maneuvers, including the spin. These controlled moments of a known magnitude can be used in various ways to help analyze and interpret the importance of the various factors which influence airplane maneuvers. The rocket system and its installation in the airplane are described, and the results of flight rests used to measure rudder and aileron effectiveness at airspeeds above the stall are presented. These tests also serve to demonstrate the operational readiness of the rocket system for future research operations.

Obryan, T. C.↗

Description and texts for the auxiliary programs for processing video information on the YeS computer. Part 3: Test program 2

The functions were discribed and the operating instructions, the block diagram and the proposed versions are given for modifying the program in order to obtain the statistical characteristics of multi-channel video information. The program implements certain man-machine methods for investigating video information. It permits representation of the material and its statistical characteristics in a form which is convenient for the user.

Borisenko, V. I., G.g.↗

System description and analysis. Part 1: Feasibility study for helicopter/VTOL wide-angle simulation image generation display system

A preliminary design for a helicopter/VSTOL wide angle simulator image generation display system is studied. The visual system is to become part of a simulator capability to support Army aviation systems research and development within the near term. As required for the Army to simulate a wide range of aircraft characteristics, versatility and ease of changing cockpit configurations were primary considerations of the study. Due to the Army's interest in low altitude flight and descents into and landing in constrained areas, particular emphasis is given to wide field of view, resolution, brightness, contrast, and color. The visual display study includes a preliminary design, demonstrated feasibility of advanced concepts, and a plan for subsequent detail design and development. Analysis and tradeoff considerations for various visual system elements are outlined and discussed.

Source record↗

Space construction system analysis study: Project systems and missions descriptions

Three project systems are defined and summarized. The systems are: (1) a Solar Power Satellite (SPS) Development Flight Test Vehicle configured for fabrication and compatible with solar electric propulsion orbit transfer; (2) an Advanced Communications Platform configured for space fabrication and compatible with low thrust chemical orbit transfer propulsion; and (3) the same Platform, configured to be space erectable but still compatible with low thrust chemical orbit transfer propulsion. These project systems are intended to serve as configuration models for use in detailed analyses of space construction techniques and processes. They represent feasible concepts for real projects; real in the sense that they are realistic contenders on the list of candidate missions currently projected for the national space program. Thus, they represent reasonable configurations upon which to base early studies of alternative space construction processes.

Source record↗

Description of texts of auxiliary programs for processing video information. Part 2: SUODH program of automated separation of quasihomogeneous formations

The algorithm, block diagram, complete text, and instructions are given for the use of a computer program to separate formations whose spectral characteristics are constant on the average. The initial material for operating the computer program presented is video information in a standard color-superposition format.

Borisenko, V. I.↗

Description of the warm core turbine facility recently installed at NASA Lewis Research Center

The two net facilities were installed and operated at their design, or rated conditions. The important feature of both of these facilities is that the ratio of turbine inlet temperature to coolant temperature encountered in high temperature engines can be duplicated at moderate turbine inlet temperature. The limits of the facilities with regard to maximum temperature, maximum pressure, maximum mass flow rate, turbine size, and dynamometer torque-speed characteristics are discussed.

Whitney, W. J.↗

Preliminary description and interpretation of Apollo 14 cores 14211/10

Core 14211/10 is a 2 cm-diameter double drive tube that was collected within the smooth plains area of the Apollo 14 landing site. Rock fragments in the core appear to be derived from the smooth plains area because the coring site is beyond ejecta range of Cone Crater and is within the expected continuous ejecta of two large craters in the plains. The characteristics of the glassy soil breccia zone between 12.5 and 15.5 cm indicate that this zone represents the bottom of a glass-lined crater. At least some of the dark agglutinate and glass-rich soils at the top of the core are mature, by FMR measurements, and show maturation interrelationships between particle types. Hence, this dark interval is interpreted as a gardened zone.

Nagle, J. S.↗

Two-stream approximations to radiative transfer in planetary atmospheres - A unified description of existing methods and a new improvement

Existing two-stream approximations to radiative transfer theory for particulate media are shown to be represented by identical forms of coupled differential equations if the intensity is replaced by integrals of the intensity over hemispheres. One set of solutions thus suffices for all methods and provides convenient analytical comparisons. The equations also suggest modifications of the standard techniques so as to duplicate exact solutions for thin atmospheres and thus permit accurate determinations of the effects of typical aerosol layers. Numerical results for the plane albedos of plane-parallel atmospheres are given for conventional and modified Eddington approximations, conventional and modified two-point quadrature schemes, the hemispheric-constant method and the delta-function method, all for comparison with accurate discrete-ordinate solutions. A new two-stream approximation is introduced that reduces to the modified Eddington approximation in the limit of isotropic phase functions and to the exact solution in the limit of extreme anisotropic scattering. Comparisons of plane albedos and transmittances show the new method to be generally superior over a wide range of atmospheric conditions (including cloud and aerosol layers), especially in the case of nonconservative scattering.

Meador, W. E.↗

Variational description of the positive column with two-step ionization

The ionization balance in diffusion-dominated discharges may depend on both one- and two-step ionization processes. The Spenke diffusion equation describing such conditions is solved in this paper by the Rayleigh-Ritz variational method. Simple analytic approximations to the density profile, and the similarity relation between the equation parameter, and the discharge dimensions, are derived for planar and cylindrical geometry and compared with exact computations for certain limiting cases.

Crawford, F. W.↗

A fluid description of plasma double-layers

The space-charge double layer forming between two plasmas with different densities and thermal energies is described. The double layer is analyzed using fluid theory. The case of cold particles is treated. Thermal effects for the reflected particles and for the transmitted particles are considered. Emphasis is placed on finding a relationship between the magnitude of the potential step and the parameters characterizing the adjoining plasmas. Qualitative statements are made about the length of the double layer, and a characteristic length useful as a quantitative measure is defined and discussed.

Levine, J. S.↗

Description of the manufacturing challenges in producing the high-temperature reusable surface insulation for the thermal protection system of the Space Shuttle

The paper describes the high-temperature reusable surface insulation for the thermal protection system of the Space Shuttle. This system protects the Space Shuttle Orbiter on reentry and it is an externally attached, rigidized, fibrous silica, machined into 15 x 20 cm tiles. The tiles constitute the High-Temperature Reusable Surface Insulation (HRSI) system, and are used on over 70 percent of the exterior surface where peak temperatures range from 400 to 1260 C. Carbon-carbon leading edges are used in areas where peak temperatures exceed 1650 C, and a Nomex felt flexible insulation system is used in regions below 400 C. Approximately 32,000 tiles are used in the HRSI system, and due to vehicle configuration and aerodynamic requirements no two tiles are alike.

Forsberg, K.↗

Description and preliminary results of the 9-level UCLA general circulation model

The 9-level general circulation model, with the upper boundary of 50 mb, is a modification of the earlier 6- and 12-level versions used at UCLA. Two major design changes have been made in an effort to improve the model: (1) a potential enstrophy conserving scheme in the equation of motion has replaced the previous scheme which only conserved enstrophy for nondivergent flow, and (2) the treatment of the planetary boundary layer has been modified by making the predicted planetary boundary layer top a coordinate surface. Experiments with idealized steep mountains have been made to test each of the major modifications, and the model is now ready for general circulation simulation experiments.

Suarez, M. J.↗

The Seasat scanning multichannel microwave radiometer /SMMR/ - Instrument description and performance

The scanning multichannel microwave radiometer (SMMR) is an imaging 5-frequency radiometer flown on the Seasat and Nimbus-7 earth satellites launched in 1978. It measures dual-polarized microwave radiances from the earth's atmosphere and surface, primarily for the purpose of deriving global and nearly all-weather measurements of sea surface temperature, wind speed, and atmospheric liquid water and water vapor. This paper describes the SMMR instrument and its calibration, antenna pattern measurements, and data processing procedures. Analysis of early data from the Seasat SMMR shows that the expected engineering performance in flight was achieved, and the measurement of sea surface temperature and wind speed with accuracies of 1.5 K and 2 m/s, respectively, may be achievable once the geophysical data processing algorithms and analysis have been completed.

Njoku, E. G.↗