Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solid State Lighting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Angular photonic band gap

We propose detailed numerical simulations of a class of material systems that strongly discriminate light based primarily on the angle of incidence, over a broad range of frequencies, and independent of the polarization. Unique properties of these systems emerge from investigating photonic crystals whose constituents have an anisotropic dielectric response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced electron capture and symmetrized carrier distribution in GaInN light-emitting diodes having tailored barrier doping

The confinement of electrons to the active region of GaInN light-emitting diodes(LEDs) is limited by the (i) inefficient electron capture into polar quantum wells, (ii) electron-attracting properties of electron-blocking layers (EBL), (iii) asymmetry in electron and hole transport, and (iv) unfavorable p-doping in the EBL for high Al content. To counteract these mechanisms, we employ tailored Si-doping in the quantum barriers (QBs). Experiments show a 37.5% enhancement in light-output power at high currents of one-QB-doped LEDs over all-QB-doped LEDs. These results are consistent with simulations showing that QB doping can be used to symmetrize the electron and hole distribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Amber-green light-emitting diodes using order-disorder Al x In 1-x P heterostructures

We demonstrate amber-green emission from Al x In 1– x P light-emitting diodes (LEDs) with luminescence peaked at 566 nm and 600 nm. The LEDs are metamorphically grown on GaAs substrates via a graded In y Ga 1– y As buffer layer and feature electron confinement based on the control of Al x In 1– x P CuPt atomic ordering. A control sample fabricated without order-disorder carrier confinement is used to illustrate device improvement up to a factor of 3 in light output due to confinement at drive currents of 40 A/cm 2 . The light output at room temperature from our Al x In 1– x P LED structure emitting at 600 nm is 39% as bright as a Ga x In 1– x P LED emitting at 650 nm.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Defect-reduction mechanism for improving radiative efficiency in InGaN/GaN light-emitting diodes using InGaN underlayers

The influence of a dilute In{sub x}Ga{sub 1-x}N (x ∼ 0.03) underlayer (UL) grown below a single In{sub 0.16}Ga{sub 0.84}N quantum well (SQW), within a light-emitting diode (LED), on the radiative efficiency and deep level defect properties was studied using differential carrier lifetime (DCL) measurements and deep level optical spectroscopy (DLOS). DCL measurements found that inclusion of the UL significantly improved LED radiative efficiency. At low current densities, the non-radiative recombination rate of the LED with an UL was found to be 3.9 times lower than the LED without an UL, while the radiative recombination rates were nearly identical. This suggests that the improved radiative efficiency resulted from reduced non-radiative defect concentration within the SQW. DLOS measurement found the same type of defects in the InGaN SQWs with and without ULs. However, lighted capacitance-voltage measurements of the LEDs revealed a 3.4 times reduction in a SQW-related near-mid-gap defect state for the LED with an UL. Quantitative agreement in the reduction of both the non-radiative recombination rate (3.9×) and deep level density (3.4×) upon insertion of an UL corroborates deep level defect reduction as the mechanism for improved LED efficiency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization of Photon and Electron Collection Efficiencies in Silicon Solar Microcells for Use in Concentration-Based Photovoltaic Systems

We show that ultrathin silicon solar microcells ($μ$-cells) afford a means to reduce semiconductor material consumption and can be integrated with concentration optics to improve their power density. A $μ$-cell design is described that optimizes electron and photon collection with enhanced efficiency for solar concentration applications. An interdigitated back contact (IBC) design improves carrier collection partially due to larger contact coverage while further enabling optimization of the μ-cell front surface. To do so, a silicon nitride antireflection thin film coating is utilized to enhance photon absorption and improve surface passivation. Performance of IBC $μ$-cells is compared to an optimized top contact design and improves μ-cell conversion efficiencies from 9.9 to 13.7%. Improvements at 1 Sun are amplified under concentration and increase power densities at 20 Suns to 346 from 192 mW cm-2 due to minimized series resistance. Benefits afforded by IBC $μ$-cells are exemplified following their integration into a dual concentrator system, affording photon collection capacities for direct and diffuse irradiance. A traditional lens concentrates direct light while a luminescent solar concentrator (LSC) collects diffuse photons otherwise not utilized by passive optics. Addition of the LSC increases maximum power densities on clear and cloudy days, providing concentration for the latter and further increasing the power density.

14 SOLAR ENERGY↗

CALiPER Exploratory Study: Recessed Troffer Lighting

This report describes an exploration of troffer lighting as used in office and classroom spaces, which was conducted by the CALiPER program. Twenty-four pairs of 2×2 and 2×4 troffers were procured anonymously, documented, tested for photometric and electrical performance, and installed in a mockup office space in Portland, Oregon. Three of the pairs were T8 fluorescent benchmark products, 12 were dedicated LED troffers, five were fluorescent troffers modified for LED lamps (sometimes referred to as "tubes"), and another four troffers were modified with LED retrofit kits. The modifications were performed by a commercial electrical contractor, following the instructions provided by the retrofit lamp or kit manufacturer. Once installed in the mockup facility, the converted luminaires were examined by a NRTL (Nationally Recognized Testing Laboratory) safety expert, who provided feedback on safety issues. In September 2012, a group of lighting designers, engineers, and facility managers were brought in to observe the LED luminaires in comparison to fluorescent benchmarks. This report documents performance in measures that go beyond illuminance values or luminaire efficacy. Dedicated LED troffers are ready to compete with fluorescent troffers in terms of efficacy (lumens per watt), and in many lighting quality issues such as glare, light distribution, visual appearance, and color quality. That is not to say that each one is stellar, but each one tested in this CALiPER study bested the fluorescent benchmarks in terms of efficacy, and almost all were rated highly in several categories -- only one luminaire of twelve performed consistently poorly.

CALiPER Program↗

Review – Quantum Dots and Their Application in Lighting, Displays, and Biology

In this review, we focus on the advancement of white light emitting nanocrystals, their usage as the emissive layer in LEDs and display backlights, and examine the increased efficiency and longevity of quantum dots based colored LEDs. In addition, we also explore recent discoveries on quantum dots as biological labels, dynamic trackers, and applications in drug delivery.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Spatially Resolved Energy Transfer in Patterned Colloidal Quantum Dot Heterostructures

Spatial uniformity is a key consideration in high-resolution displays and light-emitting structures fabricated from colloidal quantum dots (QDs). We report spatially and spectrally resolved transient photoluminescence measurements of laterally patterned QD heterostructures. We show, using a microcontact printing technique, that spatially uniform energy transfer can be achieved in a QD donor–acceptor bilayer system, highlighting the promising potential of colloidal QDs as flexible photonic components in next-generation optoelectronic technologies.

solar (photovoltaic), solid state lighting, photos↗

The energetics of lanthanum tantalate materials

Lanthanum tantalates are important refractory materials with application in photocatalysis, solid oxide fuel cells, and phosphors. Soft-chemical synthesis utilizing the Lindqvist ion, [Ta{sub 6}O{sub 19}]{sup 8-}, has yielded a new phase, La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2}. Using the hydrated phase as a starting material, a new lanthanum orthotantalate polymorph was formed by heating to 850 {sup o}C, which converts to a previously reported LaTaO{sub 4} polymorph at 1200 {sup o}C. The stabilities of La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2} (LaTa-OH), the intermediate LaTaO{sub 4} polymorph (LaTa-850), and the high temperature phase (LaTa-1200) were investigated using high-temperature oxide melt solution calorimetry. The enthalpy of formation from the oxides were calculated from the enthalpies of drop solution to be -87.1{+-}9.6, -94.9{+-}8.8, and -93.1{+-}8.7 kJ/mol for LaTa-OH, LaTa-850, and LaTa-1200, respectively. These results indicate that the intermediate phase, LaTa-850, is the most stable. This pattern of energetics may be related to cation-cation repulsion of the tantalate cations. We also investigated possible LnTaO{sub 4} and Ln{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2} analogues of Ln=Pr, Nd to examine the relationship between cation size and the resulting phases. - Graphical abstract: The energetics of three lanthanum tantalates were investigated by the high-temperature oxide melt solution calorimetry. The enthalpies of formation from the oxides were calculated from the enthalpies of drop solution to be -87.1{+-}9.6, -94.9{+-}8.8, and -93.1{+-}8.7 kJ/mol for La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2}, LaTaO{sub 4} (850 {sup o}C), and LaTaO{sub 4} (1200 {sup o}C), respectively. These results indicate that the intermediate phase, LaTaO{sub 4} (850 {sup o}C), is the most stable in energy. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge Transport Modulation in PbSe Nanocrystal Solids by Au x Ag 1– x Nanoparticle Doping

Nanocrystal (NC) solids are an exciting class of materials, whose physical properties are tunable by choice of the NCs as well as the strength of the interparticle coupling. One can consider these NCs as “artificial atoms” in analogy to the formation of condensed matter from atoms. Akin to atomic doping, the doping of a semiconducting NC solid with impurity NCs can drastically alter its electronic properties. A high degree of complexity is possible in these artificial structures by adjusting the size, shape, and composition of the building blocks, which enables “designer” materials with targeted properties. Here, we present the doping of the PbSe NC solids with a series of Au x Ag 1–x alloy nanoparticles (NPs). A combination of temperature-dependent electrical conductance and Seebeck coefficient measurements and room-temperature Hall effect measurements demonstrates that the incorporation of metal NPs both modifies the charge carrier density of the NC solids and introduces energy barriers for charge transport. These studies point to charge carrier injection from the metal NPs into the PbSe NC matrix. The charge carrier density and charge transport dynamics in the doped NC solids are adjustable in a wide range by employing the Au x Ag 1–x NP with different Au:Ag ratio as dopants. Furthermore, this doping strategy could be of great interest for thermoelectric applications taking advantage of the energy filtering effect introduced by the metal NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polarization-Independent Optical Broadband Angular Selectivity

Generalizing broadband angular selectivity to both polarizations has been a scientific challenge for a long time. Previous demonstrations of the broadband angular selectivity work only for one polarization. In this paper, we propose a method that can achieve polarization-independent optical broadband angular selectivity. Our design is based on a material system consisting of alternating one-dimensionally anisotropic photonic crystal (1D PhC) stacks and half-wave plates. 1D PhC stacks have an angular photonic band gap for p-polarized light and half-wave plates can convert s-polarized light to p-polarized light. Here, by introducing alternating 1D PhC stacks and half-wave plates, we predict that one can achieve a central transmission angle at normal incidence and an angularly selective range of less than 30° across the whole visible spectrum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Long-Term Performance in the Arizona Desert

Combining high-flux lighting applications with high-temperature environments poses a challenge for LED luminaires, because the higher the luminous flux, the harder it can be to dissipate heat to prevent damage to luminaire components. To learn more, the U.S. Department of Energy’s (DOE) GATEWAY program evaluated LED luminaire performance in the Yuma (Arizona) Sector Border Patrol Area along the U.S.-Mexico border, where temperatures reached as high as 120° F during the nearly four years of performance evaluation.

Solid-State Lighting, long-term performance, high-↗

Large Photothermal Effect in Sub-40 nm h-BN Nanostructures Patterned Via High-Resolution Ion Beam

The controlled nanoscale patterning of 2D materials is a promising approach for engineering the optoelectronic, thermal, and mechanical properties of these materials to achieve novel functionalities and devices. Herein, high-resolution patterning of hexagonal boron nitride (h-BN) is demonstrated via both helium and neon ion beams and an optimal dosage range for both ions that serve as a baseline for insulating 2D materials is identified. Through this nanofabrication approach, a grating with a 35 nm pitch, individual structure sizes down to 20 nm, and additional nanostructures created by patterning crystal step edges are demonstrated. Raman spectroscopy is used to study the defects induced by the ion beam patterning and is correlated to scanning probe microscopy. Photothermal and scanning near-field optical microscopy measure the resulting near-field absorption and scattering of the nanostructures. These measurements reveal a large photothermal expansion of nanostructured h-BN that is dependent on the height to width aspect ratio of the nanostructures. This effect is attributed to the large anisotropy of the thermal expansion coefficients of h-BN and the nanostructuring implemented. Finally, the photothermal expansion should be present in other van der Waals materials with large anisotropy and can lead to applications such as nanomechanical switches driven by light.

2D materials↗

Giant intrinsic photoresponse in pristine graphene

When the Fermi level is aligned with the Dirac point of gra-phene, reduced charge screening greatly enhances electron–electron scattering1–5. In an optically excited system, the kinematics of electron–electron scattering in Dirac fermions is predicted to give rise to novel optoelectronic phenomena6–11. In this paper, we report on the observation of an intrinsic pho-tocurrent in graphene, which occurs in a different parameter regime from all the previously observed photothermoelectric or photovoltaic photocurrents in graphene12–20: the photo-current emerges exclusively at the charge neutrality point, requiring no finite doping. Unlike other photocurrent types that are enhanced near p–n or contact junctions, the photo-current observed in our work arises near the edges/corners. By systematic data analyses, we show that the phenomenon stems from the unique electron–electron scattering kinemat-ics in charge-neutral graphene. Our results not only high-light the intriguing electron dynamics in the optoelectronic response of Dirac fermions, but also offer a new scheme for photodetection and energy harvesting applications based on intrinsic, charge-neutral Dirac fermions.

solar (photovoltaic), solid state lighting, photos↗

Multiwavelength metasurfaces through spatial multiplexing

Metasurfaces are two-dimensional arrangements of optical scatterers rationally arranged to control optical wavefronts. Despite the significant advances made in wavefront engineering through metasurfaces, most of these devices are designed for and operate at a single wavelength. Here we show that spatial multiplexing schemes can be applied to increase the number of operation wavelengths. We use a high contrast dielectric transmittarray platform with amorphous silicon nano-posts to demonstrate polarization insensitive metasurface lenses with a numerical aperture of 0.46, that focus light at 915 and 1550 nm to the same focal distance. We investigate two different methods, one based on large scale segmentation and one on meta-atom interleaving, and compare their performances. An important feature of this method is its simple generalization to adding more wavelengths or new functionalities to a device. Furthermore, it provides a relatively straightforward method for achieving multi-functional and multiwavelength metasurface devices.

36 MATERIALS SCIENCE↗

Probing local structure in the yellow phosphor LaSr[subscript 2]AlO[subscript 5]:Ce[superscript 3+], by the maximum entropy method and pair distribution function analysis

The compound LaSr{sub 2}AlO{sub 5} was recently introduced as a competitive Ce{sup 3+} host material for blue-pumped yellow phosphors for use in white light emitting diodes. A crucial feature of the crystal structure of LaSr{sub 2}AlO{sub 5} is that La, which is the host site for Ce{sup 3+}, is located in the 8h positions of the I4/mcm crystal structure, a site equally shared with Sr. While the average crystal structure of LaSr{sub 2}AlO{sub 5} as revealed by Rietveld analysis of laboratory and synchrotron X-ray diffraction data suggests nothing untoward, maximum entropy method analysis of the synchrotron X-ray data reveals the existence of conspicuous non-sphericity of the electron density. Pair distribution function analysis of the data suggests that despite their occupying the same crystallographic site, La and Sr possess distinct coordination environments, and the environment around La is more compact and regular than the environment suggested by the Rietveld refinement of the average structure. The absorption and emission from Ce{sup 3+} centers is controlled by the local coordination and symmetry, and the use of powerful new tools in unraveling details of these strengthens the rational search for new phosphors for solid state white lighting.

36 MATERIALS SCIENCE↗

Optical Broadband Angular Selectivity

Light selection based purely on the angle of propagation is a long-standing scientific challenge. In angularly selective systems, however, the transmission of light usually also depends on the light frequency. Here we tailored the overlap of the band gaps of multiple one-dimensional photonic crystals, each with a different periodicity, in such a way as to preserve the characteristic Brewster modes across a broadband spectrum. We provide theory as well as an experimental realization with an all–visible spectrum, p-polarized angularly selective material system. Our method enables transparency throughout the visible spectrum at one angle—the generalized Brewster angle—and reflection at every other viewing angle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanistic Regimes of Vibronic Transport in a Heterodimer and the Design Principle of Incoherent Vibronic Transport in Phycobiliproteins

Following the observation of coherent oscillations in nonlinear spectra of photosynthetic pigment protein complexes, in particular, phycobilliproteins such as PC645, coherent vibronic transport has been suggested as a design principle for novel light-harvesting materials. Vibronic transport between energetically remote pigments is coherent when the presence of a vibration resonant with the electronic energy gap supports transient delocalization between the electronic excited states. We establish the mechanism of vibronic transport for a model heterodimer across a wide range of molecular parameter values. The resulting mechanistic map demonstrates that the molecular parameters of phycobiliproteins in fact support incoherent vibronic transport. This result points to an important design principle: Incoherent vibronic transport is more efficient than a coherent mechanism when energetic disorder exceeds the coupling between the donor and vibrationally excited acceptor states. Finally, our results suggest that the role of coherent vibronic transport in pigment protein complexes should be reevaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗