Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coronal density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Ultraviolet spectroscopy of planetary nebulae: Cosmological implications

Optical spectrophotometry of PW Vulpeculae (Nova Vul 1984 no. 1) is combined with ultraviolet data to estimate electron temperatures, densities, and abundances in the ejecta of this slow classical nova. The reddening, distance, and evolution of the ultraviolet spectrum are also discussed. Abundances are nearly solar, with the exception of Nitrogen, which is substantially higher. Although Neon has been reported to be enhanced in several novae, it does not seem to be the case for PW Vul. Photoionization model calculations are presented of the ejecta that give a reasonable match of the observed emission spectrum. A strong featureless continuum shows that very hot, presumably shock heated, gas plays a major role in determining the energetics of this nova. Emission from this hot gas is responsible for the ionization of the nebular gas. A calculation of the masses of both the hot coronal gas and the cooler nebular gas shows that the former may account for most of the mass of the ejecta.

Ferland, Gary J.↗

THE TEMPERATURE-DEPENDENT NATURE OF CORONAL DIMMINGS

The opening-up of the magnetic field during solar eruptive events is often accompanied by a dimming of the local coronal emission. From observations of filament eruptions recorded with the Extreme-Ultraviolet Imager on STEREO during 2008-2009, it is evident that these dimmings are much more pronounced in 19.5 nm than in the lower-temperature line 17.1 nm, as viewed either on the disk or above the limb. We conclude that most of the cooler coronal plasma is not ejected but remains gravitationally bound when the loops open up. This result is consistent with Doppler measurements by Imada and coworkers, who found that the upflow speeds in a transient coronal hole increased dramatically above a temperature of 1 MK; it is also consistent with the quasistatic behavior of polar plumes, as compared with the hotter interplume regions that are the main source of the fast solar wind. When the open flux reconnects and closes down again, the trapped plasma is initially heated to such high temperatures that it is no longer visible at Fe IX 17.1 nm. Correspondingly, 17.1 nm images show a dark ribbon or 'heat wave' propagating away from the polarity inversion line and coinciding with the brightened Fe XV 28.4 nm and Fe XII 19.5 nm post-eruptive loops and their footpoint areas. Such dark ribbons provide a clear example of dimmings that are not caused by a density depletion. The propagation of the 'heat wave' is driven by the closing-down, not the opening-up, of the flux and can be observed both off-limb and on-disk.

79 ASTRONOMY AND ASTROPHYSICS↗

THREE-DIMENSIONAL SIMULATIONS OF TEARING AND INTERMITTENCY IN CORONAL JETS

Observations of coronal jets increasingly suggest that local fragmentation and intermittency play an important role in the dynamics of these events. In this work, we investigate this fragmentation in high-resolution simulations of jets in the closed-field corona. We study two realizations of the embedded-bipole model, whereby impulsive helical outflows are driven by reconnection between twisted and untwisted field across the domed fan plane of a magnetic null. We find that the reconnection region fragments following the onset of a tearing-like instability, producing multiple magnetic null points and flux-rope structures within the current layer. The flux ropes formed within the weak-field region in the center of the current layer are associated with “blobs” of density enhancement that become filamentary threads as the flux ropes are ejected from the layer, whereupon new flux ropes form behind them. This repeated formation and ejection of flux ropes provides a natural explanation for the intermittent outflows, bright blobs of emission, and filamentary structure observed in some jets. Additional observational signatures of this process are discussed. Essentially all jet models invoke reconnection between regions of locally closed and locally open field as the jet-generation mechanism. Therefore, we suggest that this repeated tearing process should occur at the separatrix surface between the two flux systems in all jets. A schematic picture of tearing-mediated jet reconnection in three dimensions is outlined.

79 ASTRONOMY AND ASTROPHYSICS↗

The structure of the white-light corona and the large-scale solar magnetic field

The large-scale density structure of the white-light solar corona is compared to the organization of the solar magnetic field as identified by the appearance of neutral lines in the photosphere to examine whether any consistent relationship exists between the two. During the period covering Carrington rotations 1717 to 1736 brightness enhancements in the low corona tend to lie over the global neutral sheet identified in the photospheric magnetic field. The brightest of these enhancements are associated with neutral lines throguh active regions. These associations are not 1-1, but do hold both in stable and evolving conditions of the corona. A significant number of long-lived neutral lines is found, including filaments seen in H-alpha, for which there are not coronal enhancements.

Sime, D. G.↗

THERMAL NON-EQUILIBRIUM REVISITED: A HEATING MODEL FOR CORONAL LOOPS

The location and frequency of events that heat the million-degree corona are still a matter of debate. One potential heating scenario is that the energy release is effectively steady and highly localized at the footpoints of coronal structures. Such an energy deposition drives thermal non-equilibrium solutions in the hydrodynamic equations in longer loops. This heating scenario was considered and discarded by Klimchuk et al. on the basis of their one-dimensional simulations as incapable of reproducing observational characteristics of loops. In this paper, we use three-dimensional simulations to generate synthetic emission images, from which we select and analyze six loops. The main differences between our model and that of Klimchuk et al. concern (1) dimensionality, (2) resolution, (3) geometrical properties of the loops, (4) heating function, and (5) radiative function. We find evidence, in this small set of simulated loops, that the evolution of the light curves, the variation of temperature along the loops, the density profile, and the absence of small-scale structures are compatible with the characteristics of observed loops. We conclude that quasi-steady footpoint heating that drives thermal non-equilibrium solutions cannot yet be ruled out as a viable heating scenario for EUV loops.

79 ASTRONOMY AND ASTROPHYSICS↗

PW Vulpeculae - A nova with nearly solar abundances

Optical spectrophotometry of PW Vulpeculae is combined with ultraviolet data to estimate electron temperatures, densities, and abundances in the ejecta of this slow classical nova. The reddening, the distance, and the evolution of the ultraviolet spectrum are discussed. Abundances are nearly solar, with the exception of nitrogen, which is substantially higher. Although neon has been reported to be enhanced in several novae, it does not seem to be the case for PW Vul. Photoionization model calculations of the ejecta that give a reasonable match of the observed emission spectrum are presented. A strong featureless continuum shows that very hot, presumably shock-heated, gas plays a major role in determining the energetics of this nova. Emission from this hot gas is responsible for the ionization of the nebular gas. A calculation of the masses of both the hot coronal gas and the cooler nebular gas shows that the former may account for most of the mass of the ejecta.

Saizar, Pedro↗

Anatomy structure creation and editing using 3D implicit surfaces

Purpose: To accurately reconstruct, and interactively reshape 3D anatomy structures' surfaces using small numbers of 2D contours drawn in the most visually informative views of 3D imagery. The innovation of this program is that the number of 2D contours can be very much smaller than the number of transverse sections, even for anatomy structures spanning many sections. This program can edit 3D structures from prior segmentations, including those from autosegmentation programs. The reconstruction and surface editing works with any image modality. Methods: Structures are represented by variational implicit surfaces defined by weighted sums of radial basis functions (RBFs). Such surfaces are smooth, continuous, and closed and can be reconstructed with RBFs optimally located to efficiently capture shape in any combination of transverse (T), sagittal (S), and coronal (C) views. The accuracy of implicit surface reconstructions was measured by comparisons with the corresponding expert-contoured surfaces in 103 prostate cancer radiotherapy plans. Editing a pre-existing surface is done by overdrawing its profiles in image views spanning the affected part of the structure, deleting an appropriate set of prior RBFs, and merging the remainder with the new edit contour RBFs. Two methods were devised to identify RBFs to be deleted based only on the geometry of the initial surface and the locations of the new RBFs. Results: Expert-contoured surfaces were compared with implicit surfaces reconstructed from them over varying numbers and combinations of T/S/C planes. Studies revealed that surface-surface agreement increases monotonically with increasing RBF-sample density, and that the rate of increase declines over the same range. These trends were observed for all surface agreement metrics and for all the organs studied--prostate, bladder, and rectum. In addition, S and C contours may convey more shape information than T views for CT studies in which the axial slice thickness is greater than the pixel size. Surface editing accuracy likewise improves with larger sampling densities, and the rate of improvement similarly declines over the same conditions. Conclusions: Implicit surfaces based on RBFs are accurate representations of anatomic structures and can be interactively generated or modified to correct segmentation errors. The number of input contours is typically smaller than the number of T contours spanned by the structure.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Transient brightenings of interconnecting loops - Morphology of the sudden brightenings

Sudden brightenings of coronal loops that interconnect active regions are studied. Such brightenings often occur within one or two days after the birth of a new interconnecting loop, as well as in some old interconnections. The brightenings of young loops are obviously associated with the emergence of new magnetic flux near their footpoints, whereas some enhancements of old loops may be triggered by slowly moving disturbances propagating from other centers of activity. A few loop brightenings are associated with flares, but the loop does not brighten in consequence of the energy supply from the flare. Both the flare and the loop brightening are independent consequences of one common agent, presumably newly emerging flux. Temperatures in brightened loops are between 3 and 4 x 10 to the 6th K and densities are less than 2 x 10 to the 9th/cu cm, probably less than 5 x 10 to the 8th/cu cm in some old loops. The top part of a loop is the site of the most intense brightening in the initial phase of a loop enhancement. The most frequent lifetime of these brightenings is 6 to 7 hr.

Svestka, Z.↗

Measurements of outflow velocities in on-disk plumes from EIS/Hinode observations

The contribution of plumes to the solar wind has been subject to hot debate in the past decades. The EUV Imaging Spectrometer (EIS) on board Hinode provides a unique means to deduce outflow velocities at coronal heights via direct Doppler shift measurements of coronal emission lines. Such direct Doppler shift measurements were not possible with previous spectrometers. We measure the outflow velocity at coronal heights in several on-disk long-duration plumes, which are located in coronal holes (CHs) and show significant blueshifts throughout the entire observational period. In one case, a plume is measured four hours apart. The deduced outflow velocities are consistent, suggesting that the flows are quasi-steady. Furthermore, we provide an outflow velocity profile along the plumes, finding that the velocity corrected for the line-of-sight effect can reach 10 km s{sup –1} at 1.02 R {sub ☉}, 15 km s{sup –1} at 1.03 R {sub ☉}, and 25 km s{sup –1} at 1.05 R {sub ☉}. This clear signature of steady acceleration, combined with the fact that there is no significant blueshift at the base of plumes, provides an important constraint on plume models. At the height of 1.03 R {sub ☉}, EIS also deduced a density of 1.3 × 10{sup 8} cm{sup –3}, resulting in a proton flux of about 4.2 × 10{sup 9} cm{sup –2} s{sup –1} scaled to 1 AU, which is an order of magnitude higher than the proton input to a typical solar wind if a radial expansion is assumed. This suggests that CH plumes may be an important source of the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

SPECTROSCOPIC DIAGNOSTICS OF SOLAR MAGNETIC FLUX ROPES USING IRON FORBIDDEN LINE

In this Letter, we present Interface Region Imaging Spectrograph Fe xxi 1354.08 Å forbidden line emission of two magnetic flux ropes (MFRs) that caused two fast coronal mass ejections with velocities of ≥1000 km s{sup −1} and strong flares (X1.6 and M6.5) on 2014 September 10 and 2015 June 22, respectively. The extreme-ultraviolet images at the 131 and 94 Å passbands provided by the Atmospheric Imaging Assembly on board Solar Dynamics Observatory reveal that both MFRs initially appear as suspended hot channel-like structures. Interestingly, part of the MFRs is also visible in the Fe xxi 1354.08 forbidden line, even prior to the eruption, e.g., for the SOL2014-09-10 event. However, the line emission is very weak and that only appears at a few locations but not the whole structure of the MFRs. This implies that the MFRs could be comprised of different threads with different temperatures and densities, based on the fact that the formation of the Fe xxi forbidden line requires a critical temperature (∼11.5 MK) and density. Moreover, the line shows a non-thermal broadening and a blueshift in the early phase. It suggests that magnetic reconnection at that time has initiated; it not only heats the MFR and, at the same time, produces a non-thermal broadening of the Fe xxi line but also produces the poloidal flux, leading to the ascension of the MFRs.

79 ASTRONOMY AND ASTROPHYSICS↗

High sensitivity dynamic spectral search for flare star radio

We observed ten well-known flare stars with the Arcibo radio telescope at 1.4 GHz and 5 GHz, using a special observing technique to discriminate between real flares and radio freqeuncy interference. With a high sensitivity of 5.5 K/Jy at 1.4 GHz when averaged over a 50 MHz band, we are able to recognize flux enhancements as weak as approximately 6 mJy above the sky background variations. In about 85 hours of observation, about a dozen bursts were detected, only from AD Leo. All had flux densities lower than 70 mJy, which probably explains their lack of fine structures (except for the strongest one), such as were reported in the literature for stronger flares. Half of the bursts that we recorded are 100% circularly polarized, and half are not circularly polarized. Our results are a first attempt of reliable statistics on dMe flare rates at 1.4 GHz. The high brightness temperatures we infer for the observed bursts are interpreted in terms of coherent emission processes, either the cyclotron maser instability or plasma radiation. Efficiencies are comparable to those of solar or planetary radio emissions in the case of the cyclotron maser, and higher than the solar efficiency in the case of plasma radiation, with the caveat that there are great uncertainties in the coronal model and the source size.

Abada-Simon, M.↗

MHD Collimation Mechanism in Arched Flux Ropes Characterized Using Volumetric, Time-Dependent B -Vector Measurements

Laboratory measurements of B(x,t) in a volume enclosing portions of two arched flux ropes show flux rope collimation driven by gradients in axial current density. These measurements verify the three predictions of a proposed MHD collimation mechanism: (1) axial magnetic forces exist in current channels with spatially varying minor radius, (2) these forces can drive counterpropagating axial flows, and (3) this process collimates the flux rope. As a result, this mechanism may explain the axial uniformity of solar loops and is relevant to other systems with current channels of varying minor radius such as solar prominences and astrophysical jets.

36 MATERIALS SCIENCE↗

A test of Lee's quasi-linear theory of ion acceleration by interplanetary traveling shocks

Lee's (1983) quasi-linear theory of ion acceleration is tested using ISEE-3 measurements of the November 12, 1978 quasi-parallel interplanetary shock. His theory accounts with varying degrees of precision for the energetic proton spatial profiles; the dependence of the spectral index of the power law proton velocity distribution upon the shock compression ratio; the power law dependence of the upstream proton scalelength upon energy; the absolute magnitude of the upstream proton scale length; the behavior of the energetic proton anisotropy upstream and downstream of the shock; the behavior of the alpha-particle proton ratio upstream; the equality of the spatial scale lengths at the shock of the upstream waves and of the protons that resonate with them; and the dependence of the integrated wave energy density upon the proton energy density at the shock. However, the trace magnetic field frequency spectra disagree with his theory in two ways. The part of the spectrum that can resonate with the observed protons via first-order cyclotron resonance is flat, whereas Lee's theory predicts an f exp - 7/4 frequency dependence for the November 12 shock. Higher frequency waves, which could not resonate with the observed upstream protons, increased in amplitude as the shock approached, suggesting that they too were generated by the shock.

Kennel, C. F.↗

DERIVING THE PHYSICAL PARAMETERS OF A SOLAR EJECTION WITH AN ISOTROPIC MAGNETOHYDRODYNAMIC EVOLUTIONARY MODEL

The time-space evolution of a {approx}50 Degree-Sign wide coronal mass ejection (CME) on 2007 May 21 is followed remotely with the Solar Terrestrial Relations Observatory heliospheric imager HI-1, and measured in situ near Venus by the MESSENGER and Venus-Express spacecraft. The paper compares the observations of the CME structure with a simple, analytical magnetohydrodynamic force-free solution. It corresponds to a self-similar evolution, which gives a consistent picture of the main spatial-temporal features for both remote and in situ observations. Our main findings are (1) the self-similar evolution allows us to map the CME bright front into about 1/3 of the whole interplanetary counterpart of the coronal mass ejection (ICME, i.e., corresponding to the in situ observed passage of the plasma and magnetic field structure), in good quantitative agreement with the imaging measurements, (2) the cavity following the CME front maps into the rest of the ICME structure, 80% or more of which is consistent with a force free, cylindrically shaped flux rope, and (3) time and space conditions constrain the translational speed of the FR center to 301 km s{sup -1}, and the expansion speed of the FR core to 26 km s{sup -1}. A careful determination of the ICME cross-section and volume allows us to calculate the mass of the CME bright region (4.3 {+-} 1.1 10{sup 14} g) from the in situ measurements of the proton number density, which we assume to be uniform inside the bright region, of excellent agreement with the value estimated from the SECCHI HI-1 observations for the same structure. We provide model estimates for several global parameters including FR helicity ({approx}2 Multiplication-Sign 10{sup 26} Weber{sup 2}).

79 ASTRONOMY AND ASTROPHYSICS↗

MEASURING THE MAGNETIC FIELD OF CORONAL MASS EJECTIONS NEAR THE SUN USING PULSARS

The utility of Faraday rotation to measure the magnetic field of the solar corona and large-scale transients within is a small, yet growing field in solar physics. This is largely because it has been recognized as a potentially valuable frontier in space weather studies, because the ability to measure the intrinsic magnetic field within coronal mass ejections (CMEs) when they are close to the Sun is of great interest for understanding a key element of space weather. Such measurements have been attempted over the last few decades using radio signals from artificial sources (i.e., spacecraft on the far side of the Sun), but studies involving natural radio sources are scarce in the literature. We report on a preliminary study involving an attempt to detect the Faraday rotation of a CME that passed in front of a pulsar (PSR B0950+08) in 2015 August. We combine radio measurements with those from a broadband visible light coronagraph, to estimate the upper limit of the magnetic field of the CME when it was in the corona. We find agreement between different approaches for obtaining its density, and values that are consistent with those predicted from prior studies of CME density close to the Sun.

79 ASTRONOMY AND ASTROPHYSICS↗

On absorption by hot interstellar gas. I - Forbidden Fe X 6375

The spectra of 32 stars have been observed in the region of the coronal forbidden Fe X 6375 line at detection limits near an equivalent width of 1 mA in the best cases. No absorption which can be attributed to Fe X ions in hot interstellar gas is seen in any of these spectra except one, in general agreement with predictions based on a three-phase model of the interstellar medium. Toward Cephei an absorption line is measured with an equivalent width of 8.1 + or - 2 mA, a width corresponding to 20 + or - 5 km/s or a temperature not greater than about (0.5 + or - 0.25) x 10 to the 6th K, and, if it is caused by Fe X ions, a radial velocity of -355 km/s. On that hypothesis, the hot interstellar gas constitutes at least 30 percent of the column density of gas along this light path. Six new telluric lines also are detected, and the 6376, 6379 A diffuse interstellar bands are observed toward all six appreciably reddened stars and one high-latitude star.

Hobbs, L. M.↗

Coronal bright points associated with minifilament eruptions

Coronal bright points (CBPs) are small-scale, long-lived coronal brightenings that always correspond to photospheric network magnetic features of opposite polarity. In this paper, we subjectively adopt 30 CBPs in a coronal hole to study their eruptive behavior using data from the Atmospheric Imaging Assembly (AIA) and the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory. About one-quarter to one-third of the CBPs in the coronal hole go through one or more minifilament eruption(s) (MFE(s)) throughout their lifetimes. The MFEs occur in temporal association with the brightness maxima of CBPs and possibly result from the convergence and cancellation of underlying magnetic dipoles. Two examples of CBPs with MFEs are analyzed in detail, where minifilaments appear as dark features of a cool channel that divide the CBPs along the neutral lines of the dipoles beneath. The MFEs show the typical rising movements of filaments and mass ejections with brightenings at CBPs, similar to large-scale filament eruptions. Via differential emission measure analysis, it is found that CBPs are heated dramatically by their MFEs and the ejected plasmas in the MFEs have average temperatures close to the pre-eruption BP plasmas and electron densities typically near 10{sup 9} cm{sup –3}. These new observational results indicate that CBPs are more complex in dynamical evolution and magnetic structure than previously thought.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure of ion acoustic solitons and shock waves in a two-component plasma.

Time-independent solitary waves and shocks are investigated in a two-component plasma using a fluid model and kinetic theory. It is found that very small concentrations of a light ion can drastically alter the structure, changing the potential maximum by an order of magnitude. For a fixed Mach number, a critical density ratio of light to heavy ions is found at which the potential maximum changes discontinuously from a value large enough to reflect the light ions to one which allows them to traverse the shock front and enter the downstream flow. The downstream oscillatory structure normally seen in a shock is completely quenched by dissipation due to light ion reflection at concentrations of 3-8% He in an Ar plasma for typical electron to ion temperature ratios and Mach number values.

White, R. B.↗