Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Effect of Initial State of Lithium on the Propensity for Dendrite Formation: A Theoretical Study

Mechanical constraints have been widely used experimentally to prevent the growth of dendrites within lithium metal. The only article known to the authors that tries to theoretically understand how mechanical forces prevent dendrite growth was published by Monroe and Newman [J. Electrochem. Soc., 150 (10) A1377 (2005)]. Based on the assumption that surface tension prevents the growth of interfacial roughness, Monroe and Newman considered pre-stressed conditions of the lithium electrodes. This scenario indicates that prevention of dendrite growth by mechanical means is only possible by using electrolytes with shear modulus at least two times larger than that of lithium metal. Here, a different scenario of relaxed lithium metal (without any pre-existing surface stresses) has been considered in the present analysis. Deposition of lithium due to electrochemical reaction at the lithium/electrolyte interface induces compressive stress at the electrode, the electrolyte, and the newly deposited lithium metal. Present simulations indicate that during operation at low current densities, the scenario of relaxed lithium leads to no dendrites. Rather, the present study points to the importance of including the effect of current distribution to accurately capture the mechanical forces needed to prevent dendrite growth.

25 ENERGY STORAGE↗

Mechanical Deformation of a Lithium-Metal Anode Due to a Very Stiff Separator

This work builds on the two-dimensional model presented by Ferrese et al. [J. Electrochem. Soc., 159, A1615 (2012)1, which captures the movement of lithium metal at the negative electrode during cycling in a Li-metal/LiCoO2 cell. In this paper, the separator is modeled as a dendrite-inhibiting polymer separator with an elastic modulus of 16 GPa. The separator resists the movement of lithium through the generation of stresses in the cell. These stresses affect the negative electrode through two mechanisms altering the thermodynamics of the negative electrode and deforming the negative electrode mechanically. From this analysis, we find that the dendrite-inhibiting separator causes plastic and elastic deformation of the lithium at the negative electrode which flattens the electrode considerably when compared to the liquid-electrolyte case. This flattening of the negative electrode causes only very slight differences in the local state of charge in the positive electrode. When comparing the magnitude of the effects flattening the negative electrode, we find that the plastic deformation plays a much larger role than either the pressure-modified reaction kinetics or elastic deformation. This is due to the low yield strength of the lithium metal, which limits the stresses such that they have only a small effect on the reaction kinetics. (C) 2014 The Electrochemical Society. All rights reserved.

Ferrese, A↗

Sensitivity Analysis and Effective Parametrization of PEM Fuel Cell Models

The cost of proton-exchange-membrane fuel cells (PEMFCs) remains a major hurdle in large-scale commercialization of this technology. To improve their performance and reduce cost, novel materials and electrode designs are continuously envisioned, e.g., non-PGM catalyst layers, ultra-thin Pt/Pt-Ni based catalyst layers, structured ionomer arrays or NSTF catalyst layers.1 Understanding the impact of these improvement strategies can be extremely time and cost intensive due to complex physical phenomena and large design space. We have previously developed a PEMFC modeling framework2 which has been a time and cost effective tool for understanding and optimizing the complex multi-physics phenomena within PEMFCs; however, several of the cell parameters used in the modeling have large spread in measured data.3 Furthermore, several transport parameters such as water adsorption kinetics have not been accurately measured and the approximations are spread over several orders of magnitude. These uncertainties cause problems in ascertaining accuracy of the modeling approach and they reduce the predictive power of the numerical models. The aim of this work is to identify the sensitivity of PEFC numerical model outputs to various input parameters. The previously in-house developed MEA modeling framework2 is used for PEMFC modeling. The sensitivity of the model outputs with respect to inputs parameters is obtained by analyzing the condition numbers for different output-input pairs at varying operating conditions. An example of the sensitivity analysis is shown in Figure 1. The condition numbers are obtained for the entire possible range of input parameters at varying operating conditions to identify the most crucial parameters of the PEMFC model. Based on our preliminary analysis, parameters related to kinetics (exchange current density and ECSA) and heat/water management in electrodes and ionomer (ionomer fraction, thermal conductivity) are most crucial. One of the major goals of this work is to identify the most crucial set of parameters towards which the model shows maximum sensitivity. This will guide future experimentalists to measure these properties with higher accuracy. Furthermore, the sensitivity analysis will also enable us to optimize the PEMFC performance by selectively targeting the most sensitive parameters and thereby making the largest impact. Acknowledgements The work is funded under the Fuel Cell Performance and Durability Consortium (FC-PAD), by the Fuel Cell Technologies Office (FCTO), Office of Energy Efficiency and Renewable Energy (EERE), of the U.S. Department of Energy under contract number DE-AC02-05CH11231. The authors would like to thank Nathan Craig at Robert Bosch LLC for his valuable input in designing the sensitivity analysis. The authors would also like to thank Giovanna Bucci and Matthias Hanauer at Robert Bosch for their valuable inputs and discussion. References P. K. Sinha, W. Gu, A. Kongkanand and E. Thompson, J. Electrochem. Soc., 158, B831 (2011). L. M. Pant, M. R. Gerhardt, N. Macauley, R. Mukundan, R. L. Borup and A. Z. Weber, Electrochim. Acta, 326, 134963 (2019). R. Vetter and J. O. Schumacher, ArXiv181110091 Phys. (2018). Figure 1

Pant, Lalit↗

Techno-Economic Analysis of Reversible and Paired Solid Oxide Cell Systems for Hydrogen Production

This is the Journal of the Electrochemical Society manuscript that details an NETL analysis on comparing the performance and cost of reversible solid oxide cell (SOC) units versus paired fuel cell (SOFC) and electrolysis cell (SOEC) units. The analysis compares tradeoffs such as capital costs versus rate of performance degradation, sensitivity to natural gas prices, sensitivity to imported power costs, and other relevant analyses. The systems include a high rate (98%) of carbon capture. The analysis shows that given a certain cost of electricity input, either approach could be viable in the market and points to the need to incorporate into a full system to understand impacts.

Noring, Alex↗

OpenSoC Fabric

Recent advancements in technology scaling have shown a trend towards greater integration with large-scale chips containing thousands of processors connected to memories and other I/O devices using non-trivial network topologies. Software simulation proves insufficient to study the tradeoffs in such complex systems due to slow execution time, whereas hardware RTL development is too time-consuming. We present OpenSoC Fabric, an on-chip network generation infrastructure which aims to provide a parameterizable and powerful on-chip network generator for evaluating future high performance computing architectures based on SoC technology. OpenSoC Fabric leverages a new hardware DSL, Chisel, which contains powerful abstractions provided by its base language, Scala, and generates both software (C++) and hardware (Verilog) models from a single code base. The OpenSoC Fabric2 infrastructure is modeled after existing state-of-the-art simulators, offers large and powerful collections of configuration options, and follows object-oriented design and functional programming to make functionality extension as easy as possible.

Source record↗

Logic in Memory Emulator

Logic in Memory Emulator (LiME) is a hardware/software tool specially designed for memory system evaluation and experiment. Emerging memories display a wide range of bandwidths, latencies, and capacities, making it challenging for the computer architect to navigate the design space of potential memory configurations, and for the application developer to assess performance implications of using such memories. With the LiME framework, architectural ideas can be prototyped in great detail yet with sufficient performance to support realistic evaluation on long running applications. LiME consists of two fundamental components: 1) the hardware and OS infrastructure for the emulator, and 2) a suite of benchmark applications to assist in characterizing the performance of current and future computer architectures. Some of the applications have been collected from other open source projects. Uses: Logging, replay and analysis of an application's memory behavior Evaluate impact of emerging memory technology on application performance. Emulate complex memory interactions in whole applications orders of magnitude faster than software simulation. Emulate acceleration hardware co-located with the memory subsystem. Features: Capture and log external memory accesses to a separate off-chip memory device without affecting application execution. Memory traces include the address, length, timestamp, and optionally the data for each transaction. Captured trace data can be saved to an SD card for off-line analysis. Configure a wide range of memory latencies in sub-nanosecond increments that encompass highbandwidth and storage class memories. Specify regions of interest (ROI) in applications to reduce the amount of trace data captured for analysis. Currently supports execution on Xilinx Zynq SoC which integrates an ARM processor with FPGA logic on a single device. Applications can be run under Linux or in bare metal mode on the ARM cores.

Jain, AbhishekK↗

Soar Survey Scoring

ORNL conducted an experiment to test COTS (commercial off the shelf) SOAR tools. Vendors interested in entering their tool into the experiment were asked to submit information videos about their tool for phase 1 to down-select which tools should make it through to the testing phase. SOC operators were assigned to watch a subset of the videos such that each video was assigned to the same number of operators. After watching all the videos, operators completed surveys which asked them to grade basic aspects about the tool as best as they could based on the provided video, and asked them to rank the order of their interest in the vendors they were assigned to watch videos on. The problem solved was how do we aggregate the results of the surveys and each of the operator's ranked lists into an overall ranking of all the tools. In addition, it was desirable to be able to work on this code before final results were collected from operators, so code to generate fake data was developed to output in the same output as the survey results.

Bridges, Robert↗

thevenin: An Equivalent Circuit Modeling Package [SWR-24-132]

This package is a wrapper for the well-known Thevenin equivalent circuit model for simulating battery behavior with a focus on ease of use. The model is comprised of a single series resistor followed by any number of parallel RC pairs. The package includes an intuitive "experiment" interface, which simplifies the programming of constant or dynamic current, voltage, and/or power-driven loads, making it ideal for a wide range of applications, from basic tests to complex simulations. It also supports state-of-charge (SOC) and temperature-dependent properties, allowing the model to be more easily calibrated against real cells.

Randall, Corey↗

EVSE DERMS Controls [SWR-26-010]

An MQTT (Message Queuing Telemetry Transport) and OCPP (Open Charge Point Protocol) based remote smart charging controller framework for AC Electric Vehicle Supply Equipments (EVSEs). The code in this repo allows for the National Laboratory of the Rockies (NLR) controls to interface with the real Distributed Energy Resource Management System (DERMS) and EVSEs in NLR's ESIF Optimization and Control Laboratory (OCL). Different charge management algorithms can be tested to determine which power allocation method is most effective with the overall goal of demonstrating clear and well documented test results as well as providing functional control algorithms which could be utilized to provide effective smart charge management (SCM) at EV charging stations. Different power allocation methods are programmed in lab_demo_controller.py and include allocation based on first come first served, equal sharing, state of charge (SOC), priority factors, and behind the meter control methods.

Panossian, Nadia [National Laboratory of the Rocki↗

Berkeley eXtensible Environment (BXE) v3

The Berkeley eXtensible Environment (BXE) provides a cloud environment for hardware designers and computer architects to design, build, and simulate their custom architectures on an on-premises FPGA cluster. Utilizing the Chipyard, MoSAIC, and FireSim frameworks, users are provided an environment where they can assemble SoC designs from an existing library of components or import their own source code. Once their designs are ready, they can utilize the FireSim framework provided by BXE to deploy and simulate their designs on the FPGA. Users aren't limited to a single FPGA; they can deploy multiple instances across multiple FPGAs, acting like a rack of servers, or partition their large design across multiple FPGAs, ganging multiple FPGAs into a single simulated system.

Fatollahi-Fard, Farzin↗

A Multiscale Modeling Approach to Analyze Filament-Wound Composite Pressure Vessels

A multiscale modeling approach to analyze filament-wound composite pressure vessels is developed in this article. The approach, which extends the Nguyen et al. model [J. Comp. Mater. 43 (2009) 217] developed for discontinuous fiber composites to continuous fiber ones, spans three modeling scales. The microscale considers the unidirectional elastic fibers embedded in an elastic-plastic matrix obeying the Ramberg-Osgood relation and J2 deformation theory of plasticity. The mesoscale behavior representing the composite lamina is obtained through an incremental Mori-Tanaka type model and the Eshelby equivalent inclusion method [Proc. Roy. Soc. Lond. A241 (1957) 376]. The implementation of the micro-meso constitutive relations in the ABAQUS® finite element package (via user subroutines) allows the analysis of a filament-wound composite pressure vessel (macroscale) to be performed. Failure of the composite lamina is predicted by a criterion that accounts for the strengths of the fibers and of the matrix as well as of their interface. The developed approach is demonstrated in the analysis of a filament-wound pressure vessel to study the effect of the lamina thickness on the burst pressure. The predictions are favorably compared to the numerical and experimental results by Lifshitz and Dayan [Comp. Struct. 32 (1995) 313].

Filament-wound composite, pressure vessel, multisc↗

Data for "A 13-year record indicates differences in the duration and depth of soil carbon accrual among potential bioenergy crops"

Data sets for material included in "A 13-year record indicates differences in the duration and depth of soil carbon accrual among potential bioenergy crops" by Kantola et al., 2025, in Global Change Biology Bioenergy. Data include soil organic carbon (SOC), carbon stable isotope ratios, annual belowground biomass, and annual post-harvest litter for four crops, maize/soybean, miscanthus, switchgrass, and prairie, between 2008 and 2021.

bioenergy crops↗

Altermagnetic behavior in OsO2: Parallels with RuO2

This dataset contains input and output files from DFT simulations used to reproduce the electronic and phonon band structures of bulk OsO₂ and RuO₂. The files include data from initial electronic structure and phonon calculations performed with Hubbard-U correction (i.e., Antiferromagnetic, AFM) and without Hubbard-U correction (i.e., Non-magnetic, NM). The electronic structure calculations are provided both with and without spin-orbit coupling (SOC). The computed electronic properties are compared with existing literature, while the calculated phonon density of states (PhDOS) is compared with experimental PhDOS.

36 MATERIALS SCIENCE↗

Comment on 'Superluminal solitons in a {lambda}-type atomic system with two-folded levels'

We show that the analysis of the optical solitons in a resonant, lifetime-broadened {lambda}-type atomic system with two-folded lower levels, given recently by D. Han et al. [J. Opt. Soc. Am. B 24, 2244 (2007)], is incorrect. Although in the anomalous dispersion regime near resonance one may obtain a superluminal optical soliton, such a soliton suffers serious absorption and hence cannot propagate a significant distance. However, by choosing appropriate system parameters to work in the normal dispersion regime and hence inside the transparency windows of double dark resonance, an ultraslow optical soliton with very low light intensity can form and propagate stably for a fairly long distance.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nonlocal photopolymerization kinetics including multiple termination mechanisms and dark reactions. Part I. Modeling

The photochemical processes present during free-radical-based holographic grating formation are examined. A kinetic model is presented, which includes, in a more nearly complete and physically realistic way, most of the major photochemical and nonlocal photopolymerization-driven diffusion effects. These effects include: (i) non-steady-state kinetics (ii) spatially and temporally nonlocal polymer chain growth (iii) time varying photon absorption (iv) diffusion controlled viscosity effects (v) multiple termination mechanisms, and (vi) inhibition. The convergence of the predictions of the resulting model is then examined. Comparisons with experimental results are carried out in Part II of this series of papers [J. Opt. Soc. Am. B 26, 1746 (2009)].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Soil Warming Impacts Soil Moisture and Plant Water Stress and Thereby Ecosystem Carbon Dynamics (Blodgett, CA)

This dataset contains data on daily soil temperature, moisture and flux, and soil carbon stock and root biomass across a soil profile down to 100 cm depth at Blodgett Forest Research Station, CA, USA. These data were generated to determine if modeling of an experimental soil warming of 4C showed increased soil CO2 emissions and changes in bulk soil carbon stocks with depth consistent with field observations, as part of the study: Riley et al. (2025) Experimental Soil Warming Impacts Soil Moisture and Plant Water Stress and Thereby Ecosystem Carbon Dynamics in Journal of Advances in Modeling Earth Systems. This research was performed within the framework of the TES Belowground Biogeochemistry SFA project, in particular association with a 1 m-deep experimental soil heating experiment at the University of California Blodgett Forest Research Station, California (120 ° 39′40′′W; 38 ° 54′43′′N). Continuous data were collected at the plot level, and bulk soil carbon and root biomass were sampled once a year from each plot from 0-100 cm, in 10 cm intervals. Measurements relevant to the current study include soil temperature and soil volumetric water content measured continuously at multiple depths in the top meter; fine root biomass and SOC stocks measured from annual soil cores. Soil flux was continuously monitored using a LI-8100 Automated CO2 Flux System in conjunction with the LI-8150 Multiplexer (Licor, Nebraska, USA). Soil flux was determined using SoilFluxPro software, with flux values showing an R² fit of less than 0.9 being excluded from the analysis. Data were collected from each paired plot (1-3): one control (C) and one heated (H).

54 ENVIRONMENTAL SCIENCES↗

Walker Branch Watershed: Daily Stream Metabolism and Organic Carbon Spiraling Metrics in the West Fork of Walker Branch, Tennessee, USA, 2004-2010

This dataset contains daily metabolism estimates of gross primary production (GPP), ecosystem respiration (ER), and net ecosystem production (NEP), in addition to organic carbon spiraling length (SOC) and mineralization velocity (VfOC) estimates at the West Fork of Walker Branch, a small headwater stream, in the Walker Branch Watershed, Tennessee, USA. Observations were made from 2004-2010 (2004-01-01 to 2010-12-31). These data were generated to assess seasonal and interannual variability in metabolism and organic carbon spiraling and to explore potential driver variables, as analyses of intra- and interannual variability in metabolism and organic carbon spiraling are currently limited, leaving knowledge gaps in the driving mechanisms of and future changes to stream metabolism and carbon processing under climate change. Additionally, measurements of discharge (Q), stream width, stream- and canopy-level photosynthetically active radiation (PAR), water temperature, and precipitation from this time frame are included. This dataset contains one data file in comma separated (*.csv) format.

54 ENVIRONMENTAL SCIENCES↗