Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transportation Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Clearwater and Wineskin Sub-CAU Flow and Transport Models

The Clearwater (U12q) test of 1963 and the Wineskin (U12r) test of 1969 each have a 200 kt maximum announced yield (USDOE, 2000). Together, these two vertical shaft tests constitute about 25% of the total maximum yield on Rainier Mesa (Bowen et al., 2001). Their western location requires assessment of radionuclide flux to the Timber Mountain regional volcanic aquifer (Fenelon et al., 2008) or Redrock Valley Aquifer or “RVA” (NSTec, 2007). The Clearwater and Wineskin sub-CAU modeling objective is to generate realistic distributions of groundwater flow and radionuclide transport flux (realizations) using ranges of flow and transport properties bounded by data, flow calibration, and radionuclide concentration measurements. Key uncertainty variables include: (1) fraction of infiltration reaching the RVA, (2) fracture permeability and porosity in the TCU, (3) altered zone permeability and porosity enhancement, (4) hydraulic head in the RVA adjacent to the tests, (5) the radionuclide source term, and (6) transport mobility properties including Kd, tortuosity, and penetration depth of radionuclides into the matrix. Between 225 and 2160 realizations of radionuclide transport were generated for each of the 11 radionuclide sources (see Table 1), with the number of realizations depending on number of cases needed to address uncertainty variables - 5 flow cases, 3 transport mobility cases, 3 source term magnitudes, 3 to 5 source term spatial distributions, 1 to 4 melt glass partition fractions, and 1 to 3 melt glass dissolution fractions. Realizations exceeding 0.1 MCL to the RVA at any time between 0 and 1000 years post-test time were forwarded to the CAU model.

58 GEOSCIENCES↗

Constraining Data Mining with Physical Models: Voltage- and Oxygen Pressure-Dependent Transport in Multiferroic Nanostructures

Development of new generation electronic devices requires understanding and controlling the electronic transport in ferroic, magnetic, and optical materials, which is hampered by two factors. First, the complications of working at the nanoscale, where interfaces, grain boundaries, defects, and so forth, dictate the macroscopic characteristics. Second, the convolution of the response signals stemming from the fact that several physical processes may be activated simultaneously. Here, we present a method of solving these challenges via a combination of atomic force microscopy and data mining analysis techniques. Rational selection of the latter allows application of physical constraints and enables direct interpretation of the statistically significant behaviors in the framework of the chosen physical model, thus distilling physical meaning out of raw data. We demonstrate our approach with an example of deconvolution of complex transport behavior in a bismuth ferrite–cobalt ferrite nanocomposite in ambient and ultrahigh vacuum environments. Measured signal is apportioned into four electronic transport patterns, showing different dependence on partial oxygen and water vapor pressure. These patterns are described in terms of Ohmic conductance and Schottky emission models in the light of surface electrochemistry. Finally and furthermore, deep data analysis allows extraction of local dopant concentrations and barrier heights empowering our understanding of the underlying dynamic mechanisms of resistive switching.

36 MATERIALS SCIENCE↗

A low-cost transportable ground station for capture and processing of direct broadcast EOS satellite data

The Earth Observing System (EOS), part of a cohesive national effort to study global change, will deploy a constellation of remote sensing spacecraft over a 15 year period. Science data from the EOS spacecraft will be processed and made available to a large community of earth scientists via NASA institutional facilities. A number of these spacecraft are also providing an additional interface to broadcast data directly to users. Direct broadcast of real-time science data from overhead spacecraft has valuable applications including validation of field measurements, planning science campaigns, and science and engineering education. The success and usefulness of EOS direct broadcast depends largely on the end-user cost of receiving the data. To extend this capability to the largest possible user base, the cost of receiving ground stations must be as low as possible. To achieve this goal, NASA Goddard Space Flight Center is developing a prototype low-cost transportable ground station for EOS direct broadcast data based on Very Large Scale Integration (VLSI) components and pipelined, multiprocessing architectures. The targeted reproduction cost of this system is less than $200K. This paper describes a prototype ground station and its constituent components.

Davis, Don↗

Synthesized voice approach callouts for air transport operations

A flight simulation experiment was performed to determine the effectiveness of synthesized voice approach callouts for air transport operations. Flight deck data was first collected on scheduled air carrier operations to describe existing pilot-not-flying callout procedures in the flight context and to document the types and amounts of other auditory cockpit information during different types of air carrier operations. A flight simulation scenario for a wide-body jet transport airline training simulator was developed in collaboration with a major U.S. air carrier and flown by three-man crews of qualified line pilots as part of their normally scheduled recurrent training. Each crew flew half their approaches using the experimental synthesized voice approach callout system (SYNCALL) and the other half using the company pilot-not-flying approach callout procedures (PNF). Airspeed and sink rate performance was better with the SYNCALL system than with the PNF system for non-precision approaches. For the one-engine approach, for which SYNCALL made inappropriate deviation callouts, airspeed performance was worse with SYNCALL than with PNF. Reliability of normal altitude approach callouts was comparable for PNF on the line and in the simulator and for SYNCALL in the simulator.

Simpson, C. A.↗

The Medical Science DMZ

Objective We describe use cases and an institutional reference architecture for maintaining high-capacity, data-intensive network flows (e.g., 10, 40, 100 Gbpsþ) in a scientific, medical context while still adhering to security and privacy laws and regulations. Materials and Methods High-end networking, packet filter firewalls, network intrusion detection systems. Results We describe a “Medical Science DMZ” concept as an option for secure, high-volume transport of large, sensitive data sets between research institutions over national research networks. Discussion The exponentially increasing amounts of “omics” data, the rapid increase of high-quality imaging, and other rapidly growing clinical data sets have resulted in the rise of biomedical research “big data.” The storage, analysis, and network resources required to process these data and integrate them into patient diagnoses and treatments have grown to scales that strain the capabilities of academic health centers. Some data are not generated locally and cannot be sustained locally, and shared data repositories such as those provided by the National Library of Medicine, the National Cancer Institute, and international partners such as the European Bioinformatics Institute are rapidly growing. The ability to store and compute using these data must therefore be addressed by a combination of local, national, and industry resources that exchange large data sets. Maintaining data-intensive flows that comply with HIPAA and other regulations presents a new challenge for biomedical research. Recognizing this, we describe a strategy that marries performance and security by borrowing from and redefining the concept of a “Science DMZ”—a framework that is used in physical sciences and engineering research to manage high-capacity data flows. Conclusion By implementing a Medical Science DMZ architecture, biomedical researchers can leverage the scale provided by high-performance computer and cloud storage facilities and national high-speed research networks while preserving privacy and meeting regulatory requirements.

97 MATHEMATICS AND COMPUTING↗

A Satellite-Derived Upper-Tropospheric Water Vapor Transport Index for Climate Studies

A new approach is presented to quantify upper-level moisture transport from geostationary satellite data. Daily time sequences of GOES-7 water vapor imagery were used to produce estimates of winds and water vapor mixing ratio in the upper-troposphere sensed by the 6.7-microns water vapor channel. The winds and mixing ratio values were gridded and then combined to produce a parameter called the Water Vapor Transport Index (WVTI) which represents the magnitude of the two dimensional transport of water vapor in the upper troposphere. Daily grids of WVTI, meridional moisture transport, mixing ratio, pressure and other associated parameters were averaged to produce monthly fields for June, July and August of 1987 and 1988 over the Americas and surrounding oceanic regions. The WVTI was used to compare upper-tropospheric moisture transport between the summers of 1987 and 1988, contrasting the latter part of the 1986/87 El Nino event and the La Nina period of 1988. A similar product derived from the NCEP reanalysis was used to help validate the index and understand interannual variability of moisture transport from the modeling perspective. Both datasets showed large upper-level water vapor transport associated with synoptic features over the Americas and with outflow from tropical convective systems. Minimal transport occurred over tropical and subtropical high pressure regions where winds were light. Index values from NCEP were 2-3 times larger than that determined from the GOES satellite This difference resulted from an over estimate of the zonal winds and upper-tropospheric moisture in the reanalysis model. A comparison of the satellite-derived monthly values between the summers of 1987 and 1988 provided some insight into the impact of the ENSO event on upper-level moisture and its transport during the period. During July 1987, a large portion of the tropics in the eastern Pacific Ocean and Caribbean Sea was dominated by strong vapor transport in excess of 5 g/kg/ms with relatively small amounts in the other months. In contrast, JJA 1988 showed an opposite trend with July 1988 being less dominated by tropical water vapor transport. The meridional transport of upper-level water vapor indicated significant poleward transport from the tropics to the higher latitudes. This transport favored the Southern Hemisphere with large transport occurring south of the ITCZ which extended across the eastern Pacific and northern South America. Zonally-averaged monthly transport values were shown to provide a simple way to quantify the monthly and interannual changes in water vapor transport. Zonally-averaged WVTI values peaked in the Southern Hemisphere subtropics during both Austral winters. In the tropics a single more pronounced peak located over the equator and south latitudes occurred in 1988 as opposed to a dual peak in 1987. The second peak around 20 deg.N latitude is consistent with findings of others where upper-tropospheric winds were noted to be stronger in this region during warm ENSO events. Zonally-averaged meridional transport was southward for all summer months and stronger in 1988. The asymmetric nature of the zonally-averaged meridional transport (more southerly water vapor transport) was enhanced during JJA 1998 thus indicating a stronger upper-level branch of the Hadley circulation during this notable strong La Nina period.

Jedlovec, Gary J.↗

Reactive transport modeling for supporting climate resilience at groundwater contamination sites

Abstract. Climate resilience is an emerging issue at contaminated sites and hazardous waste sites, since projected climate shifts (e.g., increased/decreased precipitation) and extreme events (e.g., flooding, drought) could affect ongoing remediation or closure strategies. In this study, we develop a reactive transport model (Amanzi) for radionuclides (uranium, tritium, and others) and evaluate how different scenarios under climate change will influence the contaminant plume conditions and groundwater well concentrations. We demonstrate our approach using a two-dimensional (2D) reactive transport model for the Savannah River Site F-Area, including mineral reaction and sorption processes. Different recharge scenarios are considered by perturbing the infiltration rate from the base case as well as considering cap-failure and climate projection scenarios. We also evaluate the uranium and nitrate concentration ratios between scenarios and the base case to isolate the sorption effects with changing recharge rates. The modeling results indicate that the competing effects of dilution and remobilization significantly influence pH, thus changing the sorption of uranium. At the maximum concentration on the breakthrough curve, higher aqueous uranium concentration implies that sorption is reduced with lower pH due to remobilization. To better evaluate the climate change impacts in the future, we develop the workflow to include the downscaled CMIP5 (Coupled Model Intercomparison Project) climate projection data in the reactive transport model and evaluate how residual contamination evolves through 2100 under four climate Representative Concentration Pathway (RCP) scenarios. The integration of climate modeling data and hydrogeochemistry models enables us to quantify the climate change impacts, assess which impacts need to be planned for, and therefore assist climate resiliency efforts and help guide site management.

54 ENVIRONMENTAL SCIENCES↗

Thermal Band Atmospheric Correction Using Atmospheric Profiles Derived from Global Positioning System Radio Occultation and the Atmospheric Infrared Sounder

This Rapid Prototyping Capability study explores the potential to use atmospheric profiles derived from GPS (Global Positioning System) radio occultation measurements and by AIRS (Atmospheric Infrared Sounder) onboard the Aqua satellite to improve surface temperature retrieval from remotely sensed thermal imagery. This study demonstrates an example of a cross-cutting decision support technology whereby NASA data or models are shown to improve a wide number of observation systems or models. The ability to use one data source to improve others will be critical to the GEOSS (Global Earth Observation System of Systems) where a large number of potentially useful systems will require auxiliary datasets as input for decision support. Atmospheric correction of thermal imagery decouples TOA radiance and separates surface emission from atmospheric emission and absorption. Surface temperature can then be estimated from the surface emission with knowledge of its emissivity. Traditionally, radiosonde sounders or atmospheric models based on radiosonde sounders, such as the NOAA (National Oceanic & Atmospheric Administration) ARL (Air Resources Laboratory) READY (Real-time Environmental Application and Display sYstem), provide the atmospheric profiles required to perform atmospheric correction. Unfortunately, these types of data are too spatially sparse and too infrequently taken. The advent of high accuracy, global coverage, atmospheric data using GPS radio occultation and AIRS may provide a new avenue for filling data input gaps. In this study, AIRS and GPS radio occultation derived atmospheric profiles from the German Aerospace Center CHAMP (CHAllenging Minisatellite Payload), the Argentinean Commission on Space Activities SAC-C (Satellite de Aplicaciones Cientificas-C), and the pair of NASA GRACE (Gravity Recovery and Climate Experiment) satellites are used as input data in atmospheric radiative transport modeling based on the MODTRAN (MODerate resolution atmospheric TRANsmittance) radiative transport software to separate out the atmospheric component of measured top of atmosphere radiance. Simulated water bodies across a variety of MODTRAN model atmospheres including desert, mid-latitude, tropical and sub-artic conditions provide test bed conditions. Atmospherically corrected radiance and surface temperature results were compared to those obtained using traditional radiosonde balloon data and models. In general, differences between the different techniques were less than 2 percent indicating the potential value satellite derived atmospheric profiles have to atmospherically correct thermal imagery.

Pagnutti, Mary↗

Learning and meta-learning of stochastic advection–diffusion–reaction systems from sparse measurements

Physics-informed neural networks (PINNs) were recently proposed in [18] as an alternative way to solve partial differential equations (PDEs). A neural network (NN) represents the solution, while a PDE-induced NN is coupled to the solution NN, and all differential operators are treated using automatic differentiation. Here, we first employ the standard PINN and a stochastic version, sPINN, to solve forward and inverse problems governed by a non-linear advection–diffusion–reaction (ADR) equation, assuming we have some sparse measurements of the concentration field at random or pre-selected locations. Subsequently, we attempt to optimise the hyper-parameters of sPINN by using the Bayesian optimisation method (meta-learning) and compare the results with the empirically selected hyper-parameters of sPINN. In particular, for the first part in solving the inverse deterministic ADR, we assume that we only have a few high-fidelity measurements, whereas the rest of the data is of lower fidelity. Hence, the PINN is trained using a composite multi-fidelity network, first introduced in [12], that learns the correlations between the multi-fidelity data and predicts the unknown values of diffusivity, transport velocity and two reaction constants as well as the concentration field. For the stochastic ADR, we employ a Karhunen–Loève (KL) expansion to represent the stochastic diffusivity, and arbitrary polynomial chaos (aPC) to represent the stochastic solution. Correspondingly, we design multiple NNs to represent the mean of the solution and learn each aPC mode separately, whereas we employ a separate NN to represent the mean of diffusivity and another NN to learn all modes of the KL expansion. For the inverse problem, in addition to stochastic diffusivity and concentration fields, we also aim to obtain the (unknown) deterministic values of transport velocity and reaction constants. The available data correspond to 7spatial points for the diffusivity and 20 space–time points for the solution, both sampled 2000 times. We obtain good accuracy for the deterministic parameters of the order of 1–2% and excellent accuracy for the mean and variance of the stochastic fields, better than three digits of accuracy. In the second part, we consider the previous stochastic inverse problem, and we use Bayesian optimisation to find five hyper-parameters of sPINN, namely the width, depth and learning rate of two NNs for learning the modes. Here, we obtain much deeper and wider optimal NNs compared to the manual tuning, leading to even better accuracy, i.e., errors less than 1% for the deterministic values, and about an order of magnitude less for the stochastic fields.

97 MATHEMATICS AND COMPUTING↗

Generation of discrete scattering cross sections and demonstration of Monte Carlo charged particle transport in the Milagro IMC code package

A new method for generating discrete scattering cross sections to be used in charged particle transport calculations is investigated. The method of data generation is presented and compared to current methods for obtaining discrete cross sections. The new, more generalized approach allows greater flexibility in choosing a cross section model from which to derive discrete values. Cross section data generated with the new method is verified through a comparison with discrete data obtained with an existing method. Additionally, a charged particle transport capability is demonstrated in the time-dependent Implicit Monte Carlo radiative transfer code package, Milagro. The implementation of this capability is verified using test problems with analytic solutions as well as a comparison of electron dose-depth profiles calculated with Milagro and an already-established electron transport code. An initial investigation of a preliminary integration of the discrete cross section generation method with the new charged particle transport capability in Milagro is also presented. (authors)

97 MATHEMATICS AND COMPUTING↗

Architecture options for the Manned Transportation Systems Study

The Manned Transpiration System (MTS) Study was undertaken to develop key data relative to the United States manned transportation system, and specifically, the next manned system we build. These data are being developed in the context of Earth-to-orbit architectures necessary to deliver all government payloads to low Earth orbit (LEO). Launch systems, transition between current and new systems, along with system functions (personnel and/or cargo to/from orbit) are presented. Several key considerations being debated today were used to aid our selection of Earth-to-orbit (ETO) architectures for evaluation. Other consideration s not being addressed in this initial effort that require additional study are identified Twenty-five launch systems were used to define a set of 18 architectures. These architectures are discussed in context with they key considerations being addressed in this study. Payload manufacturing ground rules are presented to provide an understanding of our approach in establishing flight rates from the MTS mission models. Furthermore, a discussion of manned system flight rates and relative personnel safety characteristics differences is presented. Comparative architecture results will not be available until May 1992.

M T Gaunce↗

Low Order Equivalent System Identification for the Tu-144LL Supersonic Transport Aircraft

Low order equivalent system models were identified from flight test data for the Tu-144LL supersonic transport aircraft. Flight test maneuvers were executed by Russian and American test Pilots flying the aircraft from Zhukovsky airfield outside Moscow, Russia. Flight tests included longitudinal and lateral / directional maneuvers at supersonic cruise flight conditions. Piloted frequency sweeps and multi-step maneuvers were used to generate data for closed loop low order equivalent system modeling. Model parameters were estimated using a flexible. high accuracy Fourier transform and an equation error / output error (EE/OE) formulation in the frequency domain. Results were compared to parameter estimates obtained using spectral estimation and subsequent least squares fit to frequency response data in Bode plots. Modeling results from the two methods agreed well for both a frequency sweep and multiple concatenated multi-step maneuvers. For a single multi-step maneuvers the EE/OE method gave a better model fit with improved prediction capability. A summary of closed loop low order equivalent system identification results for the Tu-144LL, including estimated parameters, standard errors, and flying qualities level predictions, were computed and tabulated.

Morelli, Eugene A.↗

SPRUCE Methane Transport in Plants at S1 Bog, Marcell Experimental Forest, Minnesota, 2017-2019

This data set contains measurements of methane (CH4) transport by plants (both ground-layer and trees) and diffusion, as well as whole-plot emissions, taken in September 2018 and June 2019 in S1 Bog outside of the SPRUCE (Spruce and Peatland Responses Under Changing Environments) experimental enclosures. Additionally, CH4 and carbon dioxide (CO2) stable isotope data in porewater and atmospheric emissions were taken in July 2017 in the SPRUCE enclosures to explore the relative magnitude of CH4 oxidation. Episodic ebullition rates for S1 Bog are taken from Gill et al. (2017). Methane transport is an important component of many ecosystem models of peatlands. The results were compared to two methane models that have been developed for the SPRUCE project, ELM-SPRUCE (Earth Land Model) and TECO_SPRUCE (Terrestrial ECOsystem model). This dataset contains six data files in comma separate (.csv) format. Additional metadata are provided: six data dictionaries and a file-level metadata file in comma separate (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗

Updates to Relevance Vector Machine: Multiclass Classification, Variable Selection, and Proof-of-Concept Application to Safeguards Fresh Fuel Verification using List-Mode Neutron Collar Data

To expand the capabilities of safeguards authorities to verify the integrity of fresh fuel assemblies, Oak Ridge National Laboratory has retrofit the existing electronics of the JCC-71 uranium neutron coincidence collar, which contains 18 3 He neutron detectors and an external 241 AmLi(α, n) neutron interrogation source arranged to surround a fresh nuclear fuel assembly. The new electronics system allows analysts to record list-mode neutron multiplicity data in addition to the singles and doubles rates that are currently measured. Based on previous proof-of-concept research, analysis of these new data will identify off-normal fuel configurations in an assembly and characterize or localize the specific partial fuel defects. The purpose of this report it to document the analysis algorithm development and then to demonstrate its capability for the safeguards verification of fresh fuel assemblies using list mode neutron collar data. To analyze the complex list-mode data collected with the upgraded uranium neutron collar, multivariate classification algorithms are being developed using a novel classification method, the relevance vector machine. This approach may be applied to multiclass problems to estimate the probability that test data belongs to one of many possible classes of data. In addition, our method identifies the most useful variables/channels for making predictions, which illuminates the basis for the model’s predictions, and this interpretability is largely unique among data analytics methods. Variable selection occurs during model training and parameter tuning and does not need any external hyperparameter tuning routines. Finally, we apply the modified relevance vector machine to a simulated dataset of list-mode neutron collar data generated with the radiation transport code MCNP. The method can correctly identify off-normal fuel configurations, categorize the data according to four fuel defect scenarios, and rank the channels in the data according to prediction utility. For nuclear safeguards applications, it is concluded that this method has the potential to increase the sensitivity and reliability to detect missing fuel rods from a standard 17 x 17 Pressurized Water Reactor (PWR) fresh fuel assembly. Within this analysis, “off-normal” (i.e., missing fuel rods) were correctly classified in 17 simulated test scenarios with one quarter (25%) of the fresh fuel rods missing using a training data set of 58 simulated measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Proceedings of the Workshop for Applied Nuclear Data Activities WANDA 2022

On February 28 – March 4, 2022, the Nuclear Data Interagency Working Group (NDIAWG) hosted the 5-day virtual Workshop for Applied Nuclear Data (WANDA2022) to facilitate interagency collaboration on nuclear data for applications. This year’s focus was nuclear data for space applications, but also included photon reactions and transport, reactions on unstable nuclei, and data adjustment topics. The annual WANDA workshops are planned by the Nuclear Data Working Group (NDWG) with the goal of assembling users and producers of nuclear data to provide input to identify and prioritize nuclear data needs and to suggest solutions to address those needs. The workshop consisted of talks by agency program managers, six topic focused road mapping sessions and a review of NDIAWG-funded projects. More than 350 attendees represented national laboratories, universities, and federal agencies, as well as international organizations and industry. The proceedings presented herein summarize the workshop’s content, highlight important outcomes, and document attendees’ recommendations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Studies in short haul air transportation in the California corridor: Effects of design runway length; community acceptance; impact of return on investment and fuel cost increases. Volume 2: Appendices

The development of a forecast model for short haul air transportation systems in the California Corridor is discussed. The factors which determine the level of air traffic demand are identified. A forecast equation for use in airport utilization analysis is developed. A mathematical model is submitted to show the relationship between population, employment, and income for indicating future air transportation utilization. Diagrams and tables of data are included to support the conclusions reached regarding air transportation economic factors.

Shevell, R. S.↗