Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “circularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Impact of high-dose gamma-ray irradiation on electrical characteristics of N-polar and Ga-polar GaN p–n diodes

We investigate the impact of high-dose gamma-ray irradiation on the electrical performance of Ga-polar and N-polar GaN-based p-n diodes grown by metalorganic chemical vapor deposition. We compare the current density-voltage (J-V), capacitance-voltage (C-V), and circular transfer length method (CTLM) characteristics of the p-n diodes fabricated on Ga-polar and N-polar orientations before and after irradiation. The relative turn-on voltage increases for the Ga-polar diodes with increasing irradiation dose, while it increases initially and then starts to decrease for the N-polar diodes. The p-contact total resistance increases for Ga-polar and decreases for N-polar samples, which we attribute to the formation of point defects and additional Mg activation after irradiation. The J-V characteristics of most of the tested diodes recovered over time, suggesting the changes in the J-V characteristics are temporary and potentially due to metastable occupancy of traps after irradiation. X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL) measurements reveal the existence of different types of initial defects and surface electronic states on Ga-polar and N-polar samples. Gallium vacancies (V Ga ) are dominant defects in Ga-polar samples, while nitrogen vacancies (V N ) are dominant in N-polar samples. The presence of a higher concentration of surface states on Ga-polar surfaces compared to N-polar was confirmed by calculating the band bending and the corresponding screening effect due to opposite polarization bound charge and ionized acceptors at the surface. The difference in surface stoichiometry in these two orientations is responsible for the different behavior in electrical characteristics after gamma-ray interactions.

36 MATERIALS SCIENCE↗

Femtosecond photocurrents at the FeRh/Pt interface

Femtosecond laser excitations of FeRh/Pt bilayers launch an ultrafast pulse of electric photocurrents in the Pt-layer and subsequently result in the emission of electromagnetic radiation in the THz spectral range. Analysis of the THz emission as a function of the polarization of the femtosecond laser pulse, external magnetic field, sample temperature, and sample orientation shows that the photocurrent can emerge due to vertical spin pumping and photo-induced inverse spin–orbit torque at the FeRh/Pt interface. Additionally, the vertical spin pumping from FeRh into Pt does not depend on the polarization of light and originates from ultrafast laser-induced demagnetization of the ferromagnetic phase of FeRh. The photo-induced inverse spin–orbit torque at the FeRh/Pt interface can be described in terms of a helicity-dependent effect of circularly polarized light on the magnetization of the ferromagnetic FeRh and the subsequent generation of a photocurrent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First coupled GENE–XGC microturbulence simulations

Covering the core and the edge region of a tokamak, respectively, the two gyrokinetic turbulence codes Gyrokinetic Electromagnetic Numerical Experiment (GENE) and X-point Gyrokinetic Code (XGC) have been successfully coupled by exchanging three-dimensional charge density data needed to solve the gyrokinetic Poisson equation over the entire spatial domain. Certain challenges for the coupling procedure arise from the fact that the two codes employ completely different numerical methods. This includes, in particular, the necessity to introduce mapping procedures for the transfer of data between the unstructured triangular mesh of XGC and the logically rectangular grid (in a combination of real and Fourier space) used by GENE. Constraints on the coupling scheme are also imposed by the use of different time integrators. First, coupled simulations are presented. We have considered collisionless ion temperature gradient turbulence, in both circular and fully shaped plasmas. Coupled simulations successfully reproduce both GENE and XGC reference results, confirming the validity of the code coupling approach toward a whole device model. Here, many lessons learned in the present context, in particular, the need for a coupling procedure as flexible as possible, should be valuable to our and other efforts to couple different kinds of codes in pursuit of a more comprehensive description of complex real-world systems and will drive our further developments of a whole device model for fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sign reversal in magnetic field amplification by relativistic laser-driven microtube implosions

In this work, we demonstrate and explain the surprising phenomenon of sign reversal in magnetic field amplification by the laser-driven implosion of a structured target. Relativistically intense laser pulses incident on the outer surface of a microtube target consisting of a thin opaque shell surrounding a μm-scale cylindrical void drive an initial ion implosion and later explosion capable of generating and subsequently amplifying strong magnetic fields. While the magnetic field generation is enhanced and spatially smoothed by the application of a kilotesla-level seed field, the sign of the generated field does not always follow the sign of the seed field. One unexpected consequence of the amplification process is a reversal in the sign of the amplified magnetic field when, for example, the target outer cross section is changed from square to circular. Using 2D particle-in-cell simulations, we demonstrate that sign reversal is linked to the stability of the surface magnetic field of opposite sign from the seed, which arises at the target inner surface during laser irradiation. The stability of the surface magnetic field and, consequently, the sign of the final amplified field depend sensitively on the target, laser, and seed magnetic field conditions, which could be leveraged to make laser-driven microtube implosions an attractive platform for the study of magnetic fields in high energy density plasma in regimes where sign reversal either is or is not desired.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Response of CR-39 nuclear track detectors to protons with non-normal incidence

This paper presents data from experiments with protons at non-normal incidence to CR-39 nuclear track detectors, analyzing the properties of detection efficiency, proton track diameter, track contrast, and track eccentricity. Understanding the CR-39 response to protons incident at an angle is important for designing charged particle detectors for inertial confinement fusion (ICF) applications. This study considers protons with incident energies less than 3 MeV. In this regime, an incident angle of 10° has no effect on CR-39 detection efficiency, and >85% detection efficiency is preserved up through 25° in the range of 1.0 MeV–2.1 MeV. For ICF applications, incident angles above 30° are deemed impractical for detector design due to significant drops in proton detection at all energies. We observe significant reductions in detection efficiency compared to theoretical predictions, particularly at low energies where proton tracks are etched away. The proton track diameter measured by the scan system is observed to decrease with higher incident angles. The track diameters are analyzed with two fitting models, and it is shown that the diameter–energy relation can be fit with the existing models at angles up to 30° . The optical contrast of the tracks tends to increase with the angle, meaning that the tracks are fainter, and a larger increase is observed for higher energies. Eccentricity, a measure of how elongated proton tracks are, increases with the incident angle and drops after the critical angle. The lowest energy tracks remain nearly circular even at higher angles.

47 OTHER INSTRUMENTATION↗

Dynamics of filaments during the edge-localized mode crash on NSTX

Edge localized modes (ELMs) are routinely observed in H-mode plasma regimes of the National Spherical Torus Experiment (NSTX). Due to the explosive nature of the instability, only diagnostics with high temporal and spatial resolution could provide a detailed insight into the dynamics associated with the ELMs. Gas-puff imaging at NSTX provides 2D measurements of the magnetic field aligned fluctuations (e.g., ELM filaments) in the scrape-off layer and at the plasma edge with 2.5 μs temporal and 10 mm optical resolution. A novel analysis technique was developed to estimate the frame-by-frame velocities and the spatial parameters of the dominant structures associated with the ELMs. The analysis was applied to single ELM events to characterize the ELM crash dynamics and then extended to a database of 159 ELM events. Statistical analysis was performed in order to find the characterizing dynamics of the ELM crash. The results show that on average, an ELM crash consists of a filament with a circular cross section, which is propelled outward with a characterizing peak radial velocity of ~3.3 km/s. The radial velocity was found to be linearly dependent on the distance of the filament from the separatrix, which has never been seen before. The ELM filament is characterized by propagation in the ion-diamagnetic direction poloidally with a peak velocity of 11.4 km/s. The ELM crash lasts for approximately 100 μs until the radial propulsion settles back to the pre-ELM level. Furthermore, the experimental findings were compared with analytical theory. Two possible mechanisms were identified for explaining the observations: the curvature interchange model and the current–filament interaction model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Guiding center and gyrokinetic orbit theory for large electric field gradients and strong shear flows

The guiding center and gyrokinetic theory of magnetized particle motion is extended to the regime of large electric field gradients perpendicular to the magnetic field. A gradient in the electric field directly modifies the oscillation frequency and causes the Larmor orbits to deform from circular to elliptical trajectories. In order to retain a good adiabatic invariant, there can only be strong dependence on a single coordinate at lowest order, so that resonances do not generate chaotic motion that destroys the invariant. When the gradient across magnetic flux surfaces is dominant, the guiding center drift velocity becomes anisotropic in response to external forces and additional curvature drifts must be included. The electric polarization density remains gyrotropic, but both the polarization and magnetization are modified by the change in gyrofrequency. The theory can be applied to shear flows that are even stronger than those observed in the edge transport barrier of a high-performance tokamak (H-mode) pedestal, even if the toroidal field is as small as or even smaller than the poloidal field. Yet, the theory retains a mathematical form that is similar to the standard case and can readily be implemented within existing simulation tools.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Correlation polarimeter-interferometer in the DIII-D tokamak

A correlation polarimeter-interferometer system has been developed for the DIII-D tokamak to detect small amplitude magnetic and density fluctuations. Two collinear, frequency-offset (5–15 MHz), orthogonally polarized (right- and left-handed, circularly polarized) electromagnetic waves at 650 GHz probing the plasma are used to detect the Faraday effect. A third, linearly polarized, electromagnetic wave serves as the local-oscillator to provide a measure of the line-averaged density. Correlation polarimetric measurement is accomplished by correlating the Faraday effect measured along the same line of sight using two independent detectors, whereas simultaneous correlation interferometric measurement is realized by correlating the line-averaged density measured at two different intermediate frequencies. The noise floor of the correlation polarimeter-interferometer has been demonstrated to be more than one order of magnitude lower than that of a standard polarimeter-interferometer measurement. Line-averaged correlation polarimetric-interferometric measurements in DIII-D H-mode plasmas show broadband (up to 750 kHz) magnetic and density fluctuations with amplitudes as low as 0.03 $Gauss$/$\sqrt{kHz}$ and 4 × 10 13 m –3 /$\sqrt{kHz}$, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gyrokinetic benchmark of the electron temperature-gradient instability in the pedestal region

Transport from turbulence driven by the electron temperature-gradient (ETG) instability is likely a major source of electron heat losses through the pedestal. Due to extreme gradients and strong shaping, ETG instabilities in the pedestal are distinct from those in the core, having, for example, multiple branches (toroidal and slab) in different wavenumber ranges. Due to its importance for pedestal transport, and its rather exotic character, a rigorous multi-code benchmarking exercise is imperative. In this work, we describe such an exercise, wherein we have carried out a detailed comparison of local linear pedestal ETG simulations using three gyrokinetic codes, CGYRO, GEM, and GENE and testing different geometric parameters (such as circular, Miller, and equilibrium EFIT geometry). The resulting linear frequencies, growth rates, and eigenfunctions show very good agreement between the codes in the three types of employed geometries. A nonlinear benchmark between CGYRO and GENE is also described, exhibiting good agreement (a maximum of 20% difference in the heat fluxes computed) at two locations in the pedestal. This lays the foundation for confidently modeling ETG turbulence in the pedestal

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A new and alternative look at nonlinear Alfvénic states

The formulation for studying nonlinear Alfvenic states, sustainable in Hall Magnetohydrodynamics (HMHD), becomes considerably simpler and more tractable when circularly polarized Beltrami vectors (the eigenstates of linear HMHD) are used as the basis functions. Nonlinear HMHD is, then, reduced to a rather simple looking set of scalar equations from which a model problem of three interacting Beltrami modes is formulated and analytically solved. The triplet interactions span a variety of familiar nonlinear processes leading to a redistribution as well as periodic exchange of energy. The energy exchange processes (whose strength is measured by an energy exchange/depletion time) will, perhaps, play a dominant role in determining the spectral content of an eventual Alfvenic state. All nonlinearities (sensitive functions of the interacting wave vectors) operate at par, and none is dominant over any substantial region of k-space; their intricate interplay prevents a “universal” picture from emerging; few generalizations on the processes that may, for instance, lead to a turbulent state, are possible. However, the theory can definitely claim: (1) the energy tends to flow from lower to higher k and (2) the higher k z (in the direction of the ambient magnetic field) components of a mode with a given k are depleted/oscillate faster—in some cases much faster. It is noteworthy that the mode coupling is the strongest (with the shortest depletion time) when the participating wave vectors are nearly perpendicular; perhaps, an expected consequence of the curl (cross product) nonlinearities. Numerical simulations will be necessary to help create a fully reliable picture.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulence-driven flow dynamics in general axisymmetric toroidal geometry

The present work gives the equations governing the generation of toroidally axisymmetric flows by turbulent Reynolds and Maxwell stresses in finite aspect ratio, general cross section tokamak plasmas. Inclusion of the divergence-free flow constraint in lowest order changes the time scale for evolution of the poloidal flows driven by turbulence by substantial factors. In the pedestal region for present day machines, comparing to earlier cylindrical models, the time scale evaluated using a large aspect ratio circular cross section model can be two orders of magnitude longer while the present, general geometry result can be about one order of magnitude longer. Inclusion of gyroviscosity in the calculation shows that the only lowest order radial velocity fluctuations that enter the problem are those due to fluctuating E×B flows. Toroidal and poloidal flow effects on the toroidally axisymmetric flows are inextricably coupled due to the neoclassical poloidal viscosity. Accordingly, the physics is inherently three dimensional and measurements of all three velocity components are required to obtain the information needed to quantitatively test the theory. The parallel and angular momentum equations for the lowest order, toroidally axisymmetric flows look like radial transport equations when the turbulence is included. The turbulence terms provide the radial transport fluxes. In standard neoclassical theory, the parallel flow equation is local on each flux surface; there is no radial derivative term. However, adding turbulence gives a way, in principle, for radial transport to lead to poloidal flows that deviate from the neoclassical prediction. As a result, the inclusion of the Maxwell stress provides a mechanism for MHD fluctuations to alter the toroidally axisymmetric flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of spatially resolved Rashba states on the surface of CH 3 NH 3 PbBr 3 single crystals

Hybrid organic-inorganic perovskites (HOIPs) are prime candidates for studying Rashba effects due to the heavy metal and halogen atoms in their crystal structure coupled with predicted inversion symmetry breaking. Nevertheless, observation of the Rashba effect in cubic CH 3 NH 3 PbBr 3 single crystals that possess bulk inversion symmetry is the subject of extensive debate due to the lack of conclusive experiments and theoretical explanations. In this work, we provide experimental evidence that Rashba state in cubic CH 3 NH 3 PbBr 3 single crystals at room temperature occurs exclusively on the crystal surface and depends on specific surface termination that results in local symmetry breaking. We demonstrate this using a suite of spatially resolved and depth-sensitive techniques, including circular photogalvanic effect, inverse spin Hall effect, and multiphoton microscopy, that are supported by first principle calculations. Our work suggests using surface Rashba states in these materials for spintronic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of entrance flow development on vortex formation and wall shear stress in a curved artery model

In this work, we numerically investigate the effect of entrance condition on the spatial and temporal evolution of multiple three-dimensional vortex pairs and the wall shear stress distribution in a curved artery model. We perform this study using a Newtonian blood-analog fluid subjected to a pulsatile flow with two inflow conditions. The first flow condition is fully developed while the second condition is undeveloped (i.e., uniform). We discuss the connection along the axial direction between regions of organized vorticity observed at various cross sections of the model and compare results between the different entrance conditions. We model a human artery with a simple, rigid 180° curved pipe with a circular cross section and constant curvature, neglecting the effects of taper, torsion, and elasticity. Numerical results are computed from a discontinuous high-order spectral element flow solver. The flow rate used in this study is physiological. We observe differences in secondary flow patterns, especially during the deceleration phase of the physiological waveform where multiple vortical structures of both Dean-type and Lyne-type coexist. The results indicate that decreased axial velocities under an undeveloped condition produce smaller secondary flows that ultimately inhibit growth of any interior flow vortices. We highlight the effect of the entrance condition on the formation of these structures and subsequent appearance of abnormal inner wall shear stresses, which suggest there may be a lower prevalence of cardiovascular disease in curved arteries where the flow is rather undeveloped—a potentially physiologically significant result to help understand the influence of blood flow development on disease.

60 APPLIED LIFE SCIENCES↗

Breakdown characteristics of deep-ultraviolet Al 0.6 Ga 0.4 N p-i-n avalanche photodiodes

A top-illuminated deep-ultraviolet Al 0.6 Ga 0.4 N p-i-n avalanche photodiode (APD) structure was designed and grown by metalorganic chemical vapor deposition on an AlN bulk substrate and on two different quality AlN/sapphire templates, and APDs were fabricated and tested. The APD devices with a circular diameter of 20 μm have demonstrated a distinctive reverse-bias breakdown behavior. The reverse breakdown voltage of the APDs is approximately -140 V, which corresponds to a breakdown electric field of 6–6.2 MV/cm for the Al 0.6 Ga 0.4 N material as estimated by Silvaco TCAD simulation. The APDs grown on the AlN bulk substrate show the lowest leakage current density of < 1 × 10 -8 A/cm 2 (at low reverse bias) compared to that of the devices grown on the AlN templates. From the photocurrent measurement, a maximum gain (current limited) of 1.2 × 10 4 is calculated. The average temperature coefficients of the breakdown voltage are negative for APD devices fabricated from both the AlN bulk substrate and the AlN templates, but these data show that the coefficient is the least negative for the APD devices grown on the low-dislocation-density AlN bulk substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin–orbit coupling proximity effect in MoS 2 /Fe 3 GeTe 2 heterostructures

Layered two-dimensional (2D) magnet/semiconductor heterostructures combine spintronic and optoelectronic properties of constituent materials, leading to new magneto-optical and magnetoelectric phenomena such as spontaneous emission of helical light and enhanced Zeeman splitting in single photon emission. While prior focus was mostly on the magnetic proximity effect, where properties of 2D magnets are transferred to nonmagnetic 2D materials, the inverse effect of 2D semiconductors altering 2D magnets is much less understood. Here, we fabricated and studied van der Waals (vdW) heterostructures of 2D magnet Fe 3 GeTe 2 (FGT) and 2D semiconductor MoS 2 . With reflectance magnetic circular dichroism, we found that the coercive field of MoS 2 -covered FGT reduces compared with uncovered FGT, agreeing well with our first-principles calculations. With its strong spin–orbit coupling (SOC), MoS 2 effectively alters the crystal field of the adjacent FGT and its magnetic anisotropy. Furthermore, an unconventional two-step hysteresis loop emerges in MoS 2 /FGT as a result of the superposition of two regions of FGT: at the interface and away from the interface. Our experimental elucidation of the SOC proximity effect that MoS 2 exerts on FGT provides fundamental understanding for the rational development of 2D magnet/semiconductor heterostructures.

2D materials↗

A resistive MHD model and simulation on plasma flow evolution in the presence of resonant magnetic perturbation in a tokamak

Nonaxisymmetric magnetic fields such as the intrinsic error field and the externally applied resonant magnetic perturbation (RMP) in a tokamak are known to influence the plasma momentum transport and flow evolution through plasma response, which itself strongly depends on the plasma flow as well. The nonlinear interaction between plasma response and flow has been previously modeled in the conventional error field theory with the “no-slip” condition, which has been recently extended to allow the “free-slip” condition. In this work, we further target this specific process and numerically simulate the nonlinear plasma response and flow evolution in the presence of a single-helicity RMP in a circular-shaped model tokamak configuration, based on the full resistive MHD model in the initial-value code NIMROD. Time evolution of the parallel (to k) flow or “slip frequency” profile and its asymptotic steady state obtained from the NIMROD simulations are compared with both conventional and extended nonlinear response theories. Here, k is the wave vector of the propagating island. Good agreement with the extended theory with free-slip condition has been achieved for the parallel flow profile evolution in response to RMP in all resistive regimes, whereas the difference from the conventional theory with the no-slip condition tends to diminish as the plasma resistivity approaches zero.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid-gyrokinetic simulations of low- n toroidal Alfvén eigenmodes using gKPSP

Here, we report a benchmark study of toroidal Alfvén eigenmode (TAE) simulation using the hybrid-gyrokinetic code GyroKinetic Plasma Simulation Program (gKPSP). A simulation capability for energetic particles based on the gyrokinetic δf method has been newly implemented in the gKPSP code. Benchmark simulations have been performed in both circular and realistic tokamak geometries. Good agreement has been found with previously reported results, demonstrating the new capability of the gKPSP code. We have investigated the effects of the distribution function on TAE stability by examining both isotropic and anisotropic slowing-down distributions of energetic particles. The slowing-down distribution produces a higher linear growth rate than a Maxwellian distribution, while a growth rate scan with the anisotropy shows an opposite trend. This can be attributed to competition between Landau damping and the linear drive, which are correlated with the fraction of resonant passing particles and their distribution in phase space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗