Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Vacancies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Site-specific surface reactivity on MgO for atomic layer deposition via selective hydration

Atomic layer deposition (ALD) is a powerful technique for thin film synthesis, offering atomic-scale precision and conformality. While ALD of MgO has been widely studied for applications in energy storage and microelectronics, its potential as surface on which deposition may be selective and defects repaired remains underexplored. Here, we present a combined theoretical and experimental investigation of MgO surface hydration and its implications for targeted ALD growth using water and dimethyl aluminum isopropoxide (DMAI) as reactants. We perform density functional theory (DFT) calculations to examine molecular and dissociative H 2 O adsorption on MgO (100) terraces and step-edge sites, including pristine surfaces and those with Mg/O vacancies. Reaction Gibbs free energies are calculated under various conditions to quantify surface reactivity. Our findings reveal facet- and defect-dependent hydration behaviors that align with experimental ALD growth trends on MgO (100). This study provides a molecular-level understanding of MgO surface chemistry critical for optimizing ALD processes for thin film growth and defect repair.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enhanced tunability of two-dimensional electron gas on SrTiO 3 through heterostructuring

Two-dimensional electron gases (2DEGs) on the SrTiO 3 (STO) surface or in STO-based heterostructures have exhibited many intriguing phenomena, which are strongly dependent on the 2DEG-carrier density. In this paper, we report that the tunability of the 2DEG-carrier density is significantly enhanced by adding a monolayer LaTiO 3 (LTO) onto the STO. Ultraviolet (UV) irradiation induced maximum carrier density of the 2DEG in LTO/STO is increased by a factor of ~4 times, compared to that of the bare STO. By oxygen gas exposure, it becomes 10 times smaller than that of the bare STO. This enhanced tunability is attributed to the drastic surface property change of a polar LTO layer by UV irradiation and O 2 exposure. This indicates that the 2DEG controllability in LTO/STO is more reliable than that on the bare STO driven by defects, such an oxygen vacancy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Defect formation and bending properties in graphite under He atom implantation investigated by molecular dynamics method

The formation and evolution of radiation defects and their effects on bending property of a single graphite under low energy helium atom implantation have been studied at atomic scale through molecular dynamics simulations. Various simple interstitial and vacancy defects are observed during the implantation process, which is a function of incident energy and cross section of helium-carbon interaction. Large defects are observed after continuous helium atom implantations. The effects of incident energy on the density, size and distribution of defects are analyzed in detail. Furthermore, the kinetic evolution process of radiation defects at different annealing temperatures have also been simulated, including the migration, aggregation, transformation, coalescence, and self-healing. Here, the large defect clusters, crossing several carbon layers, have been confirmed to be the primary reasons that affect the bending property of graphite. All these results provide a new understanding for further applications of graphite in nuclear reactors.

Atomic implantation↗
DOE OSTI2023

Thermodynamics and kinetics of Pb intercalation under graphene on SiC(0001)

SiC-supported graphene intercalated by a two-dimensional Pb monolayer can provide an appealing platform for spintronic applications. Such a monolayer structure is thermodynamically ultrastable, as observed in recent experiments. However, important fundamentals such as the structure of intercalated phases, locations of intercalated atoms, thermodynamic preference for intercalation, and intercalation pathways for this system have not yet been understood conclusively. Here, in this work, extensive density functional theory calculations are performed to assess Pb intercalation thermodynamics and kinetics under graphene on SiC(0001). We find that intercalation of isolated Pb atoms is strongly disfavored over adsorption on top of graphene. However, intercalation of complete Pb layers in the gallery between SiC and graphene buffer layer is strongly favored over supported Pb monolayers and moderately favored over formation of supported large three-dimensional Pb islands. We also find that initiation of intercalation either by individual Pb atoms directly penetrating graphene or by hopping under a static graphene step edge is energetically prohibitive at experimental temperatures. Consequently, more complex intercalation pathways are operative and further analyzed. We demonstrated that once an intercalated Pb monolayer forms around a graphene step edge, a facile Pb mass transport by Pb vacancy-mediated diffusion can be triggered for continued growth of the intercalated monolayer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Catalytic influence of light element incorporation in the lattice of palladium

The alloying of metals with foreign elements is a common approach for manipulating catalytic properties of active sites. For palladium-based catalysts, incorporation of light elements receives far less attention than Pd-metal alloys even though incorporated light element are catalytically significant. Due to their small size, light elements (H, B, C, and O) can occupy octahedral sites in Pd to form an interstitial phase, while palladium adjusts its lattice to accommodate the incorporation of larger light elements (S and P) to form distinct phases. The incorporated light element modifies the electronic structure of palladium, influencing the binding energy of substrates and reactive intermediates. Pd hydride and oxide often form in situ during hydrogenation or oxidation reactions, respectively, representing the (more, less) active phase of the catalyst. Further, the reactive interstitial hydrogen dissolved in Pd tends to hydrogenate reactants completely and unselectively. Pd oxide can be the active phase for oxidation reactions, and the incorporated oxygen or oxygen vacancies may participate in the reaction directly. Incorporated light elements change geometric aspects of Pd ensembles, serving the role of site blocking, ensemble isolation, or serve as an additional active site, endowing Pd with bifunctional character. We review the synthetic approaches for incorporating light elements into the palladium lattice. We summarize the catalytic influence of light element incorporation into the palladium lattice with respect to electronic and geometric modification, in situ incorporated hydrogen and oxygen, and discuss the influence of light element incorporation into Pd on specific reactions (i.e., selective hydrogenation, oxidation, electrocatalysis, and C—C cross coupling).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of surface acidity modulation on Pt/Al 2 O 3 single atom catalyst for carbon monoxide oxidation and methanol decomposition

With ideal metal utilization efficiency and homogeneous active sites, single atom catalysts (SACs) have attracted extensive attention in heterogeneous catalysis field. The performance of SACs is highly dependent on the local coordination environment of metal single atoms. However, few works reported the effect of surface acidity modification on the performance of SACs such as Pt SACs which have been widely studied nowadays. In this work, a Pt/Al 2 O 3 SAC has been successfully prepared using a bayerite Al(OH) 3 as support through simple IWI method for Pt loading. Through post-modification of Pt/Al 2 O 3 with acidic WO 3 and basic MgO, the surface acidity of Pt/Al 2 O 3 was tuned. Here, activity of CO oxidation and methanol decomposition on the modified catalysts has been evaluated. It was found that the catalytic performance was highly related to the surface acidity of Pt SACs. Basic MgO modified Pt/Al 2 O 3 performed better in CO oxidation under the reaction condition with H 2 O. Acidic WO 3 modified Pt/Al 2 O 3 showed superior activity in methanol decomposition. Detailed characterization and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) study suggested that the positive H 2 O effect on CO oxidation was due to the mitigated formation of bicarbonate species on Pt/Al 2 O 3 and WO 3 /Pt/Al 2 O 3 catalysts and the promoted desorption of carbonate species from MgO/Pt/Al 2 O 3 . The superior methanol decomposition performance on WO 3 /Pt/Al 2 O 3 was owing to its abundant oxygen vacancies and high resistance to carbonate accumulation. This study highlights the importance of surface acidity modulation of Pt SACs in heterogeneous catalysis and suggests that fine-tuning the surface acidity can be an effective strategy in new SACs development.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reduction kinetics of hercynite redox materials for solar thermochemical water splitting

Solar thermochemical water splitting (STWS) using a hercynite redox cycle is a promising technology for producing renewable H 2 . Here, the reduction kinetics of hercynite (FeAl 2 O 4 ) is evaluated using thermogravimetric and XRD analyses. The results indicate that as-prepared hercynite materials undergo reduction via two different reaction mechanisms. The reaction first proceeds by a nucleation and growth mechanism (AE1), followed by a third-order kinetic model (F3). XRD analyses show the occurrence of superstoichiometric oxygen in the spinel structure of FeAl 2 O 4+δ in the second reaction mechanism, which indicates the formation of cationic vacancies. TGA and XRD analyses confirm that hercynite maintains its spinel structure when the materials are thermally reduced and oxidized with steam. Differential scanning calorimetry (DSC) performed on FeAl 2 O 4 particles shows two heats of reaction in agreement with the two observed mechanisms. This is the first kinetics study to report on the thermal reduction of hercynite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanistic understanding of support effect on the activity and selectivity of indium oxide catalysts for CO 2 hydrogenation

Herein we present a mechanistic study on the support effect (ZrO 2 and CeO 2 ) of In 2 O 3 catalysts in CO 2 hydrogenation by a combined experimental and computational approach. Kinetic experiments and surface characterization suggested that the activity of In 2 O 3 catalysts cannot be simply correlated with the abundance of surface oxygen vacancies (O v ) formed by either H 2 -reduction or thermal treatment, which has been frequently invoked in previous studies. The support effect should originate from the electronic interactions between In 2 O 3 and the support oxide, rather than geometric factors or the difference in the particle size of In 2 O 3 . Theoretical modelling revealed that surface O v facilitate the formation and stabilization of the formate (HCOO*) intermediate. While a carbonate-like structure is favored for CO 2 adsorption on CeO 2 -supported or unsupported In 2 O 3 catalysts, CO 2 tends to bind strongly in a bent configuration on the O v site at the In 2 O 3 -ZrO 2 interface. The distinct CO 2 adsorption structures on different supported In 2 O 3 catalysts may account for the different reaction energy profiles in the subsequent hydrogenation reactions, especially the rate-limiting step, i.e., hydrogenation of HCOO* to CH 2 O* and methoxy (CH 3 O*). The relatively higher methanol selectivity of In 2 O 3 catalyst supported on ZrO 2 with respect to that on CeO 2 are suggested to stem from the greater energy difference (Δ$E_a$) between the parallel hydrogenation and C-O bond cleavage of HCOO*, which leads to the formation of methanol and CO, respectively. We report this study underlines the important role of metal-oxide-interface in determining the catalytic behavior of oxide-supported In 2 O 3 catalysts in CO 2 conversion.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalyst for enhanced CO 2 -methanol conversion at low temperature and pressure

Cu-ZnO-Al 2 O 3 is the most widely applied catalyst for CO 2 hydrogenation to methanol. However, it is still a challenge to produce methanol using this catalyst under low-temperature (<250 °C) and low-pressure (<10 bar) conditions with desirable yield and selectivity. In this work, by tuning the experimental processing parameters such as solvent, loading amount, and annealing temperature, highly improved ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalysts have been successfully demonstrated. Here, by using organic solvent (N,N-dimethylformamide (DMF), acetone, or isopropanol) for dip-coating loading process instead of deionized (DI) water, Cu-ZnO-Al 2 O 3 nanocatalysts was comparatively better dispersed on the nanorod array support with populated and abundant active sites, thus enhancing the methanol yield. With the control of the loading amount and annealing temperature, finely distributed Cu nanoparticles were obtained on the ZnO nanorod surfaces to enhance the interactions between Cu and ZnO nanorod surfaces. Further improvement of the catalyst performance is demonstrated by tuning the reaction space velocity. At 200 °C and 10 bar conditions, the optimized catalyst achieved a methanol yield of 6.46 mol h –1 kg –1 with 100 % selectivity. The good stability after prolonged testing of the catalysts demonstrates the potential practical implementation. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements under the 1 bar reveal that the CO 2 hydrogenation to methanol on the ZnO nanoarray supported Cu-ZnO-Al 2 O 3 catalyst follows the CO reaction pathway, due to the surface oxygen vacancies on ZnO nanorods which facilitate CO 2 dissociation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Room temperature slot-die coated perovskite layer modified with sulfonyl-γ-AApeptide for high performance perovskite solar devices

Perovskite solar cells (PSCs) exhibited remarkable progress for small aperture area cells, however, the performance of its counterpart, large aperture area cells, lags due to non-uniform and defective perovskite layers. Here, we fabricate reproducible large area homogeneous perovskite films at room temperature and without controlling humidity (up to 40 % RH) with a slot die coater on a c-TiO 2 layer deposited using a large area chemical bath. A new artificial peptide – sulfonyl-γ-AApeptide (F-GLU-S) was employed to modify the slot-die coated perovskite surface, grain boundaries and electronic defects. The multi-functional F-GLU-S with carbonyl, carboxyl, sulfonyl, benzene, and chloro groups was capable of strongly interacting with the perovskite layer and repairing the uncoordinated Pb 2+ ions and halide vacancies. As a result, both the electron and hole densities of defects were significantly suppressed; consequently, the non-radiative recombination was effectively suppressed for the modified device which can be explicitly seen in the device performance where both V oc and FF of the modified device improved considerably. Therefore, F-GLU-S modified slot-die coated MAPbI 3 – based devices demonstrated outstanding performance of 21.44 % PCE with a V oc of 1.13 V, J sc of 24.64 cm –2 , and FF 76.99 %. Furthermore, F-GLU-S passivation impeded the infiltration of moisture and oxygen due to its hydrophobic nature and defect repair potential. As a result, the modified device retained above 92 % of its original PCE after 720 h in air (room temperature and 40–60 % RH).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Towards improved conversion of wet waste to jet fuel with atomic layer deposition-coated hydrodeoxygenation catalysts

The conversion of wet waste-derived volatile fatty acids into jet fuel-range hydrocarbons is a promising route for increasing the production of sustainable aviation fuel; however, the cost and moderate alkane selectivity of Pt-based hydrodeoxygenation catalysts present challenges for commercialization. Here, to address this, we used atomic layer deposition to apply TiO 2 overcoats to Pt/Al 2 O 3 catalysts and create new interface sites that exhibited 8 times higher site time yield of the desirable n-alkane product than uncoated catalyst. Through TPR/TPD, XPS, CO DRIFTS, and DFT calculations, we found that the increased selectivity of the ALD-coated catalyst was due to the creation of O vacancies at the Pt-TiO 2 interface under reducing conditions, resulting in new Ti 3+ acid sites near the active metal. Maximum conversion and alkane selectivity during HDO was achieved with an ALD-coated 0.5% wt Pt catalyst, indicating that TiO 2 ALD can be used to maximize the utility of precious-metal catalysts.

09 BIOMASS FUELS↗
DOE OSTI2024

Zero-strain high entropy spinel oxide (FeNiCuCrMn) 3 O 4 @rGO as high-performance anode for sodium ion battery

High entropy spinel oxides (HEOs), as a new type of anode material with at least five transition metal elements and high theoretical specific capacity, have enormous promise in sodium ion batteries (SIBs). However, the influence of different transition metal elements on the structure and electrochemical performances of HEOs is not clear. Here, in this study, the addition of Mn to HEO can increase the surface oxygen vacancy (O v ) concentration, shorten the band gap, and enhance the electrochemical performance of (FeNiCuCrMn) 3 O 4 @rGO. XPS results show (FeNiCuCrMn)3O4@rGO has the highest surface O v concentration. Ab initio calculations demonstrate that the indirect band gap of (FeNiCuCrMn)3O4@rGO is 0.068 eV. In situ X-ray diffraction and synchrotron X-ray absorption spectroscopy reveal that (FeNiCuCrMn) 3 O 4 @rGO exhibits a zero-strain characteristic with an inconsequential unit cell volume change of 0.2 %. Specifically, (FeNiCuCrMn) 3 O 4 @rGO as anode materials for SIBs show good cyclic stability (with a capacity retention of 84 % at 500 mA g −1 after 3000 cycles). Overall, this work provides a new direction for optimizing transition metal elements in HEOs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Entropy-defect synergy for dual luminescence mechanism in spinel: Time-resolved anti-counterfeiting and fingerprint visualization

Multimodal luminescent materials, while promising for anti-counterfeiting, often lack dynamic time-dependent responses and controllable spatial distribution, limiting their encryption capabilities in the spatiotemporal dimension. Here, this work presents a coordinated control strategy based on entropy and defect engineering, and uses a backpropagation (BP) neural network for material screening to successfully prepare spinel Mg 0.8 (Fe 0.04 Co 0.04 Ni 0.04 Cu 0.04 Zn 0.04 )Cr 2 O 4 (MgA 5 CO) phosphors with time-dependent dynamic luminescence behavior. This phosphor simultaneously activated the d-d transition luminescence (∼618 nm) derived from Co 2+ /Cr 3+ and the defect luminescence (∼398 nm) related to zinc vacancies (V Zn ) in a single-phase solid solution. The phosphor exhibits a time-dependent color evolution from pink to purple under fixed-wavelength excitation, due to the different excited-state dynamics and decay lifetimes associated with the d-d transition and defect luminescence. Structural characterization and spectral analysis confirmed the existence of V Zn and its significant role in defect luminescence process. The fluorescent and dynamic luminescent properties of entropy-based spinel oxide enable its use in advanced anti-counterfeiting applications like fingerprint recognition and color-changing dedicated anti-counterfeiting mark, showing promise in high-end and time-dynamic anti-counterfeiting fields. This research not only developed a new type of fluorescent dynamic anti-counterfeiting material, but also provided a new idea for constructing advanced optical functional materials with multiple luminescence mechanisms.

Defect project↗
DOE OSTI2023

Atomic-scale identification of defects in alite

Crystallographic defects play a crucial role in cement hydration, with initial dissolution being dominated by the formation of etch pits that rely on the intersection of defects on surfaces. However, the defects present in cement particles have remained a mystery due to the lack of detailed direct observation at the atomic scale. In this study, we used scanning transmission electron microscopy to unravel the defects in alite particles at the single-atom level. Our observations identified different types of defects, including vacancies, doping, dislocations, rough surfaces, and grain boundaries. Atomic ordering in the alite crystal was further examined based on our single-atom recognition method. Our findings indicate that defects in cement particles may serve as reactive sites during the early hydration stage, facilitating the initial dissolution and providing nucleation sites for hydration products. Finally, this work provides insights into cement defect formation at the single-atom level and offers new opportunities in tuning the hydration process through defect engineering of cement particles.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Facet-dependent strong metal-support interactions control the C–O bond activation

Reducible metal oxides are selective and effective for C–O bond scission of hydrodeoxygenation reactions via the reverse Mars-van Krevelen mechanism. Creating efficient redox centers while minimizing metal surfaces leads to highly selective catalysts. Single noble metal atoms activate the surface M–O bond, but the catalyst activity is limited due to low loading. Here, we report that the strong metal-support interaction between Ir and CeO 2 is facet sensitive, and certain facets regulate the C–O bond cleavage. At 300°C reduction, Ir is mostly encapsulated on an octahedron by (111) facets but remains exposed by (110) facets. The former is selective, whereas the latter is not. In conclusion, density functional theory indicates that Ir encapsulation is favored on (111) under reaction conditions, and oxygen vacancies more readily form on encapsulated Ir than on pristine ceria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ab initio molecular dynamics simulation of Nd3+ incorporation in calcite

Trivalent rare-earth elements (REEs) readily incorporate in Ca-bearing minerals such as calcite (CaCO3), a phenomenon with important implications for the use of REEs as biogeochemical tracers as well as for environmental remediation. Despite substantial efforts, determining the incorporation modes of trivalent REEs in calcite has remained challenging due to their presence in multiple coordination environments. This is particularly problematic for the interpretation of extended X-ray absorption fine structure (EXAFS) spectroscopy. In this work, ab initio molecular dynamics (AIMD) simulations of Nd3+ incorporated in calcite were performed to resolve its incorporation modes. Nd3+ and Ca2+ have very similar ionic radii but the additional positive charge requires a charge compensation scheme (CCS). Five CCSs were considered in AIMD simulations, and the resulting atomic trajectories were then used to compute EXAFS spectra for direct fitting to a published experimental spectrum. The results of the fits indicated that Nd3+ incorporates at the Ca2+ site in calcite in a mixture of six- and seven-fold coordination environments and through three main incorporation modes: associated with a protonated nearest-neighbor Ca2+ vacancy, incorporated as NdOH2+, and charge compensated by a remote species (on the spatial scale probed by EXAFS). The incorporation of Nd3+ in calcite via multiple modes was consistent with previous work, but the AIMD-EXAFS approach allowed for resolving the nature, proportion, and structure of the different coordination environments.

Kerisit, Sebastien N.↗
DOE OSTI2022

Atomistically-informed modeling of point defect clustering and evolution in irradiated ThO 2

A cluster dynamics (CD) model has been developed to investigate the nucleation and growth of point defect clusters, i.e., interstitial prismatic loops and nanoscale and sub-nanoscale voids, in ThO 2 during irradiation by energetic particles. The model considers cluster off-stoichiometry due to the asymmetry of point defect generation on the O and Th sublattices under irradiation, as well as the point defect diffusivities and the defect binding energies to clusters. The energies were established using detailed molecular dynamics simulations considering the statistical variability of cluster configuration. A high-order adaptive time-integration has been used to solve the model. The predicted loop density and their average size is in good agreement with reported experimental observations for proton irradiated ThO 2 at 600°C. In conclusion, the model did not predict void evolution due to the sluggish kinetics of cation vacancies, explaining the absence of voids in proton irradiated ThO 2 (and other oxides) at relatively low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Reviewing computational studies of defect formation and behaviors in carbon fiber structural units

Solid-state carbon materials, such as graphite and graphene, are at the forefront of materials research because of their unique electronic, vibrational, and mechanical properties, leading to a broad range of potential and realized applications. One key application is their role as basic structural units of carbon fiber (CF), a lightweight alternative to steel. In CF, a delicate relationship exists between ultimate material strength and the atomic-scale density of defects contained at the inter- and intra-subunit levels. Computational studies provide insight into the stability of various types of defects that can form in these systems and connect with experimental observables such as bandgap and spectroscopic measurements. Therefore, the literature contains many computational studies that focus on changes induced by defects, including vacancies and Dienes transformations (Stone-Wales and Thrower defects). However, wide-ranging methods and cell sizes have been used, and property-specific information is often lacking. Furthermore, this review summarizes key literature findings, paying particular attention to changes in the electronic, vibrational, and mechanical properties induced by defects in graphitic materials relevant to CF.

36 MATERIALS SCIENCE↗