SEARCH · Engineering Papers

Results for “SHEAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Modeling and calculation of turbulent transport in free-shear flows

In this work the applicability of the combined bulk convection and gradient transport hypotheses for modeling turbulent diffusion is investigated. The resulting model equation, namely the one-equation model, is solved for free-shear flows by an implicit finite-difference method. Results indicate that significant improvements over previous models can be achieved with this new formulation of turbulent diffusion for both heat and momentum transport.

Biringen, S.↗

NASA NTRS1987

Investigation of turbulent shear flows by numerical simulation

A data base (Kim et al., 1986) generated by direct numerical integration of the Navier-Stokes equations for unsteady three-dimensional turbulent channel flow at low Reynolds numbers is applied to investigate the physical processes acting in wall-bounded shear flows. The techniques used to construct the data base are outlined; the modeling of turbulence, streaks and streamwise vortices, horseshoe and inverted-horseshoe vortices, and vortex rings is described; the conditional sampling techniques employed are discussed; and typical results are presented graphically. An organized vorticity-field structure is revealed and found to be associated with the bursting process and a local peak in the wall pressure, indicating a possible approach to reducing viscous drag.

Kim, J.↗

NASA NTRS1987

Heating of ionospheric O(+) ions by shear Alfven waves

Ionospheric ions, in particular O(+) ions, which have been transversely heated, are often observed flowing upward along auroral field lines. A new mechanism, heating by current-driven shear (or kinetic) Alfven waves (SAW), is proposed. An electron current drives oblique SAWs unstable near a wave frequency of about the oxygen cyclotron frequency, and these waves are in turn gyroresonantly absorbed by the ions. The mechanism is similar to ion heating by current-driven electrostatic ion cyclotron waves (EICW). However, the SAW differs from the EICW in that as the perpendicular temperature of the ions increases, growth of the SAW can still occur, whereas growth of the EICW becomes suppressed. As a consequence, the SAW is able to provide sustained perpendicular heating of ions with smaller currents being required for the heating than for heating via EICWs.

Winglee, R. M.↗

NASA NTRS1987

Some observations of a sheared Rayleigh-Taylor/Benard instability

An account is provided of preliminary flow visualization observations made in an unstably stratified flow with shear superimposed. The structures observed appear to be the superposition of a Rayleigh-Taylor/Benard instability and a Kelvin-Helmholtz instability. Aside from its intrinsic fundamental value, the study of these structures is of special interest to theoreticians developing nonlinear stability calculation methodologies.

Humphrey, J. A. C.↗

NASA NTRS1987

Nonlinear radiative condensation in a sheared magnetic field

A well-resolved two-dimensional nonlinear numerical simulation of the radiative/thermal instability in a sheared magnetic field is described which leads to filament formation. The condensation is initiated by a linearly unstable mode and widens until it is slowed by thermal conduction parallel to B. During the nonlinear evolution, the minimum temperature falls from 10 to the 6th K to 10 to the 4th K and eventually reaches a state of local thermal equilibrium in about five e-folding times.

Van Hoven, G.↗

NASA NTRS1987

Current status of the Iosipescu shear test method

During the past several years, considerable study of the Iosipescu shear test method has been conducted by a number of investigators, including the present authors. Several different test fixture designs have been developed, and variations of the specimen size and notch configuration have been considered. Materials with properties ranging from isotropic to highly orthotropic have been tested. The response of such materials has also been predicted using finite element techniques, and attempts have been made to correlate these predictions with available experimental data. This recent work is summarized here, with particular emphasis being given to the correlations and contradictions resulting from the published works of these various investigators.

Adams, Donald F.↗

NASA NTRS1986

Shear stress cleaning for surface departiculation

A cleaning technique widely used by the nuclear utility industry for removal of radioactive surface contamination has proven effective at removing non-hazardous contaminant particles as small as 0.1 micrometer. The process employs a controlled high velocity liquid spray inside a vapor containment enclosure to remove particles from a surface. The viscous drag force generated by the cleaning fluid applies a shear stress greater than the adhesion force that holds small particles to a substrate. Fluid mechanics and field tests indicate general cleaning parameters.

Musselman, R. P.↗

NASA NTRS1987

Improving the interlaminar shear strength of carbon fiber-epoxy composites through carbon fiber bromination

The use of bromine to improve the interlaminar shear strength of PAN-based carbon fibers was investigated. Composite test specimens fabicated from brominated T-300 fibers and a MY720 matrix exhibited on average a 30% improvement in ILSS over their pristine counterparts. Mass, electrical resistivity, density, contact angle, and scanning Auger microscopy results suggested a mechanism in which the bromine was covalently bonded to the surface of the fiber, and this resulted in an increased van der Waal's adhesion between fiber and matrix.

Jaworske, Donald A.↗

NASA NTRS1987

Shear and mixing effects on cells in agitated microcarrier tissue culture reactors

Tissue cells are known to be sensitive to mechanical stresses imposed on them by agitation in bioreactors. The amount of agitation provided in a microcarrier or suspension bioreactor should be only enough to provide effective homogeneity. Three distinct flow regions can be identified in the reactor: bulk turbulent flow, bulk laminar flow and boundary-layer flows. Possible mechanisms of cell damage are examined by analyzing the motion of microcarriers or free cells relative to the surrounding fluid, to each other and to moving or stationary solid surfaces. The primary mechanisms of cell damage appear to result from: (1) direct interaction between microcarriers and turbulent eddies; (2) collisions between microcarriers in turbulent flow; and (3) collisions against the impeller or other stationary surfaces. If the smallest eddies of turbulent flow are of the same size as the microcarrier beads, they may cause high shear stresses on the cells. Eddies the size of the average interbead spacing may cause bead-bead collisions which damage cells. The severity of the collisions increases when the eddies are also of the same size as the beads. Impeller collisions occur when beads cannot avoid the impeller leading edge as it advances through the liquid. The implications of the results of this analysis on the design and operation of tissue culture reactors are discussed.

Cherry, Robert S.↗

NASA NTRS1988

Airborne Wind Shear Detection and Warning Systems: First Combined Manufacturers' and Technologists' Conference

The purpose of the meeting was to transfer significant, ongoing results gained during the first year of the joint NASA/FAA Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-looking technology concepts and for technologists to gain an understanding of FAA certification requirements and the problems encountered by the manufacturers during the development of airborne equipment.

Spady, Amos A., Jr.↗

NASA NTRS1988

NASA wind shear model: Summary of model analyses

A summary of an analysis of a wind shear model is presented in the form of vugraphs. Information is given on the Terminal Area Simulation System, two dimensional axisymmetric simulations, precipitation, ambient temperature and humidity profiles over Denver, and the structure of microbursts. It was concluded that the intensity of microbursts depends upon the environment temperature and humidity profile, the diameter of the microburst downdraft, the type of precipitation and the precipitation rate. The depth of the outflow layer depends primarily upon the diameter of the downdraft. Dry microbursts are more likely to be produced by precipitation initially falling as snow.

Proctor, Fred↗

NASA NTRS1988

Wind shear radar simulation

Viewgraphs used in a presentation on wind shear radar simulation are given. Information on a microburst model of radar reflectivity and wind velocity, radar pulse output, the calculation of radar return, microburst power spectrum, and simulation plans are given. A question and answer session is transcribed.

Britt, Charles L.↗

NASA NTRS1988

Airborne Doppler lidar detection of wind shear. Results of performance analysis

Results of a performance analysis of an airborne Doppler radar wind shear detection system are given in vugraph form. It was concluded that both CO sub 2 and Ho:YAG lasers are feasible for dry microburst applications, but with limited performance in wet microbursts. The Ho:YAG performs better than the CO sub 2 for a set of identical lidar parameters.

Huffaker, R. Milton↗

NASA NTRS1988

Infrared low-level wind shear work

Results of field experiments for the detection of clear air disturbance and low level wind shear utilizing an infrared airborne system are given in vugraph form. The hits, misses and nuisance alarms scores are given. Information is given on the infrared spatial resolution technique. The popular index of aircraft hazard (F= WX over g - VN over AS) is developed for a remote temperature sensor.

Adamson, Pat↗

NASA NTRS1988

Forward looking wind shear detection

Information on forward looking wind shear detection is presented in vugraph form. Information is given on system concept development, signal characterization, the field test program, typical radiance fluctuations vs time and radiometric temperatures vs azimuth headings.

Source record↗

NASA NTRS1988

Simulator investigation of wind shear recovery techniques

The objective was the development of practical flight procedures and guidance for near-optimal trajectories during inadvertent wind shear encounters following takeoff. The approach was to conduct preliminary development of candidate strategies using batch simulation of the point mass B737-100 performance model and to evaluate candidate guidance strategies in piloted, real time, six degrees of freedom simulation.

Hinton, David A.↗

NASA NTRS1988

Are windshear training aid recommendations appropriate for other than large jet transports? Pilot procedures: Shear models

Information is given in vugraph form on pilot procedures in windshear, typical winds in a downburst, a downburst encounter at takeoff by a large jet transport and a light turboprop twin, and a comparison of pitch algorithms in an approach encounter with downburst shear. It is observed that the light turboprop appears no less tolerant of a downburst encounter than the large jet.

Bray, R. S.↗

NASA NTRS1988

Time-accurate simulations of a shear layer forced at a single frequency

Calculations are presented for the forced shear layer studied experimentally by Oster and Wygnanski, and Weisbrot. Two different computational approaches are examined: Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES). The DNS approach solves the full three dimensional Navier-Stokes equations for a temporally evolving mixing layer, while the LES approach solves the two dimensional Navier-Stokes equations with a subgrid scale turbulence model. While the comparison between these calculations and experimental data was hampered by a lack of information on the inflow boundary conditions, the calculations are shown to qualitatively agree with several aspects of the experiment. The sensitivity of these calculations to factors such as mesh refinement and Reynolds number is illustrated.

Claus, R. W.↗