Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sparse Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Urban land use of the Sao Paulo metropolitan area by automatic analysis of LANDSAT data

The separability of urban land use classes in the metropolitan area of Sao Paulo was studied by means of automatic analysis of MSS/LANDSAT digital data. The data were analyzed using the media K and MAXVER classification algorithms. The land use classes obtained were: CBD/vertical growth area, residential area, mixed area, industrial area, embankment area type 1, embankment area type 2, dense vegetation area and sparse vegetation area. The spectral analysis of representative samples of urban land use classes was done using the "Single Cell" analysis option. The classes CBD/vertical growth area, residential area and embankment area type 2 showed better spectral separability when compared to the other classes.

Parada, N. D. J.↗
NASA NTRS2020

Regional Tropical Aboveground Biomass Mapping with L-Band Repeat-Pass Interferometric Radar, Sparse Lidar, and Multiscale Superpixels

We introduce a multiscale superpixel approach that leverages repeat-pass interferometric coherence and sparse AGB estimates from a simulated spaceborne lidar in order to extend the NISAR mission’s applicable range of aboveground biomass (AGB) in tropical forests. Airborne and spaceborne L-band radar and full-waveform airborne lidar data are used to simulate the NISAR and GEDI mission, respectively. In addition to UAVSAR data, we use spaceborneALOS-2/PALSAR-2 imagery with 14-day temporal baseline, which is comparable to NISAR’s 12-daybaseline. Our reference AGB maps are derived from the airborne LVIS data during the AfriSAR campaign for three sites (Mondah, Ogooue, and Lope). Each tropical site has mean AGB of at least 125 Mg/ha in addition to areas with AGB exceeding 700 Mg/ha. Spatially sampling from these LVIS-derived AGB reference maps, we approximate GEDI AGB estimates. To evaluate our methodology, we perform several different analyses. First, we partition each study site into low(≤100 Mg/ha) and high (>100 Mg/ha) AGB areas, in conformity with the NISAR mission requirement to provide AGB estimates for forests between 0 and 100 Mg/ha with a RMSE below 20 Mg/ha. In the low AGB areas, this RMSE requirement is satisfied in Lope and Mondah and it fell short of the requirement in Ogooue by less 3 Mg/ha with UAVSAR and 6 Mg/ha with PALSAR-2. We note that our maps have finer spatial resolution (50 m) than NISAR requires (1 hectare). In the high AGB areas, the normalized RMSE increases to 51% (i.e.,<90 Mg/ha), but with negligible bias for all three sites. Second, we train a single model to estimate AGB across both high and low AGB regimes simultaneously and obtain a normalized RMSE that is<60% (or<100 Mg/ha). Lastly, we show the use of both (a) multiscale superpixels and (b) interferometric coherence significantly improves the accuracy of the AGB estimates. The InSAR coherence improved the RMSE by approximately 8% at Mondah with both sensors, lowering the RMSE from 59 Mg/ha to 47.4 Mg/h with UAVSAR and from 57.1 Mg/ha to 46 Mg/ha. This work illustrates one of the numerous synergistic relationships between the spaceborne lidars, such as GEDI, with L-band SAR, such as PALSAR-2 and NISAR, in order to produce robust regional AGB in high biomass tropical regions.

NISAR↗
NASA NTRS1994

Multifractal characterizations of nonstationarity and intermittency in geophysical fields: Observed, retrieved, or simulated

Geophysical data rarely show any smoothness at any scale, and this often makes comparison with theoretical model output difficult. However, highly fluctuating signals and fractal structures are typical of open dissipative systems with nonlinear dynamics, the focus of most geophysical research. High levels of variability are excited over a large range of scales by the combined actions of external forcing and internal instability. At very small scales we expect geophysical fields to be smooth, but these are rarely resolved with available instrumentation or simulation tools; nondifferentiable and even discontinuous models are therefore in order. We need methods of statistically analyzing geophysical data, whether measured in situ, remotely sensed or even generated by a computer model, that are adapted to these characteristics. An important preliminary task is to define statistically stationary features in generally nonstationary signals. We first discuss a simple criterion for stationarity in finite data streams that exhibit power law energy spectra and then, guided by developments in turbulence studies, we advocate the use of two ways of analyzing the scale dependence of statistical information: singular measures and qth order structure functions. In nonstationary situations, the approach based on singular measures seeks power law behavior in integrals over all possible scales of a nonnegative stationary field derived from the data, leading to a characterization of the intermittency in this (gradient-related) field. In contrast, the approach based on structure functions uses the signal itself, seeking power laws for the statistical moments of absolute increments over arbitrarily large scales, leading to a characterization of the prevailing nonstationarity in both quantitative and qualitative terms. We explain graphically, step by step, both multifractal statistics which are largely complementary to each other. The geometrical manifestations of nonstationarity and intermittency, 'roughness' and 'sparseness', respectively, are illustrated and the associated analytical (differentiability and continuity) properties are discussed. As an example, the two techniques are applied to a series of recent measurements of liquid water distributions inside marine stratocumulus decks; these are found to be multifractal over scales ranging from approximately 60 m to approximately 60 km. Finally, we define the 'mean multifractal plane' and show it to be a simple yet comprehensive tool with many applications including data intercomparison, (dynamical or stochastic) model and retrieval validations.

Davis, Anthony↗
DOE OSTI2020

Carbon Dioxide Fluxes to the Atmosphere From Waters Within Flooded Forests in the Amazon Basin

Aquatic habitats in the lowland Amazon emit large quantities of carbon dioxide (CO 2 ). However, information on CO 2 fluxes from seasonally flooded forests that constitute 80% of the surface area of aquatic environments in the lowland Amazon basin is sparse. We provide the first multi-year measurements of CO 2 exchanges within flooded forests of the central Amazon basin. Our approach combines measurement of dissolved CO 2 concentrations and fluxes between the water and atmosphere and ecological data. Although the rates of CO 2 emission by flooded forests are lower than other aquatic habitats, such as open waters in rivers and lakes, the combination of high CO 2 concentrations and a large area results in an appreciable regional out gassing of carbon dioxide from flooded forests. These fluxes can represent about half of the net primary production of flooded forests in the central Amazon basin.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A Remote Sensing Technique to Upscale Methane Emission Flux in a Subtropical Peatland

Abstract Quantification of methane (CH 4 ) gas emission from peat is critical to understand CH 4 budget from natural wetlands under a climate warming scenario. Previous studies have focused on prediction and mapping of CH 4 emission flux using process‐based models, while application of statistical‐empirical models for upscaling spatially sparse in situ measurements is scarce. In this study, we developed an empirical remote sensing upscaling approach to estimate CH 4 emission flux in the Everglades using limited in situ point‐based CH 4 emission flux measurements and Landsat data during 2013–2018. We spatially and temporally linked in situ data with Landsat surface reflectance based on temporally composite data sets and developed an object‐based machine learning framework to model and map CH 4 emission flux. An ensemble analysis of two machine learning models, k ‐Nearest Neighbor ( k ‐NN) and Support Vector Machine (SVM), shows that the upscaling approach is promising for predicting CH 4 emission flux with a R 2 of 0.65 and 0.87 based on a fivefold cross‐validation for a dry season and wet season estimation, respectively. We generated emission flux map products that successfully revealed the spatial and temporal heterogeneity of CH 4 emission within the dominant freshwater marsh ecosystem in the Everglades. We conclude that Landsat is promising for upscaling and monitoring CH 4 emission flux and reducing the uncertainty in emission estimates from wetlands.

Zhang, Caiyun↗
DOE OSTI2023

LCA-PyTorch

LCA-PyTorch is a code repository which contains PyTorch implementations of the Locally Competitive Algorithm (LCA), which is a biologically-plausible sparse coding model. LCA-PyTorch allows for the training, testing, and analysis of single layer LCA networks, multi-layer LCA networks, and hybrid LCA-based deep neural network models on a wide variety of applications and data types. LCA-PyTorch was developed in Python, a high-level programming language that takes advantage of the Python ecosystem of high-quality open-source packages for machine learning. LCA-PyTorch interfaces heavily with the open-source PyTorch Python package.

Teti, Michael↗
NASA NTRS2019

Numerical Reanalyses as a Gateway to Arctic Synthesis

Reanalyses are regularly gridded, retrospective depictions of the physical earth system, which are produced through the correction of a short-term forecast to available observations. In the Arctic, reanalyses are particularly well suited to marshal the sparse observing network to provide a plausible, multivariate representation of conditions. Atmospheric reanalyses such as MERRA-2 (NASA Modern-Era Retrospective analysis for Research and Applications, version 2) and ocean reanalyses such as SODA3 (Univ. Maryland Simple Ocean Data Assimilation version 3) are widely used in Arctic research for diagnostic studies of circulation, model evaluation, and as boundary conditions for a variety of process models. Here, we provide examples that illustrate the utility of reanalyses for providing information on the spatial and temporal scales of recent, rapid changes in the Arctic. Recent trends in Arctic surface temperatures, surface melt over Greenland and Arctic glaciers, and evolving freshwater conditions in the Arctic Ocean are examples where reanalyses can provide information that cannot easily be obtained via other means. These examples provide information on the scale, magnitude, and the uncertainty of recent Arctic change and provide a context for future scenarios. We further quantify uncertainties in key reanalyses variables and approaches for addressing these issues.

Arctic↗
DOE OSTI2024

Machine Learning for DUNE Supernova Trigger

One of the major scientific goals of the Deep Underground Neutrino Experiment (DUNE) is to detect and measure the neutrino flux originating from galactic core-collapse supernovae. These neutrinos provide an opportunity to study the end of life evolution of massive stars, and reveal information about the structure of core-collapse that is not visible in observations of the electromagnetic spectrum. Because of the rarity of these events, it is crucial that DUNE is able to detect supernova neutrino interactions when they occur. However, this will require sifting through a large quantity of data, motivating the development of a trigger algorithm to identify significant events and discard irrelevant data. Machine learning provides a potential approach to building this trigger. This project generates ADC and ground truth images of simulated neutrino interactions in a LArTPC detector to be used for machine learning, and uses them to train a sparse Convolutional Neural Network (C NN). The performance of this model when applied to the task of pixel classification based on interaction type is examined. This project found that the sparse CNN approach has the potential to have high accuracy in pixel classification, meaning it may be highly relevant to the development of a supernova neutrino trigger for the DUNE far detector.

Damish, S.↗
DOE OSTI2022

Nonconvex regularization for sparse neural networks

Convex ℓ 1 regularization using an infinite dictionary of neurons has been suggested for constructing neural networks with desired approximation guarantees, but can be affected by an arbitrary amount of over-parametrization. This can lead to a loss of sparsity and result in networks with too many active neurons for the given data, in particular if the number of data samples is large. As a remedy, in this paper, a nonconvex regularization method is investigated in the context of shallow ReLU networks: We prove that in contrast to the convex approach, any resulting (locally optimal) network is finite even in the presence of infinite data (i.e., if the data distribution is known and the limiting case of infinite samples is considered). Moreover, here we show that approximation guarantees and existing bounds on the network size for finite data are maintained.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1986

Rotational modulation in IUE spectra of cool dwarf chromospheres: Data analysis and period search techniques

The IUE spectra of bright F-K dwarfs were used to investigate rotational modulation in chromospheric and transition region emission lines, with Stellingwerf's phase dispersion minimization (PDM) technique as the basis of time series analysis. Sampling-related aliases are found to dominate the PDM spectra in these sparsely sampled, irregularly spaced time series. The star chosen to illustrate the techniques is epsilon Eridani, a young, chromospherically active K2 dwarf. Strong indications of a rotation period close to 2.8 days in epsilon Eridani from 2 seasons of observations, with evidence for the persistence in longitude of the active area(s) over several hundred rotation cycles are found.

Altner, B.↗
NASA NTRS2021

Probabilistic Machine Learning Estimation of Ocean Mixed Layer Depth from Dense Satellite and Sparse In-Situ Observations

The ocean mixed layer plays an important role in the coupling between the upper ocean and atmosphere across a wide range of time scales. Estimation of the variability of the ocean mixed layer is therefore important for atmosphere-ocean prediction and analysis. The increasing coverage of in situ Argo profile data allows for an increasingly accurate analysis of the mixed layer depth (MLD) variability associated with deviations from the seasonal climatology. However, sampling rates are not sufficient to fully resolve subseasonal (<90 day) MLD variability. Yet, many multivariate observations-based analyses include implicit modeled subseasonal MLD variability. One analysis method is optimal interpolation of in situ data, but the interior analysis can be improved by leveraging surface data with regression or variational approaches. Here, we demonstrate how machine learning methods and satellite sea surface temperature, salinity, and height facilitate MLD estimation in a pilot study of two regions: the mid-latitude southern Indian and the eastern equatorial Pacific Oceans. We construct multiple machine learning architectures to produce weekly 1/2° gridded MLD anomaly fields (relative to a monthly climatology) with uncertainty estimates. We test multiple traditional and probabilistic machine learning techniques to compare both accuracy and probabilistic calibration. We validate our methodology by applying it to ocean model simulations. We find that incorporating sea surface data through a machine learning model improves the performance of spatiotemporal MLD variability estimation compared to optimal interpolation of Argo observations alone. These preliminary results are a promising first step for the application of machine learning to MLD prediction.

Machine Learning↗
DOE OSTI2022

Bit-GraphBLAS: Bit-Level Optimizations of Matrix-Centric Graph Processing on GPU

In the graph data structure like adjacency matrix, the connectivity of two nodes can be sufficiently represented using only 1 bit, but they are generally treated as 32-bit full-precision in state-of-the-art graph frameworks to adopt common sparse format such as CSR. Meanwhile, bit-level parallelism has recently be explored to have high-performance potential and low storage requirement on GPUs with dense bit-tiles. To fill the gap, our solution is a hierarchical storage format that contains the bit-indexing base and dense bit-tile units. Inherently, the granularity of the bit-tile is an essential factor in achieving both storage compression and GPU parallelism. How to find a sweet spot that trades off between avoiding sparsity and exploiting is comprehensively researched in this work. In the experiment, we evaluate the proposed storage format and algorithms on modern generation GPUs, including Pascal and Volta, to figure out critical software co-designs in conjunction with existing hardware-specific optimization.

Chen, Jou-An↗
DOE OSTI2023

New approaches to an old problem: addressing spatial gaps in the World Stress Map

Abstract A well-recognized characteristic of the World Stress Map (WSM) database is the continued presence of large spatial gaps in the distribution of the data records despite the more than 40-year development history of the database. The current release has more than 30 000 high-quality (A–C) data records (often referred to as ‘stress indicators’), but while some continental areas (such as Australia) have seen a significant increase in spatial converge with the latest release, other continental regions (Africa, central Asia, most of South America) remain markedly sparse. In this contribution we (1) review the current state of the spatial distribution of stress indicators in the continental regions (above sea-level); (2) quantify the clustering of the stress indicators in the latest WSM release using the Hopkins statistic as a way to explore the current spatial distribution of the indicators and assess future WSM releases; and (3) present three approaches (joint inversion, seismic anisotropy and InSAR) that provide a way to fill in the gaps (both in the S Hmax orientation and principal stress magnitudes) in regions that lack active seismicity and where borehole drilling is cost prohibitive. These three approaches have the potential to guide procedures for improving a priori estimates of the ambient stress field in the Earth's crust and reduce the uncertainty in predicting both the magnitude and orientation of the principal tectonic stresses.

58 GEOSCIENCES↗
DOE OSTI2024

Weak-Form Latent Space Dynamics Identification

This software showcases the enhanced capabilities of the Latent Space Dynamics Identification (LaSDI) algorithm through the application of the weak form, resulting in WLaSDI. WLaSDI first compresses the data, then projects it onto test functions, and subsequently learns the local latent space models. Notably, WLaSDI demonstrates significantly improved robustness to noise. Using weak-form equation learning techniques, WLaSDI achieves local latent space modeling. Compared to the standard sparse identification of nonlinear dynamics (SINDy) used in LaSDI, the variance reduction of the weak form ensures robust and precise latent space recovery, enabling fast, robust, and accurate simulations. We demonstrate the efficacy of WLaSDI against LaSDI using several common benchmark examples, including viscid and inviscid Burgers', radial advection, and heat conduction. For instance, in 1D inviscid Burgers' simulations with up to 100% Gaussian white noise, WLaSDI maintains relative errors consistently below 6%, whereas LaSDI errors can exceed 10,000%. Similarly, in radial advection simulations, WLaSDI keeps relative errors below 16%, compared to potential errors of up to 10,000% with LaSDI. Additionally, WLaSDI achieves significant speedups, such as a 140X speedup in 1D Burgers' simulations compared to the corresponding full order model.

Choi, Youngsoo↗
DOE OSTI2021

City-Wide Distributed Roof-Top Photovoltaic System Adoption Forecast, Grid Impact Simulation, & Neighborhood Microgrid Contribution Assessment

The adoption of distributed photovoltaic (PV) systems grew significantly in recent years. Market projections anticipate future growth for both residential and commercial installations. To understand grid impacts associated with distributed PV, useful hosting capacity studies require accurate representations of the spatial distribution of PV adoptions. Prediction of PV locations and numbers depends on median income data, building use zoning maps, and permit records to understand existing trends and predict future adoption rates and locations throughout an entire city. Using the PV adoption data, advanced and realistic simulations were performed to capture the distributed PV impacts on the grid. Also, using graph theory community detection hundreds of neighborhood microgrids can be discovered for the entire city by identifying densely connected loads that are sparsely connected to other communities. Then, based on the PV adoption predictions, this work identified the contribution of PV within each of the newly discovered graph theory defined microgrid communities.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2017

The Effectiveness of Shrouding on Reducing Meshed Spur Gear Power Loss - Test Results

Gearbox efficiency is reduced at high rotational speeds due to windage drag and viscous effects on rotating, meshed gear components. A goal of NASA aeronautics rotorcraft research is aimed at propulsion technologies that improve efficiency while minimizing vehicle weight. Specifically, reducing power losses to rotorcraft gearboxes would allow gains in areas such as vehicle payload, range, mission type, and fuel consumption. To that end, a gear windage rig has been commissioned at NASA Glenn Research Center to measure windage drag on gears and to test methodologies to mitigate windage power losses. One method used in rotorcraft gearbox design attempts to reduce gear windage power loss by utilizing close clearance walls to enclose the gears in both the axial and radial directions. The close clearance shrouds result in reduced drag on the gear teeth, and reduced power loss. For meshed spur gears, the shrouding takes the form of metal side plates and circumferential metal sectors. Variably positioned axial and radial shrouds are incorporated in the NASA rig to study the effect of shroud clearance on gearbox power loss. A number of researchers have given experimental and analytical results for single spur gears, with and without shrouding. Shrouded meshed spur gear test results are sparse in the literature. Windage tests were run at NASA Glenn using meshed spur gears at four shroud configurations: unshrouded, shrouded (max. axial, max radial), and two intermediate shrouding conditions. Results are compared to available meshed spur gear power loss data analyses as well as single spur gear data/analyses. Recommendations are made for future work.

power loss↗
NASA NTRS2017

The Effectiveness of Shrouding on Reducing Meshed Spur Gear Power Loss Test Results

Gearbox efficiency is reduced at high rotational speeds due to windage drag and viscous effects on rotating, meshed gear components. A goal of NASA aeronautics rotorcraft research is aimed at propulsion technologies that improve efficiency while minimizing vehicle weight. Specifically, reducing power losses to rotorcraft gearboxes would allow gains in areas such as vehicle payload, range, mission type, and fuel consumption. To that end, a gear windage rig has been commissioned at NASA Glenn Research Center to measure windage drag on gears and to test methodologies to mitigate windage power losses. One method used in rotorcraft gearbox design attempts to reduce gear windage power loss by utilizing close clearance walls to enclose the gears in both the axial and radial directions. The close clearance shrouds result in reduced drag on the gear teeth and reduced power loss. For meshed spur gears, the shrouding takes the form of metal side plates and circumferential metal sectors. Variably positioned axial and radial shrouds are incorporated in the NASA rig to study the effect of shroud clearance on gearbox power loss. A number of researchers have given experimental and analytical results for single spur gears, with and without shrouding. Shrouded meshed spur gear test results are sparse in the literature. Windage tests were run at NASA Glenn using meshed spur gears at four shroud configurations: unshrouded, shrouded (max. axial, max. radial), and two intermediate shrouding conditions. Results are compared to available meshed spur gear power loss data analyses as well as single spur gear data analyses.

windage↗
NASA NTRS1994

Globular cluster photometry with the Hubble Space Telescope. 3: Blue stragglers and variable stars in the core of M3

This paper describes Hubble Space Telescope (HST)/Planetary Camera-I images of the core of the dense globular cluster M3 (NGC 5272). Stellar photometry in the F555W (V) and F785LP (I) bands, with a 1-sigma photometric accuracy of about 0.1 mag, has been used to construct color-magnitude diagrams of about 4700 stars above the main-sequence turnoff within r less than or approximately equal to 1 min of the cluster center. We have also analyzed archival HST F336W (U) images of M3 obtained by the Wide Field/Planetary Camera-I Instrument Definition Team. The UVI data are used to identify 28 blue straggler (BS) stars within the central 0.29 sq. arcmin. The specific frequency of BSs in this region of M3, N(sub BS)/N(sub V less than (V(HB)+2)) = 0.094 +/- 0.019, is about a factor of 2 - 3 higher than that found by Bolte et al. in a recent ground-based study of the same region, but comparable to that seen in the sparse outer parts of the same cluster and in HST observations of the core of the higher density cluster 47 Tuc. The BSs in M3 are slightly more centrally concentrated than red giant branch stars while horizontal branch stars are somewhat less concentrated red giants. The radial distribution of V-selected subgiant and turnoff stars is well fit by a King model with a core radius r(sub core) = 28 arcmin +/- 2 arcmin (90% confidence limits), which corresponds to 1.4 pc. Red giant and horizontal branch stars selected in the ultraviolet data (U less than 18) have a somewhat more compact distribution (r(sub core) = 22.5 arcmin). The HST U data consist of 17 exposures acquired over a span of three days. We have used these data to isolate 40 variable stars for which relative astrometry, brightnesses, colors, and light curves are presented. A Kolmogorov-Smirnov test indicates that, typically, the variability for each star is significant at the 95% level. We identify two variable BS candidates (probably of the SX Phe type), out of a sample of approximately 25 BSs in which variability could have been detected. Most of the variables are RR Lyrae stars on the horizontal branch. All of them have periods P greater than or approximately equal 8 h.

Guhathakurta, Puragra↗