Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUBSTRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Texture of CoSi2 Films on Si(111) (110) and (001) Substrates

Synchrotron radiation was used to study the texture of polycrystalline CoSi{sub 2} films that were formed by a solid-state reaction between a 30 nm Co film and Si(111), (110) and (001) substrates. All films were strongly textured, and several texture components were identified. We discuss the simultaneous occurrence of axiotaxy (i.e. alignment of lattice planes across the interface) and several different types of epitaxy in each of the films. Comparison of the different texture components observed on the three substrate orientations suggests a strong preference for the alignment of CoSi{sub 2}{l_brace}110{r_brace} planes in the film with Si{l_brace}110{r_brace} planes in the substrate, and twinning around Si[111] directions.

36 MATERIALS SCIENCE↗

Solution deposition planarization for ion beam texturing of long-length flexible substrates

We present the results of a study of solution deposition planarization (SDP) for preparing smooth flexible substrates in long lengths. Roll to roll fabrication of electronic and power devices with single-crystal properties are desired for inexpensive production. Using the SDP process we have achieved 0.5 nm RMS roughness from a starting roughness of over 20 nm on 5 {micro}m areas. We model the surface roughness reduction as governed by the amount of film shrinkage during solution deposition, number of coatings, solution composition and a residual roughness based on film thickness. This process is extremely well suited for ion-beam texturing of MgO. By utilizing solution deposition of a-Y{sub 2}O{sub 3} to planarize the substrate we create the required surface for in-plane MgO texturing using assisted ion-beam deposition. We have achieved in-plane texture FWHM of 4{sup o} on the SDP substrates. Using an appropriate simple layer architecture for superconducting coated conductors we attained critical currents in excess of 3 MA/cm{sup 2} at 75 K for 1-1.2 {micro}m thick YBa{sub 2}Cu{sub 3}O{sub y} films.

36 MATERIALS SCIENCE↗

Participation of Glutamate-354 of the CP43 Polypeptide in the Ligation of Mn and the Binding of Substrate Water in Photosystem II

In the current X-ray crystallographic structural models of photosystem II, Glu354 of the CP43 polypeptide is the only amino acid ligand of the oxygen-evolving Mn4Ca cluster that is not provided by the D1 polypeptide. To further explore the influence of this structurally unique residue on the properties of the Mn4Ca cluster, the CP43-E354Q mutant of the cyanobacterium Synechocystis sp. PCC 6803 was characterized with a variety of biophysical and spectroscopic methods, including polarography, EPR, X-ray Absorption, FTIR, and mass spectrometry. The kinetics of oxygen release in the mutant were essentially unchanged from those in wild-type. In addition, the oxygen flash-yields exhibited normal period-four oscillations having normal S state parameters, although the yields were lower, correlating with the mutant?s lower steady-state rate (approx. 20percent compared to wild-type). Experiments conducted with H218O showed that the fast and slow phases of substrate water exchange in CP43-E354Q thylakoid membranes were accelerated 8.5- and 1.8-fold, respectively, in the S3 state compared to wild-type. Purified oxygen-evolving CP43-E354Q PSII core complexes exhibited a slightly altered S1 state Mn-EXAFS spectrum, a slightly altered S2 state multiline EPR signal, a substantially altered S2-minus-S1 FTIR difference spectrum, and an unusually long lifetime for the S2 state (> 10 hours) in a substantial fraction of reaction centers. In contrast, the S2 state Mn-EXAFS spectrum was nearly indistinguishable from that of wild-type. The S2-minus-S1 FTIR difference spectrum showed alterations throughout the amide and carboxylate stretching regions. Global labeling with 15N and specific labeling with L-[1-13C]alanine revealed that the mutation perturbs both amide II and carboxylate stretching modes and shifts the symmetric carboxylate stretching modes of the ?-COO? group of D1-Ala344 (the C-terminus of the D1 polypeptide) to higher frequencies by 3 ? 4 cm-1 in both the S1 and S2 states. The EPR and FTIR data implied that 76 -82 percent of CP43-E354Q PSII centers can achieve the S2 state and that most of these can achieve the S3 state, but no evidence for advancement beyond the S3 state was observed in the FTIR data, at least not in a majority of PSII centers. Although the X-ray absorption and EPR data showed that the CP43-E354Q mutation only subtly perturbs the structure and spin state of the Mn4Ca cluster in the S2 state, the FTIR and H218O exchange data show that the mutation strongly influences other properties of the Mn4Ca cluster, altering the response of numerous carboxylate and amide groups to the increased positive charge that develops on the cluster during the S1 to S2 transition and weakening the binding of both substrate water molecules (or water derived ligands), especially the one that exchanges rapidly in the S3 state. The FTIR data provide evidence that CP43-Glu354 coordinates to the Mn4Ca cluster in the S1 state as a bridging ligand between two metal ions, but provide no compelling evidence that this residue changes its coordination mode during the S1 to S2 transition. The H218O exchange data provide evidence that CP43-Glu354 interacts with the Mn ion that ligates the substrate water molecule (or water-derived ligand) that is in rapid exchange in the S3 state.

59 BASIC BIOLOGICAL SCIENCES↗

Structures of Human Cyctochrome P450 2E1: Insights Into the Binding of Inhibitors And Both Small Molecular Weight And Fatty Acid Substrates

Human microsomal cytochrome P-450 2E1 (CYP2E1) monooxygenates >70 low molecular weight xenobiotic compounds, as well as much larger endogenous fatty acid signaling molecules such as arachidonic acid. In the process, CYP2E1 can generate toxic or carcinogenic compounds, as occurs with acetaminophen overdose, nitrosamines in cigarette smoke, and reactive oxygen species from uncoupled catalysis. Thus, the diverse roles that CYP2E1 has in normal physiology, toxicity, and drug metabolism are related to its ability to metabolize diverse classes of ligands, but the structural basis for this was previously unknown. Structures of human CYP2E1 have been solved to 2.2 {angstrom} for an indazole complex and 2.6 {angstrom} for a 4-methylpyrazole complex. Both inhibitors bind to the heme iron and hydrogen bond to Thr{sup 303} within the active site. Complementing its small molecular weight substrates, the hydrophobic CYP2E1 active site is the smallest yet observed for a human cytochrome P-450. The CYP2E1 active site also has two adjacent voids: one enclosed above the I helix and the other forming a channel to the protein surface. Minor repositioning of the Phe{sup 478} aromatic ring that separates the active site and access channel would allow the carboxylate of fatty acid substrates to interact with conserved {sup 216}QXXNN{sup 220} residues in the access channel while positioning the hydrocarbon terminus in the active site, consistent with experimentally observed {omega}-1 hydroxylation of saturated fatty acids. Thus, these structures provide insights into the ability of CYP2E1 to effectively bind and metabolize both small molecule substrates and fatty acids.

08 HYDROGEN↗

A Potent Peptidomimetic Inhibitor of Botulinum Neurotoxin Serotype a Has a Very Different Conformation Than SNAP-25 Substrate

Botulinum neurotoxin serotype A is the most lethal of all known toxins. Here, we report the crystal structure, along with SAR data, of the zinc metalloprotease domain of BoNT/A bound to a potent peptidomimetic inhibitor (Ki = 41 nM) that resembles the local sequence of the SNAP-25 substrate. Surprisingly, the inhibitor adopts a helical conformation around the cleavage site, in contrast to the extended conformation of the native substrate. The backbone of the inhibitor's P1 residue displaces the putative catalytic water molecule and concomitantly interacts with the 'proton shuttle' E224. This mechanism of inhibition is aided by residue contacts in the conserved S1' pocket of the substrate binding cleft, and the induction of new hydrophobic pockets, which are not present in the apo form, especially for the P2' residue of the inhibitor. Our inhibitor is specific for BoNT/A as it does not inhibit other BoNT serotypes or thermolysin.

36 MATERIALS SCIENCE↗

Dual Role of the RNA Substrate in Selectivity And Catalysis By Terminal Uridylyl Transferases

Terminal RNA uridylyltransferases (TUTases) catalyze template-independent UMP addition to the 3' hydroxyl of RNA. TUTases belong to the DNA polymerase {beta} superfamily of nucleotidyltransferases that share a conserved catalytic domain bearing three metal-binding carboxylate residues. We have previously determined crystal structures of the UTP-bound and apo forms of the minimal trypanosomal TUTase, TbTUT4, which is composed solely of the N-terminal catalytic and C-terminal base-recognition domains. Here we report crystal structures of TbTUT4 with bound CTP, GTP, and ATP, demonstrating nearly perfect superposition of the triphosphate moieties with that of the UTP substrate. Consequently, at physiological nucleoside 5'-triphosphate concentrations, the protein-uracil base interactions alone are not sufficient to confer UTP selectivity. To resolve this ambiguity, we determined the crystal structure of a prereaction ternary complex composed of UTP, TbTUT4, and UMP, which mimics an RNA substrate, and the postreaction complex of TbTUT4 with UpU dinucleotide. The UMP pyrimidine ring stacks against the uracil base of the bound UTP, which on its other face also stacks with an essential tyrosine. In contrast, the different orientation of the purine bases observed in cocrystals with ATP and GTP prevents this triple stacking, precluding productive binding of the RNA. The 3' hydroxyl of the bound UMP is poised for in-line nucleophilic attack while contributing to the formation of a binding site for a second catalytic metal ion. We propose a dual role for RNA substrates in TUTase-catalyzed reactions: contribution to selective incorporation of the cognate nucleoside and shaping of the catalytic metal binding site.

36 MATERIALS SCIENCE↗

Structural And Biochemical Studies of Botulinum Neurotoxin Serotype C1 Light Chain Protease: Implications for Dual Substrate Specificity

Clostridial neurotoxins are the causative agents of the neuroparalytic disease botulism and tetanus. They block neurotransmitter release through specific proteolysis of one of the three soluble N-ethylmaleimide-sensitive-factor attachment protein receptors (SNAREs) SNAP-25, syntaxin, and synaptobrevin, which constitute part of the synaptic vesicle fusion machinery. The catalytic component of the clostridial neurotoxins is their light chain (LC), a Zn2+ endopeptidase. There are seven structurally and functionally related botulinum neurotoxins (BoNTs), termed serotype A to G, and tetanus neurotoxin (TeNT). Each of them exhibits unique specificity for their target SNAREs and peptide bond(s) they cleave. The mechanisms of action for substrate recognition and target cleavage are largely unknown. Here, we report structural and biochemical studies of BoNT/C1-LC, which is unique among BoNTs in that it exhibits dual specificity toward both syntaxin and SNAP-25. A distinct pocket (S1') near the active site likely achieves the correct register for the cleavage site by only allowing Ala as the P1' residue for both SNAP-25 and syntaxin. Mutations of this SNAP-25 residue dramatically reduce enzymatic activity. The remote a-exosite that was previously identified in the complex of BoNT/A-LC and SNAP-25 is structurally conserved in BoNT/C1. However, mutagenesis experiments show that the a-exosite of BoNT/C1 plays a less stringent role in substrate discrimination in comparison to that of BoNT/A, which could account for its dual substrate specificity.

59 BASIC BIOLOGICAL SCIENCES↗

Graphene‐Assisted Antioxidation of Tungsten Disulfide Monolayers: Substrate and Electric‐Field Effect

Transition metal dichalcogenides (TMDs) have emerged as promising materials to complement graphene for advanced optoelectronics. However, irreversible degradation of chemical vapor deposition‐grown monolayer TMDs via oxidation under ambient conditions limits applications of TMD‐based devices. Here, the growth of oxidation‐resistant tungsten disulfide (WS 2 ) monolayers on graphene is demonstrated, and the mechanism of oxidation of WS 2 on SiO 2 , graphene/SiO 2 , and on graphene suspended in air is elucidated. While WS 2 on a SiO 2 substrate begins oxidation within weeks, epitaxially grown WS 2 on suspended graphene does not show any sign of oxidation, attributed to the screening effect of surface electric field caused by the substrate. The control of a local oxidation of WS 2 on a SiO 2 substrate by a local electric field created using an atomic force microscope tip is also demonstrated.

Kang, Kyungnam↗

Controlled Growth of Single‐Crystal Graphene Wafers on Twin‐Boundary‐Free Cu(111) Substrates

Single-crystal graphene (SCG) wafers are needed to enable mass-electronics and optoelectronics owing to their excellent properties and compatibility with silicon-based technology. Controlled synthesis of high-quality SCG wafers can be done exploiting single-crystal Cu(111) substrates as epitaxial growth substrates recently. However, current Cu(111) films prepared by magnetron sputtering on single-crystal sapphire wafers still suffer from in-plane twin boundaries, which degrade the SCG chemical vapor deposition. Here, in this study, it is shown how to eliminate twin boundaries on Cu and achieve 4 in. Cu(111) wafers with ≈95% crystallinity. The introduction of a temperature gradient on Cu films with designed texture during annealing drives abnormal grain growth across the whole Cu wafer. In-plane twin boundaries are eliminated via migration of out-of-plane grain boundaries. SCG wafers grown on the resulting single-crystal Cu(111) substrates exhibit improved crystallinity with >97% aligned graphene domains. As-synthesized SCG wafers exhibit an average carrier mobility up to 7284 cm 2 V −1 s −1 at room temperature from 103 devices and a uniform sheet resistance with only 5% deviation in 4 in. region.

36 MATERIALS SCIENCE↗

Mechanistic Studies on the Insertion of Carbonyl Substrates into Cu‐H: Different Rate‐Limiting Steps as a Function of Electrophilicity

Abstract We report mechanistic studies on the insertion reactions of [(NHC)Cu(μ‐H)] 2 complexes with carbonyl substrates by UV‐vis and 1 H NMR spectroscopic kinetic studies, H/D isotopic labelling, and X‐ray crystallography. The results of these comprehensive studies show that the insertion of Cu‐H with an aldehyde, ketone, activated ester/amide, and unactivated amide consist of two different rate limiting steps: the formation of Cu‐H monomer from Cu‐H dimer for more electrophilic substrates, and hydride transfer from a transient Cu‐H monomer for less electrophilic substrates. We also report spectroscopic and crystallographic characterization of rare Cu‐hemiacetalate and Cu‐hemiaminalate moieties from the insertion of an ester or amide into the Cu−H bond.

Tran, Ba L.↗

Is a Malleable Active Site Loop the Key to High Substrate Promiscuity? Hybrid, Biocatalytic Route to Structurally Diverse Taxoid Side Chains with Remarkable Dual Stereocontrol

Abstract These studies reveal the first structure ofClostridium acetobutylicumalcohol dehydrogenase (CaADH), a protein exhibiting remarkable substrate promiscuity and stereochemical fidelity. The CaADH enzyme is utilized here for synthesizing 20 potential aryl isoserine side chains for the Taxotere family of tubulin‐binding chemotherapeutics. The approach involves dynamic reductive kinetic resolution (DYRKR) upon the corresponding α‐chloro‐β‐keto esters, showing high D‐synstereoselectivity, including those leading to the clinically relevant milataxel (Ar = 2‐furyl) and simotaxel (Ar = 2‐thienyl) side chains. Furthermore, various cross‐coupling chemistries performed on thep‐bromophenyl isoserine side chain significantly enhance the structural diversity of the taxoid side chain library obtained (16 additional taxoid side chains). The CaADH structure is notable: (i) the nicotinamide cofactor is bound in ananti‐conformation, with the amide carbonyl occupying the ketone binding pocket, and (ii) a flexible loop near the active site likely contributes to the remarkable substrate promiscuity observed in CaADH. We present our perspective on the dynamic nature of the CaADH active site through molecular dynamics simulation, proposing a halogen bonding model as a potential mechanism for the remarkable selectivity for an (S)‐configured C─Cl bond, in addition to the D‐facial selectivity, demonstrated across 20 diverse substrates by this remarkable short‐chain dehydrogenase enzyme.

Chemistry↗

Biocatalytic Carboxylic Acid Reduction and Transamination in Cell‐Free Lysates at High Substrate Loading

Chemoselective reduction of stable carboxylic acids to reactive aldehydes is of interest across many industries. While carboxylic acid reductases (CARs) are promising biocatalysts for this chemistry, poor chemoselectivity and low yield are commonly obtained when using less expensive crude lysate preparations and prerequisite ATP and NADPH regeneration systems. Here, in this work, we developed a highly chemoselective multienzyme cascade featuring a CAR and an ω-transaminase (TA) in crude lysate format, with conversion of the dicarboxylic acid terephthalic acid (TPA) into the diamine para -xylylenediamine (pXDA) as the model chemistry. We improved chemoselectivity for pXDA using engineered aldehyde-stabilizing Escherichia coli strains, though desired product yields remained modest. We next found that CAR activity was limited at high substrate loadings and overcame this bottleneck by modulating the ratio of polyphosphate (polyP 6 ) to Mg 2+ , enabling volumetric scaling and increased substrate loading up to 50 mM TPA. We then showcased the portability of this platform across substrates, resulting in the synthesis of four other high-value amines from carboxylate precursors. The combination of high carboxyl group turnover, up to 93.5 mM under the tested conditions, and the simplicity of crude enzyme preparation is a promising platform for sustainable functional group interconversion.

60 APPLIED LIFE SCIENCES↗

Laser-Induced Self-Assembled Nanostructures on Electron-Transparent Substrates

Currently, one of the challenges in high-resolution transmission electron microscopy (TEM) studies of nanomaterials is to make contamination-free materials in a simple and time-efficient way. We demonstrate a method that combines nanosecond-pulsed laser dewetting of thin films with a film float-off technique to realize nanostructures (NSs) on electron-transparent substrates in a robust and rapid manner. NSs of metal (Ag) and bimetals (AgCo, AuCo) ranging from 20 to 150 nm are synthesized on thin carbon film deposited on mica substrates. The NS/carbon system is subsequently transferred onto TEM grids by a float-off process resulting from debonding of the carbon from mica due to their contrasting hydrophobic nature. Our process enables the fabrication of different NSs on flexible and electron-transparent substrates.

36 MATERIALS SCIENCE↗

Controlling the Charge Density Wave Transition in Monolayer TiSe 2 : Substrate and Doping Effects

Abstract TiSe 2 is an exciting material because it can be tuned between superconducting and charge density wave (CDW) transitions. In the monolayer limit, TiSe 2 exhibits a sizable energy gap in the CDW phase that makes it a promising quantum material. It is shown that interfacing a single layer of TiSe 2 with dissimilar van der Waals materials enables control of its properties. Using angle‐resolved photoemission spectroscopy, the energy gap opening is analyzed as a function of temperature for TiSe 2 monolayers supported on different van der Waals substrates. A substantial increase in the CDW transition temperature of ≈45 K is observed on MoS 2 compared to graphite (highly oriented pyrolytic graphite) substrates. This control of the CDW in monolayer TiSe 2 is suggested to arise from varying charge screening of the unconventional CDW of TiSe 2 by the substrate. In addition, the suppression of CDW order and a complete closing of the energy gap by electron doping of monolayer TiSe 2 is demonstrated. Regulating the many‐body physics phenomena in monolayer TiSe 2 lays the foundation of modifying TiSe 2 in, for example, artificial van der Waals heterostructures and thus creates a new approach for utilizing the quantum states of TiSe 2 in device applications.

Kolekar, Sadhu↗

Substrate, temperature, and geographical patterns among nearly 2000 natural yeast isolates

Yeasts have broad importance as industrially and clinically relevant microbes and as powerful models for fundamental research, but we are only beginning to understand the roles yeasts play in natural ecosystems. Yeast ecology is often more difficult to study compared to other, more abundant microbes, but growing collections of natural yeast isolates are beginning to shed light on fundamental ecological questions. In this work, we used environmental sampling and isolation to assemble a dataset of 1962 isolates collected from throughout the contiguous United States of America (USA) and Alaska, which were then used to uncover geographic patterns, along with substrate and temperature associations among yeast taxa. We found some taxa, including the common yeasts Torulaspora delbrueckii and Saccharomyces paradoxus, to be repeatedly isolated from multiple sampled regions of the USA, and we classify these as broadly distributed cosmopolitan yeasts. A number of yeast taxon-substrate associations were identified, some of which were novel and some of which support previously reported associations. Further, we found a strong effect of isolation temperature on the phyla of yeasts recovered, as well as for many species. We speculate that substrate and isolation temperature associations reflect the ecological diversity of and niche partitioning by yeast taxa.

59 BASIC BIOLOGICAL SCIENCES↗

Tensile cracking of a brittle conformal coating on a rough substrate

This note examines the effect of interfacial roughness on the initiation and growth of channel cracks in a brittle film. A conformal film with cusp-like surface flaws that replicate the substrate roughness is investigated. This type of surface flaw is relatively severe in the sense that stress diverges as the cusp-tip is approached (i.e., there is a power-law stress singularity). For the geometry and range of film properties considered, the analysis suggests that smoothing the substrate could substantially increase the film’s resistance to the formation of the through-the-thickness cracks that precede channel cracking. Furthermore, smoothing the substrate’s surface has a relatively modest effect on the film stress needed to propagate a channel crack.

36 MATERIALS SCIENCE↗

Optical Characteristics of Zinc Oxide Films on Glass Substrates

An algorithm is developed for solving the inverse problem of multiangular spectrophotometry of a layer on a planeparallel substrate of fi nite thickness using s- and p-polarized waves. It allows the dispersive properties of the layer and substrate to be studied both far from and in the vicinity of the resonant wavelengths. The dispersive properties of layers of pure and Al-doped ZnO on glass substrates are investigated using it. It is shown that doping shifts the absorption band maximum to shorter wavelength and decreases the refractive index of the material. The applicability limits of known approximate expressions for determining the spectral dependence of the absorption coeffi cient of a layer from spectrophotometric data are estimated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of High Density Electrons Above a Helium Film on an Amorphous Metal Substrate

Here we have measured two-dimensional electron systems bound to a thin helium film supported by a metallic substrate. We report on our measurement of electron density obtained via a Kelvin probe technique. The underlying metallic substrate is an amorphous metallic alloy (TaWSi), which can support large uniform densities due to its low surface roughness and homogeneous work function. We find that this substrate is able to support high enough densities that the electrons are expected to be Fermi-degenerate.

42 ENGINEERING↗