Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Relative accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Advances in Resin Management Using 3R-Scan - 20154

The most important factor underlying optimal waste management is developing a clear picture of the radioactivity content of the waste and its impact on waste disposal cost. For over 35 years since the publishing of 10CFR61, waste characterization has relied on sampling the final waste product after formation. In the days following 10CFR61, the cost of final disposal was marginal with only a small impact on the overall costs. Constraints were added by provisions of the Low Level Waste Policy Act of 1985 leading to increasingly limited access to those disposal sites that remained available. In addition, Nuclear Regulatory Commission (NRC) pressure promoting waste volume reduction led to disposal costs inevitably rising. Despite this, characterization practices in monitoring of waste generation for activity content still center on the same dated processes. This results in a disposal classification on the basis of endpoint sampling without consideration of the homogeneity of the waste mixture. It can also disregard consideration of the representativeness of the single or small sample base. As a minimum effort, a formalized sampling program of a fixed grouping of waste streams can be implemented that could account for more than 95% of all of the activity carried in solid waste products. The sample results for each radionuclide could then be trended as time passes to develop reasonable scaling factors for difficult to measure radionuclides. This process, identified in NRC guidance, has been rigorously followed by a relatively small number of facilities. The trended scaling factors serve to improve accuracy by identifying anomalous results that could otherwise go undetected. Direct monitoring of the accumulation of activity in process streams generating solid radwaste, including demineralizers and filter streams, is a more precise approach. Nearly all of these streams are monitored by plant chemistry on a regular schedule to maintain water quality. This paper discusses viable options for developing the basis for characterization through process monitoring of the accumulation of activity at the point of generation. Special focus is on resin bed tracking and how process knowledge of these streams can be brought together to form a consistent and precise solid waste radioactivity inventory. Some of the specific points covered in this paper include the merger of the fission product release computer program, 3R-STAT, with the radwaste sample analysis computer program, SCAN4 to create 3R-SCAN, the importance of individual waste stream influences on the overall source term, and the use of historic sample data to develop scaling factors using an automated process. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1991

Measuring the effects of distributed database models on transaction availability measures

Data distribution, data replication, and system reliability are key factors in determining the availability measures for transactions in distributed database systems. In order to simplify the evaluation of these measures, database designers and researchers tend to make unrealistic assumptions about these factors. Here, the effect of such assumptions on the computational complexity and accuracy of such evaluations is investigated. A database system is represented with five parameters related to the above factors. Probabilistic analysis is employed to evaluate the availability of read-one and read-write transactions. Both the read-one/write-all and the majority-read/majority-write replication control policies are considered. It is concluded that transaction availability is more sensitive to variations in degrees of replication, less sensitive to data distribution, and insensitive to reliability variations in a heterogeneous system. The computational complexity of the evaluations is found to be mainly determined by the chosen distributed database model, while the accuracy of the results are not so much dependent on the models.

Mukkamala, Ravi↗
DOE OSTI2021

Hybrid gausslet/Gaussian basis sets

We introduce hybrid gausslet/Gaussian basis sets, where a standard Gaussian basis is added to a gausslet basis in order to increase accuracy near the nuclei while keeping the spacing of the grid of gausslets relatively large. The Gaussians are orthogonalized to the gausslets, which are already orthonormal, and approximations are introduced to maintain the diagonal property of the two electron part of the Hamiltonian so that it continues to scale as the second power of the number of basis functions rather than the fourth. We introduce several corrections to the Hamiltonian designed to enforce certain exact properties, such as the values of certain two-electron integrals. We also introduce a simple universal energy correction that compensates for the incompleteness of the basis stemming from the electron–electron cusps based on the measured double occupancy of each basis function. We perform a number of Hartree Fock and full configuration interaction (full-CI) test calculations on two electron systems and Hartree Fock on a ten-atom hydrogen chain to benchmark these techniques. The inclusion of the cusp correction allows us to obtain complete basis set full-CI results for the two electron cases at the level of several micro-Hartrees, and we see similar apparent accuracy for Hartree Fock on the ten-atom hydrogen chain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1972

Relative motion of orbiting satellites

The relative motion problem is analyzed, as a linearized case, and as a numerically determined solution to provide a time history of the geometries representing the motion state. The displacement history and the hodographs for families of solutions are provided, analytically and graphically, to serve as an aid to understanding this problem area. Linearized solutions to relative motion problems of orbiting particles are presented for the impulsive and fixed thrust cases. Second order solutions are described to enhance the accuracy of prediction. A method was developed to obtain accurate, numerical solutions to the intercept and rendezvous problem; and, special situations are examined. A particular problem related to relative motions, where the motion traces develop a cusp, is examined in detail. This phenomenon is found to be dependent on a particular relationship between orbital eccentricity and the inclination between orbital planes. These conditions are determined, and, example situations are presented and discussed.

Eades, J. B., Jr.↗
NASA NTRS2004

CDGPS-Based Relative Navigation for Multiple Spacecraft

This thesis investigates the use of Carrier-phase Differential GPS (CDGPS) in relative navigation filters for formation flying spacecraft. This work analyzes the relationship between the Extended Kalman Filter (EKF) design parameters and the resulting estimation accuracies, and in particular, the effect of the process and measurement noises on the semimajor axis error. This analysis clearly demonstrates that CDGPS-based relative navigation Kalman filters yield good estimation performance without satisfying the strong correlation property that previous work had associated with "good" navigation filters. Several examples are presented to show that the Kalman filter can be forced to create solutions with stronger correlations, but these always result in larger semimajor axis errors. These linear and nonlinear simulations also demonstrated the crucial role of the process noise in determining the semimajor axis knowledge. More sophisticated nonlinear models were included to reduce the propagation error in the estimator, but for long time steps and large separations, the EKF, which only uses a linearized covariance propagation, yielded very poor performance. In contrast, the CDGPS-based Unscented Kalman relative navigation Filter (UKF) handled the dynamic and measurement nonlinearities much better and yielded far superior performance than the EKF. The UKF produced good estimates for scenarios with long baselines and time steps for which the EKF would diverge rapidly. A hardware-in-the-loop testbed that is compatible with the Spirent Simulator at NASA GSFC was developed to provide a very flexible and robust capability for demonstrating CDGPS technologies in closed-loop. This extended previous work to implement the decentralized relative navigation algorithms in real time.

Mitchell, Megan Leigh↗
DOE OSTI2022

Characterizing Tradeoffs in Memory, Accuracy, and Speed for Chemistry Tabulation Techniques

Chemistry tabulation is a common approach in practical simulations of turbulent combustion at engineering scales. Linear interpolants have traditionally been used for accessing precomputed multidimensional tables but suffer from large memory requirements and discontinuous derivatives. Higher-degree interpolants address some of these restrictions but are similarly limited to relatively low-dimensional tabulation. Artificial neural networks (ANNs) can be used to overcome these limitations but cannot guarantee the same accuracy as interpolants and introduce challenges in reproducibility and reliable training. These challenges are enhanced as the physics complexity to be represented within the tabulation increases. Here, we assess the efficiency, accuracy, and memory requirements of Lagrange polynomials, tensor product B-splines, and ANNs as tabulation strategies. We analyze results in the context of nonadiabatic flamelet modeling where higher dimension counts are necessary. While ANNs do not require structuring of data, providing benefits for complex physics representation, interpolation approaches often rely on some structuring of the table. Interpolation using structured table inputs that are not directly related to the variables transported in a simulation can incur additional query costs. This is demonstrated in the present implementation of heat losses. We show that ANNs, despite being difficult to train and reproduce, can be advantageous for high-dimensional, unstructured datasets relevant to nonadiabatic flamelet models. Furthermore we demonstrate that Lagrange polynomials show significant speedup for similar accuracy compared to B-splines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Coastal Zone Classification from Satellite Imagery

The author has identified the following significant results. Studies of cover distribution along Delaware's coast, especially in tidal wetlands, were made utilizing semi-automated analysis of LANDSAT-1 MSS digital data. Cover maps with eleven vegetation and other cover categories were produced with accuracy of identification above 80% in all categories. Recent studies have tested a new technique for training automated analysis which uses ground measured reflectance and atmospheric correction techniques to derive signatures for specific categories in preference to the relative radiance signatures derived from training sets within the LANDSAT data itself. Initial tests using a four category scheme indicate that training data based on absolute measured reflectance and atmospheric correction of LANDSAT data can produce comparable accuracy of categorization to that achieved using more conventional relative radiance training.

Klemas, V.↗
NASA NTRS2001

Accuracy of Pressure Sensitive Paint

Uncertainty in pressure sensitive paint (PSP) measurement is investigated from a standpoint of system modeling. A functional relation between the imaging system output and luminescent emission from PSP is obtained based on studies of radiative energy transports in PSP and photodetector response to luminescence. This relation provides insights into physical origins of various elemental error sources and allows estimate of the total PSP measurement uncertainty contributed by the elemental errors. The elemental errors and their sensitivity coefficients in the error propagation equation are evaluated. Useful formulas are given for the minimum pressure uncertainty that PSP can possibly achieve and the upper bounds of the elemental errors to meet required pressure accuracy. An instructive example of a Joukowsky airfoil in subsonic flows is given to illustrate uncertainty estimates in PSP measurements.

Liu, Tianshu↗
NASA NTRS1992

Structural dynamics and vibrations of damped, aircraft-type structures

Engineering preliminary design methods for approximating and predicting the effects of viscous or equivalent viscous-type damping treatments on the free and forced vibration of lightly damped aircraft-type structures are developed. Similar developments are presented for dynamic hysteresis viscoelastic-type damping treatments. It is shown by both engineering analysis and numerical illustrations that the intermodal coupling of the undamped modes arising from the introduction of damping may be neglected in applying these preliminary design methods, except when dissimilar modes of these lightly damped, complex aircraft-type structures have identical or nearly identical natural frequencies. In such cases, it is shown that a relatively simple, additional interaction calculation between pairs of modes exhibiting this 'modal response' phenomenon suffices in the prediction of interacting modal damping fractions. The accuracy of the methods is shown to be very good to excellent, depending on the normal natural frequency separation of the system modes, thereby permitting a relatively simple preliminary design approach. This approach is shown to be a natural precursor to elaborate finite element, digital computer design computations in evaluating the type, quantity, and location of damping treatment.

Young, Maurice I.↗
NASA NTRS1972

Optimal utilization of total elastic scattering cross section data for the determination of interatomic potentials

The problem of inversion is considered in relation to absolute total cross sections Q(v) for atom-atom collisions and their velocity dependence, and the glory undulations and the transition to high velocity behavior. There is a limit to the amount of information available from Q(v) even when observations of good accuracy (e.g., + or - 0.25%) are in hand over an extended energy range (from thermal energies upward by a factor of greater than 1000 in relative kinetic energy). Methods were developed for data utilization, which take full advantage of the accuracy of the experimental Q(v) measurements.

Bernstein, R. B.↗
DOE OSTI2023

Improving initialization and evolution accuracy of cosmological neutrino simulations

Neutrino mass constraints are a primary focus of current and future large-scale structure (LSS) surveys. Non-linear LSS models rely heavily on cosmological simulations — the impact of massive neutrinos should therefore be included in these simulations in a realistic, computationally tractable, and controlled manner. Here, a recent proposal to reduce the related computational cost employs a symmetric neutrino momentum sampling strategy in the initial conditions. We implement a modified version of this strategy into the Hardware/Hybrid Accelerated Cosmology Code (HACC) and perform convergence tests on its internal parameters. We illustrate that this method can impart Script $\mathcal{O}$(1%) numerical artifacts on the total matter field on small scales, similar to previous findings, and present a method to remove these artifacts using Fourier-space filtering of the neutrino density field. Moreover, we show that the converged neutrino power spectrum does not follow linear theory predictions on relatively large scales at early times at the 15% level, prompting a more careful study of systematics in particle-based neutrino simulations. We also present an improved method for backscaling linear transfer functions for initial conditions in massive neutrino cosmologies that is based on achieving the same relative neutrino growth as computed with Boltzmann solvers. Our self-consistent backscaling method yields sub-percent accuracy in the total matter growth function. Comparisons for the non-linear power spectrum with the Mira-Titan emulator at a neutrino mass of m ν = 0.15 eV are in very good agreement with the expected level of errors in the emulator and in the direct N-body simulation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Best Practices for Body Temperature Measurement with Infrared Thermography: External Factors Affecting Accuracy

Infrared thermographs (IRTs) are commonly used during disease pandemics to screen individuals with elevated body temperature (EBT). To address the limited research on external factors affecting IRT accuracy, we conducted benchtop measurements and computer simulations with two IRTs, with or without an external temperature reference source (ETRS) for temperature compensation. The combination of an IRT and an ETRS forms a screening thermograph (ST). We investigated the effects of viewing angle (θ, 0–75°), ETRS set temperature (T ETRS , 30–40 °C), ambient temperature (T atm , 18–32 °C), relative humidity (RH, 15–80%), and working distance (d, 0.4–2.8 m). We discovered that STs exhibited higher accuracy compared to IRTs alone. Across the tested ranges of T atm and RH, both IRTs exhibited absolute measurement errors of less than 0.97 °C, while both STs maintained absolute measurement errors of less than 0.12 °C. The optimal T ETRS for EBT detection was 36–37 °C. When θ was below 30°, the two STs underestimated calibration source (CS) temperature (T CS ) of less than 0.05 °C. The computer simulations showed absolute temperature differences of up to 0.28 °C and 0.04 °C between estimated and theoretical temperatures for IRTs and STs, respectively, considering d of 0.2–3.0 m, T atm of 15–35 °C, and RH of 5–95%. The results highlight the importance of precise calibration and environmental control for reliable temperature readings and suggest proper ranges for these factors, aiming to enhance current standard documents and best practice guidelines. These insights enhance our understanding of IRT performance and their sensitivity to various factors, thereby facilitating the development of best practices for accurate EBT measurement.

47 OTHER INSTRUMENTATION↗
NASA NTRS1975

Higher order accurate difference solutions of fluid mechanics problems by a compact differencing technique

A general fourth order differencing scheme is developed and applied to three viscous test problems to verify the accuracy and applicability of the technique. The procedure is atypical since only three nodes are necessary to obtain the desired fourth order accuracy. This is accomplished by a differencing technique which considers the function and all necessary derivatives as unknowns. The relations for these derivatives yield simple tridiagonal equations which can be easily solved. Comparisons of the fourth order results with those computed using second order methods are presented for the test problems and clearly indicate that the accuracy achieved by these fourth order computations is always significantly better than current second order procedures.

Hirsh, R. S.↗
NASA NTRS1972

Effects of noise on the performance of a memory decision response task

An investigation has been made to determine the effects of noise on human performance. Fourteen subjects performed a memory-decision-response task in relative quiet and while listening to tape recorded noises. Analysis of the data obtained indicates that performance was degraded in the presence of noise. Significant increases in problem solution times were found for impulsive noise conditions as compared with times found for the no-noise condition. Performance accuracy was also degraded. Significantly more error responses occurred at higher noise levels; a direct or positive relation was found between error responses and noise level experienced by the subjects.

Lawton, B. W.↗
NASA NTRS1980

Investigation of transonic flow in a cascade using an adaptive mesh

The solution of two-dimensional full potential equation for the analysis of steady transonic flow through cascades is investigated. Finite element method is employed in the analysis. Accuracy and efficiency of the obtained numerical solutions are discussed in terms of the employed computational grid. Accurate modeling of subsonic and supersonic flow regions together with the shock is discussed. The choice of artificial viscosity and relaxation factors are examined and related to the design of a computational grid. Shock capturing and shock fitting procedures are compared for improved accuracy and efficiency. Numerical results include cascades of Gostelow and NACA 0012 airfoils.

Ecer, A.↗
DOE OSTI2019

Solar-Forecast GridAPPS-D Application [SWR-18-36]

Persistent model serves as the baseline in the intra-hour forecasting of solar radiation due to the extensive computing efforts from the numerical weather prediction (NWP) models and the lack of surface observations in cloud as well as other atmospheric properties. The smart persistent model actively updates the extraterrestrial solar radiation with time and is an important improvement from the persistent model while the cloud conditions are assumed unchanged by giving constant clear-sky indexes. We developed a Physics-based Smart Persistent model for Intra-hour solar forecasting (PSPI) to further improve the accuracy of the smart persistent model. We used a cloud retrieval technique developed by Xie and Liu (2013) to estimate cloudy fraction and cloud albedo using surface-based observations of solar radiation. The solar radiation in future time steps is accurately given by actively computing individual cloud albedo related to the future solar position. Our evaluation studies indicated that the PSPI model significantly increased the accuracy in the short-term forecast of solar radiation, especially in thin cloud conditions or those covered by broken clouds.

Xie, Yu↗
NASA NTRS1993

Satellite inventory of Minnesota forest resources

The methods and results of using Landsat Thematic Mapper (TM) data to classify and estimate the acreage of forest covertypes in northeastern Minnesota are described. Portions of six TM scenes covering five counties with a total area of 14,679 square miles were classified into six forest and five nonforest classes. The approach involved the integration of cluster sampling, image processing, and estimation. Using cluster sampling, 343 plots, each 88 acres in size, were photo interpreted and field mapped as a source of reference data for classifier training and calibration of the TM data classifications. Classification accuracies of up to 75 percent were achieved; most misclassification was between similar or related classes. An inverse method of calibration, based on the error rates obtained from the classifications of the cluster plots, was used to adjust the classification class proportions for classification errors. The resulting area estimates for total forest land in the five-county area were within 3 percent of the estimate made independently by the USDA Forest Service. Area estimates for conifer and hardwood forest types were within 0.8 and 6.0 percent respectively, of the Forest Service estimates. A trial of a second method of estimating the same classes as the Forest Service resulted in standard errors of 0.002 to 0.015. A study of the use of multidate TM data for change detection showed that forest canopy depletion, canopy increment, and no change could be identified with greater than 90 percent accuracy. The project results have been the basis for the Minnesota Department of Natural Resources and the Forest Service to define and begin to implement an annual system of forest inventory which utilizes Landsat TM data to detect changes in forest cover.

Bauer, Marvin E.↗
NASA NTRS1988

A new algorithm for modeling friction in dynamic mechanical systems

A method of modeling friction forces that impede the motion of parts of dynamic mechanical systems is described. Conventional methods in which the friction effect is assumed a constant force, or torque, in a direction opposite to the relative motion, are applicable only to those cases where applied forces are large in comparison to the friction, and where there is little interest in system behavior close to the times of transitions through zero velocity. An algorithm is described that provides accurate determination of friction forces over a wide range of applied force and velocity conditions. The method avoids the simulation errors resulting from a finite integration interval used in connection with a conventional friction model, as is the case in many digital computer-based simulations. The algorithm incorporates a predictive calculation based on initial conditions of motion, externally applied forces, inertia, and integration step size. The predictive calculation in connection with an external integration process provides an accurate determination of both static and Coulomb friction forces and resulting motions in dynamic simulations. Accuracy of the results is improved over that obtained with conventional methods and a relatively large integration step size is permitted. A function block for incorporation in a specific simulation program is described. The general form of the algorithm facilitates implementation with various programming languages such as FORTRAN or C, as well as with other simulation programs.

Hill, R. E.↗