Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Training Time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Systems Health Monitoring: Integrating FMEA into Bayesian Networks

The foreseeable high traffic density suggests that a large number of electric propulsion systems will enter the airspace, and that they will also operate at high frequency, e.g., large number of take offs and landings per unit time. The reliability of such critical systems is therefore key to ensure high safety standards in the low-altitude airspace. Diagnostic systems, which aim at identifying incipient faults, can mitigate unexpected failures or lower-than-expected reliability by performing early fault detection by monitoring the systems. A key element of fault diagnosis is fault detection and isolation (FDI), which complexity increases with the complexity of the system itself, namely the number of subsystems and components, interactions among sub-systems, and the number of sensors available. The proposed approach leverages combination of failure mode and effect analysis (FMEA) integrated with Bayesian networks, thus introducing dependability structures into a diagnostic framework to aid FDI. Faults and failure events from the FMEA are mapped within a Bayesian network, where network edges replicate the links embedded within FMEAs. The integrated framework enables the fault isolation process by identifying the probability of occurrence of specific faults or root causes given evidence observed through sensor signals. In this work, sub systems of Urban Air Mobility (UAM) type vehicle like avionics, structures, power-train etc. are taken into account to show the approach at the system level. This work integrates early design phase in the development of UAM type vehicles with diagnostic tools, which are often developed later in the product life-cycle, or retrofitted at a later time on systems. Failure mode and effect analysis (FMEA) derived for the system in the design phase is embedded within a Bayesian network (BN).

UAM↗
NASA NTRS2013

Robotics On-Board Trainer (ROBoT)

ROBoT is an on-orbit version of the ground-based Dynamics Skills Trainer (DST) that astronauts use for training on a frequent basis. This software consists of two primary software groups. The first series of components is responsible for displaying the graphical scenes. The remaining components are responsible for simulating the Mobile Servicing System (MSS), the Japanese Experiment Module Remote Manipulator System (JEMRMS), and the H-II Transfer Vehicle (HTV) Free Flyer Robotics Operations. The MSS simulation software includes: Robotic Workstation (RWS) simulation, a simulation of the Space Station Remote Manipulator System (SSRMS), a simulation of the ISS Command and Control System (CCS), and a portion of the Portable Computer System (PCS) software necessary for MSS operations. These components all run under the CentOS4.5 Linux operating system. The JEMRMS simulation software includes real-time, HIL, dynamics, manipulator multi-body dynamics, and a moving object contact model with Tricks discrete time scheduling. The JEMRMS DST will be used as a functional proficiency and skills trainer for flight crews. The HTV Free Flyer Robotics Operations simulation software adds a functional simulation of HTV vehicle controllers, sensors, and data to the MSS simulation software. These components are intended to support HTV ISS visiting vehicle analysis and training. The scene generation software will use DOUG (Dynamic On-orbit Ubiquitous Graphics) to render the graphical scenes. DOUG runs on a laptop running the CentOS4.5 Linux operating system. DOUG is an Open GL-based 3D computer graphics rendering package. It uses pre-built three-dimensional models of on-orbit ISS and space shuttle systems elements, and provides realtime views of various station and shuttle configurations.

Johnson, Genevieve↗
NASA NTRS1980

KU-Band rendezvous radar performance computer simulation model

The preparation of a real time computer simulation model of the KU band rendezvous radar to be integrated into the shuttle mission simulator (SMS), the shuttle engineering simulator (SES), and the shuttle avionics integration laboratory (SAIL) simulator is described. To meet crew training requirements a radar tracking performance model, and a target modeling method were developed. The parent simulation/radar simulation interface requirements, and the method selected to model target scattering properties, including an application of this method to the SPAS spacecraft are described. The radar search and acquisition mode performance model and the radar track mode signal processor model are examined and analyzed. The angle, angle rate, range, and range rate tracking loops are also discussed.

Griffin, J. W.↗
NASA NTRS1990

The eighth NASA total quality management accomplishments report, 1990

The eighth annual accomplishments report provides numerous examples of quality strategies that have proven effective and efficient in a time when cost reduction is critical. NASA's continuous improvement efforts can provide insight for others to succeed in their own endeavors. The report covers: top management leadership and support, strategic planning, focus on the customer, employee training and recognition, employee empowerment and teamwork, measurement and analysis, and quality assurance.

Source record↗
NASA NTRS1993

Evaluation of computer-aided instruction techniques for the crew interface coordination position

The Crew Interface Coordinator (CIC) is responsible for real-time voice and procedural communication between the payload crew on the orbiter and the payload operations team on the ground. This function is dedicated to science activities and operations, and may also include some responsibilities for crew training. CIC training at Marshall Space Flight Center (MSFC) consists of mission-independent training, mission simulations, and line-organization training. As identified by Schneider, the program provides very good generic training; however position-specific training may be obtained in a very unstructured way. A computer-based training system, identified as Mac CIC, is currently under development to address this issue. Mac CIC is intended to provide an intermediate level of training in order to prepare the CIC for the more intensive mission simulations. Although originally intended as an intelligent tutoring system, Mac CIC currently exists as a hypertext-based application. The objectives of this research is to evaluate the current system and to provide both recommendations and a detailed plan for Mac CIC's evolution into an intelligent tutoring system.

Moynihan, Gary P.↗
NASA NTRS2000

Optical Path Switching Based Differential Absorption Radiometry for Substance Detection

A system and method are provided for detecting one or more substances. An optical path switch divides sample path radiation into a time series of alternating first polarized components and second polarized components. The first polarized components are transmitted along a first optical path and the second polarized components along a second optical path. A first gasless optical filter train filters the first polarized components to isolate at least a first wavelength band thereby generating first filtered radiation. A second gasless optical filter train filters the second polarized components to isolate at least a second wavelength band thereby generating second filtered radiation. The first wavelength band and second wavelength band are unique. Further, spectral absorption of a substance of interest is different at the first wavelength band as compared to the second wavelength band. A beam combiner combines the first and second filtered radiation to form a combined beam of radiation. A detector is disposed to monitor magnitude of at least a portion of the combined beam alternately at the first wavelength band and the second wavelength band as an indication of the concentration of the substance in the sample path.

Sachse, Glen W.↗
NASA NTRS1994

A Compositional Relevance Model for Adaptive Information Retrieval

There is a growing need for rapid and effective access to information in large electronic documentation systems. Access can be facilitated if information relevant in the current problem solving context can be automatically supplied to the user. This includes information relevant to particular user profiles, tasks being performed, and problems being solved. However most of this knowledge on contextual relevance is not found within the contents of documents, and current hypermedia tools do not provide any easy mechanism to let users add this knowledge to their documents. We propose a compositional relevance network to automatically acquire the context in which previous information was found relevant. The model records information on the relevance of references based on user feedback for specific queries and contexts. It also generalizes such information to derive relevant references for similar queries and contexts. This model lets users filter information by context of relevance, build personalized views of documents over time, and share their views with other users. It also applies to any type of multimedia information. Compared to other approaches, it is less costly and doesn't require any a priori statistical computation, nor an extended training period. It is currently being implemented into the Computer Integrated Documentation system which enables integration of various technical documents in a hypertext framework.

Mathe, Nathalie↗
NASA NTRS1999

Non-Traditional Displays for Mission Monitoring

Advances in automation capability and reliability have changed the role of humans from operating and controlling processes to simply monitoring them for anomalies. However, humans are traditionally bad monitors of highly reliable systems over time. Thus, the human is assigned a task for which he is ill equipped. We believe that this has led to the dominance of human error in process control activities such as operating transportation systems (aircraft and trains), monitoring patient health in the medical industry, and controlling plant operations. Research has shown, though, that an automated monitor can assist humans in recognizing and dealing with failures. One possible solution to this predicament is to use a polar-star display that will show deviations from normal states based on parameters that are most indicative of mission health.

Trujillo, Anna C.↗
NASA NTRS2005

Optical path switching based differential absorption radiometry for substance detection

An optical path switch divides sample path radiation into a time series of alternating first polarized components and second polarized components. The first polarized components are transmitted along a first optical path and the second polarized components along a second optical path. A first gasless optical filter train filters the first polarized components to isolate at least a first wavelength band thereby generating first filtered radiation. A second gasless optical filter train filters the second polarized components to isolate at least a second wavelength band thereby generating second filtered radiation. A beam combiner combines the first and second filtered radiation to form a combined beam of radiation. A detector is disposed to monitor magnitude of at least a portion of the combined beam alternately at the first wavelength band and the second wavelength band as an indication of the concentration of the substance in the sample path.

Sachse, Glen W.↗
NASA NTRS2003

Optical path switching based differential absorption radiometry for substance detection

An optical path switch divides sample path radiation into a time series of alternating first polarized components and second polarized components. The first polarized components are transmitted along a first optical path and the second polarized components along a second optical path. A first gasless optical filter train filters the first polarized components to isolate at least a first wavelength band thereby generating first filtered radiation. A second gasless optical filter train filters the second polarized components to isolate at least a second wavelength band thereby generating second filtered radiation. A beam combiner combines the first and second filtered radiation to form a combined beam of radiation. A detector is disposed to monitor magnitude of at least a portion of the combined beam alternately at the first wavelength band and the second wavelength band as an indication of the concentration of the substance in the sample path.

Sachse, Glen W.↗
NASA NTRS2016

Exploration Clinical Decision Support System: Medical Data Architecture

The Exploration Clinical Decision Support (ECDS) System project is intended to enhance the Exploration Medical Capability (ExMC) Element for extended duration, deep-space mission planning in HRP. A major development guideline is the Risk of "Adverse Health Outcomes & Decrements in Performance due to Limitations of In-flight Medical Conditions". ECDS attempts to mitigate that Risk by providing crew-specific health information, actionable insight, crew guidance and advice based on computational algorithmic analysis. The availability of inflight health diagnostic computational methods has been identified as an essential capability for human exploration missions. Inflight electronic health data sources are often heterogeneous, and thus may be isolated or not examined as an aggregate whole. The ECDS System objective provides both a data architecture that collects and manages disparate health data, and an active knowledge system that analyzes health evidence to deliver case-specific advice. A single, cohesive space-ready decision support capability that considers all exploration clinical measurements is not commercially available at present. Hence, this Task is a newly coordinated development effort by which ECDS and its supporting data infrastructure will demonstrate the feasibility of intelligent data mining and predictive modeling as a biomedical diagnostic support mechanism on manned exploration missions. The initial step towards ground and flight demonstrations has been the research and development of both image and clinical text-based computer-aided patient diagnosis. Human anatomical images displaying abnormal/pathological features have been annotated using controlled terminology templates, marked-up, and then stored in compliance with the AIM standard. These images have been filtered and disease characterized based on machine learning of semantic and quantitative feature vectors. The next phase will evaluate disease treatment response via quantitative linear dimension biomarkers that enable image content-based retrieval and criteria assessment. In addition, a data mining engine (DME) is applied to cross-sectional adult surveys for predicting occurrence of renal calculi, ranked by statistical significance of demographics and specific food ingestion. In addition to this precursor space flight algorithm training, the DME will utilize a feature-engineering capability for unstructured clinical text classification health discovery. The ECDS backbone is a proposed multi-tier modular architecture providing data messaging protocols, storage, management and real-time patient data access. Technology demonstrations and success metrics will be finalized in FY16.

Biomedical support↗
NASA NTRSDate not supplied

Exploring Transfers Between Earth-Moon Halo Orbits via Multi-Objective Reinforcement Learning

Multi-Reward Proximal Policy Optimization, a multi-objective deep reinforcement learning algorithm, is used to examine the design space of low-thrust trajectories for a SmallSat transferring between two libration point orbits in the Earth-Moon system. Using Multi-Reward Proximal Policy Optimization, multiple policies are simultaneously and efficiently trained on three distinct trajectory design scenarios. Each policy is trained to create a unique control scheme based on the trajectory design scenario and assigned reward function: a unique combination of weights scaling competing objectives that guide the spacecraft to the target mission orbit, incentivize faster flight times, and penalize propellant mass usage. Then, the policies are evaluated on the same set of perturbed initial conditions in each scenario to generate the propellant mass usages, flight times, and state discontinuities from a reference trajectory for each control scheme. This solution space of low-thrust trajectories for a SmallSat is used to examine the multi-objective trade space for the trajectory design scenario. By autonomously constructing the solution space, insights into the required propellant mass, flight time, and transfer geometry are rapidly achieved.

Christopher J Sullivan↗
NASA NTRS2021

Exploring Transfers Between Earth-Moon Halo Orbits via Multi-Objective Reinforcement Learning

Multi-Reward Proximal Policy Optimization, a multi-objective deep reinforcement learning algorithm, is used to examine the design space of low-thrust trajectories for a SmallSat transferring between two libration point orbits in the Earth- Moon system. Using Multi-Reward Proximal Policy Optimiza- tion, multiple policies are simultaneously and efficiently trained on three distinct trajectory design scenarios. Each policy is trained to create a unique control scheme based on the trajectory design scenario and assigned reward function: a unique combination of weights scaling competing objectives that guide the spacecraft to the target mission orbit, incentivize faster flight times, and penalize propellant mass usage. Then, the policies are evaluated on the same set of perturbed initial conditions in each scenario to generate the propellant mass usages, flight times, and state discontinuities from a reference trajectory for each control scheme. This solution space of low-thrust trajectories for a SmallSat is used to examine the multi-objective trade space for the trajectory design scenario. By autonomously constructing the solution space, insights into the required propellant mass, flight time, and transfer geometry are rapidly achieved.

Mashiku, Alinda K.↗
NASA NTRS2022

Exploring Applications of Machine Learning for Wildfire Monitoring and Detection using Unmanned Aerial Vehicles

Wildfires are increasing in frequency and severity around the world, including the United States. The losses caused by wildfires could be mitigated if high-risk areas, hotspots, and flare-ups could be monitored continuously, such as through the use of Unmanned Aerial Vehicles (UAVs). This paper documents exploratory efforts using machine learning to determine efficient flight paths for UAVs and to detect wildfires using image classification. On path planning, three machine learning techniques—Genetic Algorithm, Simulated Annealing, and Dynamic Programming—were explored. Genetic Algorithm was found to be an effective approach for path planning for wildfire monitoring and surveillance by UAVs. For a scenario of 25 locations in a circular arrangement, the algorithm was able to return the optimal path. The accuracy and execution time was found to be sensitive to the algorithm hyperparameters selected, which was especially evident in scenarios with hundreds or thousands of locations. Simulated Annealing was also found to be an effective approach for UAV path planning, with a major benefit of avoiding getting trapped in local minima and being straightforward to implement. Like Genetic Algorithm, the performance of Simulated Annealing was also found to be sensitive to the algorithm hyperparameters selected. By comparison, Dynamic Programming guarantees optimality for any number of locations, but it was found to be less practical in terms of execution time for scenarios with more than about a couple dozen locations. On wildfire detection, image classification using deep learning with a convolutional neural network was explored. Transfer learning was found to be a useful technique to efficiently train deep learning models. Also, it was determined that GPU processing can increase training speed by an order of magnitude, which enables significantly faster development. For a validation test set of 500 images, there were only two false negatives and zero false positives. These results demonstrate that detecting wildfires in static cameras using machine learning is feasible and establish a baseline for using images captured by UAVs in flight for wildfire detection.

Wildfire management↗
NASA NTRS2000

Computer Modeling of Real-Time Dynamic Lighting

Space Station tasks involve procedures that are very complex and highly dependent on the availability of visual information. In many situations, cameras are used as tools to help overcome the visual and physical restrictions associated with space flight. However, these cameras are effected by the dynamic lighting conditions of space. Training for these is conditions is necessary. The current project builds on the findings of an earlier NRA funded project, which revealed improved performance by humans when trained with computer graphics and lighting effects such as shadows and glare.

Maida, James C.↗
NASA NTRS1996

Space Station Furnace Facility Management Information System (SSFF-MIS) Development

This report summarizes the chronology, results, and lessons learned from the development of the SSFF-MIS. This system has been nearly two years in development and has yielded some valuable insights into specialized MIS development. General: In December of 1994, the Camber Corporation and Science Applications International Corporation (SAIC) were contracted to design, develop, and implement a MIS for Marshall Space Flight Center's Space Station Furnace Facility Project. The system was to be accessible from both EBM-Compatible PC and Macintosh platforms. The system was required to contain data manually entered into the MIS as well as data imported from other MSFC sources. Electronic interfaces were established for each data source and retrieval was to be performed at prescribed time intervals. The SOW requirement that predominantly drove the development software selection was the dual-platform (IBM-PC and Macintosh) requirement. The requirement that the system would be maintained by Government personnel influenced the selection of Commercial Off-the-shelf software because of its inherent stability and readily available documentation and support. Microsoft FoxPro Professional 2.6 for Windows and Macintosh was selected as the development tool. This is a software development tool that has been in use for many years. It is stable and powerful. Microsoft has since released the replacement for this product, Microsoft Visual FoxPro, but at the time of this development, it was only available on the Windows platform. The initial contract included included the requirement for capabilities relating to the Work- and Organizational Breakdown Structures, cost (plan and actuals), workforce (plan and actuals), critical path scheduling, trend analysis, procurements and contracts, interface to manufacturing, Safety and Mission Assurance, risk analysis, and technical performance indicators. It also required full documentation of the system and training of users. During the course of the contract, the requirements for Safety and Mission Assurance interface, risk analysis, and technical performance indicators were deleted. Additional capabilities were added as reflected in the Contract Chronology below. Modification 4 added the requirement for Support Contractor manpower data, the ability to manually input data not imported from non-nal sources, a general 'health' indicator screen, and remote usage. Mod 6 included the ability to change the level of planning of Civil Service Manpower at any time and the ability to manually enter Op Codes in the manufacturing data where such codes were not provided by the EMPACS database. Modification 9 included a number of changes to report contents and formats. Modification 11 required the preparation of a detailed System Design Document.

Meade, Robert M.↗
NASA NTRS1971

The reduction of a ""safety catastrophic'' potential hazard: A case history

A worst case analysis is reported on the safety of time watch movements for triggering explosive packages on the lunar surface in an experiment to investigate physical lunar structural characteristics through induced seismic energy waves. Considered are the combined effects of low pressure, low temperature, lunar gravity, gear train error, and position. Control measures constitute a seal control cavity and design requirements to prevent overbanking in the mainspring torque curve. Thus, the potential hazard is reduced to safety negligible.

Joseph P. Jones↗
NASA NTRS1979

Feature selection via entropy minimization: An example using LANDSAT satellite data

The author has identified the following significant results. The minimum entropy model may provide several useful advantages over traditional techniques for processing LANDSAT data. Total computer time to conduct a complete pattern recognition process is reduced. Subjective (transformed image), as well as statistically derived information is made available to the analyst/user much earlier in the analysis process. A rapid feedback loop in which numerous training set combinations can be tested for difference and representativeness is available. Additional tests of LANDSAT data processing using the minimum entropy model are clearly justified.

Zandonella, A.↗