Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SNL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Predicting Ice Sheet and Climate Evolution on Extreme Scales (PISCEES) Final Report

Predicting Ice Sheet and Climate Evolution at Extreme Scales (PISCEES) PISCEES is a SciDAC Earth System Modeling project with the following goals: To develop and apply robust, accurate, and scalable dynamical cores for ice sheet modeling on structured and unstructured meshes with adaptive refinements To evaluate ice sheet models using new tools and data sets for verification and validation (V&V) and uncertainty quantification (UQ) To integrate these models and tools into DOE's Accelerated Climate Model for Energy (ACME) using improved estimates of ice sheet initial conditions, we will simulate decade-to-century-scale evolution of the Greenland and Antarctic ice sheets, running PISCEES ice sheet models both in standalone mode and coupled to ACME. We aim to provide useful, credible predictions, including uncertainty ranges, of future ice-sheet mass loss and resulting changes in climate and sea level. PISCEES is jointly funded by the Office of Biological and Environmental Research (BER) and the Office of Advanced Scientific Computing Research (ASCR) of the DOE Office of Science. Participating institutions: Los Alamos National Laboratory (LANL) Lawrence Berkeley National Laboratory (LBNL) Oak Ridge National Laboratory (ORNL) Sandia National Laboratories (SNL) Florida State University (FSU) Massachusetts Institute of Technology (MIT) University of South Carolina (USC) University of Texas at Austin (UT) National Center for Atmospheric Research (NCAR) (https://www.scidac.gov/PISCEES/).

54 ENVIRONMENTAL SCIENCES↗

Kokkos Training Bootcamp WBS STPM12 Milestone 4

This report documents the completion of milestone STPM12-4 Kokkos Training Bootcamp. The goal of this milestone was to hold a combined tutorial and hackathon bootcamp event for the Kokkos community and prospective users. The Kokkos Bootcamp event was held on-site at Oak Ridge National Lab from July 24 — July 27, 2018. There were over 40 registered participants from 12 institutions, including 7 Kokkos project staff from SNL, LANL, and ORNL. The event consisted of a roughly a two-day tutorial session including hands exercises, followed by 1.5 days of intensive porting work on codes that the participants brought explore, port, and optimize the use of Kokkos with the help of Kokkos project experts.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

DARMA-MPI Interoperability WBS 2.3.1.04 Milestone 15 (ECP Milestone Report)

DARMA (Distributed Asynchronous Resilient Models for Applications) is a runtime library developed as part of the the Sandia ATDM (Advanced Technology Development and Mitigation) program. DARMA supports applications within 2.2.5.03 ADNN03-ASC ATDM SNL Application, which includes a number of applications featuring dynamic physics which requires load balancing and asynchronous communication for high performance. We have implemented a modern C++ programming model that can enable dynamic, asynchronous communication on top of existing data structures from a serial or MPI code. DARMA development has occurred in parallel with a verification milestone for ATDM in FY18. For FY19, DARMA will impact ATDM by enabling the performance benefits of a dynamic runtime through only incremental changes to existing verified MPI codes. The results presented here demonstrate the DARMA development process for an MPI mini-app, showing a 3-4x improvement in performance for a challenging problem relative to the parent MPI code and coming within 25 percent of the theoretically optimal performance achievable from a perfect, fine-grained load balancer for most cases.

97 MATHEMATICS AND COMPUTING↗

DARMA-Kokkos Data and Execution Interoperability WBS 2.3.1.04 Milestone 16 (ECP Milestone Report)

DARMA (Distributed Asynchronous Resilient Models for Applications) is a runtime library supporting the Sandia ATDM (Advanced Technology Development and Mitigation) program. The main application drivers fall within the ECP milestone 2.2.5.03 ADNN03-ASC ATDM SNL Application, which includes applications that require load balancing and asynchronous communication for high performance. The DARMA runtime infrastructure has been modified to be compatible with Kokkos/OpenMP parallelization within tasks, which is a critical requirement for high performance for the Sandia ATDM apps. DARMA development has occurred in parallel with a verification milestone for ATDM in FY18. For FY19, DARMA should impact ATDM by enabling dynamic load balancing and communication through only incremental changes to the existing verified MPI codes. DARMA can now support the intra-kernel thread parallelization in the parent MPI apps, allowing DARMA to be easily added without rewriting individual math kernels. The results presented here demonstrate the DARMA results for an MPI mini-app.

97 MATHEMATICS AND COMPUTING↗

Annular Core Research Reactor Pulse History Report: 2003-2017

This report documents and describes the tabulation and analysis of historical pulse operation data from the Annular Core Research Reactor (ACRR) at Sandia National Laboratories (SNL). The pulse data was obtained from a combination of pulse log files generated at the control console and pulse diagnostics system data. The pulses presented were performed within the time period of April 2003 and December 2017. A brief analysis of the data is included to characterize the aggregate behavior of ACRR pulses with respect to theoretical treatments based on the point reactor kinetics model. It is expected that the data presented will provide an organized and consolidated resource to reference historical pulse data at the ACRR for use in analyses, verification and validation, and general understanding of the machine. A comprehensive set of data is presented to the reader in the appendices.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Executive Summary to PDCI Oscillation Damping Controller Software Documentation

This report serves as the executive summary to the comprehensive document that describes the software, control logic, and operational functions of the Pacific DC Intertie (PDCI) Oscillation Damping Controller. The purpose of the damping controller (DCON) is to mitigate inter-area oscillations in the Western Interconnection (WI) by active improvement of oscillatory mode damping using phasor measurement unit (PMU) feedback to modulate power flow in the PDCI. This report provides the high level descriptions, diagrams, and charts to receive a basic understanding of the organization and structure of the DCON software. This report complements the much longer comprehensive software document, and it does not include any proprietary information as the more comprehensive report does. The level of detail provided by the comprehensive report on the software documentation is intended to assist with the process needed to obtain compliance for North American Electric Reliability Corporation Critical Infrastructure Protection (NERC-CIP) as a Bulk energy system Cyber Asset (BCA) device. That report organizes, summarizes, and presents the charts, figures, and flow diagrams that detail the organization and function of the damping controller software. The PDCI Wide-Area Damping Controller is the result of a collaboration between Sandia National Laboratories (SNL), Bonneville Power Administration (BPA), Montana Tech University (MTU), and the Department of Energy (DOE).

24 POWER TRANSMISSION AND DISTRIBUTION↗

Software Requirements of SNAP for Editing MELCOR 2.2 Models

Applications of the severe accident analysis code MELCOR, developed for the U.S. Nuclear Regulatory Commission (NRC) by Sandia National Laboratories (SNL), have been supported by the graphical user-interface and post-processing suite Symbolic Nuclear Analysis Package (SNAP), developed for the NRC by Applied Programming Technology (APT). With the release of MELCOR 2.2, new user functionality and models have been introduced and an update to the SNAP MELCOR plugin user interface is necessary to access these new features. This document relates all new features introduced into MELCOR to the development team at APT as well as the NRC.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

MC-15 Users Manual

The current iteration of field -capable neutron multiplicity counters is the Multiplicity Counter 15 tube detector (MC-15) shown in Figure 1. This was a tri-lab effort between Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratories (SNL). The MC-15 incorporates significant improvements over previous man-portable neutron multiplicity counters of the LANL NPOD and the Ortec Fission Meter™. These improvements include finer time resolution of 100 ns, more advanced on-board computing power for near-real-time onboard analysis, a sunlight readable color touchscreen for ease of use, a USB 2.0 interface for data transfer, and hot-swappable rechargeable batteries that provide 14 hours of run time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Detecing Surface Change Created by an Underground Chemical Explosion Using Fully Polarimetric VideoSAR

Sandia National Laboratories (SNL) flew its Facility for Advanced RF and Algorithm Development (FARAD) X-Band (9.6 GHz center frequency), fully-polarimetric synthetic aperture radar (PolSAR) in VideoSAR-mode to collect complex-valued SAR imagery before, during, and after the fifth and sixth Source Physics Experiment's (SPE-5 and SPE-6) underground explosion. The results from the fifth Source Physics Experiment (SPE-5) used single-polarimetric VideoSAR data while SPE-6 used single and fully-polarimetric VideoSAR data. We show that SAR can provide surface change products indicative of disturbances caused by the underground chemical explosions. These are surface coherence measures, Po1SAR change signatures, and differential interferometric SAR (InSAR) height change.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Building 1090 Modifications Lessons Learned

The purpose of this document is to capture and disseminate lessons learned from the Sandia National Laboratories (SNL) Building 1090 modification project that took place from 2013 to 2018. The following sections summarize the drivers, issues encountered and lessons learned at each phase in the project.

99 GENERAL AND MISCELLANEOUS↗

Recompression Closed Brayton Cycle Control Options Nuclear Science

The attractive performance of the S-CO 2 recompression cycle arises from the thermo-physical properties of carbon dioxide near the critical point. However, to ensure efficient operation of the cycle near the critical point, precise control of the heat removal rate by the pre-cooler upstream of the main compressor is required. With respect to the S-CO 2 recompression cycle at SNL, presently an operator is tasked with manually adjusting the opening of the valve that governs the water flow rate through the pre-cooler. This report describes a procedure to design an automatic controller that uses the water flow rate as a controlling variable to regulate the S-CO 2 temperature at the pre-cooler outlet. The work relies on the GPASS control-oriented model of the pre-cooler developed last year. A model-based approach is used to design a PI (Proportional-Integral) controller. Then a transfer function describing the influence of the water flow rate on the S-CO 2 outlet temperature is derived from the pre-cooler model. Suitable values for the controller gains are then derived and finally the gains are tested on the initial time-discrete non-linear model.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Focal Plane Array Low Background Testing (Focal Plane Array Characterization under a Low Background)

Most infra-red (IR) imagers for tactical applications use a direct injection (DI) input amplifier design. Fewer transistors in the unit cell allow the read-out electronic circuit (ROIC) to be minimized. This allows either more room for charge integration capacitors or finer pixel pitches. These ROICs work well at high background irradiance levels. However, at low background irradiance levels photocurrent inject efficiency for a DI unit cell amplifier is reduced. Some models have shown that this efficiency can drastically affect performance under low background conditions. The main benefit for Sandia National Laboratories (SNL) and L-3 Communications Cincinnati Electronics (L-3) was a better understanding of these types of sensors under low background conditions. It also provided the opportunity for an independent analysis of these sensors. The purpose of this project was to measure DI for low light levels under different operating temperatures of the L-3 CE103 a 1280 x 1024 indium antimonide 15 micron pitch detector. Results showed DI efficiency approaches 75% under extremely low light levels. Additionally, measured data didn't conform well to traditional circuit based models indicated that other effects are contributing to DI efficiency. A "spot scanning" PSF measurement was also conducted to measure pixel-to-pixel crosstalk for this array. Spot scanning data showed near ideal performance.

47 OTHER INSTRUMENTATION↗

Silicon Photonics for Government Applications

The purpose of the PTS was to jointly develop integrated photonics for use in Lockheed Martin Corporation's (LMC's) applications. Principally, Sandia National Laboratories (SNL) assisted LMC with silicon photonics designs and fabricated and delivered silicon photonics devices and sub-systems realizing those designs for LMC to test and evaluate. The benefits of using silicon photonics in these applications is lower size, weight, power, and cost for U.S. defense systems.

42 ENGINEERING↗

Bird-Strike Analysis Using Eulerian Peridynamic Formulation

The purpose of this project between Sandia National Laboratories (SNL) and The Boeing Company (Boeing) was to develop an analysis capability for predicting the loads on aircraft structures due to the inflight impact of birds. The main technical accomplishment was the development and delivery to Boeing of a new software tool that predicts the pressure over a structure's surface area, as a function of time and impact conditions, during the impact. The benefit to Boeing, and to government agencies such as NASA and the FAA, is an accurate tool to help design structures to withstand potentially catastrophic damage due to bird strike.

42 ENGINEERING↗

Solar Driven Supercritical CO 2 Brayton Cycle Testing (CSP)

Sandia National Laboratories (SNL) provided design, modeling, and analysis to support Commonwealth Scientific and Industrial Research Organization's (CSIRO's) efforts to develop a receiver system for solarized supercritical CO 2 (SCO@) Brayton cycles. A solarized sCO2 power cycle is being pursued by both the U.S. DOE and the Australian government as a means to enable renewable, dispatchable electricity with low costs and high efficiency, which will improve reliability and resiliency of both nations' energy grids. Results of this work provided annualized thermal efficiencies for an intermediate-scale falling particles receiver that can be used as the basis for a direct sCO2 receiver design that is being pursued by CSIRO. In addition, different particle-receiver configurations were analyzed to investigate large-scale designs up to ~100 MW e .

42 ENGINEERING↗

Project Accomplishments Summary - SC03/01672.04.0. Flow, Thermal Evolution, and Electrochemistry in Layered Poroelastic Materials

Sandia National Laboratories (SNL) and the Procter and Gamble Company (P&G), which eventually spun off The Duracell Company (Duracell) to Berkshire Hathaway, collaborated to develop a computational tool that predicts the in-use and manufacturing-process performance of consumer electrical energy storage devices. This computational tool was particularly useful in exploring the effects of material microstructure, device configuration/geometry, manufacturing and manufacturing defects on product performance.

36 MATERIALS SCIENCE↗

FY 18 Status Report on the Computing Systems for the Yucca Mountain Project TSPA-LA Models and Inventory of Software used for Process Models

Sandia National Laboratories (SNL) continued evaluation of total system performance assessment (TSPA) computing systems for the previously considered Yucca Mountain Project (YMP). This was done to maintain the operational readiness of the computing infrastructure (computer hardware and software) and knowledge capability for total system performance assessment (TSPA) type analysis, as directed by the National Nuclear Security Administration (NNSA), DOE 2010. This work is a continuation of the ongoing readiness evaluation reported in Lee and Hadgu (2014), Hadgu et al. (2015) and Hadgu and Appel (2016), and Hadgu et al. (2017). The TSPA computing hardware (2014 server cluster -CL2014) and storage system described in Hadgu et al. (2015) were used for the current analysis. One floating license of Gold Sim with Versions 9.60.300, 10.5, 11.1 and 12.0 was installed on the cluster head node, and its distributed processing capability was mapped on the cluster processors. Other supporting software were tested and installed to support the TSPA-type analysis on the server cluster. The FY18 task included developing an inventory of software used for the Yucca Mountain Project process models and preliminary assessment of status of the software; enhancing security of the cluster and setting a backup system. The 2014 server cluster and supporting software systems are fully operational to support TSPA-LA type analysis.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Photovoltaic Microinverter Testbed for Multiple Device Interoperability

IEEE Standard 1547-2003 conformance of several interconnected microinverters was performed by Sandia National Laboratories (SNL) to determine if there were emergent adverse behaviors of co-located aggregated distributed energy resources. Experiments demonstrated the certification tests could be expanded for multi-manufacturer microinverter interoperability. Evaluations determined the microinverters' response to abnormal conditions in voltage and frequency, interruption in grid service, and cumulative power quality. No issues were identified to be caused by the interconnection of multiple devices.

42 ENGINEERING↗